JL Audio XDM Marine Amplifier 3-Channel 500 Watt 12v

$649.99

MFG: 010-03343-00

In stock

SKU: WT-JLA0100334300 Categories: , ,
Description

JL Audio XDM500/3 3 Ch. Class D, Car/Marine System Amplifier, 500 W

Model: XDM500/3

Small enough to fit in just about any tight space application, the XDM500/3 is the perfect amplifier for a simple audiophile-grade, subwoofer / satellite system. With its three channels of versatile output, you can drive a pair of quality component speaker systems with plenty of clean power, while also delivering a stout 300 W to your subwoofer system. The technology that makes this much power possible in such a small chassis is our advanced NexD™ switching amplifier design.

Suitable for car or boat installations, the XDM500/3 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.

The XDM500/3 includes a 12 dB / octave high-pass filter for its main channels, plus a variable slope low-pass filter for its subwoofer channel. Both filters offer continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of all amplifier channels or just the subwoofer channel directly from the driver’s seat or helm.

Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.

Specifications

Rated Continuous (RMS) Power @ 14.4 V
Main Channels @ 4 ohms75 W RMS x 2
Main Channels @ 2 ohms100 W RMS x 2
Main Channels – Bridged @ 4ohms200 W RMS x 1
Subwoofer Channel @ 4 ohms180 W RMS x 1
Subwoofer Channel @ 3 ohms240 W RMS x 1
Subwoofer Channel @ 2 ohms300 W RMS x 1
Subwoofer Channel @ 1.5 ohmsN/A
Rated Continuous (RMS) Power @ 12.5 V
Main Channels @ 4 ohms60 W RMS x 2
Main Channels @ 2 ohms90 W RMS x 2
Main Channels – Bridged @ 4ohms180 W RMS x 1
Subwoofer Channel @ 4 ohms180 W RMS x 1
Subwoofer Channel @ 3 ohms240 W RMS x 1
Subwoofer Channel @ 2 ohms300 W RMS x 1
Subwoofer Channel @ 1.5 ohmsN/A
Frequency Response (Main Channels)12 Hz – 22 kHz (+0, -1dB)
Frequency Response (Subwoofer Channel)10 Hz – 1 kHz (+0, -1dB)
S/N Ratio, referred to highest rated power (Main Channels)>104 dB below rated power (A-weighted, 20 Hz – 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W>84 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth)
Damping Factor @ 4 ohms>120 / 50 Hz
Damping Factor @ 2 ohms>60 / 50 Hz
THD+N @ Rated Power (Main Channels)<1% @ 2 ohms per Ch.
THD+N @ Rated Power (Subwoofer Channels)<1% @ 2 ohms per Ch.
Input Voltage Range @ RCA Inputs200 mV – 4 V RMS
Min.Copper Power / Ground Wire Gauge4 AWG wire
Rating50 A (AFS, AGU or MaxiFuse™)
Signal Processing
Filter Mode(s): Channels 1 & 2 (front)High-Pass only
Filter Slope(s): Channels 1 & 2 (front)12 dB/octave
Filter Frequency Range: Channels 1 & 2 (front)50 Hz – 500 Hz
Filter Mode(s): Channels 3 & 4 (rear)N/A
Filter Slope(s): Channels 3 & 4 (rear)N/A
Filter Frequency Range: Channels 3 & 4N/A
Filter Mode(s): Subwoofer ChannelLow-Pass only
Filter Slope(s): Subwoofer Channel12/24 dB/octave
Filter Frequency Range: Subwoofer Channel50 Hz – 500 Hz
Detented, Calibrated Filter Freq. PotentiometersYes
Filter Defeat FunctionYes
Infrasonic Filter: Subwoofer Channelnone
Remote Level ControlOptional HD-RLC or MHD-RLC (water-resistant)
Remote Level ModesSub Ch. or All Channels
Channel Input Mode SwitchYes (2/4 ch.)
Pass-Through Preamp OutputBuffered
Source Channel Selection for PreOutsYes (1&2/Sum/Sub)
Height2.05 in / 52 mm
Width (W)8.52 in / 216 mm
Depth (D)7.09 in / 180 mm
Net Weight4.8 lb / 2.18 kg

What’s in the Box:

  • XDM500/3 Amp
  • Wrench
  • Badge
Additional information
Weight 6 lbs
Brand

Brand

JL Audio

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.