Sort by
‚ÄãFaria Chesapeake White SS 4″ Speedometer w/LCD Heading Display – 80MPH (GPS)
Chesapeake White SS 4" Speedometer w/LCD Heading Display - 80MPH (GPS)
Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.
The GPS Speedometer is a drop in replacement for your current speedometer to match your existing instrument dash.
GPS information is gathered from an internal GPS antenna. No external antenna required. The Faria GPS Speedometer uses a highly accurate 48 channel GPS receiver. You can be sure that the Faria GPS Speedometer is giving you the most accurate GPS information available on the market today.
Course Over Ground (COG) and actual heading (compass heading over ground) are displayed on the digital LCD.
Speed data is shown by an analog pointer. This pointer is driven by a digital stepper motor for increased accuracy and minimized pointer bounce during vessel operation.
Benefits:
- No external GPS antenna required
- Ultra fast Satellite acquisition time (TTFF) 1 second from Hot start
- Speed Accuracy of +/- 1 MPH
- Heading Accuracy of +/- 1 Degree
- Ideal replacement for speed sensing devices (pitot tube and paddle wheel) that fail over time
- Perfect for slow moving vessels where pitot tubes just don't work
- Deutsch connectors
4"- Hole Size: 3.375" (85mm)
Specifications:
- Anti-scratch glass lens
- Perimeter lighted back light
- 12 VDC negative ground
- Can be adapted for 24 VDC systems
Factory P/N SGP010
*Sold as an Individual
**Gauge Cover not Included
Faria 12V to 24V Adapter f/Tachometers
Faria 2″ Heavy Duty Oil Pressure Gauge – 80 PSI – Black Dial & SS Bezel
2" Heavy Duty Oil Pressure Gauge - 100 PSI - Black Dial & SS Bezel
A pressure gauge operates by sending a low amperage current through the gauges' meter to the ground via a sending unit with variable resistance. The resistance of the sending units increases or decreases with the changes in pressure, temperature, etc...
As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the change in pressure.
Features:
- Anti-scratch glass lens
- Plastic Cases for corrosion resistance and long life
- 80 PSI
Factory P/N GP0830
Faria 2″ Heavy-Duty Ammeter (30-0-30) – Black
2" Heavy-Duty Ammeter (30-0-30) - Black
An ammeter indicates the current flow through the battery charging system. A "zero center" ammeter, during chargine, shows a (+) positive reading indicating the current is flowing to the battery (charge). A (-) negative reading indicates current flowing away from the battery (discharge).
Faria Performance Tips:
- Wiring - Due to the high current loads present in many ammeter applications, ammeters must be wired with wire not lighter than 10 AWG approved for Marine use.
Features:
- 2"
- Black
- Heavy-Duty
- 30-0-30
Faria 2″ Heavy-Duty Ammeter (60-0-60) – Black
2" Heavy-Duty Ammeter (60-0-60) - Black
An ammeter indicates the current flow through the battery charging system. A "zero center" ammeter, during chargine, shows a (+) positive reading indicating the current is flowing to the battery (charge). A (-) negative reading indicates current flowing away from the battery (discharge).
Faria Performance Tips:
- Wiring - Due to the high current loads present in many ammeter applications, ammeters must be wired with wire not lighter than 10 AWG approved for Marine use.
Features:
- 2"
- Black
- Heavy-Duty
- 60-0-60
Faria 2″ Heavy-Duty Oil Temp Gauge (140-320 F/C) – Black *Bulk Case of 24*
Faria 2″ Heavy-Duty Voltmeter (10-16 VDC) – Black
2" Heavy-Duty Voltmeter (10-16 VDC) - Black
Voltmeter Hole Size: 2" - Hole Size: 2.0625" (53mm)
A voltmeter indicates the battery voltage and the general condition of the battery charging system. The meter requires no warm-up and indicates voltage changes instantly.
Features:
- 2"
- Heavy-Duty
- 10-16 VDC
- Black
Faria 2″ Heavy-Duty Voltmeter (10-16 VDC) – Black w/Stainless Steel Bezel
2" Heavy-Duty Voltmeter (10-16 VDC) - Black with Stainless Steel Bezel
Voltmeter Hole Size: 2" - Hole Size: 2.0625" (53mm)
A voltmeter indicates the battery voltage and the general condition of the battery charging system. The meter requires no warm-up and indicates voltage changes instantly.
Features:
- 2"
- Heavy-Duty
- 10-16 VDC
- Black
Faria 2″ Heavy-Duty Voltmeter (14-32 VDC) – Black
2" Heavy-Duty Voltmeter (14-32 VDC) - Black
Voltmeter Hole Size: 2" - Hole Size: 2.0625" (53mm)
A voltmeter indicates the battery voltage and the general condition of the battery charging system. The meter requires no warm-up and indicates voltage changes instantly.
Features:
- 2"
- Heavy-Duty
- 14-32 VDC
- Black
Faria 2″ Heavy-Duty Water Temperature Gauge (100-250F) – Black
2" Heavy-Duty Water Temperature Gauge (100-250F) - Black
A temperature gauge operates by sending a low amperage current through the gauges's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...
As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the temperature.
Features:
- Black
- 100-250F
Faria 2″ Voltmeter (10-16 VDC) Unlit 12V Black w/Stainless Steel Bezel & Orange Pointer – Case of 24
2" Voltmeter (10-16 VDC) Unlit 12V Black w/Stainless Steel Bezel & Orange Pointer - Case of 24
Voltmeter Hole Size: 2" - Hole Size: 2.0625" (53mm)
A voltmeter indicates the battery voltage and the general condition of the battery charging system. The meter requires no warm-up and indicates voltage changes instantly.
Features:
- 2"
- Case of 24
- 10-16 VDC
- Black
- Stainless Steel Bezel
- Orange Pointer
Faria 2″ Water Temperature Gauge (100-200°F)
2" Water Temperature Gauge (100-200°F)
A temperature gauge operates by sending a low amperage current through the gauges meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...
As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the temperature.
Includes fire orange pointer, tall black aluminum bezel, flat glass lens, case with locator keyway to ensure proper installation and perimeter lighted black dial with stylish white graphics.
Available for MG systems, J1939 CAN Bus or J1939 Stand-Alone systems and mechanical types.
2" - Hole Size: 2.0625" (53mm)
Specifications:
- Standard (100-200°F)
- Scratch Resistant Lens
- Black Aluminum Bezel
- Orange Contoured Pointer