Showing 1–12 of 38 results

Beckson Handy-Mate Utility Pump – 16″

$59.40
Handy-Mate Utility Pump

Beckson's Handy-Mate pumps can be used around the home, car, RV or anywhere to handle routine and emergency pumping jobs. They are designed to handle all the routine pumping jobs, plus the unusual ones. They can pump water out of bilges, sump tanks and from one tank to another, or pump oil from inboard or stern drive or engine crankcases when it needs changing. A tube is provided to insert into the dipstick hole and the oil is quickly pumped out. The especially versatile 216PC pumps come with a kit of tubes, hoses, reducing foot and adapter. The Handy Mate is made entirely of tough marine plastic. It will not rust or corrode, is non-sparking for safety, and requires no priming to start pumping action. The pump body has a diameter of 1-1/2" (38mm), and it is fitted with a comfortable molded handle for easy, no-strain operation.

Features:
  • Length: 16" (40.6cm)
  • Diameter: 1-1/2" (38mm)
  • Pumps: 10 oz./stroke
  • Two intake tubes:
    • 36" (91.4cm) long x 1/2' (13mm)
    • 1/4" (7mm) x 36" (91.4cm) w/adptr

  • Flexible hose for water discharge:
    • 1-1/4" (45mm) x 24" (61cm)

  • Red discharge tube for oil:
      1-1/4" (45mm) x 10" (25mm)

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Beckson Siphon-Mate Pump f/Diesel, Oil, Water

$61.75
Siphon-Mate Siphon Pump
Specialty Transfer Pump

Safety experts caution against the unsafe practice of siphoning petroleum by mouth, warning specially, that it can result in loss of life. Beckson's answer is the patented Siphon-Mate pump; a combination displacement lift pump and siphon pump with valves suitable for transferring fuel. Pump half strokes to start flow. Once flow begins, fully extending the handle will allow siphoning provided that the source is higher in elevation than the receptacle.

Supplied with clear tubing to allow versatile application. Cut tubing for desired length of intake and discharge hose. When finished siphoning or pumping flammable liquids, be sure to drain siphon pump of liquid before storing. This pump not intended for transfer of liquid over 120 degrees F (49 degrees C) nor solvents that will attack PVC.

Features
  • Use for diesel, oil, water
  • Length: 11-1/2" (28.4cm)
  • Diameter: 1-1/4" (32mm)
  • Lifts: 4 oz (.12 L) per stroke

    WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GROCO 4 Port Oil Change System w/Reversing Switch – 24V

$1,328.00

4 Port Oil Change System with Reversing Switch - 24V

Features:

  • Powerful Gear pump Delivers Nearly twice the Flow as Competitive Models
  • TouchPad Controlled
  • Bronze Manifold System
  • System Sizes from 3 Valves to 6 Valves
  • Resettable Overcurrent and Dry Run Protection
  • Cover Conceals Pump and Circuitry on G Series
  • Oil Pan Adaptors Available for all Common Marine engines

GROCO Commercial Duty Reversing Vane Pump – 12V

$1,526.00

Commercial Duty Reversing Vane Pump - 12V

GROCO  Vane Pumps are self-priming, are instantly reversible, and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet),  fuel transfer, ballast transfer, and oil change.  Ignition protected motor, #316 stainless steel shaft, and reversing (R). SPO-80 Series Vane Pumps have a more powerful motor and are better suited for long run-time or head pressure greater than 20 PSI. 

Specifications:

  • Self Priming: YES
  • Thread NPT: 1/2" + Garden Hose Adaptor
  • Control Type: Pump Mounted Reversing Switch
  • Max GPM: 7
  • Breaker DC: 30 Amp

GROCO Commercial Duty Reversing Vane Pump – 24V

$1,536.00

Commercial Duty Reversing Vane Pump - 24V

GROCO  Vane Pumps are self-priming, are instantly reversible, and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet),  fuel transfer, ballast transfer, and oil change.  Ignition protected motor, #316 stainless steel shaft, and reversing (R). SPO-80 Series Vane Pumps have a more powerful motor and are better suited for long run-time or head pressure greater than 20 PSI. 

Specifications:

  • Self Priming: YES
  • Thread NPT: 1/2" + Garden Hose Adaptor
  • Control Type: Pump Mounted Reversing Switch
  • Max GPM: 7
  • Breaker DC: 15 Amp

GROCO Commercial Duty Vane Pump – 12V

$1,234.00

Commercial Duty Vane Pump - 12V

GROCO  Vane Pumps are self-priming. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet),  fuel transfer, ballast transfer, and oil change.  Ignition protected motor and #316 stainless steel shaft. SPO-80 Series Vane Pumps have a more powerful motor and are better suited for long run-time or head pressure greater than 20 PSI. 

Specifications:

  • Self Priming: YES
  • Thread NPT: 1/2" + Garden Hose Adaptor
  • Control Type: None
  • Max GPM: 7
  • Breaker DC: 30 Amp

GROCO Commercial Duty Vane Pump – 24V

$1,244.00

Commercial Duty Vane Pump - 12V

GROCO  Vane Pumps are self-priming. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet),  fuel transfer, ballast transfer, and oil change.  Ignition protected motor and #316 stainless steel shaft. SPO-80 Series Vane Pumps have a more powerful motor and are better suited for long run-time or head pressure greater than 20 PSI. 

Specifications:

  • Self Priming: YES
  • Thread NPT: 1/2" + Garden Hose Adaptor
  • Control Type: None
  • Max GPM: 7
  • Breaker DC: 15 Amp

GROCO Gear Pump 3/4″ NPT Ports – 12V

$521.00

Gear Pump 3/4" NPT Ports - 12V

Positive Displacement Gear Pump

The Concept:

Made in the USA GROCO Gear Pumps are self-priming, instantly reversible, and are capable of operation in either direction.  Relatively low flow (less than vane pumps) makes them suitable for duties such as deck-wash, fuel transfer, ballast transfer, and oil change. All models have an ignition protected motor, #316 stainless steel shaft, and are available in models that provide reversing (R), remote reversing (RR), and reversing with touchpad (RT) control options.

Featuring:

  • Self Priming: Yes
  • Thread NPT: 3/8"
  • Control Type: None
  • Max GPM: 3
  • Breaker DC: 25 Amp

GROCO Heavy Duty Positive Displacement Reversing Vane Pump – 12V

$804.00

Heavy Duty Positive Displacement Reversing Vane Pump - 12V

GROCO Vane Pumps are self-priming, are instantly reversible, and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet),  fuel transfer, ballast transfer, and oil change.  All models have an ignition protected motor and #316 stainless steel shaft.

Specifications:

  • Self Priming: YES
  • Thread NPT: 1/2" + Garden Hose Adaptor
  • Control Type: Pump Mounted Reversing Switch
  • Max GPM: 6.5
  • Breaker DC: 30 Amp

GROCO Heavy Duty Positive Displacement Reversing Vane Pump – 24V

$814.00

Heavy Duty Positive Displacement Reversing Vane Pump - 24V 

GROCO Vane Pumps are self-priming, are instantly reversible, and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet),  fuel transfer, ballast transfer, and oil change.  All models have an ignition protected motor and #316 stainless steel shaft.

Specifications:

  • Self Priming: YES
  • Thread NPT: 1/2" + Garden Hose Adaptor
  • Control Type: Pump Mounted Reversing Switch
  • Max GPM: 6.5
  • Breaker DC: 15 Amp

GROCO Heavy Duty Positive Displacement Vane Pump – 12V

$530.00

Heavy Duty Positive Displacement Vane Pump - 12V

GROCO Vane Pumps are self-priming and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet),  fuel transfer, ballast transfer, and oil change.  All models have an ignition protected motor and #316 stainless steel shaft.

Specifications:

  • Self Priming: YES
  • Thread NPT: 1/2" + Garden Hose Adaptor
  • Control Type: None
  • Max GPM: 6.5
  • Breaker DC: 30 Amp

GROCO Heavy Duty Positive Displacement Vane Pump – 24V

$540.00

Heavy Duty Positive Displacement Vane Pump - 24V 

GROCO Vane Pumps are self-priming and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet),  fuel transfer, ballast transfer, and oil change.  All models have an ignition protected motor and #316 stainless steel shaft.

Specifications:

  • Self Priming: YES
  • Thread NPT: 1/2" + Garden Hose Adaptor
  • Control Type: None
  • Max GPM: 6.5
  • Breaker DC: 15 Amp