Outriggers
C.E. Smith Gen2 Carbon Fiber Center Rigger Pole – 12' – White – Single
Gen2 Carbon Fiber Center Rigger Pole - 12' - White - Single
Gen2 Poles are designed to prevent galvanic reactions, a common problem with anything made from carbon fiber, which keeps your poles looking good and performing at its best. The base of the poles are made of solid fiberglass for greater strength and stability.
Taper-Lok joints are used to fix the pole in its extended position. The Taper-Lok joints wedge tightly together creating a single rigid one piece pole that runs much straighter than fiberglass or aluminum poles. When ready for storage, simply unscrew and remove the locking pin from each collar and the fully rigid sections slide inside each other collapsing the pole. Taper-Lok gives you all the benefits of a single rigid pole with the added convenience of easy storage.
Gen2 Carbon Fiber Poles have an extra-long non-conductive tip designed to prevent line tangles in rough waters. These poles have integrated dual 316 stainless steel halyard eyes that are designed for running multiple halyards on one pole. The smooth design of these eyes also prevents any possibility of snags.
Features:
- Integrated dual halyard 316 stainless steel eyes for running multiple halyards
- Extra-long nonconductive tip to prevent tangles
- Solid fiberglass base for greater strength and stability
- Designed to prevent galvanic reactions
- Taper-Lok joints create single rigid one piece poles
- Straighter and stronger than fiberglass and aluminum poles
- Sections slide inside one another for collapsible storage
C.E. Smith Gen2 Carbon Fiber Outriggers – 16.5' – White – Pair
Gen2 Carbon Fiber Outriggers - 16.5' - White
Gen2 Poles are designed to prevent galvanic reactions, a common problem with anything made from carbon fiber, which keeps your poles looking good and performing at its best. The base of the poles are made of solid fiberglass for greater strength and stability.
Taper-Lok joints are used to fix the pole in its extended position. The Taper-Lok joints wedge tightly together creating a single rigid one piece pole that runs much straighter than fiberglass or aluminum poles. When ready for storage, simply unscrew and remove the locking pin from each collar and the fully rigid sections slide inside each other collapsing the pole. Taper-Lok gives you all the benefits of a single rigid pole with the added convenience of easy storage.
Gen2 Carbon Fiber Poles have an extra-long non-conductive tip designed to prevent line tangles in rough waters. These poles have integrated dual 316 stainless steel halyard eyes that are designed for running multiple halyards on one pole. The smooth design of these eyes also prevents any possibility of snags.
The base of this pole fits 1-1/2" pole holders, which is the typical size for stainless steel holders. There are two aluminum fitment sleeves included that fit on the base of the poles allowing them to fit 1-5/8" pole holders, which is the typical size for aluminum rod holders.
This set also includes a mesh bag for carrying and storing you poles.
Features:
- Integrated dual halyard 316 stainless steel eyes for running multiple halyards
- Extra-long nonconductive tip to prevent tangles
- Solid fiberglass base for greater strength and stability
- Designed to prevent galvanic reactions
- Taper-Lok joints create single rigid one piece poles
- Straighter and stronger than fiberglass and aluminum poles
- Sections slide inside one another for collapsible storage
C.E. Smith Gen2 Carbon Fiber Outriggers – 22' – White – Pair
Gen2 Carbon Fiber Outriggers - 22' - White - 4 Sections/Pair
Gen2 Poles are designed to prevent galvanic reactions, a common problem with anything made from carbon fiber, which keeps your poles looking good and performing at its best. The base of the poles are made of solid fiberglass for greater strength and stability.
Taper-Lok joints are used to fix the pole in its extended position. The Taper-Lok joints wedge tightly together creating a single rigid one piece pole that runs much straighter than fiberglass or aluminum poles. When ready for storage, simply unscrew and remove the locking pin from each collar and the fully rigid sections slide inside each other collapsing the pole. Taper-Lok gives you all the benefits of a single rigid pole with the added convenience of easy storage.
Gen2 Carbon Fiber Poles have an extra-long non-conductive tip designed to prevent line tangles in rough waters. These poles have integrated dual 316 stainless steel halyard eyes that are designed for running multiple halyards on one pole. The smooth design of these eyes also prevents any possibility of snags.
Features:
- Integrated dual halyard 316 stainless steel eyes for running multiple halyards
- Extra-long nonconductive tip to prevent tangles
- Solid fiberglass base for greater strength and stability
- Designed to prevent galvanic reactions
- Taper-Lok joints create single rigid one piece poles
- Straighter and stronger than fiberglass and aluminum poles
- Sections slide inside one another for collapsible storage
C.E. Smith Gen3 Carbon Fiber Outriggers – Black – 16.5′ – Pair
Gen3 Carbon Fiber Outriggers - Black - 16.5" - Pair
Includes:
- Two Carbon Fiber Outrigger Poles with integrated dual stainless eyes
- Eight locking screws
- Two aluminum base sleeves
- Mesh storage bag
Features:
- Integrated dual halyard 316 stainless steel eyes for running multiple halyards
- Extra-long non-conductive tip to prevent tangles
- Solid fiberglass base for greater strength and stability
- Designed to prevent galvanic reactions
- Taper-Lok joints create single rigid one piece poles
- Straighter and stronger than fiberglass and aluminum poles
- Sections slide inside one another for collapsible storage
Our Gen3 Poles are designed to prevent galvanic reactions, a common problem with anything made from carbon fiber, which keeps your poles looking good and performing at its best. The base of the poles are made of solid fiberglass for greater strength and stability.
Taper-Lok joints are used to fix the pole in its extended position. The Taper-Lok joints wedge tightly together creating a single rigid one piece pole that runs much straighter than fiberglass or aluminum poles. When ready for storage, simply unscrew and remove the locking pin from each collar and the fully rigid sections slide inside each other collapsing the pole. Taper-Lok gives you all the benefits of a single rigid pole with the added convenience of easy storage.
Our Gen3 Carbon Fiber Poles have an extra-long non-conductive tip designed to prevent line tangles in rough waters. These poles have integrated dual 316 stainless steel halyard eyes that are designed for running multiple halyards on one pole. The smooth design of these eyes also prevents any possibility of snags.
The base of this pole fits 1-1/2" pole holders, which is the typical size for stainless steel holders. There are two aluminum fitment sleeves included that fit on the base of the poles allowing them to fit 1-5/8" pole holders, which is the typical size for aluminum rod holders.
This set also includes a mesh bag for carrying and storing you poles.
C.E. Smith Gen3 Carbon Fiber Outriggers – Black – 22′ – Pair
Gen3 Carbon Fiber Outriggers - Black - 22' - Pair
Includes:
- Two Carbon Fiber Outrigger Poles with integrated dual stainless eyes
- Eight locking screws
- Two aluminum base sleeves
- Mesh storage bag
Features:
- Integrated dual halyard 316 stainless steel eyes for running multiple halyards
- Extra-long non-conductive tip to prevent tangles
- Solid fiberglass base for greater strength and stability
- Designed to prevent galvanic reactions
- Taper-Lok joints create single rigid one piece poles
- Straighter and stronger than fiberglass and aluminum poles
- Sections slide inside one another for collapsible storage
Our Gen3 Poles are designed to prevent galvanic reactions, a common problem with anything made from carbon fiber, which keeps your poles looking good and performing at its best. The base of the poles are made of solid fiberglass for greater strength and stability.
Taper-Lok joints are used to fix the pole in its extended position. The Taper-Lok joints wedge tightly together creating a single rigid one piece pole that runs much straighter than fiberglass or aluminum poles. When ready for storage, simply unscrew and remove the locking pin from each collar and the fully rigid sections slide inside each other collapsing the pole. Taper-Lok gives you all the benefits of a single rigid pole with the added convenience of easy storage.
Our Gen3 Carbon Fiber Poles have an extra-long non-conductive tip designed to prevent line tangles in rough waters. These poles have integrated dual 316 stainless steel halyard eyes that are designed for running multiple halyards on one pole. The smooth design of these eyes also prevents any possibility of snags.
The base of this pole fits 1-1/2" pole holders, which is the typical size for stainless steel holders. There are two aluminum fitment sleeves included that fit on the base of the poles allowing them to fit 1-5/8" pole holders, which is the typical size for aluminum rod holders.
This set also includes a mesh bag for carrying and storing you poles.
C.E. Smith Gen3 Center Rigger Pole – Black – 2-Section – 12'
Gen3 Center Rigger Pole - Black - 2-Section - 12'
12' Gen3 Carbon Fiber Center Rigger Pole is designed to prevent galvanic reactions, a common problem with anything made from carbon fiber, which keeps your poles looking good and performing at its best.
The base of the poles are made of solid fiberglass for greater strength and stability. Taper-Lok joints are used to fix the pole in its extended position. The Taper-Lok joints wedge tightly together creating a single rigid one piece pole that runs much straighter than fiberglass or aluminum poles. When ready for storage, simply unscrew and remove the locking pin from each collar and the fully rigid sections slide inside each other collapsing the pole. Taper-Lok gives you all the benefits of a single rigid pole with the added convenience of easy storage.
Features:
- One 12’ Carbon Fiber Center Rigger Poles with integrated dual stainless eyes
- Mesh storage bag
- Integrated dual halyard 316 stainless steel eyes for running multiple halyards
- Extra-long nonconductive tip to prevent tangles
- Solid fiberglass base for greater strength and stability
- Designed to prevent galvanic reactions
- Taper-Lok joints create single rigid one piece poles
- Straighter and stronger than fiberglass and aluminum poles
- Sections slide inside one another for collapsible storage
- Fits 1-1/2” pole holders without aluminum fitment sleeve
- Fits 1-5/8” pole holders with aluminum fitment sleeve
- Extended pole length 12’
Lee’s 13′ Bright Silver Center Rigger Pole w/Black Spike 1-3/8″
The Center Rigger has proven to be an effective tool when trolling. It should be the highest outrigger when the others are deployed in the fishing position. Its line runs straight down the middle with its bait being the farthest back. The Center Rigger bait, more often than not, is the one struck after the other baits have streamed by.
Features:
- 13'
- Bright Silver/Black Spike
- MX Step-tube style
- No spreader
Lee’s 16.5′ Bright Silver Black Spike Telescopic Poles f/Sidewinder
Our new model TX3916 is the perfect companion for our Sidewinder top mount outrigger holder. With an overall length of 16 1/2 plus feet when expanded, it collapses to just 6 feet when compressed. The Tx Series, built from the usual high grade marine materials consistently used at Lee's Tackle, will give superb performance for many years of serious fishing.
Color: Silver/Black - Pair
Lee’s 16′ Bright Silver Pole w/ Black Spike Step Tube 1 3/8″
Lee’s 16′ Center Rigging Pole – Bright Silver/Black Spike (MKII)
The Center Rigger has proven to be an effective tool when trolling. It should be the highest outrigger when the others are deployed in the fishing position. Its line runs straight down the middle with its bait being the farthest back. The Center Rigger bait, more often than not, is the one struck after the other baits have streamed by.
