Marine Hardware
Attwood 6″ Fold-Down Dock Cleat
Low-profile cleats simply fold-down when not in use and flip back up when it comes time to tie off.
Features:
- Ideal for small boats and watercraft
- Low-profile, fold-down design keeps cleat clear of dock traffic
- Marine-grade aluminum protected with corrosion resistant finish
- Easy to install on all dock types
- Requires two standard 3/8" carriage bolts (not included)
Attwood 8″ Fold-Down Dock Cleat
Low-profile cleats simply fold-down when not in use and flip back up when it comes time to tie off.
Features:
- Ideal for small boats and watercraft
- Low-profile, fold-down design keeps cleat clear of dock traffic
- Marine-grade aluminum protected with corrosion resistant finish
- Easy to install on all dock types
- Requires two standard 3/8" carriage bolts (not included)
Attwood Cowl Ventilator
Cowl Ventilator
Attwood hull-mounted vents are designed to install by fastening as a complete unit from either inside or outside the hull. Ventilation hose (not included) twists into the bottom of the box to form a raised water barrier. Plastic vents are corrosion-resistant, will not discolor. All collector boxes and vents are designed for intake or exhaust and meet ABYC H-2 cross sectional area requirements.
For use with 3" I.D. wire-supported ventilation hose. Features flexible hose flange that is screwed onto hose, then vent snaps onto the flange. Vent constructed of chrome-plated die-cast Perma-Plate® ZAMAK. Flange is non-corrosive plastic. Installs with #8 screws.
Installation Hole Size: 3-1/4" to 3-1/2"
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Attwood Fender Cleat – 3-1/2″
Fender Cleat - 3-1/2"
The perfect compliment to the Attwood Neat Cleat, the Fender Cleat allows you to easily secure fenders to your boat with a simple lift. This retractable cleat is made of durable, enhanced cast 316 stainless steel it's simple design assures long-life and dependable operation.
- Total Length: 3-1/2"
- Total Width: 1-3/16"
- Above deck-lowered/closed): 9/16"
- Above deck- raised/open: 1-3/8"
- Maximum Line Opening (adjusting heights): 3/4"
- Install Depth: 1-7/8"
- Mounting Hole Distance: 1-11/16"
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Attwood Flush Hatch Pull
Attwood Neat Cleat Stainless Steel – 6″
Neat Cleat Stainless Steel - 6"
A retractable stainless steel cleat with a thin profile that installs easily. Spring loaded stay up design. Each stanchion is a 7/8 in. stainless steel rod. Drainage receptacles (included) capture moisture and send it to the bilge via pitot tubing (not included). Installation is simple even on narrow gunwales - just drill twice with an appropriate size hole saw.
Features:
- Depth: 3-1/8 in.
- Height: 1-5/8 in. (lowered)
- Backed by a lifetime warranty against corrosion
- Size: 6 in. L x 1-1/2 in. W
Attwood Utility Snap Hook – 4″
Utility Snap Hook - 4"
This Attwood Utility Snap Hook is a versatile and dependable resource for connecting items or establishing a tie-down point. This sturdy zinc-plated steel hook has a spring-loaded closure that makes it easy to attach this hook to an item and remove the hook just as quickly and easily. This light-duty hook is 4 inches long, has a ¼-inch ring diameter, and is rated for a 500-pound safe load.
Features:
- Versatile and dependable resource for connecting items or establishing a tie-down point
- Sturdy zinc-plated steel hook
- Spring-loaded closure attaches hook to an item quickly and easily
- Light-duty hook
- Rated for a 500-pound safe load
- 4 inches long
Attwood ZAMAK Chrome Plated Zinc Cleats – Pair – 4-1/2″
ZAMAK Chrome Plated Zinc Cleats - Pair - 4-1/2"
For decades, Attwood has set marine industry standards for great looking, durable, freshwater hardware. Our Perma-Plate® process provides the best chrome-plating in the industry with eight individual layers of plating. Each layer adds to the product’s durability and corrosion-resistance. This Perma-Plate® process produces the finest, most corrosion-resistant ZAMAK hardware available exclusively from Attwood.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Beckson 6″ Clear Center Screw-Out Deck Plate – Black
The Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the center. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur.
- Center: Clear
- Color: Black