Showing 1–12 of 157 results

Forespar Lanocote Rust & Corrosion Solution Prop and Bottom – 16 oz.

$50.95

Lanocote Rust & Corrosion Solution Prop and Bottom - 16 oz. 

Natural Non-Toxic Anti-Foul Coating

LanoCote® Prop & Bottom™ is an economical and very effective marine foul release coating. Produced by boaters for boaters, it is a well-tested marine foul release based on lanolin and other biodegradable additives. When applied according to directions to metal props and running gear, it can provide up to six months, or more in some cases, protection from the growth of algae, sea grass, and a wide variety of worms, corals and barnacles.

Features:

  • Formulated for underwater application
  • Naturally sheds most marine growth
  • Performs best in waters of 64°F (18°C) and warmer
  • Flow efficient
  • Long lasting

Megaware KeelGuard® – 10' – Almond

$249.95

KeelGuard® - 10' - Almond

The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps

Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.

Megaware KeelGuard® Engineering

Every aspect of the patented Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.

Megaware KeelGuard® Colors & Sizes

Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.

Lifetime Warranty

Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.

Features:

  • Color: Almond
  • KeelGuard® Size: 10'
  • Boat Size up to 26'
  • 3M® Technology
  • 3M® Acrylic Pressure-Sensitive Adhesive
  • Pliable & Tough
  • Research & Technology
  • Contoured Edge
  • Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds
  • Eliminate Costly Repairs
  • Enjoy the Highest Quality and Superior Engineering
  • Increase the Value of Your Boat
  • 5” Width: Contact for Custom Sizes
  • Made in the USA

Megaware KeelGuard® – 10' – Black

$249.95

KeelGuard® - 10' - Black

The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps

Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.

Megaware KeelGuard® Engineering

Every aspect of the patented Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.

Megaware KeelGuard® Colors & Sizes

Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.

Lifetime Warranty

Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.

Features:

  • Color: Black
  • KeelGuard® Size: 10'
  • Boat Size up to 26'
  • 3M® Technology
  • 3M® Acrylic Pressure-Sensitive Adhesive
  • Pliable & Tough
  • Research & Technology
  • Contoured Edge
  • Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds
  • Eliminate Costly Repairs
  • Enjoy the Highest Quality and Superior Engineering
  • Increase the Value of Your Boat
  • 5” Width: Contact for Custom Sizes
  • Made in the USA

Megaware KeelGuard® – 10' – Blue

$249.95

KeelGuard® - 10' - Blue

The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps

Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.

Megaware KeelGuard® Engineering

Every aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.

Megaware KeelGuard® Colors & Sizes

Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.

Lifetime Warranty

Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.

Features:

  • Color: Blue
  • KeelGuard® Size: 10'
  • Boat Size up to 26'
  • 3M® Technology
  • 3M® Acrylic Pressure-Sensitive Adhesive
  • Pliable & Tough
  • Research & Technology
  • Contoured Edge
  • Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds
  • Eliminate Costly Repairs
  • Enjoy the Highest Quality and Superior Engineering
  • Increase the Value of Your Boat
  • 5” Width: Contact for Custom Sizes
  • Made in the USA

Megaware KeelGuard® – 10' – Charcoal

$249.95

KeelGuard® - 10' - Charcoal

The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps

Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.

Megaware KeelGuard® Engineering

Every aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.

Megaware KeelGuard® Colors & Sizes

Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.

Lifetime Warranty

Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.

Features:

  • Color: Charcoal
  • KeelGuard® Size: 10'
  • Boat Size up to 26'
  • 3M® Technology
  • 3M® Acrylic Pressure-Sensitive Adhesive
  • Pliable & Tough
  • Research & Technology
  • Contoured Edge
  • Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds
  • Eliminate Costly Repairs
  • Enjoy the Highest Quality and Superior Engineering
  • Increase the Value of Your Boat
  • 5” Width: Contact for Custom Sizes
  • Made in the USA

Megaware KeelGuard® – 10' – Gray

$249.95

KeelGuard® - 10' - Gray

The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps

Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.

Megaware KeelGuard® Engineering

Every aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.

Megaware KeelGuard® Colors & Sizes

Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.

Lifetime Warranty

Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.

Features:

  • Color: Gray
  • KeelGuard® Size: 10'
  • Boat Size up to 26'
  • 3M® Technology
  • 3M® Acrylic Pressure-Sensitive Adhesive
  • Pliable & Tough
  • Research & Technology
  • Contoured Edge
  • Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds
  • Eliminate Costly Repairs
  • Enjoy the Highest Quality and Superior Engineering
  • Increase the Value of Your Boat
  • 5” Width: Contact for Custom Sizes
  • Made in the USA

Megaware KeelGuard® – 10' – Hunter Green

$249.95

KeelGuard® - 10' - Hunter Green

The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps

Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.

Megaware KeelGuard® Engineering

Every aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.

Megaware KeelGuard® Colors & Sizes

Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.

Lifetime Warranty

Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.

Features:

  • Color: Hunter Green
  • KeelGuard® Size: 10'
  • Boat Size up to 26'
  • 3M® Technology
  • 3M® Acrylic Pressure-Sensitive Adhesive
  • Pliable & Tough
  • Research & Technology
  • Contoured Edge
  • Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds
  • Eliminate Costly Repairs
  • Enjoy the Highest Quality and Superior Engineering
  • Increase the Value of Your Boat
  • 5” Width: Contact for Custom Sizes
  • Made in the USA

Megaware KeelGuard® – 10' – Light Gray

$249.95

KeelGuard® - 10' - Light Gray

The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps

Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.

Megaware KeelGuard® Engineering

Every aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.

Megaware KeelGuard® Colors & Sizes

Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.

Lifetime Warranty

Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.

Features:

  • Color: Light Gray
  • KeelGuard® Size: 10'
  • Boat Size up to 26'
  • 3M® Technology
  • 3M® Acrylic Pressure-Sensitive Adhesive
  • Pliable & Tough
  • Research & Technology
  • Contoured Edge
  • Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds
  • Eliminate Costly Repairs
  • Enjoy the Highest Quality and Superior Engineering
  • Increase the Value of Your Boat
  • 5” Width: Contact for Custom Sizes
  • Made in the USA

Megaware KeelGuard® – 10' – Red

$249.95

KeelGuard® - 10' - Red

The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps

Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.

Megaware KeelGuard® Engineering

Every aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.

Megaware KeelGuard® Colors & Sizes

Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.

Lifetime Warranty

Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.

Features:

  • Color: Red
  • KeelGuard® Size: 10'
  • Boat Size up to 26'
  • 3M® Technology
  • 3M® Acrylic Pressure-Sensitive Adhesive
  • Pliable & Tough
  • Research & Technology
  • Contoured Edge
  • Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds
  • Eliminate Costly Repairs
  • Enjoy the Highest Quality and Superior Engineering
  • Increase the Value of Your Boat
  • 5” Width: Contact for Custom Sizes
  • Made in the USA

Megaware KeelGuard® – 10' – Sand

$249.95

KeelGuard® - 10' - Sand

The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps

Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.

Megaware KeelGuard® Engineering

Every aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.

Megaware KeelGuard® Colors & Sizes

Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.

Lifetime Warranty

Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.

Features:

  • Color: Sand
  • KeelGuard® Size: 10'
  • Boat Size up to 26'
  • 3M® Technology
  • 3M® Acrylic Pressure-Sensitive Adhesive
  • Pliable & Tough
  • Research & Technology
  • Contoured Edge
  • Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds
  • Eliminate Costly Repairs
  • Enjoy the Highest Quality and Superior Engineering
  • Increase the Value of Your Boat
  • 5” Width: Contact for Custom Sizes
  • Made in the USA

Megaware KeelGuard® – 10' – White

$249.95

KeelGuard® - 10' - White

The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps

Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.

Megaware KeelGuard® Engineering

Every aspect of the patented Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.

Megaware KeelGuard® Colors & Sizes

Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.

Lifetime Warranty

Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.

Features:

  • Color: White
  • KeelGuard® Size: 10'
  • Boat Size up to 26'
  • 3M® Technology
  • 3M® Acrylic Pressure-Sensitive Adhesive
  • Pliable & Tough
  • Research & Technology
  • Contoured Edge
  • Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds
  • Eliminate Costly Repairs
  • Enjoy the Highest Quality and Superior Engineering
  • Increase the Value of Your Boat
  • 5” Width: Contact for Custom Sizes
  • Made in the USA

Megaware KeelGuard® – 10' – Yellow

$249.95

KeelGuard® - 10' - Yellow

The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps

Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.

Megaware KeelGuard® Engineering

Every aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.

Megaware KeelGuard® Colors & Sizes

Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.

Lifetime Warranty

Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.

Features:

  • Color: Yellow
  • KeelGuard® Size: 10'
  • Boat Size up to 26'
  • 3M® Technology
  • 3M® Acrylic Pressure-Sensitive Adhesive
  • Pliable & Tough
  • Research & Technology
  • Contoured Edge
  • Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds
  • Eliminate Costly Repairs
  • Enjoy the Highest Quality and Superior Engineering
  • Increase the Value of Your Boat
  • 5” Width: Contact for Custom Sizes
  • Made in the USA