Hitches & Accessories
C.E. Smith Brass Coupler Lock
Brass Coupler Lock
Makes your trailer virtually theft-proof, whether it's on or off the car. Brass coupler lock prevents theft and accidental uncoupling.
- Brass
- Solid cast and heat treated for toughness
- Corrosion resistant
- Fits standard trailer coupler lock levers
- 1/4" lock pin
- 3/4" wide opening
Comes with 2 keys
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
C.E. Smith Draw Bar Storage Bag – Black
Black
- Don't bang your shins!
- Store the draw bar and keep your vehicle clean
Remove the draw bar and hitch ball from your vehicle to prevent banging your shin. Store it conveniently in your tow vehicle. Bag is padded with a strong zipper closure. Will easily hold a 2" receiver drawbar and hitch ball with a 2" rise or a 4" drop. Made of strong 600 Denier polyester with PVC backing. Includes a carry handle and a pocket to hold hitch pin.
Size: 15"L x 6"H x 4"D
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
C.E. Smith S-Hook Keepers (Pair) – Black
Product Description
This handy rubber keeper provides an extra measure of safety for the safety chain by preventing the S-hook from bouncing out when you're driving on bumpy roads.
- Sold in pairs
- S-hook not included
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm, and CADMIUM which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.
C.E. Smith Safety Chain Set, Class IV
Product Description
Zinc-plated, proof-coil chain features strong, heat-treated S-hooks to keep your trailer from separating from the tow vehicle if the coupler becomes unhitched. Remember to attach the open end of the hook up through the hole, not down, to prevent it from bouncing out. 24"L. Sold in pairs. 7600lb Capacity, 8/0 chain.
C.E. Smith Trailer Coupler Lift Handle
Product Description
Use this trailer lift handle to make moving your trailer easier.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
C.E. Smith Zinc Coupler Safety Pin
Zinc Coupler Safety Pin
Spring locking action secures the coupler clip and prevents accidental uncoupling.
- Zinc plated steel
- 1/4" pin shank fits all couplers
- 1-3/4" usable length
- 1-1/2" clearance under spring arm
Coupler not included.
WARNING: This product can expose you to chemicals including LEAD,Chromium (hexavalent compounds) which are known to the State of California to cause cancer, birth defects or other reproductive harm, and NICKEL (METALLIC),COBALT METAL POWDER,BERYLLIUM which are known to the State of California to cause cancer, and ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.
Camco Curved Leveler & Wheel Chock
Curved Leveler & Wheel Chock
The Camco Curved Leveler is a simple way to level your vehicle by giving a tire up to 4-inches of extra lift. The honeycomb design makes the leveler lightweight but durable. The drive-on curved design allows you to only drive on to as much height as needed, then chock the leveler at the exact right height. The included chock has non-slip rubber grippers on the bottom. Patented.
Features:
- Easy drive-on leveler adds up to 4-inches in height
- Honeycomb design makes leveler lightweight, but durable
- Included chock has non-slip rubber grippers on the bottom
- The compact length makes the leveler compatible with tandem wheel spacing without modification
- Designed for use with trailers up to 30,000 lb.
- Patented
Camco Curved Leveler & Wheel Chock *2-Pack
Curved Leveler & Wheel Chock *2-Pack
The Camco Curved Leveler is a simple way to level your vehicle by giving a tire up to 4-inches of extra lift. The honeycomb design makes the leveler lightweight but durable. The drive-on curved design allows you to only drive on to as much height as needed, then chock the leveler at the exact right height. The included chock has non-slip rubber grippers on the bottom. Patented.
Features:
- Easy drive-on leveler adds up to 4-inches in height
- Honeycomb design makes leveler lightweight, but durable
- Included chock has non-slip rubber grippers on the bottom
- The compact length makes the leveler compatible with tandem wheel spacing without modification
- Designed for use with trailers up to 30,000 lb.
- Patented
Camco Eaz-Lift 10″ Wheel Stop w/Wrench & Lock – Metal
Eaz-Lift 10" Wheel Stop with Wrench & Lock - Metal
Prevent tandem-tire shift using just one piece of equipment-Eaz-Lift's Premium Metal Wheel Stop. Zinc-plated for corrosion resistance has raised ribs on the contact surface for increased traction which helps prevent tire shift/slippage between tandem tires spaced from 3-10 inches apart. It also includes a comfort-grip ratchet wrench for easy installation and a lock to keep it secure.
Features:
- Fits tire spacing from 3" - 10"
- Ratchet wrench included for easy installation
- Raised ribs for increased traction/less slippage
- Lock included for added security
- When compressed measures 14" Height x 4" Depth x 3" Width
Camco Eaz-Lift Trekker 1,200 Weight Distribution Hitch w/Progressive Sway Control
Eaz-Lift Trekker 1,200 Weight Distribution Hitch with Progressive Sway Control
Eaz-Lift’s Trekker is the perfect combination of premium weight distribution and sway control in an easy to install hitch. Trekker utilizes Adaptive Sway Technology which goes above and beyond that of the competitors’ weight distribution hitches. When towing and challenged with wind gusts and passing trucks, the Trekker reacts and increases resistance as needed! During sharp turns and maneuvering, when sway control is unnecessary, the Trekker disengages sway control completely for improved handling. When towing in dangerous conditions, such as slippery or icy roads, sway control is unwanted. Trekker’s easy on/off sway control makes it a breeze to manually disengage. This feature also comes in handy when hooking-up and unhooking.
Weight Distributing System with Adaptive Sway Technology
If your trailer weighs in at 50% or more of your vehicle’s weight, then you should consider a weight distribution system. The Eaz-Lift Trekker features adaptive sway control. With other sway control hitches, turning can be an even bigger hassle than it usually is with a trailer because the sway control 'locks' the trailer straight. With the Eaz-Lift Trekker, the hitch will control your sway for normal driving, but when you turn, the sway control will automatically disengage, making the maneuver smoother and easier on the driver.
How it Works
When a vehicle is towing a heavy load, the downward weight exerted by the trailer, called the tongue weight, tends to pull the back of the vehicle down, in turn causing the front of the vehicle to lift. This can be damaging to the vehicle, and dangerous to drive. The Eaz-Lift Trekker weight distribution hitch distributes the tongue weight more evenly across the tow vehicle axles, leveling the vehicle and making the trailer safer to tow.
The adaptive sway control is specifically designed for ease of driving. For most normal driving, the hitch keeps your trailer in line with your vehicle. With some sway control hitches, a sway-resistance set up that is too tight or rigid will attempt to keep the trailer and vehicle in line. In such a rigid set up, the trailer could pull the vehicle in line with the trailer instead of vice versa. Essentially, the tail wags the dog. Adaptive sway technology gives some slight resisted natural independent movement, with resistance building only as needed until it peaks at maximum resistance. The hitch is factory pre-calibrated for optimal sway control performance and does not rely on tongue weight to apply sway resistive forces. However, when you need to turn, the sway control automatically disengages to allow the trailer to turn, then re-engages when you resume normal driving. The adaptive sway system can be engaged or disengaged. Disengaging the sway control makes hooking up, unhooking and driving in adverse conditions easier.
Features:
- Weight distribution hitch
- Adaptive Sway control
- Rated for 1,200-1,400 lb tongue weight, 12,000-14,000 lb gross trailer weight
- Turns off for dangerous road conditions
- Reduced noise
What's In the Box?
- (1) Ball mount
- (1) Adjustable 2-inch square shank Hi-low
- (1) Hitch pin
- (1) Spring clip
- (2) Spring bars
- (2) Hook up straps
- (2) Hook up hangers
- (1) Bolt package- hook up
- (1) Bolt package- ball mount
- (1) Thumbscrew
- (2) Pins with latch
- (1) Wrench
Camco FasTen Leveling Blocks w/T-Handle – 2×2 – Brown *10-Pack
FasTen Leveling Blocks with T-Handle - 2x2 - Brown *10-Pack
The Camco FasTen Leveling Blocks allow you to stack the interlocking blocks to the desired height for safe and easy leveling. Each block adds a full inch to stack height. Camco’s FasTen Leveling Blocks can be used with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks, and tandem axles. The convenient carrying handles easily pull up for carrying or twist down to secure blocks together for storage. Product dimensions: 8.5” x 8.5” x 1”. Stack height should not exceed 4-1/2 inches.
Features:
- 10 interlocking blocks stack to the desired height for customizable leveling
- Carrying handle easily twists to secure blocks together for storage
- Strong and durable construction
- Safe and easy to use
- Compatible with Camco Leveling Blocks
Camco FasTen Leveling Blocks w/T-Handle – 2×2 – Yellow *10-Pack
FasTen Leveling Blocks with T-Handle - 2x2 - Yellow *10-Pack
The Camco FasTen Leveling Blocks allow you to stack the interlocking blocks to the desired height for safe and easy leveling. Each block adds a full inch to stack height. Camco’s FasTen Leveling Blocks can be used with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks, and tandem axles. The convenient carrying handles easily pull up for carrying or twist down to secure blocks together for storage. Product dimensions: 8.5” x 8.5” x 1”. Stack height should not exceed 4-1/2 inches.
Features:
- 10 interlocking blocks stack to the desired height for customizable leveling
- Carrying handle easily twists to secure blocks together for storage
- Strong and durable construction
- Safe and easy to use
- Compatible with Camco Leveling Blocks