Showing 1–12 of 16 results

Beckson 10×24″ Flush Hatch Horizontal or Vertical – White

$229.99
Flush Mount Hatch

Features:
  • 1/2 inch Closed Height
  • Weather-Tight Seal
  • Opens full 180 degrees
  • Nothing to Snag Lines
  • One Hand Operation
  • Mounts Vertical or Horizontal
  • UV Stabilized Material
  • Invisible Fasteners
  • Textured Non-Skid Surface
  • O.D. 9-1/2" x 23-7/8"
  • I.D. 6" x 20-1/2"
  • Hole Cut: 6-3/4" x 20-7/8"

Beckson 11″ x 15″ Flush Hatch White – ASA Material – Acrylonitrile Styrene Acrylate

$169.99

11" x 15" Flush Hatch White - ASA Material - Acrylonitrile Styrene Acrylate 

Features:

  • 1/2” Closed Height
  • Weather-tight Seal
  • Opens full 180 degrees
  • Nothing to Snag Lines
  • One-Hand Operation
  • Mounts Vertical or Horizontal
  • UV Stabilized Material
  • Invisible Fasteners
  • Color: White
  • Non-Skid Diamond Pattern Surface

Beckson 14″ x 24″ Flush Hatch White – ASA Material – Acrylonitrile Styrene Acrylate

$219.99

14" x 24" Flush Hatch White - ASA Material - Acrylonitrile Styrene Acrylate

Features:

  • 1/2” Closed Height
  • Weather-tight Seal
  • Opens full 180 degrees
  • Nothing to Snag Lines
  • One-Hand Operation
  • Mounts Vertical or Horizontal
  • UV Stabilized Material
  • Invisible Fasteners
  • Color: White
  • Non-Skid Diamond Pattern Surface

Beckson 18×21″ Flush Hatch Horizontal or Vertical – Beige

$221.99
Flush Mount Hatch

Features:
  • 1/2 inch Closed Height
  • Weather-Tight Seal
  • Opens full 180 degrees
  • Nothing to Snag Lines
  • One Hand Operation
  • Mounts Vertical or Horizontal
  • UV Stabilized Material
  • Invisible Fasteners
  • Textured Non-Skid Surface
  • O.D. 18-1/8" x 20-1/2"
  • I.D. 14-5/8" x 17"
  • Hole Cut: 15-3/8" x 17-3/8"

Beckson 18×21″ Flush Hatch Horizontal or Vertical – White

$221.99
Flush Mount Hatch

Features:
  • 1/2 inch Closed Height
  • Weather-Tight Seal
  • Opens full 180 degrees
  • Nothing to Snag Lines
  • One Hand Operation
  • Mounts Vertical or Horizontal
  • UV Stabilized Material
  • Invisible Fasteners
  • Textured Non-Skid Surface
  • O.D. 18-1/8" x 20-1/2"
  • I.D. 14-5/8" x 17"
  • Hole Cut: 15-3/8" x 17-3/8"

Beckson 5″ x 12″ x 1″ Self Drain™ Opening Port

$280.40
5" x 12" x 1" Self Drain™ Opening Port

The Beckson Self Drain™ Opening Port is innovatively designed with an angled drainage ramp molded on the inside of the spigot. This design promotes drainage without having the hassle of making angled cuts in the hull. This also allows for thru-bolting, which is impossible in windows where an angled spigot extends below the bolt holes. The internal angle seats tightly against the gasket and lens, thus omitting an exterior water retention ledge present in most other ports. (No water-fall when you open the port after a rain.) Self Drain™ Opening Ports are ideal for mounting where installation is within 15x of vertical (with spigot length up to one inch). Longer spigots are available for vertical installations. For greater angles use Beckson Rain Drain™ Ports.

Beckson 5″ x 12″ x 2″ Self Drain™ Opening Port

$280.40
5" x 12" x 2" Self Drain™ Opening Port

The Beckson Self Drain™ Opening Port is innovatively designed with an angled drainage ramp molded on the inside of the spigot. This design promotes drainage without having the hassle of making angled cuts in the hull. This also allows for thru-bolting, which is impossible in windows where an angled spigot extends below the bolt holes. The internal angle seats tightly against the gasket and lens, thus omitting an exterior water retention ledge present in most other ports. (No water-fall when you open the port after a rain.) Self Drain™ Opening Ports are ideal for mounting where installation is within 15° of vertical (with spigot length up to one inch). Longer spigots are available for vertical installations. For greater angles use Beckson Rain Drain™ Ports.

Beckson Drain Port – 4″ x 14″ x 1″-Depth – White/Clear

$294.15

Drain Port - 4" x 14" x 1"-Depth - White/Clear

For ports mounted on a sloped surface.

Rain Drain ports are designed for use where cabin sides are sloped, and other ports would collect rain and spray.

The molded in Rain Drain™ channels drain while tipped as much as 40°. They resist clogging and are easy to clean.

No water enters the boat when you open the port after a rain.

Beckson plastic portlights have a long history of excellent service and superior design features.

They feature no corrosion, no condensation, no leaks, and no waterfall when you open the port.

Features:

  • Screen and exterior trim ring are included
  • Replacement parts are readily available
  • All Beckson Opening Ports are CE approved
  • For replacing existing portlights, Beckson Fixed and Opening Ports are engineered to standard mounting hole sizes for interchangeability with other manufacturer's ports

Beckson Drain Port – 4″ x 14″ x 2″-Depth – White/Clear

$294.15

Drain Port - 4" x 14" x 2"-Depth - White/Clear 

Rain Drain ports are designed for use where cabin sides are sloped, and other ports would collect rain and spray.

The molded in Rain Drain™ channels drain while tipped as much as 40°. They resist clogging and are easy to clean.

No water enters the boat when you open the port after a rain. 

Beckson plastic portlights have a long history of excellent service and superior design features.
They feature no corrosion, no condensation, no leaks, and no waterfall when you open the port.

Features:

  • Screen and exterior trim ring are included
  • Replacement parts are readily available
  • All Beckson Opening Ports are CE approved
  • For replacing existing portlights, Beckson Fixed and Opening Ports are engineered to standard mounting hole sizes for interchangeability with other manufacturer's ports

Lewmar Right Handed Portlight Handle kit

$15.95

Right Handed Portlight Handle kit

For right-sided handle operation.

Compatible with:

  • Older model Lewmar Portlights

*Sold as an Individual

Sea-Dog 90° Gas Lift Mount – Wide

$11.65

90° Gas Lift Mount - Wide 

90° Gas Lift Mounts are constructed of stamped 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.

Sea-Dog Flush Hatch Pull

$29.15

Flush Hatch Pull 

Constructed of corrosion resistant investment cast 316 stainless steel. These hatch pulls are ideal for use on doors, hatches, lazarettes, and dock boxes. Handle pivots out to open hatches and lays flush when not in use for a clean appearance. Installs with four #8 FH fasteners (not included).