Showing 1–12 of 54 results

Camco Eaz-Lift Trekker 1,200 Weight Distribution Hitch w/Progressive Sway Control

$629.99

Eaz-Lift Trekker 1,200 Weight Distribution Hitch with Progressive Sway Control

Eaz-Lift’s Trekker is the perfect combination of premium weight distribution and sway control in an easy to install hitch. Trekker utilizes Adaptive Sway Technology which goes above and beyond that of the competitors’ weight distribution hitches. When towing and challenged with wind gusts and passing trucks, the Trekker reacts and increases resistance as needed! During sharp turns and maneuvering, when sway control is unnecessary, the Trekker disengages sway control completely for improved handling. When towing in dangerous conditions, such as slippery or icy roads, sway control is unwanted. Trekker’s easy on/off sway control makes it a breeze to manually disengage. This feature also comes in handy when hooking-up and unhooking.

Weight Distributing System with Adaptive Sway Technology

If your trailer weighs in at 50% or more of your vehicle’s weight, then you should consider a weight distribution system. The Eaz-Lift Trekker features adaptive sway control. With other sway control hitches, turning can be an even bigger hassle than it usually is with a trailer because the sway control 'locks' the trailer straight. With the Eaz-Lift Trekker, the hitch will control your sway for normal driving, but when you turn, the sway control will automatically disengage, making the maneuver smoother and easier on the driver.

How it Works

When a vehicle is towing a heavy load, the downward weight exerted by the trailer, called the tongue weight, tends to pull the back of the vehicle down, in turn causing the front of the vehicle to lift. This can be damaging to the vehicle, and dangerous to drive. The Eaz-Lift Trekker weight distribution hitch distributes the tongue weight more evenly across the tow vehicle axles, leveling the vehicle and making the trailer safer to tow.

The adaptive sway control is specifically designed for ease of driving. For most normal driving, the hitch keeps your trailer in line with your vehicle. With some sway control hitches, a sway-resistance set up that is too tight or rigid will attempt to keep the trailer and vehicle in line. In such a rigid set up, the trailer could pull the vehicle in line with the trailer instead of vice versa. Essentially, the tail wags the dog. Adaptive sway technology gives some slight resisted natural independent movement, with resistance building only as needed until it peaks at maximum resistance. The hitch is factory pre-calibrated for optimal sway control performance and does not rely on tongue weight to apply sway resistive forces. However, when you need to turn, the sway control automatically disengages to allow the trailer to turn, then re-engages when you resume normal driving. The adaptive sway system can be engaged or disengaged. Disengaging the sway control makes hooking up, unhooking and driving in adverse conditions easier.

Features:

  • Weight distribution hitch
  • Adaptive Sway control
  • Rated for 1,200-1,400 lb tongue weight, 12,000-14,000 lb gross trailer weight
  • Turns off for dangerous road conditions
  • Reduced noise

What's In the Box?

  • (1) Ball mount
  • (1) Adjustable 2-inch square shank Hi-low
  • (1) Hitch pin
  • (1) Spring clip
  • (2) Spring bars
  • (2) Hook up straps
  • (2) Hook up hangers
  • (1) Bolt package- hook up
  • (1) Bolt package- ball mount
  • (1) Thumbscrew
  • (2) Pins with latch
  • (1) Wrench

Dometic Slide Mount Kit f/CFX3 35/45 & CFF 35/45

$349.99

Slide Mount Kit for CFX3 35/45 & CFF 35/45

Wander without worry.  The Dometic CFX3 SLD35/45 is designed to allow easy access to your CFX3 powered cooler from the back of your truck, SUV, trailer, or RV. 

A strong construction, large maximum load capacity, and rugged latching system make the CFX3 fridge slides must-haves for the serious outdoor adventurer.

Legacy Part Number - CFX3SLD35/45

Features:

  • The maximum load capacity of 220 lbs or 100 kg
  • Can be fully extended for easy access to fridge contents
  • A rugged latching system reduces rattling noise while driving
  • Dust cover keeps sand and dirt out of slide rails
  • The optimized design avoids adding unnecessary weight to the vehicle

Compatibility:

  • CFX3 35/45 Powered Cooler
  • CFF 35/45 Powered cooler

In the Box:

  • One (1) Slide
  • Four (4) Straps
  • Install hardware
  • Manual

*Sold as an Individual 

WarningWARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Dometic Slide Mount Kit f/CFX3 55 IM

$349.99

Slide Mount Kit for CFX3 55 IM

Wander without worry.  The Dometic CFX3 SLD55 is designed to allow easy access to your CFX3 powered cooler from the back of your truck, SUV, trailer, or RV. 

A strong construction, large maximum load capacity, and rugged latching system make the CFX3 fridge slides must-haves for the serious outdoor adventurer.

Legacy Part Number - CFX3SLD55

Features:

  • The maximum load capacity of 220 lbs or 100 kg
  • Can be fully extended for easy access to fridge contents
  • A rugged latching system reduces rattling noise while driving
  • Dust cover keeps sand and dirt out of slide rails
  • The optimized design avoids adding unnecessary weight to the vehicle

In the Box:

  • One (1) Slide
  • Four (4) Straps
  • Install hardware
  • Manual

*Sold as an Individual 

WarningWARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Dometic Slide Mount Kit f/CFX3 75 DZ

$399.99

Slide Mount Kit for CFX3 75 DZ

Wander without worry.  The Dometic CFX3 SLD75 is designed to allow easy access to your CFX3 powered cooler from the back of your truck, SUV, trailer, or RV. 

A strong construction, large maximum load capacity, and rugged latching system make the CFX3 fridge slides must-haves for the serious outdoor adventurer.

Legacy Part Number - CFX3SLD75

Features:

  • The maximum load capacity of 220 lbs or 100 kg
  • Can be fully extended for easy access to fridge contents
  • A rugged latching system reduces rattling noise while driving
  • Dust cover keeps sand and dirt out of slide rails
  • The optimized design avoids adding unnecessary weight to the vehicle

In the Box:

  • One (1) Slide
  • Four (4) Straps
  • Install hardware
  • Manual

*Sold as an Individual

WarningWARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Dometic Slide Mount Kit f/CFX3 95 DZ & CFX3 100

$424.99

Slide Mount Kit for CFX3 95 DZ & CFX3 100

Wander without worry.  The Dometic CFX3 SLD95/100 is designed to allow easy access to your CFX3 powered cooler from the back of your truck, SUV, trailer, or RV. 

A strong construction, large maximum load capacity, and rugged latching system make the CFX3 fridge slides must-haves for the serious outdoor adventurer.

Legacy Part Number - CFX3SLD95/100

Features:

  • Maximum load capacity of 250 lbs or 115 kg
  • Can be fully extended for easy access to fridge contents
  • Rugged latching system reduces rattling noise while driving
  • Dust cover keeps sand and dirt out of slide rails
  • Optimized design avoids adding unnecessary weight to the vehicle

Compatibility:

  • CFX3 95 DZ Powered Cooler
  • CFX3 100 Powered cooler

In the Box:

  • One (1) Slide
  • Four (4) Straps
  • Install hardware
  • Manual

*Sold as an Individual 

WarningWARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Edson ComfortGrip™ 12″ *3-Pack

$31.32

ComfortGrip™ 12" *3-Pack

Edson’s iconic ComfortGrip™, now in 12” adhesive strips! Designed to fit on 1” to 1.25” diameter railings, these tactile grips will ergonomically cushion fingers while providing a secure hold. A high-performance Santoprene construction and a 3M Adhesive ensure these grips can withstand the harshest conditions!

The 12" ComfortGrip™ includes three grips to fit just about any application.  Adding a comfortable ergonomic grip with finger grooves to additional rail supports around your boat will not only save your hands but the hands of your guests as well. These grips are great to attach to: Boarding Handles, Hand Rails, Grab Rails, Swim Ladders, Bow Rails, Tiller Steering, T-Tops, Tools, and much more!

Specifications:

  • Comfortable ergonomic grips with finger grooves
  • Made from high-performance Santoprene
  • Designed to fit on to 1" to 1.25" diameter railings

Edson ComfortGrip™ 8″ *3-Pack

$27.00

ComfortGrip™ 8" *3-Pack

Edson’s iconic ComfortGrip™, now in 8” adhesive strips! Designed to fit on 1” to 1.25” diameter railings, these tactile grips will ergonomically cushion fingers while providing a secure hold. A high-performance Santoprene construction and a 3M Adhesive ensure these grips can withstand the harshest conditions!

The 8" ComfortGrip™ includes three grips to fit just about any application.  Adding a comfortable ergonomic grip with finger grooves to additional rail supports around your boat will not only save your hands but the hands of your guests as well. These grips are great to attach to: Boarding Handles, Hand Rails, Grab Rails, Swim Ladders, Bow Rails, Tiller Steering, T-Tops, Tools, and much more!

Specifications:

  • Comfortable ergonomic grips with finger grooves
  • Made from high-performance Santoprene
  • Designed to fit on to 1" to 1.25" diameter railings

Forespar Lanocote Rust & Corrosion Solution – 16 oz.

$36.45

Lanocote Rust & Corrosion Solution - 16 oz.

LanoCote works on these five basic principles: displaces water, absorbs corrosion, forms moisture barrier, penetrates and high lubricity. LanoCote is extremely effective in preventing and stopping corrosion on all types of metals under all environmental conditions. Formulated to withstand salt water marine conditions, LanoCote is particularly useful in preventing thread seizure due to all types of corrosion on boats and machinery.

Applied during assembly, LanoCote will greatly assist in easy dismantling years later. An example would be anchor shackles which are regularly immersed in salt water. LanoCote also combats galvanization where dissimilar metals are fastened together, such as stainless steel fittings on alloy masts etc. 

Features:

  • Prevents Thread Freeze-up
  • Combats Galvanic Reaction of Dissimilar Metals
  • Seals Porous Surfaces
  • Neutralizes Acids, Alkalies, & Salts
  • Prevents Corrosion on Electronic Contacts

Forespar Lanocote Rust & Corrosion Solution – 4 oz.

$16.95

Lanocote Rust & Corrosion Solution - 4 oz.

LanoCote works on these five basic principles: displaces water, absorbs corrosion, forms moisture barrier, penetrates and high lubricity. LanoCote is extremely effective in preventing and stopping corrosion on all types of metals under all environmental conditions. Formulated to withstand salt water marine conditions, LanoCote is particularly useful in preventing thread seizure due to all types of corrosion on boats and machinery.

Applied during assembly, LanoCote will greatly assist in easy dismantling years later. An example would be anchor shackles which are regularly immersed in salt water. LanoCote also combats galvanization where dissimilar metals are fastened together, such as stainless steel fittings on alloy masts etc. 

Features:

  • Prevents Thread Freeze-up
  • Combats Galvanic Reaction of Dissimilar Metals
  • Seals Porous Surfaces
  • Neutralizes Acids, Alkalies, & Salts
  • Prevents Corrosion on Electronic Contacts

Forespar Lanocote Rust & Corrosion Solution – 7 oz.

$24.45

Lanocote Rust & Corrosion Solution - 7 oz. 

LanoCote works on these five basic principles: displaces water, absorbs corrosion, forms moisture barrier, penetrates and high lubricity. LanoCote is extremely effective in preventing and stopping corrosion on all types of metals under all environmental conditions. Formulated to withstand salt water marine conditions, LanoCote is particularly useful in preventing thread seizure due to all types of corrosion on boats and machinery.

Applied during assembly, LanoCote will greatly assist in easy dismantling years later. An example would be anchor shackles which are regularly immersed in salt water. LanoCote also combats galvanization where dissimilar metals are fastened together, such as stainless steel fittings on alloy masts etc. 

Features:

  • Prevents Thread Freeze-up
  • Combats Galvanic Reaction of Dissimilar Metals
  • Seals Porous Surfaces
  • Neutralizes Acids, Alkalies, & Salts
  • Prevents Corrosion on Electronic Contacts

This product is flammable. 

Forespar Lanocote Rust & Corrosion Solution – 8 oz.

$20.45

Lanocote Rust & Corrosion Solution - 8 oz. 

LanoCote works on these five basic principles: displaces water, absorbs corrosion, forms moisture barrier, penetrates and high lubricity. LanoCote is extremely effective in preventing and stopping corrosion on all types of metals under all environmental conditions. Formulated to withstand salt water marine conditions, LanoCote is particularly useful in preventing thread seizure due to all types of corrosion on boats and machinery.

Applied during assembly, LanoCote will greatly assist in easy dismantling years later. An example would be anchor shackles which are regularly immersed in salt water. LanoCote also combats galvanization where dissimilar metals are fastened together, such as stainless steel fittings on alloy masts etc. 

Features:

  • Prevents Thread Freeze-up
  • Combats Galvanic Reaction of Dissimilar Metals
  • Seals Porous Surfaces
  • Neutralizes Acids, Alkalies, & Salts
  • Prevents Corrosion on Electronic Contacts

This product is flammable. 

Forespar Marelube TEF45 30cc Syringe

$20.95

Marelube TEF45 30cc Syringe

A highly water-resistant synthetic lubricant grease containing 45% PTFE, the highest PTFE available. Perfect for heavy loads and bi-metal anti-corrosion applications. Also works well at protecting against rust corrosion and anti-seize applications.