Bow Thrusters
Lewmar 140TT 2.0kW Bow Thruster Kit -12V
140TT 2.0kW Bow Thruster Kit -12V
Maneuvering around the dock area can be difficult, but Lewmar’s TT Thrusters make docking simple.
The revolutionary design of the TT propeller, the latest in Lewmar’s long history of custom thruster solutions, achieves a perfectly even thrust in both directions for maximum control and maneuverability.
All Lewmar Thrusters have been extensively tested, resulting in a smooth, efficient, and quiet performance that will have you docking like a pro in no time.
Features:
- No reservoir to install, no leaks, and no maintenance
- High performance 5 blade propellers give equal thrust in both directions
- High integrity seal
- Spline driven propeller, no drive pin or anode required
- Blue box electronics prevent misuse and protect the motor
- Hardened and ground spiral bevel gear for maximum efficiency and quiet power transmission
- Self-resetting thermal protection
- Easy plug together switch connections
- Minimum silhouette hub for smooth water flow
Technical Specifications:
- Voltage - 12V
- Power - 2.0 KW
- Power - 2.7 HP
- Tunnel Size - 5.5"
- Thrust - 81lb
- Weight - 29lb
*Sold as an Individual
Lewmar 140TT 2.2kw Gen. 2 Bow Thruster -12V
140TT 2.2kw Gen. 2 Bow Thruster - 12V
Maneuvering around the dock area can be difficult, but Lewmar’s TT Thrusters make docking simple.
The revolutionary design of the TT propeller, the latest in Lewmar’s long history of custom thruster solutions, achieves a perfectly even thrust in both directions for maximum control and maneuverability.
All Lewmar Thrusters have been extensively tested, resulting in a smooth, efficient, and quiet performance that will have you docking like a pro in no time.
Features:
- No reservoir to install, no leaks, and no maintenance
- High performance 5 blade propellers give equal thrust in both directions
- High integrity seal
- Spline driven propeller, no drive pin or anode required
- Blue box electronics prevent misuse and protect motor
- Hardened and ground spiral bevel gear for maximum efficiency and quiet power transmission
- Self-resetting thermal protection
- Easy plug together switch connections
- Minimum silhouette hub for smooth water flow
Technical Specifications:
- Voltage - 12V
- Power - 2.2 KW
- Power - 3 HP
- Tunnel Size - 5.5"
- Thrust - 92lb
- Weight - 29lb
*Sold as an Individual
Lewmar 200 AMP ANL Fuse
Lewmar Anode Kit for 140 TT
Lewmar Generation 2 Single Joystick Thruster Controller
Generation 2 Single Joystick Thruster Controller
Lewmar’s range of thruster controls provides superior tactile control of single or dual thruster installations.
The controllers are installed without the need for rear access and feature a snap-on bezel to neatly hide the mounting screws. A cover is also included, providing additional security against accidental use and giving extra environmental protection.
If replacing a previous generation touch panel, joystick panel, or dual joystick panel, the existing mounting hole and fixing screw positions can be reused.
Compatible with:
- Lewmar TT, RT, SRT & VRT thrusters are fitted with a blue box and can be fitted to thrusters fitted with a black box using a controller adapter.
*Requires Lewmar connecting cable.
Features:
- The ergonomic control ‘pad’ gives tactile feedback
- Membrane switch panel sealed from dust and moisture ingress
- Multi-function LED indicator displays system deployment, thruster operation, low voltage, motor temperature warnings & fault conditions.
- Fit existing cut-out of Lewmar joysticks
- Removable cover
Technical Specifications:
- Power - 12/24 Volt DC
- Cut-out - 2.5" Diameter
*Sold as an Individual
Lewmar Legacy Thruster Converter (Molex)
Legacy Thruster Converter (Molex)
Lewmar’s new range of thruster controllers provides superior tactile control of single or dual thruster installations.
Converts Gen 2 Thruster Controllers to Gen 1 Thruster Wiring. The controllers can be fitted to all Lewmar TT thrusters (Blue box) and to the previous generation TT thrusters fitted with a Black box, using this controller converter.
Only one legacy converter is required per thruster.
Features:
- Upgrade kit allows replacement of the previous generation controller with the new Black box thrusters
- Easy-fitting - Existing boat wiring can be used
- Needs to be installed next to the controller
*Sold as an Individual
Lewmar Thruster Joystick Panel Controller
Quick 6M Cable for TCD Controller
Quick Bow Thruster BTQ 110-25 25KGF – 12V – D110 – 1.3kW
Bow Thruster BTQ 110-25 25KGF - 12V - D110 - 1.3kW
Better Performances, Lower Absorption
The 4-blade Propellers guarantee maximum thrust performance and reduction in current absorption. They are made of composite materials, resistant in every condition. The counter-rotating system offers better thrust performances. The two props have been designed to suit left side and right side, to guarantee the same upper performances in both directions.
Features:
- The Gearbox is created so that the behavior of the propeller is unaffected in either direction.
- The bronze propeller gearleg is provided with a hydrodynamic profile that minimizes turbulence.
- Maintenance is not required since the special highly resistant components guarantee a perfect lubrication seal for life.
- The anodic aluminum protection is easily replaceable. In case of total corrosion of the anode, the prop doesn’t get lost because it’s fixed directly to the pod, independently from the anode.
- The elastic joint that optimizes the alignment between motor and gearbox is an exclusive Quick design. This acts as an even tension device, preserving the operating system from impulses from the bow thruster, with above-average results.
The Motors
New-generation materials have been chosen to constantly guarantee required output and maximum performance, given the severe conditions required by the application.
Top Safety
In case of relays’ melting, the TMS remote circuit breaker system switch-off the power to the motor from any place where a TDC panels or a TSC emergency mushroom panels are installed. Motor temperature sensor BTQ motors don’t need the thermic sensor to be able to always provide the maximum power when needed. The overheating protection is controlled by the software inside the touch panel or the joystick panel.
Quick Bow Thruster BTQ 125-30 30KGF – 12V – D125 – 1.5kW
Bow Thruster BTQ 125-30 30KGF - 12V - D125 - 1.5kW
Better Performances, Lower Absorption
The 4-blade Propellers guarantee maximum thrust performance and reduction in current absorption. They are made of composite materials, resistant in every condition. The counter-rotating system offers better thrust performances. The two props have been designed to suit left side and right side, to guarantee the same upper performances in both directions.
Features:
- The Gearbox is created so that the behavior of the propeller is unaffected in either direction.
- The bronze propeller gearleg is provided with a hydrodynamic profile that minimizes turbulence.
- Maintenance is not required since the special highly resistant components guarantee a perfect lubrication seal for life.
- The anodic aluminum protection is easily replaceable. In case of total corrosion of the anode, the prop doesn’t get lost because it’s fixed directly to the pod, independently from the anode.
- The elastic joint that optimizes the alignment between motor and gearbox is an exclusive Quick design. This acts as an even tension device, preserving the operating system from impulses from the bow thruster, with above-average results.
The Motors
New-generation materials have been chosen to constantly guarantee required output and maximum performance, given the severe conditions required by the application.
Top Safety
In case of relays’ melting, the TMS remote circuit breaker system switch-off the power to the motor from any place where a TDC panels or a TSC emergency mushroom panels are installed. Motor temperature sensor BTQ motors don’t need the thermic sensor to be able to always provide the maximum power when needed. The overheating protection is controlled by the software inside the touch panel or the joystick panel.
Quick Bow Thruster BTQ 125-40 40KGF – 12V – D125 – 2.2kW
Bow Thruster BTQ 125-40 40KGF - 12V - D125 - 2.2kW
Better Performances, Lower Absorption
The 4-blade Propellers guarantee maximum thrust performance and reduction in current absorption. They are made of composite materials, resistant in every condition. The counter-rotating system offers better thrust performances. The two props have been designed to suit left side and right side, to guarantee the same upper performances in both directions.
Features:
- The Gearbox is created so that the behavior of the propeller is unaffected in either direction.
- The bronze propeller gearleg is provided with a hydrodynamic profile that minimizes turbulence.
- Maintenance is not required since the special highly resistant components guarantee a perfect lubrication seal for life.
- The anodic aluminum protection is easily replaceable. In case of total corrosion of the anode, the prop doesn’t get lost because it’s fixed directly to the pod, independently from the anode.
- The elastic joint that optimizes the alignment between motor and gearbox is an exclusive Quick design. This acts as an even tension device, preserving the operating system from impulses from the bow thruster, with above-average results.
The Motors
New-generation materials have been chosen to constantly guarantee required output and maximum performance, given the severe conditions required by the application.
Top Safety
In case of relays’ melting, the TMS remote circuit breaker system switch-off the power to the motor from any place where a TDC panels or a TSC emergency mushroom panels are installed. Motor temperature sensor BTQ motors don’t need the thermic sensor to be able to always provide the maximum power when needed. The overheating protection is controlled by the software inside the touch panel or the joystick panel.
Quick Bow Thruster BTQ 140-30 30KGF – 12V – D140 – 1.5kW
Bow Thruster BTQ 140-30 30KGF - 12V - D140 - 1.5kW
Better Performances, Lower Absorption
The 4-blade Propellers guarantee maximum thrust performance and reduction in current absorption. They are made of composite materials, resistant in every condition. The counter-rotating system offers better thrust performances. The two props have been designed to suit left side and right side, to guarantee the same upper performances in both directions.
Features:
- The Gearbox is created so that the behavior of the propeller is unaffected in either direction.
- The bronze propeller gearleg is provided with a hydrodynamic profile that minimizes turbulence.
- Maintenance is not required since the special highly resistant components guarantee a perfect lubrication seal for life.
- The anodic aluminum protection is easily replaceable. In case of total corrosion of the anode, the prop doesn’t get lost because it’s fixed directly to the pod, independently from the anode.
- The elastic joint that optimizes the alignment between motor and gearbox is an exclusive Quick design. This acts as an even tension device, preserving the operating system from impulses from the bow thruster, with above-average results.
The Motors
New-generation materials have been chosen to constantly guarantee required output and maximum performance, given the severe conditions required by the application.
Top Safety
In case of relays’ melting, the TMS remote circuit breaker system switch-off the power to the motor from any place where a TDC panels or a TSC emergency mushroom panels are installed. Motor temperature sensor BTQ motors don’t need the thermic sensor to be able to always provide the maximum power when needed. The overheating protection is controlled by the software inside the touch panel or the joystick panel.
