SE 304 REPLACES JOHNSON / EVINRUDE EARLY MODEL V4 WITH 2.0:1
Original price was: $1,215.45.$1,095.00Current price is: $1,095.00.
This SE304 Gear Case replaces most early style Johnson/Evinrude V-4 Lower Units
from 1978-1998 with a 4-1/8 bullet diameter. The case has internal Water Screens
and a pointed cavitation plate at the rear.
The unit does not include the upper drive-shaft.
If your old unit has a one piece shaft you will need to purchase an upper drive-shaft.
See technical tab for drive-shaft part number.
Or, scroll down to see the optional drive-shafts. Call for assistance if needed.
We use the newer style stub-shaft with a clip.
If your upper shaft is not the newer style you will need to replace it.Our unit does not include a Water Pump. Please see Water Pump Kit listed below.
Our unit does not include the shift shaft. You will need to reuse your old one and adjust it. You may paint the unit to match your Outboard. For application assistance, please have your engine
| Weight | 55 lbs |
|---|---|
| Dimensions | 24 × 10 × 31 in |
You may also like…
Driveshaft Removal Tool
SKEG GUARD FOR SE304 LOWER UNITS
Gear Lube Oil and Pump Kit
Gear Lube Pump
Johnson Evinrude OMC drive shaft 20A Early Looper & C/F
Johnson Evinrude OMC drive shaft 20B” Late 90 Degree Looper
Johnson Evinrude OMC drive shaft 25″ 90 Deg. 92-306-04-25A
Johnson Evinrude OMC drive shaft 25″ 90 Deg. 92-306-04-25B
SE304 / SE305 Installation Kit
SE304 / SE306 Anode Kit
