Customer Service
+1 888 812 6287





Couldn't load pickup availability
The Xantrex Freedom X 3000, MPN 817-3000, is the 3000-watt hardwire model in the Freedom X true sine wave inverter range for RVs, trucks, work vehicles and boats with 12-volt battery systems. Xantrex rates it at 3000 watts continuous at 40 °C (104 °F), with a surge of twice the continuous rating (6000 W) for under 5 seconds to help start motor loads. AC output is selectable at 120, 110 or 108 V AC, at 60 Hz or 50 Hz. The Freedom X is an inverter only. It does not charge batteries, so your system needs a separate charger or inverter/charger for recharging.
A built-in 30 A AC transfer relay senses incoming shore or generator power and transfers connected loads to that source, then back to the inverter when it is removed. AC input and output connect through quick-connect terminals in the wiring bay. Xantrex lists a DC operating range up to 18.0 V DC, 288 A DC nominal current at full load, 91% peak efficiency and at least 85% full-load efficiency. Ignition control lets a 12 V DC signal switch the inverter on and off. The housing measures 15.4 × 10.8 × 4.0 inches without flanges and weighs 16.5 pounds, and it operates from -20 to 60 °C, derated above 40 °C. Xantrex lists ETL certification to CSA 107.1 and UL 458, ABYC E-11 and A-31 compliance, and FCC Part 15 Class B.
At 3000 watts from a 12-volt bank, DC current approaches 300 A. Battery capacity, DC cable size and fusing must be planned from the Freedom X owner's guide. The store listing notes that battery cables and a fuse are not included. A remote panel is optional: Xantrex offers the Freedom X/XC remote panel with 25 ft cable (808-0817-01) and the Bluetooth remote panel (808-0817-02). For a plug-in GFCI outlet, add GFCI option 808-9817, or choose the GFCI built-in model 817-3000-11. Installations that need the UL 458 Marine Supplement listing require drip shield 808-1050.
This listing ships one Freedom X 3000 hardwire inverter. The shipping options and delivery estimate for your address appear at checkout. Our full terms are on the shipping policy page: https://marinerswarehouse.com/policies/shipping-policy
Before installation, confirm a 12-volt battery bank sized for very high current, plus a separate charging source. Mount the inverter in a ventilated location close to the batteries, select DC cables and fusing from the Freedom X owner's guide, and have a qualified installer connect the AC input and output terminals to your distribution system.
Review the 16 oz gel format, specifications and application directions.
Check fiberglass, gelcoat and finish suitability before use.
Ask about your surface and stain type before ordering.
Review shipping information and return conditions before purchase.
Installation & Compatibility Guides
The Freedom X 3000 is a 12 V, 3000 W true sine wave inverter with a 30 A transfer relay. Check these six points before you buy.
The 817-3000 is a 12-volt model. Xantrex offers a separate 24 V Freedom X 2000 (817-2000-21).
At full load the inverter draws about 288 A DC. Size the battery bank, cables and fuse from the owner's guide.
The Freedom X does not charge batteries. Use a separate charger, or compare a Freedom XC inverter/charger.
Keep transferred loads within the 30 A relay rating, and have a qualified installer wire AC input and output.
Add remote panel 808-0817-01 or Bluetooth panel 808-0817-02, and GFCI option 808-9817 if you need a plug-in outlet.
The UL 458 Marine Supplement listing requires drip shield 808-1050, sold separately.
The Freedom X 3000 is an inverter with a built-in 30 A transfer relay. It converts battery power to 3000 W of true sine wave AC and switches loads to shore or generator power when available, but it does not recharge the batteries. It suits systems that already have a dedicated charger, or installations where charging comes from solar or an alternator.
If you also need shore-power charging, compare the Xantrex Freedom XC Pro 3000, a 3000 W inverter/charger with a 150 A charger. Choose by whether you need inverting only or inverting plus charging, then by continuous output and transfer requirements.
Use these collections to compare inverters, inverter/chargers and other RV equipment. A collection link is for browsing and does not confirm compatibility.
Browse inverters by DC input, continuous output, waveform and transfer features.
If you also need battery charging from shore power, review combined units and chargers. This link does not establish a compatible pairing.
Return to the parent collection to find another product family for your RV, truck or boat project.
Need Help?
Need help comparing Xantrex Freedom X 3000 Truesine Inverter, SKU 69555, MPN 817-3000? Share your battery-bank voltage and capacity, how you charge the batteries, and the AC circuits and loads you plan to run through the transfer relay. These details help us understand your selection question before you order.
Trusted by 50,000+ boat owners across the USA
Our team has years of experience in marine parts.
We respond quickly to get you the help you need.
We make sure you get the right part the first time.
Access to 50,000+ marine parts & accessories.
Thanks for subscribing!
This email has been registered!