Customer Service
+1 888 812 6287



Couldn't load pickup availability
RIGID Industries E-Series PRO 30-inch Spot/Flood Combo Light Bar, MPN 130313, is a single auxiliary LED light bar. Mariners Warehouse SKU 97164 supplies one RIGID 130313 E-Series PRO light bar. Select this exact optic and mounting format from the measured installation requirements; the black finish identifies the housing, and the listing does not establish a UV-blacklight function.
The 130313 model uses a double row of LEDs with Spot/Flood Combo optics and a black housing. The listed construction includes an aluminum-alloy housing, polycarbonate lens, thermal management and a pressure-equalizing vent. Its published 311W rating differs from the 30-inch Spot/Driving model, so shared E-Series size does not establish the same load or beam.
Measure the full bar, L-bracket arrangement, support spacing, rear clearance and aiming movement before drilling. Current manufacturer body width is 31.5 inches, despite the nominal 30-inch name. Use the supplied relay harness and its exact instructions; the store identifies open leads for the 20–50-inch family, so verify the actual termination instead of expecting a shorter-bar Deutsch plug. Follow the listing’s off-road-only restriction and the exact operating and environmental requirements.
Review one RIGID 130313 E-Series PRO light bar and the confirmed configuration before ordering. Check the shipping options and delivery estimate shown for your destination at checkout.
Confirm 130313 and the complete bar assembly. Measure the full bar, L-bracket arrangement, support spacing, rear clearance and aiming movement before drilling. Current manufacturer body width is 31.5 inches, despite the nominal 30-inch name. Use the supplied relay harness and its exact instructions; the store identifies open leads for the 20–50-inch family, so verify the actual termination instead of expecting a shorter-bar Deutsch plug. Inspect the actual supplied hardware and electrical equipment before modifying the installation location.
Read the shipping policy or contact Mariners Warehouse with product and destination questions.
Review the 16 oz gel format, specifications and application directions.
Check fiberglass, gelcoat and finish suitability before use.
Ask about your surface and stain type before ordering.
Review shipping information and return conditions before purchase.
Installation & Compatibility Guides
Check 130313 by its actual fixture, kit or accessory role. Compare mounting space, electrical requirements, control generation and confirmed package contents before installation.
130313 is one E-Series PRO Spot/Flood Combo bar. Similar family names do not establish the same optic, mounting method or quantity.
Verify 9–36V DC and the delivered electrical marking. The exact light has a listed 311W rating; use its own delivered electrical marking and harness instructions. Follow the exact supplied relay-harness instructions.
Measure the full bar, L-bracket arrangement, support spacing, rear clearance and aiming movement before drilling. Current manufacturer body width is 31.5 inches, despite the nominal 30-inch name. Use the supplied relay harness and its exact instructions; the store identifies open leads for the 20–50-inch family, so verify the actual termination instead of expecting a shorter-bar Deutsch plug.
Use the exact Spot/Flood Combo configuration when assessing the target area. Set aim under the model instructions; no raw-lumen figure establishes a guaranteed useful distance or direct replacement fit.
The listing states off-road use only and IP68 compliance. Follow the actual fixture, panel, harness and connection requirements; ingress and vibration compliance are not road-lighting approval.
One light bar, two black powder-coated L-shape brackets, mounting hardware and harness with switch and relay. The store’s 20–50-inch family note identifies open leads rather than a Deutsch light connector; inspect the actual supplied termination.
RIGID 130313 lists Spot/Flood Combo optics and 311W in a nominal 30-inch double-row E-Series PRO format. RIGID 132313 lists Spot/Driving Combo optics and 470W in the same nominal size family. These are different beam and electrical choices.
Choose from the required light distribution and the installation’s electrical plan, then verify the exact support and harness arrangements. The shared nominal length is not a promise of the same circuit requirement or a suitable swap using the existing wiring. Review the RIGID Industries E-Series PRO 30" Spot/Driving Combo - Black MPN - 132313 as a separately sold option.
Choose the product family by the actual fixture, control or accessory task, then check each exact item separately.
Compare each item’s actual lighting or accessory role, mounting, power, controls and package quantity.
Review light bars when the project calls for a bar format. Check each model’s optic, mounting span, circuit and supplied equipment.
Return to the parent collection for another maintenance, replacement or upgrade task. Select each item by its own documented requirements.
Need Help?
Need help comparing RIGID Industries E-Series PRO 30-inch Spot/Flood Combo Light Bar, SKU 97164, MPN 130313? Share your available mounting span and height, support points, desired beam, DC supply and delivered harness configuration. These details help us understand your selection question before you order.
Trusted by 50,000+ boat owners across the USA
Our team has years of experience in marine parts.
We respond quickly to get you the help you need.
We make sure you get the right part the first time.
Access to 50,000+ marine parts & accessories.
Thanks for subscribing!
This email has been registered!