Customer Service
+1 888 812 6287



Couldn't load pickup availability
RIGID Industries E-Series PRO 30-inch Spot/Driving Combo Light Bar, MPN 132313, is a single auxiliary LED light bar. Mariners Warehouse SKU 97166 supplies one RIGID 132313 E-Series PRO light bar. Select this exact optic and mounting format from the measured installation requirements; the black finish identifies the housing, and the listing does not establish a UV-blacklight function.
The 132313 model provides Spot/Driving Combo optics in a black double-row E-Series PRO housing. Its listed aluminum-alloy construction, polycarbonate lens, thermal management and pressure-equalizing vent support the documented auxiliary-light format. The published 470W light rating is different from the 311W Spot/Flood version and the 205W single-row Spot/Driving bar.
Confirm the full 132313 code, supplied relay harness and actual electrical marking before planning the circuit. Measure the complete housing, L-bracket arrangement, support points and aiming space. The nominal 30-inch name is not a mounting-center measurement; the current manufacturer body width is 31.5 inches. Check the actual open-lead termination and follow this model’s own wiring procedure. Follow the listing’s off-road-only restriction and the exact operating and environmental requirements.
Review one RIGID 132313 E-Series PRO light bar and the confirmed configuration before ordering. Check the shipping options and delivery estimate shown for your destination at checkout.
Confirm 132313 and the complete bar assembly. Confirm the full 132313 code, supplied relay harness and actual electrical marking before planning the circuit. Measure the complete housing, L-bracket arrangement, support points and aiming space. The nominal 30-inch name is not a mounting-center measurement; the current manufacturer body width is 31.5 inches. Check the actual open-lead termination and follow this model’s own wiring procedure. Inspect the actual supplied hardware and electrical equipment before modifying the installation location.
Read the shipping policy or contact Mariners Warehouse with product and destination questions.
Review the 16 oz gel format, specifications and application directions.
Check fiberglass, gelcoat and finish suitability before use.
Ask about your surface and stain type before ordering.
Review shipping information and return conditions before purchase.
Installation & Compatibility Guides
Check 132313 by its actual fixture, kit or accessory role. Compare mounting space, electrical requirements, control generation and confirmed package contents before installation.
132313 is one E-Series PRO Spot/Driving Combo bar. Similar family names do not establish the same optic, mounting method or quantity.
Verify 9–36V DC and the delivered electrical marking. The exact light has a listed 470W rating; use its own delivered electrical marking and harness instructions. Follow the exact supplied relay-harness instructions.
Confirm the full 132313 code, supplied relay harness and actual electrical marking before planning the circuit. Measure the complete housing, L-bracket arrangement, support points and aiming space. The nominal 30-inch name is not a mounting-center measurement; the current manufacturer body width is 31.5 inches. Check the actual open-lead termination and follow this model’s own wiring procedure.
Use the exact Spot/Driving Combo configuration when assessing the target area. Set aim under the model instructions; no raw-lumen figure establishes a guaranteed useful distance or direct replacement fit.
The listing states off-road use only and IP68 compliance. Follow the actual fixture, panel, harness and connection requirements; ingress and vibration compliance are not road-lighting approval.
One light bar, two black powder-coated L-shape brackets, mounting hardware and harness with switch and relay. The store’s 20–50-inch family note identifies open leads rather than a Deutsch light connector; inspect the supplied termination.
RIGID 132313 uses a double-row E-Series PRO format with Spot/Driving Combo optics and a listed 470W rating. RIGID 931314 uses a single-row SR-Series PRO format with the same beam-category wording and a listed 205W rating. Their housings and exact beam distributions are model-specific.
Compare mounting envelope, support structure and electrical load before choosing between the two nominal 30-inch bars. Shared Spot/Driving wording does not establish identical coverage, useful distance, connectors or a circuit that can be reused without review. Review the RIGID Industries SR-Series PRO 30" Spot/Driving Combo - Black MPN - 931314 as a separately sold option.
Choose the product family by the actual fixture, control or accessory task, then check each exact item separately.
Compare each item’s actual lighting or accessory role, mounting, power, controls and package quantity.
Review light bars when the project calls for a bar format. Check each model’s optic, mounting span, circuit and supplied equipment.
Return to the parent collection for another maintenance, replacement or upgrade task. Select each item by its own documented requirements.
Need Help?
Need help comparing RIGID Industries E-Series PRO 30-inch Spot/Driving Combo Light Bar, SKU 97166, MPN 132313? Share your available mounting span and height, support points, desired beam, DC supply and delivered harness configuration. These details help us understand your selection question before you order.
Trusted by 50,000+ boat owners across the USA
Our team has years of experience in marine parts.
We respond quickly to get you the help you need.
We make sure you get the right part the first time.
Access to 50,000+ marine parts & accessories.
Thanks for subscribing!
This email has been registered!