A fishfinder sonar device mounted on a kayak seat, showing a blue and yellow underwater depth readout, with a bright turquoise lake and forested shoreline in the background.

HUMMINBIRD LEGACY MARINE ELECTRONICS

Humminbird ONIX & Legacy Fish Finders

Shop available Humminbird ONIX legacy fish finders and verify the exact model, transducer, mounting, network and software requirements before adding to an existing ONIX setup.

Humminbird ONIX & Legacy Fish Finders

Humminbird ONIX fish finders are legacy marine electronics best approached as an exact-model and compatibility purchase. This collection is designed for shoppers maintaining an existing ONIX system, replacing a known unit or evaluating an available Humminbird ONIX 10 configuration. Before ordering, match the full model name and manufacturer part number, then verify your transducer, mounting hardware, power connection, network equipment and software situation.
Humminbird identifies the ONIX series as a legacy product line and still provides model-based compatibility resources for supported transducers and accessories. Use the product listing, selection guide and ONIX compatibility resources below to confirm the details that matter for your installation. For broader current and legacy options, return to Humminbird Fish Finders & Chartplotters.

Sidebar
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • ONIX10CI NT COMBO

    Humminbird ONIX10CI Nt Combo MPN - 409770-1 SKU: 404087
    MPN: 409770-1

    $2,087.99
    $2,087.99
    Humminbird ONIX10CI Nt Combo is listed in the Mariners Warehouse catalog. Use the verified product identifiers below to compare this item with your application before ordering. Brand: Humminbird Product Type: Hummingbird Manufacturer Part Number: 409770-1 SKU: 404087 UPC / Barcode: 082324046056 Please confirm fitment,...
    $2,087.99
    $2,087.99

Check Your ONIX Setup Before Ordering

Use these four checks to evaluate a Humminbird ONIX 10 or another legacy ONIX setup before moving from product discovery to compatibility verification and purchase.

  1. Confirm Your ONIX Model

    Start with the complete Humminbird ONIX model name and part number so you can compare the correct legacy configuration before ordering.

  2. Check Transducer Compatibility

    Use the exact ONIX model and transducer part number to verify Humminbird ONIX transducer compatibility instead of assuming connectors or sonar support match.

  3. Review Legacy Accessories

    Check mounting hardware, power cables and other Humminbird ONIX accessories individually because availability can differ across this legacy product family.

  4. Verify Network and Software

    Before adding a Humminbird ONIX 10 to an existing setup, confirm connected equipment, network requirements and the unit’s current software version.

Humminbird ONIX Configuration & Compatibility

Compare the available Humminbird ONIX configuration by exact model and manufacturer part number, then verify the system details most likely to affect a legacy installation.

Humminbird ONIX10CI NT Combo — MPN 409770-1 ONIX Selection & Compatibility Guidance
Best For — Shoppers maintaining an established ONIX setup or replacing a known Humminbird ONIX 10 configuration. Key Choice — Match the exact ONIX model and manufacturer part number to your intended application before ordering.
Model Verification — Confirm that the Humminbird ONIX10CI NT Combo and MPN 409770-1 match the ONIX configuration you intend to replace or maintain. Transducer Check — Verify Humminbird ONIX transducer compatibility using the exact control-head model and existing transducer part number.
Installation Check — Review mounting hardware, available helm space, power connection and any existing installation components before purchasing. Network Check — Confirm connected Humminbird equipment and ONIX network compatibility before adding the unit to an established marine-electronics system.
Software & Package Check — Record the current software situation and confirm the exact package contents instead of assuming legacy accessories are included. Next Step — View the product details and resolve any compatibility questions before completing the order.

Before ordering a Humminbird ONIX 10, confirm the exact model, MPN, transducer, mounting setup, network equipment and package contents so the legacy configuration matches your existing system and installation requirements.

How to Choose a Humminbird ONIX Setup

Use this Humminbird ONIX buying guide to identify the correct legacy model, verify transducer and installation requirements, review network compatibility, and confirm the exact configuration before ordering.

  1. Identify the Exact ONIX Model

    Before choosing a replacement or adding another Humminbird ONIX unit to your boat, start by identifying the complete model name and manufacturer part number from the existing unit or product listing. Do not rely only on the ONIX family name, display size or physical appearance, because different ONIX configurations may require different compatibility checks. If you are replacing an existing Humminbird ONIX 10, compare the exact model information with the available product before moving to transducer, mounting or network verification.

  2. Check the Mounting and Power Setup

    Review the installation area before ordering a legacy Humminbird ONIX fish finder. Compare the available helm or mounting space with your existing setup, confirm that the required mounting hardware is available, and check the power cable and connection already installed on the boat. An ONIX unit should not be treated as a straightforward physical replacement simply because the screen family looks similar, so mounting and power requirements should be verified alongside the exact model.

  3. Match the Correct Transducer

    Humminbird ONIX transducer compatibility should be checked using the exact control-head model and the transducer part number already installed on your boat. Record the transducer code before ordering and compare it with Humminbird’s model-specific compatibility information instead of assuming that a similar connector confirms sonar support. This step is especially important when replacing an older Humminbird ONIX 10 because legacy transducer availability and compatibility can vary between specific models and sonar configurations.

  4. Review Network and Software Compatibility

    If the Humminbird ONIX unit will become part of an existing marine-electronics system, document the displays, accessories and other equipment already connected before making changes. Humminbird ONIX network compatibility can depend on the exact equipment in the installation, so verify the specific devices you intend to keep rather than assuming all Humminbird generations work together. It is also useful to record the current ONIX software version before planning changes to an established legacy system.

  5. Confirm the Complete Legacy Purchase

    Before checkout, review the exact Humminbird ONIX product listing, model name and manufacturer part number one final time, then confirm what is actually included with the available unit. Do not assume that mounting hardware, transducers, cables or other Humminbird ONIX accessories are included unless the product page states this clearly. Any unresolved questions about installation, transducer compatibility, networking or package contents should be checked before purchasing a legacy Humminbird fish finder.

What Customers Say

Solid Cross Touch display and reliable legacy performance

The Humminbird ONIX series still provides impressive screen clarity and dual-control functionality. The Cross Touch interface works smoothly, allowing quick toggles between touch commands and physical keypad buttons when running through choppy water.
Arthur Vance Verified buyer
August 2026

Great Side Imaging detail on a legacy chartplotter

Down Imaging and Side Imaging target separation are still very sharp on this unit. It picks up submerged timber and rock piles clearly. Mounting the unit with the provided gimbal bracket was straightforward.
Elliot Linwood Verified buyer
July 2026

Reliable Ethernet networking and map charting

Connected the ONIX unit into my existing boat network via Ethernet without hassle. Waypoint sharing and AutoChart mapping functions operate quickly with good overall depth tracking.
Gareth Sterling Verified buyer
June 2026

Bright glass screen with easy transom transducer wiring

The glass display stays easy to read even under high midday sunlight. Installation took less than two hours using the included wiring harness and transducer mounting template.
Julian Mercer Verified buyer
May 2026

Durable hardware build and intuitive menu layout

The ONIX unit arrived securely packaged with all core installation hardware. Customizable split-screen views make watching 2D CHIRP sonar and chart plotting side-by-side very effective.
Tobias Rhodes Verified buyer
April 2026

Helpful Guides

Explore guides and tips related to this collection.

Humminbird ONIX 10 compatibility checklist with transducer, mount and cables

Humminbird ONIX 10 Compatibility Checklist

Legacy ONIX Buyer Guide Humminbird ONIX 10 Compatibility Checklist Confirm the exact control head, transducer, mounting hardware, power connection, Ethernet...

Read More →
Dual marine displays connected through an existing Humminbird ONIX network

Before Adding to an Existing ONIX Network

Marine Network Planning Before Adding to an Existing ONIX Network Map the displays, software, Ethernet path and shared functions already...

Read More →
Legacy Humminbird fish finder inspected with mount, transducer and cables

Before Buying a Legacy Humminbird Fish Finder

Legacy Marine Electronics Before Buying a Legacy Humminbird Fish Finder Evaluate identity, compatibility, condition and total installed cost before committing...

Read More →

Frequently Asked Questions

Is the Humminbird ONIX series a legacy product line?

Yes. Humminbird identifies ONIX as a legacy series and states that the ONIX product family was sold between 2014 and 2016. Humminbird also states that it no longer sells or repairs ONIX units, so exact compatibility and support status should be checked before purchasing legacy hardware.

Who should consider a legacy Humminbird ONIX fish finder?

A legacy Humminbird ONIX fish finder is most relevant when you already have an established ONIX installation, need to replace a known model or have a clearly verified application. Start with the exact model and manufacturer part number rather than choosing an ONIX unit only by screen family or appearance.

How do I identify the correct Humminbird ONIX 10 model?

Use the complete model designation and manufacturer part number. ONIX 10 was produced in multiple configurations, so a general “ONIX 10” description is not enough to confirm the correct replacement or compatible accessories. Compare the model label, listing and existing system information before ordering.

Which transducers are compatible with Humminbird ONIX fish finders?

Transducer compatibility depends on the exact ONIX model and transducer. Humminbird’s current compatibility resources include ONIX and allow buyers to check a specific unit against compatible transducers. Record the transducer part number from your existing installation before treating any replacement as confirmed.

What should I verify before replacing an existing ONIX unit?

Verify the exact ONIX model, MPN, transducer, mounting arrangement, power connection and connected equipment. You should also record the current software version and check whether required legacy accessories remain available. A matching family name alone does not confirm a complete replacement path.

Can a Humminbird ONIX 10 work with my existing network equipment?

It may, but compatibility must be checked against the exact ONIX model and every connected device. Legacy ONIX installations can include equipment from different generations, so document the existing Humminbird units, trolling-motor interfaces, Ethernet equipment and accessories before changing the network.

Are Humminbird ONIX software updates still available?

Humminbird still documents ONIX software information, but the manufacturer specifically advises against updating ONIX units because the series is no longer repairable or replaceable. Record your current software version and review official guidance before making any software change to a working ONIX system.

Are replacement mounts and accessories still available for ONIX?

Availability varies by accessory. Humminbird states that ONIX gimbal mounts are no longer available, while certain other legacy items such as a power cable may still be supported or documented. Check every Humminbird ONIX accessory individually instead of assuming the full original accessory range remains available.

How does ONIX differ from current Humminbird display families?

ONIX is a legacy Humminbird product family rather than a current display line. Current Humminbird families use different hardware, software, accessories and compatibility paths, so do not assume an ONIX replacement is interchangeable with a newer display simply because both are Humminbird products.

What information should I send Mariners Warehouse for ONIX compatibility help?

Send the exact ONIX model or MPN, your existing transducer part number, mounting details, current software version and the other marine electronics connected to your system. Also explain which sonar, mapping or networking functions you need to retain so the compatibility question is specific rather than general.

Need Help?

Still Can't Find the Right Marine Part?

Need help checking a Humminbird ONIX 10 or another legacy ONIX setup? Send the exact model or MPN, existing transducer part number, mounting details, connected network equipment and the sonar or mapping functions you need to retain.

Contact Marine Experts Browse All HUMMINBIRD

Trusted by 50,000+ boat owners across the USA

A man wearing a navy blue polo shirt with a circular logo sits at a desk holding a metal engine component, with a laptop in front of him and a boat propeller on the table. A dark blue informational overlay on the right lists benefits like 'Talk to an Expert' and 'Find the Right Part'.

  • Expert Marine Support

    Our team has years of experience in marine parts.

  • Fast Response

    We respond quickly to get you the help you need.

  • Find Compatible Parts

    We make sure you get the right part the first time.

  • Huge Selection

    Access to 50,000+ marine parts & accessories.

Have a Part Number or Engine Model?

Send it to us and our experts will help you find the exact part you need.

Recently Viewed Products