Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Customer Service
+1 888 812 6287


Couldn't load pickup availability
The Xantrex PRO Series XM 1800, MPN 806-1810, is an 1800-watt inverter that converts 12-volt DC battery power to 120-volt AC modified sine wave power. It is intended for RVs, heavy-duty trucks, coaches, work vehicles and boats that need more AC capacity than a 1000-watt unit provides. It is a standalone inverter for systems that already recharge their batteries with a separate charger or generator. The XM 1800 does not charge batteries.
A built-in transfer switch senses when generator or shore power is present and switches over automatically, so hardwired circuits are fed from the external source when it is available and from the inverter when it is not. The store listing states up to 25 amps of pass-through for hardwired loads and a 15-amp built-in circuit breaker protecting loads on the included GFCI receptacle. AC can be wired through the hardwire terminal strip or used at the receptacle. The detachable digital remote displays inverter output, AC source and battery status. The circuit boards are conformal-coated for humid conditions, and the unit mounts horizontally or vertically. Protection covers battery over- and under-voltage, over-temperature, overload, short circuit and ground fault.
An 1800-watt inverter draws much more DC current from a 12-volt bank than a 1000-watt model. Battery capacity, DC cable size and over-current protection all need to match the XM 1800 owner's guide. Because the output is modified sine wave, confirm that motor-driven, variable-speed and sensitive electronic loads will operate on it before relying on the inverter for them. Xantrex lists ETL certification to CSA C22.2 No. 107.1 and FCC Class B compliance. Its UL 458 Marine Supplement listing applies when the inverter is installed with drip shield part 808-1050, which is not included in this listing.
This listing ships one XM 1800 inverter. The shipping options and delivery estimate for your address appear at checkout. Our full terms are on the shipping policy page: https://marinerswarehouse.com/policies/shipping-policy
Before installation, confirm a 12-volt battery bank with enough capacity for the loads you plan to run, plus a separate charging source. Plan a dry, ventilated location close to the batteries so the high-current DC cables stay short. Take DC cable size, fuse or breaker rating and grounding from the XM 1800 owner's guide. Have AC hardwiring to the distribution panel completed by a qualified installer to the applicable electrical standard.
Review the 16 oz gel format, specifications and application directions.
Check fiberglass, gelcoat and finish suitability before use.
Ask about your surface and stain type before ordering.
Review shipping information and return conditions before purchase.
Installation & Compatibility Guides
The XM 1800 supplies up to 1800 W of 120 V AC from a 12 V bank and transfers to shore or generator power automatically. Check these six points first.
The XM 1800 is a 12-volt inverter. It is not for 24-volt or 48-volt battery systems.
High continuous output means high DC current. Make sure the battery bank can support your expected load and runtime.
Keep the loads that run together within 1800 W continuous. Use the surge rating only for brief motor-starting demand.
Confirm that each appliance runs on modified sine wave power. Choose a true sine wave inverter for sensitive or variable-speed loads.
Use the XM 1800 owner's guide for DC cable size, over-current protection and grounding, and keep the DC runs short.
Stay within the listed 25 A hardwired pass-through. For the UL 458 Marine Supplement listing, add drip shield 808-1050.
The XM 1800 and XM 1000 share the same PRO Series features: modified sine wave output, a built-in transfer switch, a hardwire terminal strip, a GFCI receptacle and a detachable remote. The difference is capacity. The XM 1800 is rated at 1800 W continuous, against 1000 W for the XM 1000, so it can run larger combinations of loads at once. In exchange, it needs a battery bank and DC wiring sized for higher current. The smaller unit is listed here.
If your loads include variable-speed tools, microwaves or sensitive electronics, compare a true sine wave inverter at a similar rating. The Xantrex PROwatt SW2000 delivers 1800 W continuous true sine wave output from 12 V through dual GFCI receptacles. Choose by waveform, continuous rating and whether you need built-in transfer switching to hardwired circuits.
Use these collections to compare inverters, inverter/chargers and other RV equipment. A collection link is for browsing and does not confirm compatibility.
Browse inverters by DC input, continuous output, waveform and AC connection type.
If you also need battery charging from shore power, review combined units and chargers. This link does not establish a compatible pairing.
Return to the parent collection to find another product family for your RV, truck or boat project.
Need Help?
Need help comparing Xantrex PRO Series XM 1800 Inverter, SKU 31358, MPN 806-1810? Share your 12-volt battery-bank capacity, the AC appliances and wattages you expect to run together, and whether the transfer switch will feed hardwired circuits. These details help us understand your selection question before you order.
Trusted by 50,000+ boat owners across the USA
Our team has years of experience in marine parts.
We respond quickly to get you the help you need.
We make sure you get the right part the first time.
Access to 50,000+ marine parts & accessories.
Thanks for subscribing!
This email has been registered!