Customer Service
+1 888 812 6287


Couldn't load pickup availability
The Xantrex PROwatt SW 2000i, MPN 806-1220-01, is the highest-output model in the PROwatt SW International range. It converts 12-volt DC battery power into true sine wave 230-volt, 50 Hz AC, and Xantrex rates it at 2000 watts continuous and 4000 watts surge. It suits vehicles, RVs, work trucks and boats that run 230 V equipment, including variable-speed power tools, advanced appliances and microwaves designed for 230 V markets. It is not for standard North American 120-volt appliances. The 2000i is a standalone inverter. It does not charge batteries.
AC output is through a Schuko outlet, and the display shows DC voltage, AC output power and error codes. The inverter accepts 10.5 to 15.5 volts DC and produces 230 V AC ±10% at 50 Hz ±0.5 Hz, with 90% optimal efficiency and under 1000 mA of no-load current draw. An audible low-battery alarm sounds at 11 V DC, and the inverter cuts out at 10.5 V DC. The store listing adds overvoltage protection at 15.5 V DC and overload and over-temperature shutdown. Xantrex lists E-mark and CE marking under the Low Voltage Directive (EN 50178) and EMC Directive (EN 61000-6-1 and EN 61000-6-3). The housing measures 4.5 × 9.5 × 16.5 inches (11.5 × 24.0 × 41.8 cm) and weighs 12.1 pounds, and Xantrex lists a two-year warranty.
At 2000 watts from a 12-volt bank, DC current is high. Battery capacity, DC cable size and over-current protection must be selected from the PROwatt SW International owner's guide. Xantrex lists the Remote On/Off Switch, part 808-9001, and a 50-foot remote cable, part 31-6262-00, as optional accessories. With the remote, ignition lockout switches off the inverter output when the vehicle ignition is off. Confirm that every connected device is rated for 230 V, 50 Hz and fits a Schuko plug.
This listing ships one PROwatt SW 2000i inverter. The shipping options and delivery estimate for your address appear at checkout. Our full terms are on the shipping policy page: https://marinerswarehouse.com/policies/shipping-policy
Before ordering, confirm that your equipment is rated for 230 V, 50 Hz with Schuko plugs and that your 12-volt battery bank can supply 2000-watt loads for the runtime you need. Mount the inverter in a dry, ventilated location close to the batteries, and size the DC cables and over-current protection from the owner's guide.
Review the 16 oz gel format, specifications and application directions.
Check fiberglass, gelcoat and finish suitability before use.
Ask about your surface and stain type before ordering.
Review shipping information and return conditions before purchase.
Installation & Compatibility Guides
The PROwatt SW 2000i is a high-output 230 V, 50 Hz inverter. Check these six points before you buy.
Only connect devices rated for 230 V AC at 50 Hz. North American 120 V appliances need a 120 V inverter.
AC output is through a Schuko outlet. Confirm that your equipment's plug fits it without improvised adapters.
Size sustained loads to 2000 W continuous. Use the 4000 W surge only for brief starting demand.
2000 W from 12 V means high DC current. Make sure the battery bank supports the load and the runtime you need.
Take DC cable size and over-current protection from the PROwatt SW International owner's guide.
Allow for the 4.5 × 9.5 × 16.5 in housing and keep the location within the 0–40 °C operating range.
The PROwatt SW 2000i (806-1220-01) and PROwatt SW 2000 (806-1220) share the PROwatt SW design but differ in output. The 2000i produces 230 V AC at 50 Hz through a Schuko outlet and is rated at 2000 W continuous and 4000 W surge. The North American SW 2000 produces 104–127 V AC at 60 Hz through dual GFCI receptacles and is rated at 1800 W continuous and 3000 W surge. Equipment rated for one output voltage should not be connected to the other.
Choose the 2000i only when you run 230 V, 50 Hz equipment. For US and Canadian appliances, compare the PROwatt SW 2000. For a smaller 230 V inverter, the PROwatt SW 700i is rated at 700 W continuous.
Use these collections to compare inverters, inverter/chargers and other RV equipment. A collection link is for browsing and does not confirm compatibility.
Browse inverters by AC output voltage and frequency, continuous output, waveform and outlet type.
If you also need battery charging, review combined units and chargers. This link does not establish a compatible pairing.
Return to the parent collection to find another product family for your RV, truck or boat project.
Need Help?
Need help comparing Xantrex PROwatt SW 2000i 230V Inverter, SKU 42670, MPN 806-1220-01? Share the voltage, frequency, plug type and wattage of the equipment you plan to power, plus your battery voltage and capacity. These details help us understand your selection question before you order.
Trusted by 50,000+ boat owners across the USA
Our team has years of experience in marine parts.
We respond quickly to get you the help you need.
We make sure you get the right part the first time.
Access to 50,000+ marine parts & accessories.
Thanks for subscribing!
This email has been registered!