Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Customer Service
+1 888 812 6287


Couldn't load pickup availability
The Xantrex Freedom HF 1800, MPN 806-1840, puts an inverter, a battery charger and an automatic transfer relay in one housing. On battery power it delivers 1800 W continuous and 3600 W surge of 115 V, 60 Hz modified sine wave AC from a 12 V battery bank. When shore power or a generator is connected, the unit passes AC through its 30 A relay and recharges the batteries at up to 40 A.
The charger is three-stage, with a 14.2 V bulk and 13.5 V float voltage according to Xantrex. It has no equalize stage. The inverter shuts down to protect the battery at a low-battery cut-out of 10.5 V or 11.8 V, and it draws less than 10 W at no load. That makes it suited to RVs and boats that run moderate kitchen appliances, tools and electronics from a 12 V battery bank.
Modified sine wave output runs most resistive loads, lighting and many motors. Some equipment, including certain chargers, audio gear and variable-speed devices, may run warmer or noisier than on pure sine wave power. Check your loads before choosing it. The remote panel, 808-1840, is sold separately and does not include its cable.
This listing is for one Xantrex Freedom HF 1800 inverter/charger, MPN 806-1840. The shipping options and delivery estimate for your address appear at checkout. Our full terms are on the shipping policy page: https://marinerswarehouse.com/policies/shipping-policy
Before installation, confirm a 12 V battery bank that can support 1800 W loads and accept 40 A of charge current. Mount the unit in a dry, ventilated location close to the battery, and take DC cable size and fusing from the Xantrex Freedom HF manual. Marine installations to the UL458 Marine Supplement require drip shield 808-1050.
Review the 16 oz gel format, specifications and application directions.
Check fiberglass, gelcoat and finish suitability before use.
Ask about your surface and stain type before ordering.
Review shipping information and return conditions before purchase.
Installation & Compatibility Guides
The Xantrex Freedom HF 1800 inverts, charges and transfers AC in one unit. Check these six points before you buy.
The 806-1840 is a 12-volt unit with a 10.5–15.5 V operating range. It is not for 24 V systems.
Keep sustained loads within 1800 W. Confirm sensitive electronics and variable-speed tools run correctly on modified sine wave.
The 40 A charger uses 14.2 V bulk and 13.5 V float. Confirm these suit your battery type.
Shore or generator AC passes through a 30 A relay. Wire the input and output protection to suit.
Take cable gauge and fuse rating from the Xantrex manual, and keep the battery cables short.
The 808-1840 remote is optional. Its RJ12 cable is sold separately, so order the length you need.
A standalone inverter only turns battery power into AC, and a standalone charger only recharges the battery. The Xantrex Freedom HF 1800 does both and adds a 30 A transfer relay, so connected loads switch between shore or generator power and battery power automatically.
Choose the HF 1000 (806-1020) if you need a 1000 W inverter and 20 A charger. If your loads need pure sine wave power, compare the true sine wave inverter/chargers in this collection instead.
Use these collections to compare inverter/chargers, inverters and other RV and marine equipment. A collection link is for browsing and does not confirm compatibility.
Compare combined inverter/chargers and chargers by inverter output, charge current, battery voltage and AC configuration.
Browse standalone inverters if you already have a separate charger. This link does not establish a compatible pairing.
Return to the parent collection to find another product family for your RV, vehicle or boat project.
Need Help?
Not sure whether the Xantrex Freedom HF 1800 fits your RV or boat loads and battery bank? Send us the model number and your system details, and our team will help you check the fit.
Trusted by 50,000+ boat owners across the USA
Our team has years of experience in marine parts.
We respond quickly to get you the help you need.
We make sure you get the right part the first time.
Access to 50,000+ marine parts & accessories.
Thanks for subscribing!
This email has been registered!