Customer Service
+1 888 812 6287


Couldn't load pickup availability
TACO Marine V30-0748B8-2 Hatch Tape — 8 Feet, Black, Mariners Warehouse SKU 49544, supplies an adhesive-backed replacement contact seal for a documented suitable hatch or enclosure application. This exact purchase provides 8 feet in black with a 3/4-inch width. Select it by the original cross-section, available contact surface and closed gap rather than by a general RV or marine category name.
The flexible sponge-rubber compound provides a cushioning contact surface to help reduce hatch rattling when the profile and closure are correctly matched. Adhesive backing holds the tape to a suitably prepared surface. The 3/4-inch width is shared with the separately listed alternate hatch-tape height, so length and width alone do not identify the right compression fit.
Measure the full contact path, original profile and closed gap before removing the old material. Check the surface and coating are suitable for the exact adhesive-backed seal. Follow TACO’s preparation guidance: remove contaminants, peel the liner without lifting the adhesive, lay the seal without stretching and press it into position. The manufacturer’s application guidance gives 60–100°F as the recommended installation temperature; this is not a cured-service temperature rating. Use only a preparation product appropriate to the surface and exact instructions. Check latch operation and even contact after fitting; do not force a closure to compress an incorrectly sized seal. Review the non-returnable designation before ordering or cutting.
Review one 8-foot black seal length and the confirmed configuration before ordering. Check the shipping options and delivery estimate shown for your destination at checkout.
Measure the full contact path, original profile and closed gap before removing the old material. Check the surface and coating are suitable for the exact adhesive-backed seal. Follow TACO’s preparation guidance: remove contaminants, peel the liner without lifting the adhesive, lay the seal without stretching and press it into position. The manufacturer’s application guidance gives 60–100°F as the recommended installation temperature; this is not a cured-service temperature rating. Use only a preparation product appropriate to the surface and exact instructions. Check latch operation and even contact after fitting; do not force a closure to compress an incorrectly sized seal. Review the non-returnable designation before ordering or cutting. Inspect the delivered parts before starting the work.
Read the shipping policy or contact Mariners Warehouse with product and destination questions.
This product is marked non-returnable to the original point of purchase in the store source. Confirm the exact profile, supplied dimensions, length and application before ordering or cutting. The listing directs product issues or concerns to the manufacturer; contact Mariners Warehouse for guidance.
Review the 16 oz gel format, specifications and application directions.
Check fiberglass, gelcoat and finish suitability before use.
Ask about your surface and stain type before ordering.
Review shipping information and return conditions before purchase.
Application Guides
Check V30-0748B8-2 by its actual seal or edge-trim role. Confirm substrate, coating, profile, preparation, application and supplied length before choosing.
Choose this profile for a suitable hatch/door/enclosure contact path. It is not a liquid roof sealant, structural adhesive or clip-on edge trim.
Compare the 3/4-inch contact width, original cross-section and real coating/material. Use the listed 1/4-inch uncompressed height as part of the fit check, not as the closed-gap value.
Measure the closed gap and inspect latches and hinges. A thicker seal can interfere with closing; do not select by length alone or assume universal compression.
Remove contaminants under the exact instructions and use surface-compatible preparation supplies. Keep the adhesive on the seal when removing its liner.
Follow TACO’s 60–100°F installation guidance, press into place and avoid stretching. Confirm contact and normal closing operation after fitting.
One 8-foot black length is supplied; enclosure and preparation tools are separate. The store source marks this product non-returnable to the original point of purchase. Verify before cutting or ordering.
V30-0744B8-2 supplies 8 feet of black hatch tape, 1/8 inch high by 3/4 inch wide. V30-0748B8-2 supplies the separate 1/4-inch-high version with the same listed length and width. Height changes the available compression and closing fit.
Choose the profile that matches the actual contact land, gap and supported closure arrangement. The thicker tape is not automatically a better seal. Check hinges/latches, avoid stretching during installation and review the non-returnable designation before ordering. Review the TACO Marine V30-0744B8-2 Hatch Tape — 8 Feet, Black as a separately sold option.
Choose by the actual repair function, substrate, profile and application instructions, then compare exact package contents.
Compare replacement seals, edge trim and repair products by their own documented role, dimensions and installation requirements.
Review cleaning products for a separate surface-care task. Check the exact material and label; category placement does not establish adhesive-preparation compatibility.
Return to the parent collection for another maintenance or replacement task. Check every item’s own requirements.
Need Help?
Need help comparing TACO Marine V30-0748B8-2 Hatch Tape — 8 Feet, Black, SKU 49544, MPN V30-0748B8-2? Share your original seal cross-section, uncompressed measurements, closed gap, contact-surface material/coating, total perimeter and latch condition. These details help us understand your selection question before you order.
Trusted by 50,000+ boat owners across the USA
Our team has years of experience in marine parts.
We respond quickly to get you the help you need.
We make sure you get the right part the first time.
Access to 50,000+ marine parts & accessories.
Thanks for subscribing!
This email has been registered!