Hull Shield Signal Cable Extension for Ultrasonic Transducer adds 15 feet of signal-cable length between a compatible Hull Shield controller and ultrasonic transducer. It can support a new routed connection or extend an existing compatible signal-cable run.
Confirm the controller series, transducer generation, connector type and complete routed distance before ordering. This is a low-voltage ultrasonic signal cable, not a controller power lead or a Quick thruster-control extension. Always de-energize the Hull Shield controller before connecting or disconnecting a signal cable.
Choose the Hull Shield 15 ft Signal Cable Extension with Confidence
-
-
Controller-to-Transducer
-
Route Flexibility
-
Factory Connection
Confirm the Correct Cable and Route
| Selection Point | Hull Shield 15 ft Signal Extension |
|---|---|
| Cable length | 15 feet / approximately 4.57 meters |
| Primary use | Extend a compatible ultrasonic-transducer signal run |
| Connection path | Compatible Hull Shield controller to compatible Hull Shield transducer |
| Required check | Controller series, transducer generation and connector match |
| Not interchangeable with | Controller power cable, general-purpose wire or Quick TCD thruster-control cable |
Compatibility and Installation Checks for Hull Shield 15 ft Signal Cable Extension
-
Identify the Controller
-
Identify the Transducer
-
Measure the Route
-
Isolate Power
Hull Shield 15 ft Signal Cable Extension Reviews
Perfect 15ft extension for long cable runs to the helm
Needed an extra 15 feet to route my ultrasonic transducer cable from the stern through the starboard wire chase up to the main console. The waterproof connectors locked together firmly with a tight seal, and signal clarity was 100% maintained with zero interference.
Heavy-duty marine jacketing and zero signal loss
Extended my ultrasonic transducer signal cable using this 15-foot harness. The shielding on the cable keeps electrical noise out, and the molded connectors fit seamlessly. Excellent build quality that holds up very well in damp bilge environments.
Plug-and-play installation for ultrasonic system
Simple plug-and-play operation with no wire splicing required. The 15-foot length gave me just enough slack to cleanly route and secure the cable along the hull frames. Fast shipping and accurate product details from Mariners Warehouse.
Watertight connections and flawless performance
Used this 15' extension cable on a 36-foot center console setup where the standard transducer cord couldn't reach the control module. Pin layout was an exact match, and the waterproof collar prevents moisture intrusion in high-humidity areas.
Solved our reach issues without degrading signal quality
Highly recommend this extension if you have a larger hull or flybridge control station. The 15-foot transducer extension carried the high-frequency ultrasonic signal cleanly without any signal degradation or pulse loss. Very satisfied with this purchase.
Hull Shield 15 ft Signal Cable Extension FAQs
How long is this Hull Shield signal cable extension?
It adds 15 feet, approximately 4.57 meters, to a compatible ultrasonic-transducer signal route.
What does the cable connect?
It carries the ultrasonic signal between a compatible Hull Shield controller and transducer, or extends an existing compatible signal cable.
Does it supply power to the controller?
No. This is a transducer signal-cable extension, not the controller power lead.
Is it compatible with every Hull Shield system?
Compatibility must be confirmed by controller series, transducer generation and connector type. Do not assume all generations are interchangeable.
Can it be connected while the controller is on?
No. De-energize the controller before connecting or disconnecting any transducer signal cable.
Can multiple extensions be joined together?
Confirm the permitted total length and number of extensions in the current Hull Shield installation instructions before combining cables.
Is this the same as the Quick 8M TCD cable?
No. The Quick cable serves a thruster-control system. This 15-foot cable is for a compatible Hull Shield ultrasonic-transducer signal connection.
Need Help?
Need Help Matching the Hull Shield Signal Cable?
Trusted by 50,000+ boat owners across the USA
-
Expert Marine Support
Our team has years of experience in marine parts.
-
Fast Response
We respond quickly to get you the help you need.
-
Find Compatible Parts
We make sure you get the right part the first time.
-
Huge Selection
Access to 50,000+ marine parts & accessories.
- Choosing a selection results in a full page refresh.