Shurhold Shur-Dry Adapter f/ Waterblade
Shurhold Shur-Dry Adapter f/ Waterblade

Shurhold Shur-Dry Adapter for Waterblade MPN - 265

$17.98
$19.78
$17.98

MPN : 265

SKU: 32950
Availability: In stock
Product type: Winterizing | Cleaning,Boat Outfitting | Cleaning
Please hurry! Only 9 left in stock
Subtotal: $17.98
Shurhold Shur-Dry Adapter f/ Waterblade

Shurhold Shur-Dry Adapter for Waterblade MPN - 265

$19.78 $17.98
Shurhold Shur-Dry Adapter f/ Waterblade

Shurhold Shur-Dry Adapter for Waterblade MPN - 265

$19.78 $17.98

    The Shurhold 265 Shur-Dry Adapter connects the compatible Water Blade to a Shurhold handle. Choose this fitting when you already have the blade or are building a separate blade-and-handle drying setup.

    Adapter 265 is the connection component in a handle-mounted Water Blade setup. It helps you use the compatible 260 blade beyond close handheld reach, while leaving handle selection to the working distance and access around your boat. Confirm that you have the blade as well as a compatible Shurhold handle before ordering the fitting alone. Inspect each connection before assembly and check that the blade is retained in the adapter. Start with a manageable handle length and verify the assembled position on a small cleaned section. Reposition around fittings rather than extending farther than you can comfortably control.

    Related Products

    Example product title
    $17.98
    $19.78
    $17.98
    Example product title
    $17.98
    $19.78
    $17.98
    Example product title
    $17.98
    $19.78
    $17.98
    Example product title
    $17.98
    $19.78
    $17.98
    Example product title
    $17.98
    $19.78
    $17.98
    Example product title
    $17.98
    $19.78
    $17.98
    Example product title
    $17.98
    $19.78
    $17.98
    Example product title
    $17.98
    $19.78
    $17.98
    Example product title
    $17.98
    $19.78
    $17.98
    Example product title
    $17.98
    $19.78
    $17.98

    Shurhold Shur-Dry Adapter for Waterblade Selection Guide

    The Shurhold 265 Shur-Dry Adapter connects the compatible Water Blade to a Shurhold handle. Choose this fitting when you already have the blade or are building a separate blade-and-handle drying setup.

    1. Choose 265 as the Connection Part

      Select the 265 when you need to connect a compatible Water Blade to your handle. Check your existing equipment so the adapter fills the missing part of the setup.

    2. Match the Adapter With Blade 260

      Identify the blade model before ordering a connector. Confirm Water Blade 260 compatibility and avoid assuming every squeegee profile can be retained by this adapter.

    3. Confirm the Shurhold Handle Fit

      Check the handle interface before building the extended drying setup. Assemble the blade, 265 adapter and compatible handle together, then verify each connection before using additional reach.

    4. Keep the Blade and Adapter Listings Separate

      The 265 supplies the connection component, while the 260 supplies the silicone edge. Review both listings so your order includes the equipment needed for the planned drying task.

    Shurhold Shur-Dry Adapter 265 connecting a long handle to a Water Blade while cleaning water from a boat surface.

    Add Handle Reach to Your Existing Water Blade

    Adapter 265 is the connection component in a handle-mounted Water Blade setup. It helps you use the compatible 260 blade beyond close handheld reach, while leaving handle selection to the working distance and access around your boat. Confirm that you have the blade as well as a compatible Shurhold handle before ordering the fitting alone.

    Inspect each connection before assembly and check that the blade is retained in the adapter. Start with a manageable handle length and verify the assembled position on a small cleaned section. Reposition around fittings rather than extending farther than you can comfortably control.

    Shurhold Shur-Dry Adapter for Waterblade Selection Comparison

    Compare the product configuration with your intended task, existing equipment and available working space. Check compatibility with Water Blade 260.

    Selection Point Shurhold Shur-Dry Adapter for Waterblade
    265 Connection adapter
    260 Silicone blade, separate
    Handle Compatible Shurhold handle, separate
    Selection Check all three components before assembly

    Shurhold Shur-Dry Adapter for Waterblade Use & Care

    Adapter 265 is the connection component in a handle-mounted Water Blade setup. It helps you use the compatible 260 blade beyond close handheld reach, while leaving handle selection to the working distance and access around your boat. Confirm that you have the blade as well as a compatible Shurhold handle before ordering the fitting alone.

    Inspect each connection before assembly and check that the blade is retained in the adapter. Start with a manageable handle length and verify the assembled position on a small cleaned section. Reposition around fittings rather than extending farther than you can comfortably control.

    1. Inspect the 265 Before Assembly

      Check the adapter and blade contact areas for contamination or damage. Clear residue before fitting the components so you can inspect the connection without debris hiding the joint.

    2. Check Blade Retention Before Drying

      Confirm the compatible blade is held in the 265 adapter before bringing it onto a cleaned surface. Recheck retention whenever you detach or change the assembly.

    3. Use Reach You Can Guide Comfortably

      Begin with a manageable handle extension and check the blade approach. Move closer around restricted fittings instead of keeping an awkward reach throughout the drying route.

    4. Clean the Adapter After the Wash

      Remove residue from the 265 and follow the supplied care instructions. Keep the fitting protected in storage and inspect its connection again before assembling the next drying setup.

    Shurhold Shur-Dry Adapter for Waterblade Reviews

    When reading customer feedback, check that it concerns this exact model and a similar task. Consider the accessory setup, surface and working conditions described by the reviewer.

    Seamless connection between Water Blade and Shur-LOK handle

    The Shurhold Shur-Dry Adapter (MPN 265) fits snugly onto the water blade and snaps securely into my Shurhold extension pole. It makes reaching high boat windshields and hardtops effortless.
    Caleb Vance Verified buyer
    August 2026

    Sturdy construction with no wobble during drying

    Locks into place tightly without any slop or movement when applying pressure. Drying the top gelcoat and glass panels from the deck is much faster and safer now.
    Zachary Holloway Verified buyer
    July 2026

    Essential accessory for extended reach washdowns

    Allows you to use the Shurhold flexible silicone blade on high surfaces without needing a ladder. Simple snap-in design, durable plastic, and works exactly as advertised.
    Gideon Sterling Verified buyer
    June 2026

    Saves time and effort when drying high cabin glass

    Easily attaches to the blade and pairs with all standard Shur-LOK handles. Great design that holds the water blade at the correct angle for smooth drying sweeps.
    Ethan Rochester Verified buyer
    May 2026

    Fast shipping and genuine Shurhold part from Mariners Warehouse

    Arrived promptly and packaged well. A must-have adapter if you already own a Shurhold pole system and the flexible water blade.
    Marcus Prescott Verified buyer
    April 2026

    Shurhold Shur-Dry Adapter for Waterblade FAQs

    What does the 265 do?
    It connects the compatible Water Blade to a Shurhold handle.
    Which blade should I check?
    Water Blade 260.
    Does this listing include the silicone blade?
    No. This listing identifies the adapter; select the blade separately.
    Does it include a long handle?
    Select a compatible Shurhold handle separately.
    Will every brand of blade fit?
    Check the exact blade profile and manufacturer compatibility before ordering.
    Can I use the 260 without the adapter?
    The 260 can be used by hand; the adapter is needed for the described handle-mounted setup.
    What should I check after assembly?
    Blade retention and the adapter-to-handle connection.
    Can I add Handle Mate PFD?
    The manufacturer excludes Handle Mate PFD from the Water Blade system.
    How should I choose handle reach?
    Choose the shortest comfortable reach for controlled blade contact and move your stance as access changes.
    What details help with a fit question?
    Send 265, your blade model and the Shurhold handle model you plan to use.

    Need Help?

    Need Help Choosing Shurhold Shur-Dry Adapter for Waterblade?

    Send your blade and handle models before choosing the connector. Our marine team can help check whether adapter 265 completes your intended drying setup.

    Contact Marine Experts Browse All Marine Parts

    Trusted by 50,000+ boat owners across the USA

    A man wearing a navy blue polo shirt with a circular logo sits at a desk holding a metal engine component, with a laptop in front of him and a boat propeller on the table. A dark blue informational overlay on the right lists benefits like 'Talk to an Expert' and 'Find the Right Part'.

    • Expert Marine Support

      Our team has years of experience in marine parts.

    • Fast Response

      We respond quickly to get you the help you need.

    • Find Compatible Parts

      We make sure you get the right part the first time.

    • Huge Selection

      Access to 50,000+ marine parts & accessories.

    Have a Part Number or Engine Model?

    Send it to us and our experts will help you find the exact part you need.

    Recently Viewed Products