Customer Service
+1 888 812 6287


Couldn't load pickup availability
The Samlex DC-1000-KIT is a DC installation kit that connects an inverter to its battery bank. It contains two 10 ft AWG #4 flexible copper cables, one red and one black, with crimped ring lugs for 3/8 in studs, plus an MRBF-100 100 A marine rated battery fuse assembly and the hardware to secure the cable run.
Samlex sizes the kit by inverter power. It recommends the DC-1000-KIT for inverters of 600–800 W at 12 V, based on a 10 ft cable run with up to 3% voltage drop and DC current equal to the fuse rating. The cables are rated 600 V and −50 to 105 °C with an EPR jacket. The MRBF fuse mounts directly on the battery terminal, is ignition protected to SAE J1171 and is rated IP66.
Check that your inverter's DC terminals accept 3/8 in ring lugs before ordering. Samlex notes that some inverters need pin-type lugs, so the supplied lugs may need to be changed. Compare the DC-2000-KIT (200 A) if your inverter falls in a different size range.
This listing is for one Samlex DC-1000-KIT installation kit with two cables, a 100 A fuse assembly and hardware. The shipping options and delivery estimate for your address appear at checkout. Our full terms are on the shipping policy page: https://marinerswarehouse.com/policies/shipping-policy
Before ordering, confirm your inverter's power and battery voltage fall within the recommended range and that its DC terminals accept 3/8 in ring lugs. Plan a cable route of no more than 10 ft each way, and mount the fuse as close to the battery positive terminal as practical.
Review the 16 oz gel format, specifications and application directions.
Check fiberglass, gelcoat and finish suitability before use.
Ask about your surface and stain type before ordering.
Review shipping information and return conditions before purchase.
Installation & Compatibility Guides
The DC-1000-KIT connects an inverter to its battery with sized cables and a 100 A fuse. Check these six points before you buy.
This is a DC cable and fuse kit for an inverter. It is not an inverter or a charger.
The ring lugs fit 3/8 in studs. Confirm your inverter and battery terminals match.
Samlex recommends this kit for inverters of 600–800 W at 12 V.
Each cable is 10 ft. The recommended range assumes a run of that length.
Route cables away from heat, sharp edges and moving parts, and secure them with the supplied clamps.
Two cables, the fuse assembly and hardware are included. Follow the Samlex and inverter manuals.
An installation kit supplies matched cables, a fuse and hardware for one inverter size, so you do not have to source each part separately. A larger inverter or a longer cable run needs heavier cable and a higher-rated fuse, so match the kit to your inverter rather than choosing by price alone.
Compare the DC-2000-KIT (200 A) if your inverter falls in a different size range.
Use these collections to compare electrical and power accessories and related equipment. A collection link is for browsing and does not confirm compatibility.
Browse the available products in this family and compare each item's verified purpose, specifications and package contents.
Review this related shopping category if your project also involves power inverters. Check each item separately for suitability; this link does not establish a compatible pairing.
Return to the parent collection to find a different product family for your maintenance, replacement or upgrade task.
Need Help?
Need help comparing the Samlex DC-1000-KIT, SKU 67213, MPN DC-1000-KIT? Share your inverter model, battery voltage and the cable run length. These details help us answer your selection question before you order.
Trusted by 50,000+ boat owners across the USA
Our team has years of experience in marine parts.
We respond quickly to get you the help you need.
We make sure you get the right part the first time.
Access to 50,000+ marine parts & accessories.
Thanks for subscribing!
This email has been registered!