Customer Service
+1 888 812 6287




Couldn't load pickup availability
RIGID Industries 300515 supplies an Adapt XP light pair with Amber PRO lenses. Mariners Warehouse SKU 98729 includes two fixtures, with one left-side-shooter and one right-side-shooter configuration. Choose the pair for a measured two-light off-road installation that suits its adaptive beam functions, mounting arrangement and complete electrical requirements.
Adapt XP uses an internal GPS module to determine speed for Active View beam adjustment. The current manufacturer describes spot, driving and wider-area optical zones rather than a simple fixed-spot-only function. Amber PRO is the supplied lens configuration, and the manufacturer positions it for dusty or other reduced-visibility off-road conditions; it does not guarantee visibility or safe travel in every condition. Aluminum housings/heatsinks, polycarbonate lenses and a pressure-equalizing vent are listed construction features.
Confirm the left/right fixture positions, bracket clearance, cable routes and exact setup procedure before final mounting. The listing specifies 9–36V DC, flying/open leads and a wiring harness sold separately. Follow the supplied instructions for the magnetic reed power clips, power management and adaptive operation; their inclusion does not make them a complete wiring kit. Review the actual pair-circuit rating and remaining installation supplies, then operate only under the stated off-road requirements.
Review one pair of RIGID 300515 Adapt XP Amber PRO lights and the confirmed configuration before ordering. Check the shipping options and delivery estimate shown for your destination at checkout.
Plan two mounting locations with the specified left/right side-shooter arrangement. Confirm the exact delivered harness requirements, power marking, bracket geometry and cable routes. Inspect both lights, listed clips and mounting components and obtain the appropriate separate wiring equipment before installation.
Read the shipping policy or contact Mariners Warehouse with product and destination questions.
Review the 16 oz gel format, specifications and application directions.
Check fiberglass, gelcoat and finish suitability before use.
Ask about your surface and stain type before ordering.
Review shipping information and return conditions before purchase.
Installation & Compatibility Guides
Check 300515 by its actual fixture, kit or accessory role. Compare mounting space, electrical requirements, control generation and confirmed package contents before installation.
300515 includes two Amber PRO Adapt XP fixtures, one with a left side-shooter and one with a right side-shooter. Do not transfer the single-pod version’s side-shooter arrangement.
The light input specification is 9–36V DC. Confirm actual per-fixture and complete pair load from the delivered documentation and choose the exact approved harness and circuit arrangement.
Use the actual fixture and bracket drawings for support points, rear clearance, cable routing and aiming. Confirm the required left/right installation arrangement under the exact instructions.
The internal GPS module supplies speed information for Active View beam adjustment. Follow the actual startup, clip and control instructions; do not invent speed thresholds or substitute an unrelated RGB controller.
Amber PRO is the supplied lens configuration, not a visibility guarantee. The listing specifies off-road use only; install and operate within the exact fixture and connection exposure limits.
The lights, magnetic reed power clips and listed mounting items are supplied. The harness is sold separately. Confirm actual covers, leads and kit contents before ordering remaining components.
RIGID 300515 supplies two Amber PRO Adapt XP lights with GPS-speed-responsive beam adjustment and paired left/right side-shooter configurations. RIGID 544313 supplies one Q-Series PRO light with a fixed Driving optic and a listed 195W rating. Their optical control, fixture quantity and mounting systems differ.
Choose the adaptive pair when its documented controls, amber configuration and two mounting locations suit the project. Choose a fixed optic only after comparing the target area and support requirements. Account for the Adapt XP pair’s separate wiring-harness purchase rather than assuming the Q-Series package transfers to it. Review the RIGID Industries Q-Series Pro Driving MPN - 544313 as a separately sold option.
Choose the product family by the actual fixture, control or accessory task, then check each exact item separately.
Compare each item’s actual lighting or accessory role, mounting, power, controls and package quantity.
Review light bars when the project calls for a bar format. Check each model’s optic, mounting span, circuit and supplied equipment.
Return to the parent collection for another maintenance, replacement or upgrade task. Select each item by its own documented requirements.
Need Help?
Need help comparing RIGID Industries Adapt XP Amber PRO Lens Light Pair, SKU 98729, MPN 300515? Share your two mounting locations, left/right fixture arrangement, supply voltage, delivered pair electrical markings and proposed wiring harness. These details help us understand your selection question before you order.
Trusted by 50,000+ boat owners across the USA
Our team has years of experience in marine parts.
We respond quickly to get you the help you need.
We make sure you get the right part the first time.
Access to 50,000+ marine parts & accessories.
Thanks for subscribing!
This email has been registered!