Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Get Black Friday Prices Early – Up to 20% Off Today
Customer Service
+1 888 812 6287


Couldn't load pickup availability
Foulfree Transducer Coating
Formulated by industry-leading scientists and certified by Airmar for transducers.
Fouling on the face of transducers can reduce their sensitivity, bottom-echo returns and positive fish targets. It can also increase the turbulence over the face of the transducer causing aeration and loss of bottom contact. Foulfree keeps transducers clean and operating at the top of their game for the clearest sonar images possible.
The proprietary clear coat forms a slick surface that marine growth can’t grab onto, keeping your transducer surface clean and clear.
Features:
Technical Specifications:
In the Box:
Before the Propspeed Foulfree Transducer Coating Kit (FFKIT) is released for shipment, confirm the exact kit size, manufacturer part number, delivery address and quantity. The order should match the complete measured coating project and the intended component type.
This is the dedicated transducer coating kit. Verify the transducer manufacturer’s instructions and confirm that the total area is within 1 ft² / 0.09 m² before dispatch.
Coating components may be subject to carrier, destination, temperature or hazardous-material handling restrictions. Final shipping method and delivery timing are confirmed during order processing. Keep containers sealed in the original packaging until the application area and schedule are ready.
Inspect the package promptly after delivery. If any container, wipe, applicator or seal is missing or damaged, photograph the unopened package and contact Mariners Warehouse before beginning surface preparation.
Before applying the Propspeed Foulfree Transducer Coating Kit, check the coverage, dedicated transducer preparation system and required drying time to make sure FFKIT matches your marine transducer project.
One Propspeed FFKIT contains 15 ml of Foulfree Clear Coat and is designed to cover up to 1 ft² / 0.1 m² of transducer surface. Confirm the complete area you intend to coat before beginning the application.
The Foulfree Transducer Kit is a purpose-built marine transducer coating system rather than simply another Foulfree Multi-Surface kit size. It combines transducer-specific preparation, conditioning and clear foul-release protection in one application kit.
This foul-release coating for transducers is certified by Airmar for application on its transducers without loss of transducer performance when applied correctly, making product-specific preparation and coating instructions an important part of the installation.
Allow XDprime approximately 10 minutes to dry before applying Foulfree Clear Coat. After coating the transducer, allow a minimum of 8 hours before launching, or at least 24 hours in colder conditions around 40–60°F / 5–13°C.
The Propspeed Foulfree Transducer Coating Kit, MPN FFKIT, is a clear foul-release system developed specifically for marine transducers. Marine growth on the transducer face can affect sensitivity, bottom-echo returns and target detail, so keeping this working surface clean is an important part of maintaining dependable sonar performance.
The Propspeed Foulfree Transducer Coating uses a dedicated three-stage approach: clean with XDclean, condition with XDprime and apply Foulfree Clear Coat. The kit includes 15 ml of Foulfree Clear Coat and provides up to 1 ft² / 0.1 m² of coverage, making it suitable for dedicated transducer applications rather than general underwater-component coating projects.
Dedicated Transducer Formula:FFKIT uses XDclean and XDprime specifically within the Foulfree transducer application system rather than the MSclean and MSprime products used by Foulfree Multi-Surface kits.
Clear Foul-Release Surface:The coating creates a slick, clear working surface designed to help reduce the ability of marine growth to maintain a strong attachment.
Purpose-Built Kit Contents:The abrasive pad, XDclean wipe, XDprime wipe, 15 ml Foulfree Clear Coat and application brush support the complete transducer preparation and coating workflow.
The Propspeed Foulfree Transducer Kit is a dedicated transducer coating system and should not be treated as simply the smallest Foulfree kit. Compare the intended application, preparation system and coating coverage before selecting between FFKIT and the Foulfree Multi-Surface kits.
| Comparison Point | Transducer Kit | Multi-Surface Small | Multi-Surface Medium |
|---|---|
| Product Name | Foulfree for Transducers | Foulfree Multi-Surface Small Kit | Foulfree Multi-Surface Medium Kit |
| Manufacturer Part Number | Transducer: FFKIT | Small: FFKITMS-S | Medium: FFKITMS-M |
| Product Type | Transducer: Dedicated foul-release coating for transducers | Small: Multi-surface foul-release coating kit | Medium: Multi-surface foul-release coating kit |
| Maximum Stated Coverage | Transducer: 1 ft² / 0.1 m² | Small: 5.4 ft² / 0.5 m² | Medium: 21.5 ft² / 2 m² |
| Foulfree Clear Coat | Transducer: 15 ml | Small: 60 ml | Medium: 240 ml |
| Cleaning Product | Transducer: XDclean wipe | Small: 60 ml MSclean | Medium: 240 ml MSclean |
| Primer / Adhesion Product | Transducer: XDprime wipe | Small: 60 ml MSprime | Medium: 240 ml MSprime |
| Primer Dry Time | Transducer: XDprime approximately 10 minutes | Small: MSprime minimum 10 minutes | Medium: MSprime minimum 10 minutes |
| Primary Application | Transducer: Approved marine transducers | Small: Smaller compatible underwater-component projects | Medium: Compatible RIB tubes, stabilizer fins and larger underwater-component projects |
| Included Preparation Tools | Transducer: Abrasive pad, XDclean wipe, XDprime wipe and brush | Small: Removal Pad, Prep Pad and application brushes | Medium: Removal Pad, Prep Pad and application brushes |
| Best Choice When | Transducer: You need a dedicated marine transducer coating system | Small: Your approved multi-surface project requires up to 5.4 ft² of coverage | Medium: Your approved multi-surface project requires up to 21.5 ft² of coverage |
| Important Selection Note | FFKIT uses the dedicated XDclean and XDprime transducer process. FFKITMS-S and FFKITMS-M use the Multi-Surface MSclean and MSprime system and are not simply larger versions of the transducer kit. |
| Shopping Path | Transducer: Current Product | Small: View Foulfree Multi-Surface Small Kit | Medium: View Foulfree Multi-Surface Medium Kit |
Choose Propspeed FFKIT when the project is an approved marine transducer application. Choose the Foulfree Multi-Surface Small or Medium Kit according to the approved underwater component, substrate and measured coating area—not simply by comparing kit volume.
The Propspeed Foulfree Transducer Coating system is specifically designed to help protect marine transducers from fouling while maintaining the working surface required for reliable sonar performance.
Unlike a general-purpose underwater coating, Propspeed FFKIT is built around the requirements of marine transducers. Its XDclean, XDprime and Foulfree Clear Coat components create a dedicated clean, condition and coat application system.
Marine growth on a transducer face can reduce sensitivity, bottom-echo returns and target detail. This foul-release coating for transducers creates a slick surface designed to make it more difficult for fouling to maintain a strong hold.
Foulfree is a biocide-free transducer coating rather than conventional antifouling paint. Its clear foul-release surface relies on physical surface properties to discourage marine growth while keeping the transducer face visible and functional.
The Foulfree Transducer Kit combines an abrasive preparation pad, XDclean wipe, XDprime wipe, 15 ml Foulfree Clear Coat and application brush, giving installers the key components required for the manufacturer-defined transducer coating process.
No product-specific reviews have been published in this workbook for the Propspeed Foulfree Transducer Coating Kit yet. Customers who purchased this exact FFKIT kit can share transducer model, water conditions, application timing and observed performance to help other boat owners.
Applied the Foulfree coating to my transom-mount AIRMAR transducer prior to launching. After months in high-fouling saltwater, the transducer face is completely free of barnacles and tube worms. Most importantly, side-scan and CHIRP readings stayed perfectly crisp with zero signal attenuation.
In our coastal marina, algae and marine growth cover plastics rapidly. The Propspeed Foulfree kit went on easily using the included applicator brush and prep wipes. It created an ultra-slick finish that sheds marine growth as soon as the boat gets up on plane.
The FFKIT package includes everything required for proper surface preparation, including the special XDclean wipe and abrasive pad. The step-by-step instructions made applying the foul-release coating straightforward. Prompt delivery and excellent service from Mariners Warehouse.
Was hesitant to put any coating over a high-end transducer, but knowing Foulfree is certified by Airmar gave me confidence. It does not weaken the transducer signal or frequency accuracy at all, while keeping the face spotless all season long.
Scraping barnacles off an expensive transducer face risks ruining the unit. Propspeed Foulfree solves that problem completely—growth simply cannot stick to the slick clear surface. Haul-out maintenance now takes seconds with a soft cloth.
Need Help?
Send us the exact transducer manufacturer and model, face and housing dimensions, present coating condition and planned launch date. Our marine product team can help identify the compatibility and coverage checks to complete before ordering FFKIT.
Trusted by 50,000+ boat owners across the USA
Our team has years of experience in marine parts.
We respond quickly to get you the help you need.
We make sure you get the right part the first time.
Access to 50,000+ marine parts & accessories.
Thanks for subscribing!
This email has been registered!