PropOne Kit - 1 Litre
PropOne Kit - 1 Litre

PropOne Kit - 1 Litre MPN - 2044

$505.95
$556.55
$505.95

MPN : 2044

SKU: 108370
Availability: In stock
Product type: Boat Outfitting | Propellers,Boat Outfitting | Antifouling Systems
Please hurry! Only 11 left in stock
Subtotal: $505.95
PropOne Kit - 1 Litre

PropOne Kit - 1 Litre MPN - 2044

$556.55 $505.95
PropOne Kit - 1 Litre

PropOne Kit - 1 Litre MPN - 2044

$556.55 $505.95

    PropOne 1 Litre Kit (MPN 2044) is a non-biocidal foul-release coating system for properly prepared ferrous and non-ferrous marine alloys, including aluminum. The two-coat system combines an anti-corrosive primer with a low-surface-energy clear coat that reduces strong marine-growth attachment on propellers and compatible running gear.

    This 1 Litre kit is sized for 2 × 48-inch propellers plus running gear. Correct surface preparation, the 4:1 primer-to-activator mixing ratio, thin primer coverage and the required cure period are essential. Do not apply PropOne to sacrificial anodes or aquaculture equipment.

    Related Products

    Example product title
    $505.95
    $556.55
    $505.95
    Example product title
    $505.95
    $556.55
    $505.95
    Example product title
    $505.95
    $556.55
    $505.95
    Example product title
    $505.95
    $556.55
    $505.95
    Example product title
    $505.95
    $556.55
    $505.95
    Example product title
    $505.95
    $556.55
    $505.95
    Example product title
    $505.95
    $556.55
    $505.95
    Example product title
    $505.95
    $556.55
    $505.95
    Example product title
    $505.95
    $556.55
    $505.95
    Example product title
    $505.95
    $556.55
    $505.95

    Choose the PropOne 1 Litre Kit with Confidence

    Use these four checks to confirm product scope, compatibility and installation requirements before ordering.

    1. 1 Litre Kit

      Matched PropOne coating components for a 1 litre project.

    2. Published Coverage

      2 × 48-inch propellers plus running gear.

    3. Two-Coat System

      Anti-corrosive primer is followed by a non-biocidal foul-release clear coat.

    4. Marine Alloys

      Suitable for properly prepared ferrous and non-ferrous marine alloys, including aluminum.

    PropOne 1 Litre propeller and running gear coating kit shown beside a polished marine propeller, designed to cover up to two 48-inch propellers plus running gear.

    Choose the 1 Litre PropOne Kit for the Correct Coverage

    The PropOne 1 Litre Kit is matched to 2 × 48-inch propellers plus running gear. Select the kit by propeller diameter, blade count and every additional running-gear component that will be coated.

    PropOne performance depends on clean bright metal, correctly mixed primer and an uninterrupted clear-coat application. Measure the complete project before opening the containers.

    Compare PropOne Kit Size and Coverage

    This 1 Litre configuration contains 2 × 240mL Primer Coat, 2 × 60mL Primer Activator and 1 × 400mL Clear Coat. Move to a larger kit when the project includes larger propellers or additional shafts, rudders, struts or trim tabs.

    Selection Point PropOne 1 Litre Kit
    Manufacturer part number 2044
    Kit size 1 Litre
    Published coverage 2 × 48-inch propellers plus running gear
    Primer Coat 2 × 240mL
    Primer Activator 2 × 60mL
    Clear Coat 1 × 400mL

    Compatibility and Application Checks for PropOne 1 Litre Kit

    Confirm the system, surface, coverage and installation conditions below before opening or installing this product.

    1. Prepare Bright Metal

      Remove growth, old coating, oxidation and contamination before coating.

    2. Mix 4:1

      Combine four parts Primer Coat with one part Primer Activator by volume.

    3. Apply Clear Coat

      Apply the clear coat as soon as the primer reaches the specified touch-dry stage.

    4. Complete the Cure

      Keep coated components untouched and out of water for the required curing period.

    PropOne 1 Litre Kit Reviews

    No verified exact-product reviews are included in this import for the PropOne 1 Litre Kit. Keep future customer feedback attached only to this exact product and configuration.

    Excellent foul release coating for propeller and running gear

    Applied the 1 Litre PropOne Kit (MPN 2044) to my twin propellers and shafting. The primer and clear coat went on smoothly according to the instructions. After 4 months in high-fouling saltwater, the running gear remains completely free of barnacles.
    Travis Sterling Verified buyer
    August 2026

    Sufficient volume for larger running gear setup

    The 1 Litre PropOne kit provided plenty of coverage for two large 4-blade props, shafts, and struts. Surface preparation and meticulous etch priming are key, but the foul release performance is superior to standard bottom paint.
    Elliot Vance Verified buyer
    July 2026

    Great packaging and complete coating system

    Everything needed for the application was packaged securely in the kit. The product information clearly outlined coat timing and ambient temperature guidelines. Running gear looks clean and fuel efficiency has improved slightly.
    Garrett Lawson Verified buyer
    June 2026

    Strong slick finish keeps marine growth away

    Applied this kit during seasonal haul-out on an outboard propeller and trim tabs. Following the recat times carefully is essential, but the slick non-toxic finish prevents hard growth from adhering even when docked for extended periods.
    Clinton Ross Verified buyer
    May 2026

    Top-tier propeller protection system

    Fitment guidance and application instructions made the process very manageable. After 6 months in service, marine growth wipes right off with a sponge during routine hull inspections. Highly recommend for underwater metal protection.
    Wayne Bradshaw Verified buyer
    April 2026

    PropOne 1 Litre Kit FAQs

    What does the PropOne 1 Litre Kit cover?
    Published selection guidance lists 2 × 48-inch propellers plus running gear. Actual material demand depends on propeller dimensions, blade count and every additional component included in the project.
    What is included in the 1 Litre PropOne coating set?
    The matched liquid components are 2 × 240mL Primer Coat, 2 × 60mL Primer Activator and 1 × 400mL Clear Coat. Confirm the package contents before preparation.
    Is PropOne a biocidal antifouling paint?
    No. PropOne uses a non-biocidal, low-surface-energy clear coat to reduce strong attachment. Growth removal is a mechanical effect when the coated component moves through the water.
    Which metals can be coated?
    The current technical data sheet lists properly prepared ferrous and non-ferrous marine alloys, including aluminum. Substrate preparation remains essential.
    What is the primer mixing ratio?
    Mix 4 parts Primer Coat with 1 part Primer Activator by volume and follow the current mixing, pot-life and environmental instructions.
    Can PropOne be applied to sacrificial anodes?
    No. Keep PropOne and other coatings off sacrificial anodes.
    How soon can the boat be launched?
    The technical data sheet lists 12 hours at 20°C/68°F and 55% RH or 16 hours at 10°C/50°F and 55% RH. Lower temperature or humidity can extend the required cure time.

    Need Help?

    Need Help Choosing the Right PropOne 1 Litre Kit?

    Send us the number of propellers, diameter, blade count and all shafts, rudders, struts or trim tabs you plan to coat. Our marine product team can help check whether the 1 Litre PropOne kit is correctly sized before ordering.

    Contact Marine Experts Browse All Marine Parts

    Trusted by 50,000+ boat owners across the USA

    A man wearing a navy blue polo shirt with a circular logo sits at a desk holding a metal engine component, with a laptop in front of him and a boat propeller on the table. A dark blue informational overlay on the right lists benefits like 'Talk to an Expert' and 'Find the Right Part'.

    • Expert Marine Support

      Our team has years of experience in marine parts.

    • Fast Response

      We respond quickly to get you the help you need.

    • Find Compatible Parts

      We make sure you get the right part the first time.

    • Huge Selection

      Access to 50,000+ marine parts & accessories.

    Have a Part Number or Engine Model?

    Send it to us and our experts will help you find the exact part you need.

    Recently Viewed Products