500W Three-Speed Propulsion
The Navtech 1 combines a verified 500W output with three selectable speed settings and a published maximum speed of up to 4.35 mph/7 km/h. Actual speed can vary according to the operator’s position, equipment configuration, battery charge and water conditions.
Extended Normal and Continuous Runtime
The removable 21.9V 13Ah lithium-ion battery supports up to 90 minutes of normal intermittent use or up to 40 minutes of continuous operation. The distinction is important when planning charging and use; actual operating time depends on activation pattern, speed setting, load and conditions.
130-Foot Equipment Depth Rating
The Navtech 1 carries a 130 ft/40 m equipment depth rating and is positioned for advanced divers. The rating describes the product limit only. It does not authorize a diver to exceed certification, training, gas-planning, environmental or personal limits.
Included Adjustable Ballast and Fins
Four included ballast weights fit into dedicated adjustment positions, while two included fins attach at the rear. These components allow the unit’s handling and buoyancy configuration to be adjusted according to the manual. Buoyancy must still be checked in the actual water type before every use.
Compatible Action-Camera Mount
The removable mount supports compatible action-camera mounting systems, allowing a suitable camera housing to be attached to the seascooter. The camera, camera housing and attachment screw are not included, and buyers must confirm their mounting interface and required hardware.
Water-Leak Monitoring and Protective Grilles
Protective front and rear grilles enclose the propeller area. A built-in water-leak sensor monitors the unit during operation and warns of detected water intrusion through periodic motor interruption and an audible alert. Stop operating a unit with suspected leakage and follow the service instructions.