F5B-9 Impeller Pump HS Crankshaft
Features:
- Pump Body: Bronze
- Ports: 1-1/4″ Hose
- Cam: Full
- Impeller: Neoprene
- Shaft Seal: Lip Type
- Drive: Crankshaft Pulley Mounted
Manufacturer Part No. : 10-24228-1
UPC Code: 7330717006648
Johnson Pump F5B-9 Impeller Pump HS Crankshaft
$374.25
F5B-9 Impeller Pump HS Crankshaft
Features:
- Pump Body: Bronze
- Ports: 1-1/4″ Hose
- Cam: Full
- Impeller: Neoprene
- Shaft Seal: Lip Type
- Drive: Crankshaft Pulley Mounted
Description
Additional information
| Weight | 4.25 lbs |
|---|
Related products
Jabsco Sealed Macerator Self-Priming Pump 12V
Sealed Macerator
Self-Priming Macerator Pump with Run-Dry Protection
Waste Evacuation
The Jabsco 18590 series DC macerator pump unit is the ideal solution for emptying marine holding tanks when not in a discharge restricted area. Self priming to 5ft this pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutes. Duty cycle of the pump is 15 minutes continuous which means a 180 gallon (680 liter) can be emptied in a single operation
It is recommended that holding tanks be flushed with several gallons of water after each pump out. This will reduce the possibility of a continued build up of sediment in the tank which could cause a potential blockage.
Fish Box and Livewell Tank Evacuation
The Jabsco Macerator Pump is the ideal pump for the emptying of Fish box and livewell receptacles. Very often the livewell tank will be above the waterline of the boat, when this is the case gravity can be used to empty the livewell tank. If not installed in this format then it is beneficial to use the Jabsco macerator pump for evacuation due to its self-priming capabilities and also it's grinding properties.
Fish boxes are typically mounted into the floor of the vessel and are very often below the waterline or only partially above the waterline. Again the Jabsco Macerator pump has the characteristics that lend themselves to this application. The bait residue particles of ice, fish scales and anything else that could potentially be found in the Fish-Box will be easily passed buy the Jabsco Macerator Pump, and the self priming capabilities are perfect for fish box installations common to many of today's sports fishing boats.
Features:
Self-Priming Macerator Pump with Run-Dry Protection
Waste Evacuation
The Jabsco 18590 series DC macerator pump unit is the ideal solution for emptying marine holding tanks when not in a discharge restricted area. Self priming to 5ft this pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutes. Duty cycle of the pump is 15 minutes continuous which means a 180 gallon (680 liter) can be emptied in a single operation
It is recommended that holding tanks be flushed with several gallons of water after each pump out. This will reduce the possibility of a continued build up of sediment in the tank which could cause a potential blockage.
Fish Box and Livewell Tank Evacuation
The Jabsco Macerator Pump is the ideal pump for the emptying of Fish box and livewell receptacles. Very often the livewell tank will be above the waterline of the boat, when this is the case gravity can be used to empty the livewell tank. If not installed in this format then it is beneficial to use the Jabsco macerator pump for evacuation due to its self-priming capabilities and also it's grinding properties.
Fish boxes are typically mounted into the floor of the vessel and are very often below the waterline or only partially above the waterline. Again the Jabsco Macerator pump has the characteristics that lend themselves to this application. The bait residue particles of ice, fish scales and anything else that could potentially be found in the Fish-Box will be easily passed buy the Jabsco Macerator Pump, and the self priming capabilities are perfect for fish box installations common to many of today's sports fishing boats.
Features:
- Impeller: Jabsco Nitrile compound
- Macerator: Stainless Steel Cutter reduces particle size to 1/8" maximum. New 4 blade design
- Seal: Lip Type
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
Jabsco Service Kit f/29090 & 29120 Series
Service Kit
Jabsco's Service Kit includes seal and gaskets.
Compatible Devices:
Jabsco's Service Kit includes seal and gaskets.
Compatible Devices:
- 29090 Series
- 29120 Series
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
Flojet Heavy Duty Deck Wash Pump – 40PSI – 4.3GPM – 12V
Heavy Duty Deck Wash Pump - 40PSI - 4.3GPM - 12V
Self-priming diaphragm pump 12v. Flow rates up to 17 liters/min (4.3 US gallons/min), pressure switch control, capable of pressures up to 2.8bar (40psi)Ideal for cleaning leisure boats, fish boxes, anchor chains, and dinghies. Includes strainer.
Features:
- Self-primes up to 2.4m vertical lift
- Quick-connect plug-in ports for easy installation
- Optional pressure nozzle control to run the pump only as needed
Specifications:
- Voltage: 12 (Vdc)
- Flow Rate: 4.3 US Gallons/Min (17 Liters/Min)
- Pressure Switch Setting: 20psi (1.4 bar) Cut In, 40psi (2.8 bar) Cut Out
- Amp Draw: 6.0 (amp)
- Port Type: 3/4" Hose and 3/4" Thread included
- Strainer: Included
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
Jabsco PAR-Max 4 Bilge/Shower Drain Pump 12V
31705 Bilge and Shower Drain Pump
Bilge/Livewell/General Purpose Diaphragm Pump
Features:
Bilge/Livewell/General Purpose Diaphragm Pump
Features:
- 12v
- Self-Priming from dry up to 2.4m (7.8ft)
- Run dry without damage
- Smooth flow
- Four piston, diaphragm pump
- Powerful heavy duty motor with Thermal Overload Protection
- Snap-in Ports
- Waterproof coating
- Meets USCG Regulation 183.410 and EN ISO 8846 MARINE (Ignition Protection Standards)
- Meets EN 50081-1 Electro-magnetic Compatiblity
- Complies with EN ISO 8849 MARINE Electric Bilge Pump
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
Jabsco 4″ Heavy Duty Flexmount Blower
Heavy Duty Flexmount Blower
AC 250 CFM Flexmount Continuous Duty 4" Blower
Flexmount Blowers are built to the same high specification as the Heavy Duty Flangemount Blowers for use as air intake or extraction systems in engine rooms, fuel compartments, galleys or heads.
AC 250 CFM Flexmount Continuous Duty 4" Blower
Flexmount Blowers are built to the same high specification as the Heavy Duty Flangemount Blowers for use as air intake or extraction systems in engine rooms, fuel compartments, galleys or heads.
- Extended Life Induction Motor
- Tough Reinforced Thermoset Plastic Housing
- Continuous duty motor with thermal overload protection
- Flexmount universal bracket permits outlet to face any direction
- Slip-On Inlet Ducting Connection
- Efficient High Volume Air Flow
- Low-Current Draw
- Corrosion-Resistant Materials Throughout
- 5,000 hr motor life for teh heaviest of applications.
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
Jabsco 1 1/2″ Vented Loop
Vented Loop
Vented loops are anti-siphon safety devices for use with both manual and electric marine toilets installed below the waterline (static or heeled)
Vented loops are anti-siphon safety devices for use with both manual and electric marine toilets installed below the waterline (static or heeled)
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Jabsco 3″ Flexmount Blower – 12V
Flexmount Blower
DC 150 CFM Flexmount 3" Blower
DC 150 CFM Flexmount 3" Blower
- Tough Reinforced Plastic Housing
- Universal flexmount bracket permits outlet to face any direction
- Slip-On Inlet and Outlet Ducting Connection
- Efficient High Volume Air Flow
- Low Current Draw
- Corrosion-Resistant Materials Throughout
- N.M.M.A Type Accepted
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
Jabsco Waste Management System w/Holding Tank & 12V Pump
Waste Management System w/Holding Tank & 12V Pump
Features:
Heavy Duty Macerator Evacuation Pump
Waste Management Control Panel
Features:
- 7.5 Gallon (28 Litres) Capacity
- Evacuation pick-up for included waste pump
- Includes Dock-side pump-out pick-up
- Convenient mounting points
- 1-1/2" (38mm) x 90° Barbed Inlet Port
- 3/4"(19mm) x 90° Barbed Vent Port
- 3" (76mm) Clean-out Access Cover
- Convenient slotted mountin point alcoves
Heavy Duty Macerator Evacuation Pump
- 12 GPM (45 LPM) flow rate
- Integral Run-Dry Protection Device
- Self-priming
- 1"(25mm) Outlet Port
Waste Management Control Panel
- Level Indication in 1/8 increments
- Tank Full flashing indication
- One Touch empty button with automatic shut off when tank is empty
WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
