OnDeck™ Power Cable (2-Pin)
Power your compatible OnDeck™ Hub with this threaded 2-pin power cable.
Manufacturer Part No. : 010-13009-05
UPC Code: 753759256050
Garmin OnDeck™ Power Cable (2-Pin)
$29.99
OnDeck™ Power Cable (2-Pin)
Power your compatible OnDeck™ Hub with this threaded 2-pin power cable.
Description
Additional information
| Weight | 0.7 lbs |
|---|
Related products
Poly-Planar Radio Splash Panel Mount Cover
Radio Splash Cover
The gasket-sealed lid on this splash cover prevents water entry into virtually any marine or spa stereo on the market. Accommodates any dual post, removable and DIN-style stereos.
Contemporary styling makes it an attractive addition to the dashboard or wall. The lid lifts easily and stays open in multiple positions to maintain partial splash protection while allowing access to radio controls.
Features:
- Designed for permanent outdoor mounting
- Waterproof design
- Stainless steel mounting hardware included
Specifications:
- Overall Dimensions: 9 1/16" x 4 3/16" x 1 15/16" (230mm x 106mm x 49mm)
*Sold as an Individual
Boat Leveler Hydraulic Cylinder
Impact resistant, fiberglass reinforced nylon cylinders eliminates expansion and resists ultra-violet rays. Two expanding type seals, plus O-ring, eliminates high and low pressure leaks. Barbed cylinder fitting and an inserted tubular rod prevents hose blow-off and breakage.
Cylinder is 7 1/2 inches eye to eye when closed.
Cylinder is 7 1/2 inches eye to eye when closed.
Boat Leveler Solenoid Valve – Green Wires
Insta-Trim Boat Leveler 12 Volt Solenoid Valve with Green Wire. They are custom designed for Insta-Trim Boat Leveler Co., epoxy sealed and humidity resistant, thereby preventing shorting out. The solenoids lock the tabs in any position, eliminating driftback. Barb type hose fittings provide tight, secure connections.
NavPod PP5051 PowerPod Grand Prix Series Precut f/Raymarine C80 & E80
| PART #: | |
| Description: | PowerPod, Pre-cut for Raymarine 8" C80/E80 |
| W x H x D: | 15.125" x 13" x 10" |
NavPod Protects Your Electronics In Harsh Conditions
PowerPod Grand Prix Series with 20/40 Swivel Base
"PowerPods are simply a better way to mount your Radar/Chartplotter, Fishfinder or GPS. You combine the clean look of flush mounting with the features of a swivel base. Turn the PowerPod to get the best view of your color display. Let your co-pilot enter the waypoints while you steer the boat, then swivel the display back for you to see."
The Latest In Industrial Design
Built to complement the latest marine electronic products.
Double Seal for Watertight Integrity
Outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability over many years.
Polished Stainless Steel TamperProof Fasteners
Large size and strength with new buttonhead style screws that have deep wrench recesses for better tightening power. UV stable polyurethane washers under each fastener improves sealing and holding power of fasteners and long 6 tamperproof wrench provided for easier assembly.
Pre-Cut Models
Includes all of the necessary parts in order to flush mount the unit Comes with a Flush Mount kit which includes a specific gasket and mounting hardware if not supplied by the manufacturer with the unit.
NavPod Protects Your Electronics In Harsh Conditions
Boat Leveler Hydraulic Hose – Sold By The Foot
Designed and manufactured exclusively for Insta-Trim with nylon-reinforced webbing and protective PVC coating. Rated at 2000 lb. burst pressure, 400lb working pressure. Entering the transom 6" above the water line, the hoses are held securely with hose trim. Stainless steel clamps hold the hose to barb fitting at the solenoid.
Furuno Table Top Display Mounting Bracket f/ MU-155C Display
Display Table Top Mounting Bracket with Knobs and Screws
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Boat Leveler 10″ x 8″ Trim Tab Set
10" x 8" Trim Tab Set
Features:
- Wiring - Color-coded wiring in 25' to 40' lengths with quick connects fittings, meets federal standards for heat, pull, and insulation, making installation easy.
- Solenoids - They are custom designed for Insta-Trim Boat Leveler Co., epoxy sealed and humidity resistant, thereby preventing shorting out. The solenoids lock the tabs in any position, eliminating drift back. Barb-type hose fittings provide tight, secure connections.
- Motor - A powerhouse with coated wirings and a thermal overload that resists temperature and amperage build-up. 1 3/4" stack windings and top mounting eliminated oil leakage. The motor is mounted with stainless steel nuts and bolts and is easily disassembled.
- Brackets - Swivel-type brackets allow cylinders to be mounted and adjusted to any angle. Knockout pins act as shear pins it tab strikes an object.
- Pump - Designed and engineered exclusively by Instatrim. The built-in bypass is factory set at 400 P.S.I. tolerance held to .00025. Amperage doesn't exceed 16 because the unit circulates oil, rather than stalling out or trying to pump additional pressure.
- Motor Cover - 4 1/2" D x 6" W x 11"H, high impact ABS plastic cover with a built-in oil reservoir mounts easily with two screws. The filler is located in front. Our cover protects the motor from occasional wash down.
- Cylinders - Impact-resistant, fiberglass-reinforced nylon cylinders eliminate expansion and resist ultra-violet rays. Two expanding type seals, plus O-ring, eliminate high and low-pressure leaks. Barbed cylinder fitting and an inserted tubular rod prevent hose blow-off and breakage. A stainless steel spring retracts the cylinder when the boat is not in motion.
- Trim Tabs - 12 gauge 304 stainless steel trim tabs are available in standard and custom lengths. They are guaranteed against electrolysis, remaining strong and secure. Insta-Trim's hinges prevent most spray and can be used for transom or bottom mounting.
- Hose - Designed and manufactured exclusively for Insta-Trim with nylon-reinforced webbing and protective PVC coating. Rated at 2000 lb. burst pressure, 15' of hose is supplied for your system. Entering the transom 6" above the water line, the hoses are held securely with hose trim. Stainless steel clamps hold the hose to barb fitting at the solenoid.
- Rocker Type Controls - Mounted on the dash they are easy to operate. One pint of Insta-Trim biodegradable transmission oil, funnel and mounting hardware is supplied.
NavPod Stanchion Kit SK135 – For All SailPods & Most SystemPods
Stanchion Kit SK135 - For All SailPods & Most SystemPods
Great for overhead mounting on Powerboats or extending the available dash space on the flybridge. Useful for unique mounting locations in the cockpit on Sailboats.
Includes two 1.25" Stainless Steel tubes with 15° bends pre-drilled for mounting 9.5" or 12" SailPods or SystemPods on a flat surface (does not fit GP1500/GP2500 Series or GP1600/GP2600 Series SystemPods).
Stanchion Kit includes:
Great for overhead mounting on Powerboats or extending the available dash space on the flybridge. Useful for unique mounting locations in the cockpit on Sailboats.
Includes two 1.25" Stainless Steel tubes with 15° bends pre-drilled for mounting 9.5" or 12" SailPods or SystemPods on a flat surface (does not fit GP1500/GP2500 Series or GP1600/GP2600 Series SystemPods).
Stanchion Kit includes:
- 1.25" diameter 316 stainless steel
- Mirror polished finish
- Pre-drilled mounting and wire access holes
- Stainless steel feet can be removed for adjusting the height
