Showing all 10 results

Jabsco Ballast King Bronze DC Pump w/o Switch – 15 GPM

$439.99

Ballast King Bronze DC Pump without Switch - 15 GPM

Wakeboard and Ski Boat Ballast Pump

Features:

  • Flow rate: 15 US gallons/min (57 Litres/min)
  • Self-priming from dry up to 1.2m (4ft)
  • Adds approx 125lbs (56kgs) of ballast per minute
  • Reversible to both fill and empty tanks
  • Simple design means fewer wearing parts.
  • ISO 8846 MARINE (Ignition protection).

Applications:

The Ballast King is designed to pump water into Wakeboard Liquid Ballast Tanks and when reversed will also pump water out of them. It has a flow rate of 15 gallons per minute, so it can fill most ballast tanks in about five minutes. It is equipped with a Run-Dry Protection Device (patent pending) to automatically shut-off the pump and protect the impeller from run-dry damage should the pump be mistakenly left on after the Ballast Tank is empty.

 Specifications:

  • Body Materials: Bronze
  • Impeller: Jabsco Neoprene compound
  • Seal: Lip Type
  • Port(s): 1/2" Internal Pipe Threads 1" External Hose Barb 
  • Voltage: 12 (Vdc)
  • Amp Draw: 19 (amp)
  • Fuse Size: 25 (amp)
  • Motor Type: Equipped with Run-Dry Protection Device (Patent Pending) Permanent Magnet Type Fully Enclosed Stainless Steel Shaft Ball Type Shaft Bearing Reversible 
  • Duty Cycle: 30 Minutes Max
  • Dimensions: 3 5/8 x 8 x 4 3/4 (inches)

WarningWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Jabsco Ballast King Bronze DC Pump w/Reversing Switch – 15 GPM

$489.99

Ballast King Bronze DC Pump with Reversing Switch - 15 GPM

Wakeboard and Ski Boat Ballast Pump

Features:

  • Flow rate: 15 US gallons/min (57 Litres/min)
  • Self-priming from dry up to 1.2m (4ft)
  • Adds approx 125lbs (56kgs) of ballast per minute
  • Reversible to both fill and empty tanks
  • Simple design means fewer wearing parts.
  • ISO 8846 MARINE (Ignition protection).

Applications:

The Ballast King is designed to pump water into Wakeboard Liquid Ballast Tanks and when reversed will also pump water out of them. It has a flow rate of 15 gallons per minute, so it can fill most ballast tanks in about five minutes. It is equipped with a Run-Dry Protection Device (patent pending) to automatically shut-off the pump and protect the impeller from run-dry damage should the pump be mistakenly left on after the Ballast Tank is empty.

 Specifications:

  • Body Materials: Bronze
  • Impeller: Jabsco Neoprene compound
  • Seal: Lip Type
  • Port(s): 1/2" Internal Pipe Threads 1" External Hose Barb 
  • Voltage: 12 (Vdc)
  • Amp Draw: 19 (amp)
  • Fuse Size: 25 (amp)
  • Motor Type: Equipped with Run-Dry Protection Device (Patent Pending) Permanent Magnet Type Fully Enclosed Stainless Steel Shaft Ball Type Shaft Bearing Reversible 
  • Duty Cycle: 30 Minutes Max
  • Dimensions: 3 5/8 x 8 x 4 3/4 (inches)

WarningWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Jabsco Ballast King Bronze DC Pump with Deutsch Connector – No Reversing Switch – 15 GPM

$449.99

Ballast King Bronze DC Pump with Deutsch Connector - No Reversing Switch - 15 GPM 

Wakeboard and Ski Boat Ballast Pump

Features:

  • Flow rate: 15 US gallons/min (57 Litres/min)
  • Self-priming from dry up to 1.2m (4ft)
  • Adds approx 125lbs (56kgs) of ballast per minute
  • Reversible to both fill and empty tanks
  • Simple design means fewer wearing parts
  • ISO 8846 MARINE (Ignition protection)

Applications:

The Ballast King is designed to pump water into Wakeboard Liquid Ballast Tanks and when reversed will also pump water out of them. It has a flow rate of 15 gallons per minute, so it can fill most ballast tanks in about five minutes. It is equipped with a Run-Dry Protection Device (patent pending) to automatically shut-off the pump and protect the impeller from run-dry damage should the pump be mistakenly left on after the Ballast Tank is empty.

Specifications:

  • Body Materials: Bronze
  • Impeller: Jabsco Neoprene compound
  • Seal: Lip Type
  • Port(s): 1/2" Internal Pipe Threads 1" External Hose Barb 
  • Voltage: 12 (Vdc)
  • Amp Draw: 19 (amp)
  • Fuse Size: 25 (amp)
  • Motor Type: Equipped with Run-Dry Protection Device (Patent Pending) Permanent Magnet Type Fully Enclosed Stainless Steel Shaft Ball Type Shaft Bearing Reversible 
  • Duty Cycle: 30 Minutes Max
  • Dimensions: 3 5/8 x 8 x 4 3/4 (inches)

Jabsco Ballast Pump

$374.99
Ballast Pump

This Wake/Surf boat Ballast pump is the same one utilized by most major boat builders. The Jabsco pump comes standard with a green Run Dry Impeller. This pump has the standard electrical quick connector installed. Just connect your hoses, mount the pump into the boat, in its orginal position, plug the power leads together and your surfing and wakeboarding again.

Impeller # 6303-0007-P - Always Carry a Spare

  • Orignial OEM Ballast Pump Replacement
  • Run Dry Impeller - Green
  • Same electrical connection as Original OEM
  • Same mounting as the OEM unit, no need to drill more holes
  • The leader for Flexible Impeller Ballast Pumps

WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Jabsco Mastercraft Ballast Pump – 12V

$399.99

Mastercraft Ballast Pump - 12V

The Jabsco Wake/Surf boat Ballast pump is the direct replacement for Mastercraft part number 300249. The Jabsco pump comes standard with a green Run Dry Impeller and has the standard electrical quick connector already installed. Just connect your hoses, mount the pump in the boat, plug the power leads together and your surfing and wakeboarding again.

Features:

  • Same electrical connection as original OEM
  • Same mounting as the OEM unit, no need to drill more holes
  • The leader for flexible Impeller Ballast Pumps

WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Jabsco Wakeboard Ballast Puppy w/Reversing Switch – 12V

$444.99
Ballast Pump

Today's Wakeboard and Ski tow boats need to be able to take on water ballast to modify their wake formation. A development of our tried and tested Puppy Pumps lets these specialist craft rapidly take on and dump ballast, while modern electronics guard against dry running damage to the impeller

The choice of motor boat builders for ski and wakeboard ballast systems.

  • Includes Run-Dry Protection Device
  • 9 GPM (34 LPM) flow rate
  • Approximately 80 pounds of water ballast per minute
  • Self-priming to 3'
  • Reversible pump both fills and empties ballast tanks
  • Reversing switch
  • Ignition protected

Ports
  • 1" (25mm) hose barb external
  • 1/2" NPT internal

WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Johnson Pump F38B-19 Multi-Use Utility Pump – 9.0GPM – 12V

$281.62
F38B-19 - Capacity 35 l/min

Perfect for bilge pumping, deckwash, water circulation, oiland diesel refuelling at dockside service, etc.

Description F38B-19, 12V
Body Bronze
Impeller 09-824P-9
Seal Lip seal
Connection Hose 1" / +" NPT
Length 180 mm - 7"
Width 120 mm - 4.72"
Height 90 mm - 3.54"
Weight 3 kg - 6.6 lbs

Johnson Pump F3B-19 Multi-Purpose Utility Pump – 5.5GPM – 12V

$270.72
F3B-19 - Capacity 21 l/min

Perfect for bilge pumping, deckwash, water circulation, oil
and diesel refuelling at dockside service, etc.

Description F3B-19, 12V
Body Bronze
Impeller 09-843S-9
Seal Lip seal
Connection 3/8" NPT
Length 170 mm - 6.7"
Width 113 mm - 4.4"
Height 82 mm - 3.22"
Weight 2 kg - 4.5 lbs

Johnson Pump F5B-1907 Impeller Pump – 12V – 3/4″ NPT

$790.34

F5B-1907 Impeller Pump - 12V - 3/4" NPT

For bilge pumping, deckwash, water circulation, oil and diesel refuelling at dockside service, etc.

Features:

  • Body: Bronze
  • Impeller: 09-1027B-9
  • Seal: Mechanical Seal
  • Connection: 3/4" NPT
  • Length: 10.15"
  • Width: 5.15"
  • Height: 4.72"
  • Weight: 17.5lbs

Shurflo by Pentair Marine Air Conditioning Self-Priming Circulation Pump – 115VAC, 4.5GPM, 50PSI Bypass, Run-Dry Capable EDM Valves

$634.08
Marine Air Conditioning Self-Priming Circulation Pump - 115VAC, 4.5GPM, 50PSI Bypass, Run-Dry Capable EDM Valves Shurflo will keep your air conditioning running. Air locking often occurs when you lower your boat into the water. Pentair Shurflo Self-priming Circulation Pumps help prevent air locking and keep your air conditioning system up and running. Compatible with all types of boats that are trailerable or not constantly in the water.