Showing 1–12 of 70 results

BEP Contour Matrix Gas Detector w/Control

$419.99

Contour Matrix Gas Detector with Control

The Contour Matrix Gas Detectors are the product of continuing research and development which BEP Marine Ltd devotes to their product range. The BEP Detectors use microprocessor control to ensure correct sensor sensitivity. The Detectors have the capability to control two sensors that detect both LPG and Petrol, with visual and audible alarms. There is a test switch to check the operation of sensors with indicators for fault detection. 600-GDL Gas Detector has the same features as the 600-GD, with the additional ability to switch a valve on and off. The 600-GDL has a "pulse and hold" feature which allows the solenoid valve to be opened, using full power, and then reducing power to hold the valve in the open position. This reduces power consumption and heat generated whilst the valve is in the on position.

Features:

  • Operating Voltage 10 to 32 Volts DC
  • Self-testing capability
  • Microprocessor control
  • Provision for external alarm
  • Automatic shut-off solenoid control with pulse and hold circuit for low power draw (600-GDL only)
  • Provision for bilge blower
  • Dual sensor capability
  • For remote alarm operation use part no. 54-27C4

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Fireboy-Xintex 8 Circuit Engine Shutdown w/Time Delay – Round Display

$765.00

8 Circuit Engine Shutdown with Time Delay - Round Display

Features:

  • Required for Diesel Engines

Each engine shutdown display unit comes with:

  • Integrated alarm horn
  • Charged/discharged lights
  • Override switch for restart or control of auto-shutdown
  • Additional units and wire harnesses are available for a second station

Fireboy-Xintex Auxiliary Relay

$38.00
Auxiliary Relay

30 Amp, single pole double throw relay for extra heavy loads.

For use with the following fume detectors:
  • MB-1-R
  • S-2A

Fireboy-Xintex CO Alarm 12/24V DC – Black

$175.00

CO Alarm 12/24V DC - Black

A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.

The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream. 

The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.

*Long sensor life – approximately 7 year end-of-life (EOL)

Features:

  • Microprocessor controlled
  • Compact design for inconspicuous protection
  • Time-weighted average CO measurement process constantly monitors all CO levels
  • Highly resistant to most chemicals, solvents & cleaners
  • CMD6-MD 12/24V DC model uses boat power and has permanent internal backup Lithium-metal batteries

Technical Specifications:

  • Power Usage - 4 mA
  • Alarm Point - 10% COHb
  • Alarm Horn - 85 dBA
  • Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm)
  • Interconnect Functionality - No

*Sold as an Individual 

Fireboy-Xintex CO Alarm 12/24V DC – White

$175.00

CO Alarm 12/24V DC - White

A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.

The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream. 

The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.

*Long sensor life – approximately 7 year end-of-life (EOL)

Features:

  • Microprocessor controlled
  • Compact design for inconspicuous protection
  • Time-weighted average CO measurement process constantly monitors all CO levels
  • Highly resistant to most chemicals, solvents & cleaners
  • CMD6-MD 12/24V DC model uses boat power and has permanent internal backup Lithium-metal batteries

Technical Specifications:

  • Power Usage - 4 mA
  • Alarm Point - 10% COHb
  • Alarm Horn - 85 dBA
  • Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm)
  • Interconnect Functionality - No

*Sold as an Individual 

Fireboy-Xintex CO Alarm 12/24V DC w/Interconnect – Black

$185.00

CO Alarm 12/24V DC with Interconnect - Black  

A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.

The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream. 

The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.

*Long sensor life – approximately 7 year end-of-life (EOL)

Features:

  • Interconnect up to ten (10) CO alarms - all connected CO alarms sound together 
  • Microprocessor controlled
  • Compact design for inconspicuous protection
  • Time-weighted average CO measurement process constantly monitors all CO levels
  • Highly resistant to most chemicals, solvents & cleaners
  • CMD6-MD 12/24V DC model uses boat power and has permanent internal backup Lithium-metal batteries

Technical Specifications:

  • Power Usage - 4 mA
  • Alarm Point - 10% COHb
  • Alarm Horn - 85 dBA
  • Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm)
  • Interconnect Functionality - Yes

*Sold as an Individual 

Fireboy-Xintex CO Alarm 12/24V DC w/Interconnect – White

$185.00

CO Alarm 12/24V DC with Interconnect - Black  

A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.

The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream. 

The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.

*Long sensor life – approximately 7 year end-of-life (EOL)

Features:

  • Interconnect up to ten (10) CO alarms - all connected CO alarms sound together 
  • Microprocessor controlled
  • Compact design for inconspicuous protection
  • Time-weighted average CO measurement process constantly monitors all CO levels
  • Highly resistant to most chemicals, solvents & cleaners
  • CMD6-MD 12/24V DC model uses boat power and has permanent internal backup Lithium-metal batteries

Technical Specifications:

  • Power Usage - 4 mA
  • Alarm Point - 10% COHb
  • Alarm Horn - 85 dBA
  • Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm)
  • Interconnect Functionality - Yes

*Sold as an Individual 

Fireboy-Xintex CO Alarm Internal Battery – Black

$175.00

CO Alarm Internal Battery - Black

A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.

The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream. 

The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.

*Long sensor life – approximately 7 year end-of-life (EOL)

Features:

  • Microprocessor controlled
  • Compact design for inconspicuous protection
  • Time-weighted average CO measurement process constantly monitors all CO levels
  • Highly resistant to most chemicals, solvents & cleaners
  • CMD6-MD Internal battery model uses included maintenance-free lithium-metal batteries.  No wiring and reduced labor and material costs to install.  

Technical Specifications:

  • Power Usage - None
  • Alarm Point - 10% COHb
  • Alarm Horn - 85 dBA
  • Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm)
  • Interconnect Functionality - No

*Sold as an Individual 

Fireboy-Xintex CO Alarm Internal Battery – White

$175.00

CO Alarm Internal Battery - White

A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.

The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream. 

The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.

*Long sensor life – approximately 7 year end-of-life (EOL)

Features:

  • Microprocessor controlled
  • Compact design for inconspicuous protection
  • Time-weighted average CO measurement process constantly monitors all CO levels
  • Highly resistant to most chemicals, solvents & cleaners
  • CMD6-MD Internal battery model uses included maintenance-free lithium-metal batteries.  No wiring and reduced labor and material costs to install.  

Technical Specifications:

  • Power Usage - None
  • Alarm Point - 10% COHb
  • Alarm Horn - 85 dBA
  • Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm)
  • Interconnect Functionality - No

*Sold as an Individual 

Fireboy-Xintex CO Alarm Internal Battery w/Interconnect – Black

$185.00

CO Alarm Internal Battery w/Interconnect - Black

A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.

The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream. 

The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.

*Long sensor life – approximately 7 year end-of-life (EOL)

Features:

  • Interconnect up to ten (10) CO alarms - all connected CO alarms sound together 
  • Microprocessor controlled
  • Compact design for inconspicuous protection
  • Time-weighted average CO measurement process constantly monitors all CO levels
  • Highly resistant to most chemicals, solvents & cleaners
  • CMD6-MD Internal battery model uses included maintenance-free lithium-metal batteries.  No wiring and reduced labor and material costs to install.  

Technical Specifications:

  • Power Usage - None
  • Alarm Point - 10% COHb
  • Alarm Horn - 85 dBA
  • Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm)
  • Interconnect Functionality - Yes

*Sold as an Individual 

Fireboy-Xintex CO Alarm Internal Battery w/Interconnect – White

$185.00

CO Alarm Internal Battery w/Interconnect - White

A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.

The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream. 

The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.

*Long sensor life – approximately 7 year end-of-life (EOL)

Features:

  • Interconnect up to ten (10) CO alarms - all connected CO alarms sound together 
  • Microprocessor controlled
  • Compact design for inconspicuous protection
  • Time-weighted average CO measurement process constantly monitors all CO levels
  • Highly resistant to most chemicals, solvents & cleaners
  • CMD6-MD Internal battery model uses included maintenance-free lithium-metal batteries.  No wiring and reduced labor and material costs to install.  

Technical Specifications:

  • Power Usage - None
  • Alarm Point - 10% COHb
  • Alarm Horn - 85 dBA
  • Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm)
  • Interconnect Functionality - Yes

*Sold as an Individual 

Fireboy-Xintex Deluxe Helm Display w/Gauge Body, LED & Color Graphics f/Engine Shutdown System – Black Bezel Display

$175.00
Deluxe Helm Display w/Gauge Body, LED & Color Graphics f/Engine Shutdown System - Black Bezel Display

Features/Specifications:
  • Compact Design
  • 2-3/16" Round Black Bezel
  • Simple Installation
  • 9-30VDC
  • Operating Temperature: -40°F to 185°F (-40°C to 85°C)
  • Reverse Polarity Protected