{"title":"Trident Marine Fuel Hoses","description":"\u003cp\u003eTrident marine fuel and vent hoses for compatible inboard and outboard installations.\u003c\/p\u003e","products":[{"product_id":"trident-marine-3-8-x-50-boxed-low-permeation-type-a1-15-fuel-line-hose-black-98796","title":"Trident Marine 3\/8\" x 50' Boxed Low Permeation Type A1-15 Fuel Line Hose - Black MPN - 365-0386","description":"\u003cp\u003e\u003cstrong\u003e3\/8\" x 50' Boxed Low Permeation Type A1-15 Fuel Line Hose - Black\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTrident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation, and a unique \"Barrier Liner\" on the inside surface of the tube, so fuel is not in direct contact with rubber.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone \u003c\/li\u003e\n\u003cli\u003eAlso provides excellent bend-ability\u003c\/li\u003e\n\u003cli\u003eNMMA Type Accepted \u0026amp; CE certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose (distribution, return, vent and transfer)\u003c\/li\u003e\n\u003cli\u003eFor all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube: Nylon Internal Barrier, NBR \u003c\/li\u003e\n\u003cli\u003eCover: NBR\/PVC Blend \u003c\/li\u003e\n\u003cli\u003eReinforcement: Polyester 2 spiral \u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-28ºC to 100ºC) \u003c\/li\u003e\n\u003cli\u003eLength: 50 ft. (15 m) Boxed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 3\/8\" \/ (mm) 9.50\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 0.681 \/ (mm) 17.3\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: (psi) 400 \/ (mpa) 2.76\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 100 \/ (mpa) 0.69\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 2\" \/ (mm) 50.8\u003c\/li\u003e\n\u003cli\u003eWeight: (lb\/100 ft.) 15.6 \/ (kg\/m) 0.233\u003c\/li\u003e\n\u003cli\u003ePermeation Rate: \u0026lt;10 (Standard is 10g\/m2\/24 hrs (CE10)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #365 series exceeds ABYC H-24 \u0026amp; H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10\u003c\/p\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46387354206370,"sku":"98796","price":217.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/98796XL.jpg?v=1765338585"},{"product_id":"trident-marine-5-16-x-50-boxed-low-permeation-type-a1-15-fuel-line-hose-black-98797","title":"Trident Marine 5\/16\" x 50' Boxed Low Permeation Type A1-15 Fuel Line Hose - Black MPN - 365-0566","description":"\u003cp\u003e\u003cstrong\u003e5\/16\" x 50' Boxed Low Permeation Type A1-15 Fuel Line Hose - Black\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTrident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation and a unique \"Barrier Liner\" on the inside surface of the tube, so fuel is not in direct contact with rubber.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone \u003c\/li\u003e\n\u003cli\u003eAlso provides excellent bend-ability\u003c\/li\u003e\n\u003cli\u003eNMMA Type Accepted \u0026amp; CE certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose (distribution, return, vent and transfer)\u003c\/li\u003e\n\u003cli\u003eFor all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube: Nylon Internal Barrier, NBR \u003c\/li\u003e\n\u003cli\u003eCover: NBR\/PVC Blend \u003c\/li\u003e\n\u003cli\u003eReinforcement: Polyester 2 spiral \u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-28ºC to 100ºC) \u003c\/li\u003e\n\u003cli\u003eLength: 50 ft. (15 m) Boxed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 5\/16\" \/ (mm) 7.92\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 0.611 \/ (mm) 15.5\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: (psi) 400 \/ (mpa) 2.76\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 100 \/ (mpa) 0.69\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 1.75\" \/ (mm) 44.5\u003c\/li\u003e\n\u003cli\u003eWeight: (lb\/100 ft.) 13.3 \/ (kg\/m) 0.198\u003c\/li\u003e\n\u003cli\u003ePermeation Rate: \u0026lt;10 (Standard is 10g\/m2\/24 hrs (CE10)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #365 series exceeds ABYC H-24 \u0026amp; H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10\u003c\/p\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46387354239138,"sku":"98797","price":217.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/98797XL.jpg?v=1765338585"},{"product_id":"trident-marine-3-8-x-50-boxed-barrier-lined-b1-15-epa-compliant-outboard-fuel-line-hose-gray-98799","title":"Trident Marine 3\/8\" x 50' Boxed Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray MPN - 305-0386","description":"\u003cp\u003e\u003cstrong\u003e3\/8\" x 50' Boxed Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis hose is built with the best fuel and age-resistant formulations and a unique \"Barrier Liner\" on the inside surface of the tube, so the fuel is not in direct contact with rubber. This greatly reduces fuel permeation and prevents ethanol degradation of the rubber tube, which can cause small pieces of rubber to reach and damage the engine. That is particularly important considering the prospect of higher ethanol blends (E-15) available at gas stations next year. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e: \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides extraordinary resistance to fuel permeation, aging, heat, cold, and ozone  \u003c\/li\u003e\n\u003cli\u003eAlso, provides excellent rope-like bend-ability and fitting retention\u003c\/li\u003e\n\u003cli\u003eFor both gasoline (including ethanol blends up to E85) and diesel (including bio diesel blends up to 100%)\u003c\/li\u003e\n\u003cli\u003eEPA Certified and CARB Executive Order for low permeation Type B1-15\u003c\/li\u003e\n\u003cli\u003eNMMA Type Accepted \u0026amp; CE certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose for distribution, return, vent and transfer\u003c\/li\u003e\n\u003cli\u003eFor all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube: Fluoroplastic Internal Barrier\u003c\/li\u003e\n\u003cli\u003eCover: Gray CPE Rubber\u003c\/li\u003e\n\u003cli\u003eReinforcement: 2-Spiral Polyester \u003cspan style=\"background-color: initial;\"\u003ePlies \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"background-color: initial;\"\u003eTemperature\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e Range: \u003c\/span\u003e-20°F to 212°F (-28ºC to 100ºC)\u003c\/li\u003e\n\u003cli\u003eLength: 50’ (15m) Boxed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 3\/8\" \/ (mm) 9.50\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 0.588 \/ (mm) 14.9\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: (psi) 175 \/ (mpa) 1.21\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 35 \/ (mpa) 0.24\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 4\" \/ (mm) 101.6\u003c\/li\u003e\n\u003cli\u003eWeight: (lb\/100 ft.) 10.5 \/ (kg\/m) 0.156\u003c\/li\u003e\n\u003cli\u003ePermeation Rate (Standard is (15g\/m^2\/24hrs (CE10)): 5.0\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #305 series exceeds ABYC H-24, SAE J1527, ISO 8469 B1, USCG Type B1-15\u003c\/p\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46387354534050,"sku":"98799","price":202.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/98799XL.jpg?v=1765338587"},{"product_id":"trident-marine-5-8-x-50-boxed-type-a2-fuel-vent-line-hose-black-98798","title":"Trident Marine 5\/8\" x 50' Boxed Type A2 Fuel \u0026 Vent Line Hose - Black MPN - 317-0586","description":"\u003cp\u003e\u003cstrong\u003e5\/8\" x 50' Boxed Type A2 Fuel \u0026amp; Vent Line Hose - Black\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTrident 5\/8” A2 Fuel Hose for gasoline vent hose (including ethanol blends) and diesel (including bio diesel blends). This hose is built with the best fuel, fire and age resistant formulation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides extraordinary resistance to aging, fire, heat, cold, and the ozone \u003c\/li\u003e\n\u003cli\u003eAlso provides excellent bend-ability\u003c\/li\u003e\n\u003cli\u003eNMMA Type Accepted \u0026amp; CE certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFuel Hose for vent and diesel distribution \u003c\/li\u003e\n\u003cli\u003eFor all marine fuels including gasoline, alcohol blends, diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube: Nylon Internal Barrier, NBR \u003c\/li\u003e\n\u003cli\u003eCover: NBR\/PVC Blend \u003c\/li\u003e\n\u003cli\u003eReinforcement: Polyester 2 spiral \u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-28ºC to 100ºC) \u003c\/li\u003e\n\u003cli\u003eLength: 50 ft. (15 m) Boxed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 5\/8\" \/ (mm) 15.9\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 0.960 \/ (mm) 24.4\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: (psi) 200 \/ (mpa) 1.38\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 50 \/ (mpa) 0.34\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 3\" \/ (mm) 76.2\u003c\/li\u003e\n\u003cli\u003eWeight: (lb\/100 ft.) 25.84 \/ (kg\/m) 11.72\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #317 series exceeds ABYC H-24 \u0026amp; H-33, SAE J1527, ISO 7840, \u0026amp; USCG Type A2\u003c\/p\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46387354501282,"sku":"98798","price":266.33,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/98798XL.jpg?v=1765338587"},{"product_id":"trident-marine-5-16-x-50-boxed-barrier-lined-b1-15-epa-compliant-outboard-fuel-line-hose-gray-98800","title":"Trident Marine 5\/16\" x 50' Boxed Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray MPN - 305-0566","description":"\u003cp\u003e\u003cstrong\u003e5\/16\" x 50' Boxed Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis hose is built with the best fuel and age-resistant formulations and a unique \"Barrier Liner\" on the inside surface of the tube, so fuel is not in direct contact with rubber. This greatly reduces fuel permeation and prevents ethanol degradation of the rubber tube, which can cause small pieces of rubber to reach and damage the engine. That is particularly important considering the prospect of higher ethanol blends (E-15) available at gas stations next year. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides extraordinary resistance to fuel permeation, aging, heat, cold, and ozone  \u003c\/li\u003e\n\u003cli\u003eAlso, provides excellent rope-like bend-ability and fitting retention\u003c\/li\u003e\n\u003cli\u003eFor both gasoline (including ethanol blends up to E85) and diesel (including bio diesel blends up to 100%)\u003c\/li\u003e\n\u003cli\u003eEPA Certified and CARB Executive Order for low permeation Type B1-15\u003c\/li\u003e\n\u003cli\u003eNMMA Type Accepted \u0026amp; CE certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose for distribution, return, vent and transfer\u003c\/li\u003e\n\u003cli\u003eFor all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube: Fluoroplastic Internal Barrier\u003c\/li\u003e\n\u003cli\u003eCover: Gray CPE Rubber\u003c\/li\u003e\n\u003cli\u003eReinforcement: 2-Spiral Polyester Plies \u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-28ºC to 100ºC)\u003c\/li\u003e\n\u003cli\u003eLength: 50’ (15m) Boxed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 5\/16\" \/ (mm) 7.92\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 0.500 \/ (mm) 12.7\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: (psi) 175 \/ (mpa) 1.21\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 35 \/ (mpa) 0.24\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 2.5\" \/ (mm) 63.5\u003c\/li\u003e\n\u003cli\u003eWeight: (lb\/100 ft.) 7.8 \/ (kg\/m) 0.116\u003c\/li\u003e\n\u003cli\u003ePermeation Rate (Standard is (15g\/m^2\/24hrs (CE10)): 5.0\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #305 series exceeds ABYC H-24, SAE J1527, ISO 8469 B1, USCG Type B1-15\u003c\/p\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46387354763426,"sku":"98800","price":185.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/98800XL.jpg?v=1765338590"},{"product_id":"trident-marine-5-8-a2-fuel-vent-line-hose-black-sold-by-the-foot-98942","title":"Trident Marine 5\/8” A2 Fuel \u0026 Vent Line Hose - Black - Sold by the Foot MPN - 317-0580-FT","description":"\u003cp\u003e\u003cstrong\u003e5\/8” A2 Fuel \u0026amp; Vent Line Hose - Black - Sold by the Foot\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTrident 5\/8” ID A2 Fuel Hose is a gasoline vent hose (including ethanol blends) and diesel (including bio diesel blends). \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold by the foot \u003c\/li\u003e\n\u003cli\u003eThis hose is built with the best fuel, fire, and age-resistant formulation \u003c\/li\u003e\n\u003cli\u003eProvides extraordinary resistance to aging, fire, heat, cold, and the ozone \u003c\/li\u003e\n\u003cli\u003eAlso, provides excellent bend-ability\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose for vent and diesel distribution \u003c\/li\u003e\n\u003cli\u003eFor all marine fuels including gasoline, alcohol blends, diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube: NBR\u003c\/li\u003e\n\u003cli\u003eCover: NBR\/PVC Blend\u003c\/li\u003e\n\u003cli\u003eReinforcement: Polyester 2 spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"background-color: initial;\"\u003eTemperature\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e Range:\u003cstrong\u003e \u003c\/strong\u003e-20°F to 212°F (-28ºC to 100ºC)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"background-color: initial;\"\u003eLength: Sold by the Foot\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cstrong\u003eSpecifications: \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 0.625\" \/ (mm) 15.9\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 0.960\" \/ (mm) 24.4\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: (psi) 200 \/ (mpa) 1.38\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 50 \/ (mpa) 0.34\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 3\" \/ (mm) 76.2\u003c\/li\u003e\n\u003cli\u003eWeight: (Lb.\/100ft.) 25.84 \/ (Kg\/m) 11.72\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #317 series exceeds ABYC H-24 \u0026amp; H-33, SAE J1527, ISO 7840, \u0026amp; USCG Type A2; and is NMMA Type Accepted \u0026amp; CE certified.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46387362300066,"sku":"98942","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/98942XL.jpg?v=1765338714"},{"product_id":"trident-marine-5-16-a1-15-reel-low-permeation-fuel-line-hose-black-sold-by-the-foot-98943","title":"Trident Marine 5\/16\" A1-15 Reel Low Permeation Fuel Line Hose - Black - Sold by the Foot MPN - 365-0560-FT","description":"\u003cp\u003e\u003cstrong\u003e5\/16\" A1-15 Reel Low Permeation Fuel Line Hose - Black - Sold by the Foot\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTrident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation and a unique \"Barrier Liner\" on the inside surface of the tube, so the fuel is not in direct contact with rubber.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold by the foot\u003c\/li\u003e\n\u003cli\u003eProvides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone \u003c\/li\u003e\n\u003cli\u003eAlso provides excellent bend-ability\u003c\/li\u003e\n\u003cli\u003eNMMA Type Accepted \u0026amp; CE certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose for distribution, return, vent and transfer\u003c\/li\u003e\n\u003cli\u003eFor all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube: Nylon Internal Barrier, NBR \u003c\/li\u003e\n\u003cli\u003eCover: NBR\/PVC Blend \u003c\/li\u003e\n\u003cli\u003eReinforcement: Polyester 2 spiral \u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-28ºC to 100ºC) \u003c\/li\u003e\n\u003cli\u003eLength: 250 ft. reel (sold by the foot)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 5\/16\" \/ (mm) 7.92\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 0.611 \/ (mm) 15.5\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: (psi) 400 \/ (mpa) 2.76\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 100 \/ (mpa) 0.69\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 1.75\" \/ (mm) 44.5\u003c\/li\u003e\n\u003cli\u003eWeight: (lb\/100 ft.) 13.3 \/ (kg\/m) 0.198\u003c\/li\u003e\n\u003cli\u003ePermeation Rate: \u0026lt;10 (Standard is 10g\/m2\/24 hrs (CE10)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #365 series exceeds ABYC H-24 \u0026amp; H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46387362463906,"sku":"98943","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/98943XL.jpg?v=1765338716"},{"product_id":"trident-marine-1-1-2-x-50-coil-type-a2-fuel-fill-hose-98953","title":"Trident Marine 1-1\/2\" x 50' Coil Type A2 Fuel Fill Hose MPN - 327-1126","description":"\u003cp\u003e\u003cstrong\u003e1-1\/2\" x 50' Coil Type A2 Fuel Fill Hose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTrident 1-1\/2\" ID A2 fuel fill hose for gasoline (including ethanol blends) and diesel (including bio diesel blends). \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThis hose is built with the best fuel, fire, and age-resistant formulation \u003c\/li\u003e\n\u003cli\u003eProvides extraordinary resistance to aging, fire, heat, cold, and the ozone \u003c\/li\u003e\n\u003cli\u003eAlso, provides excellent bend-ability\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose for fill and vent plus diesel distribution\u003c\/li\u003e\n\u003cli\u003eApproved, for all marine fuels including gasoline, alcohol blends, diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube \u0026amp; Cover: NBR \/ Neoprene \u003c\/li\u003e\n\u003cli\u003eReinforcement: High tenacity polyester 2 spiral, spring steel helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-20ºC to 100ºC) \u003c\/li\u003e\n\u003cli\u003eLength: 50 ft. (15.24 m) Coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 1\/2\" \/ (mm) 38\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 2 \/ (mm) 51\u003c\/li\u003e\n\u003cli\u003eWall: (inch) 0.25 \/ (mm) 6.4\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 60 \/ (mpa) 0.41\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 5.5\" \/ (mm) 140\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #327 series exceeds ABYC H-24 \u0026amp; H-33, SAE J1527, ISO 7840, \u0026amp; USCG Type A2; and is NMMA Type Accepted, CE certified, and Lloyds Registry Type Approved\u003c\/p\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46387362922658,"sku":"98953","price":779.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/98953XL.jpg?v=1765338724"},{"product_id":"trident-marine-2-x-50-coil-type-a2-fuel-fill-hose-98954","title":"Trident Marine 2\" x 50' Coil Type A2 Fuel Fill Hose MPN - 327-2006","description":"\u003cp\u003e\u003cstrong\u003e2\" x 50' Coil Type A2 Fuel Fill Hose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTrident 2\" ID A2 fuel fill hose for gasoline (including ethanol blends) and diesel (including bio diesel blends). \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThis hose is built with the best fuel, fire, and age-resistant formulation \u003c\/li\u003e\n\u003cli\u003eProvides extraordinary resistance to aging, fire, heat, cold, and the ozone \u003c\/li\u003e\n\u003cli\u003eAlso, provides excellent bend-ability\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose for fill and vent plus diesel distribution\u003c\/li\u003e\n\u003cli\u003eApproved, for all marine fuels including gasoline, alcohol blends, diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube \u0026amp; Cover: NBR \/ Neoprene \u003c\/li\u003e\n\u003cli\u003eReinforcement: High tenacity polyester 2 spiral, spring steel helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-20ºC to 100ºC) \u003c\/li\u003e\n\u003cli\u003eLength: 50 ft. (15.24 m) Coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 2\" \/ (mm) 50.8\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 2.48 \/ (mm) 63.5\u003c\/li\u003e\n\u003cli\u003eWall: (inch) 0.25 \/ (mm) 6.4\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 50 \/ (mpa) 0.345\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 7.0\" \/ (mm) 178\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #327 series exceeds ABYC H-24 \u0026amp; H-33, SAE J1527, ISO 7840, \u0026amp; USCG Type A2; and is NMMA Type Accepted, CE certified, and Lloyds Registry Type Approved\u003c\/p\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46387362988194,"sku":"98954","price":1239.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/98954XL.jpg?v=1765338725"},{"product_id":"trident-marine-3-8-low-permeation-type-a1-15-fuel-line-hose-black-sold-by-the-foot-99612","title":"Trident Marine 3\/8\" Low Permeation Type A1-15 Fuel Line Hose - Black - Sold by the Foot MPN - 365-0386-FT","description":"\u003cp\u003e\u003cstrong\u003e3\/8\" Low Permeation Type A1-15 Fuel Line Hose - Black - Sold by the Foot\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTrident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation, and a unique \"Barrier Liner\" on the inside surface of the tube, so fuel is not in direct contact with rubber.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold by the foot\u003c\/li\u003e\n\u003cli\u003eProvides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone \u003c\/li\u003e\n\u003cli\u003eAlso provides excellent bend-ability\u003c\/li\u003e\n\u003cli\u003eNMMA Type Accepted \u0026amp; CE certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose (distribution, return, vent and transfer)\u003c\/li\u003e\n\u003cli\u003eFor all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube: Nylon Internal Barrier, NBR \u003c\/li\u003e\n\u003cli\u003eCover: NBR\/PVC Blend \u003c\/li\u003e\n\u003cli\u003eReinforcement: Polyester 2 spiral \u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-28ºC to 100ºC) \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 3\/8\" \/ (mm) 9.50\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 0.681 \/ (mm) 17.3\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: (psi) 400 \/ (mpa) 2.76\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 100 \/ (mpa) 0.69\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 2\" \/ (mm) 50.8\u003c\/li\u003e\n\u003cli\u003eWeight: (lb\/100 ft.) 15.6 \/ (kg\/m) 0.233\u003c\/li\u003e\n\u003cli\u003ePermeation Rate: \u0026lt;10 (Standard is 10g\/m2\/24 hrs (CE10)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #365 series exceeds ABYC H-24 \u0026amp; H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46387390513314,"sku":"99612","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/99612XL.jpg?v=1765339166"},{"product_id":"trident-marine-5-16-low-permeation-type-a1-15-fuel-line-hose-black-sold-by-the-foot-99613","title":"Trident Marine 5\/16\" Low Permeation Type A1-15 Fuel Line Hose - Black - Sold by the Foot MPN - 365-0566-FT","description":"\u003cp\u003e\u003cstrong\u003e5\/16\" Low Permeation Type A1-15 Fuel Line Hose - Black - Sold by the Foot\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTrident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation and a unique \"Barrier Liner\" on the inside surface of the tube, so fuel is not in direct contact with rubber.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold by the foot \u003c\/li\u003e\n\u003cli\u003eProvides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone \u003c\/li\u003e\n\u003cli\u003eAlso provides excellent bend-ability\u003c\/li\u003e\n\u003cli\u003eNMMA Type Accepted \u0026amp; CE certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose (distribution, return, vent and transfer)\u003c\/li\u003e\n\u003cli\u003eFor all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube: Nylon Internal Barrier, NBR \u003c\/li\u003e\n\u003cli\u003eCover: NBR\/PVC Blend \u003c\/li\u003e\n\u003cli\u003eReinforcement: Polyester 2 spiral \u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-28ºC to 100ºC) \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 5\/16\" \/ (mm) 7.92\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 0.611 \/ (mm) 15.5\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: (psi) 400 \/ (mpa) 2.76\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 100 \/ (mpa) 0.69\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 1.75\" \/ (mm) 44.5\u003c\/li\u003e\n\u003cli\u003eWeight: (lb\/100 ft.) 13.3 \/ (kg\/m) 0.198\u003c\/li\u003e\n\u003cli\u003ePermeation Rate: \u0026lt;10 (Standard is 10g\/m2\/24 hrs (CE10)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #365 series exceeds ABYC H-24 \u0026amp; H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46387390546082,"sku":"99613","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/99613XL.jpg?v=1765339166"},{"product_id":"trident-marine-5-8-type-a2-fuel-vent-line-hose-black-sold-by-the-foot-99614","title":"Trident Marine 5\/8\" Type A2 Fuel \u0026 Vent Line Hose - Black - Sold by the Foot MPN - 317-0586-FT","description":"\u003cp\u003e\u003cstrong\u003e5\/8\" Type A2 Fuel \u0026amp; Vent Line Hose - Black - Sold by the Foot\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTrident 5\/8” A2 Fuel Hose for gasoline vent hose (including ethanol blends) and diesel (including bio diesel blends). This hose is built with the best fuel, fire and age resistant formulation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold by the foot\u003c\/li\u003e\n\u003cli\u003eProvides extraordinary resistance to aging, fire, heat, cold, and the ozone \u003c\/li\u003e\n\u003cli\u003eAlso provides excellent bend-ability\u003c\/li\u003e\n\u003cli\u003eNMMA Type Accepted \u0026amp; CE certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFuel Hose for vent and diesel distribution \u003c\/li\u003e\n\u003cli\u003eFor all marine fuels including gasoline, alcohol blends, diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube: Nylon Internal Barrier, NBR \u003c\/li\u003e\n\u003cli\u003eCover: NBR\/PVC Blend \u003c\/li\u003e\n\u003cli\u003eReinforcement: Polyester 2 spiral \u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-28ºC to 100ºC) \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 5\/8\" \/ (mm) 15.9\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 0.960 \/ (mm) 24.4\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: (psi) 200 \/ (mpa) 1.38\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 50 \/ (mpa) 0.34\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 3\" \/ (mm) 76.2\u003c\/li\u003e\n\u003cli\u003eWeight: (lb\/100 ft.) 25.84 \/ (kg\/m) 11.72\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #317 series exceeds ABYC H-24 \u0026amp; H-33, SAE J1527, ISO 7840, \u0026amp; USCG Type A2\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46387390644386,"sku":"99614","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/99614XL.jpg?v=1765339168"},{"product_id":"trident-marine-3-8-barrier-lined-b1-15-epa-compliant-outboard-fuel-line-hose-gray-sold-by-the-foot-99615","title":"Trident Marine 3\/8\" Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray - Sold by the Foot MPN - 305-0386-FT","description":"\u003cp\u003e\u003cstrong\u003e3\/8\" Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray - Sold by the Foot\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis hose is built with the best fuel and age-resistant formulations and a unique \"Barrier Liner\" on the inside surface of the tube, so the fuel is not in direct contact with rubber. This greatly reduces fuel permeation and prevents ethanol degradation of the rubber tube, which can cause small pieces of rubber to reach and damage the engine. That is particularly important considering the prospect of higher ethanol blends (E-15) available at gas stations next year. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold by the Foot\u003c\/li\u003e\n\u003cli\u003eProvides extraordinary resistance to fuel permeation, aging, heat, cold, and ozone  \u003c\/li\u003e\n\u003cli\u003eAlso, provides excellent rope-like bend-ability and fitting retention\u003c\/li\u003e\n\u003cli\u003eFor both gasoline (including ethanol blends up to E85) and diesel (including bio diesel blends up to 100%)\u003c\/li\u003e\n\u003cli\u003eEPA Certified and CARB Executive Order for low permeation Type B1-15\u003c\/li\u003e\n\u003cli\u003eNMMA Type Accepted \u0026amp; CE certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose for distribution, return, vent and transfer\u003c\/li\u003e\n\u003cli\u003eFor all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube: Fluoroplastic Internal Barrier\u003c\/li\u003e\n\u003cli\u003eCover: Gray CPE Rubber\u003c\/li\u003e\n\u003cli\u003eReinforcement: 2-Spiral Polyester Plies \u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-28ºC to 100ºC)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 3\/8\" \/ (mm) 9.50\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 0.588 \/ (mm) 14.9\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: (psi) 175 \/ (mpa) 1.21\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 35 \/ (mpa) 0.24\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 4\" \/ (mm) 101.6\u003c\/li\u003e\n\u003cli\u003eWeight: (lb\/100 ft.) 10.5 \/ (kg\/m) 0.156\u003c\/li\u003e\n\u003cli\u003ePermeation Rate (Standard is (15g\/m^2\/24hrs (CE10)): 5.0\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #305 series exceeds ABYC H-24, SAE J1527, ISO 8469 B1, USCG Type B1-15\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46387390677154,"sku":"99615","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/99615XL.jpg?v=1765339169"},{"product_id":"trident-marine-5-16-barrier-lined-b1-15-epa-compliant-outboard-fuel-line-hose-gray-sold-by-the-foot-99616","title":"Trident Marine 5\/16\" Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray - Sold by the Foot MPN - 305-0566-FT","description":"\u003cp\u003e\u003cstrong\u003e5\/16\" Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray - Sold by the Foot\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis hose is built with the best fuel and age-resistant formulations and a unique \"Barrier Liner\" on the inside surface of the tube, so fuel is not in direct contact with rubber. This greatly reduces fuel permeation and prevents ethanol degradation of the rubber tube, which can cause small pieces of rubber to reach and damage the engine. That is particularly important considering the prospect of higher ethanol blends (E-15) available at gas stations next year. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold by the foot\u003c\/li\u003e\n\u003cli\u003eProvides extraordinary resistance to fuel permeation, aging, heat, cold, and ozone  \u003c\/li\u003e\n\u003cli\u003eAlso, provides excellent rope-like bend-ability and fitting retention\u003c\/li\u003e\n\u003cli\u003eFor both gasoline (including ethanol blends up to E85) and diesel (including bio diesel blends up to 100%)\u003c\/li\u003e\n\u003cli\u003eEPA Certified and CARB Executive Order for low permeation Type B1-15\u003c\/li\u003e\n\u003cli\u003eNMMA Type Accepted \u0026amp; CE certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose for distribution, return, vent and transfer\u003c\/li\u003e\n\u003cli\u003eFor all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube: Fluoroplastic Internal Barrier\u003c\/li\u003e\n\u003cli\u003eCover: Gray CPE Rubber\u003c\/li\u003e\n\u003cli\u003eReinforcement: 2-Spiral Polyester Plies \u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-28ºC to 100ºC)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 5\/16\" \/ (mm) 7.92\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 0.500 \/ (mm) 12.7\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: (psi) 175 \/ (mpa) 1.21\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 35 \/ (mpa) 0.24\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 2.5\" \/ (mm) 63.5\u003c\/li\u003e\n\u003cli\u003eWeight: (lb\/100 ft.) 7.8 \/ (kg\/m) 0.116\u003c\/li\u003e\n\u003cli\u003ePermeation Rate (Standard is (15g\/m^2\/24hrs (CE10)): 5.0\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #305 series exceeds ABYC H-24, SAE J1527, ISO 8469 B1, USCG Type B1-15\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46387390775458,"sku":"99616","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/99616XL.jpg?v=1765339172"},{"product_id":"trident-marine-1-1-2-type-a2-fuel-fill-hose-sold-by-the-foot-99617","title":"Trident Marine 1-1\/2\" Type A2 Fuel Fill Hose - Sold by the Foot MPN - 327-1126-FT","description":"\u003cp\u003e\u003cstrong\u003e1-1\/2\" Type A2 Fuel Fill Hose - Sold by the Foot\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTrident 1-1\/2\" ID A2 fuel fill hose for gasoline (including ethanol blends) and diesel (including bio diesel blends). \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold by the foot \u003c\/li\u003e\n\u003cli\u003eThis hose is built with the best fuel, fire, and age-resistant formulation \u003c\/li\u003e\n\u003cli\u003eProvides extraordinary resistance to aging, fire, heat, cold, and the ozone \u003c\/li\u003e\n\u003cli\u003eAlso, provides excellent bend-ability\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose for fill and vent plus diesel distribution\u003c\/li\u003e\n\u003cli\u003eApproved, for all marine fuels including gasoline, alcohol blends, diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube \u0026amp; Cover: NBR \/ Neoprene \u003c\/li\u003e\n\u003cli\u003eReinforcement: High tenacity polyester 2 spiral, spring steel helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-20ºC to 100ºC) \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 1-1\/2\" \/ (mm) 38\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 2 \/ (mm) 51\u003c\/li\u003e\n\u003cli\u003eWall: (inch) 0.25 \/ (mm) 6.4\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 60 \/ (mpa) 0.41\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 5.5\" \/ (mm) 140\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #327 series exceeds ABYC H-24 \u0026amp; H-33, SAE J1527, ISO 7840, \u0026amp; USCG Type A2; and is NMMA Type Accepted, CE certified, and Lloyds Registry Type Approved\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46387390808226,"sku":"99617","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/99617XL.jpg?v=1765339171"},{"product_id":"trident-marine-2-type-a2-fuel-fill-hose-sold-by-the-foot-99618","title":"Trident Marine 2\" Type A2 Fuel Fill Hose - Sold by the Foot MPN - 327-2006-FT","description":"\u003cp\u003e\u003cstrong\u003e2\" Type A2 Fuel Fill Hose - Sold by the Foot\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTrident 2\" ID A2 fuel fill hose for gasoline (including ethanol blends) and diesel (including bio diesel blends). \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold by the foot\u003c\/li\u003e\n\u003cli\u003eThis hose is built with the best fuel, fire, and age-resistant formulation \u003c\/li\u003e\n\u003cli\u003eProvides extraordinary resistance to aging, fire, heat, cold, and the ozone \u003c\/li\u003e\n\u003cli\u003eAlso, provides excellent bend-ability\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose for fill and vent plus diesel distribution\u003c\/li\u003e\n\u003cli\u003eApproved, for all marine fuels including gasoline, alcohol blends, diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube \u0026amp; Cover: NBR \/ Neoprene \u003c\/li\u003e\n\u003cli\u003eReinforcement: High tenacity polyester 2 spiral, spring steel helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-20ºC to 100ºC)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 2\" \/ (mm) 50.8\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 2.48 \/ (mm) 63.5\u003c\/li\u003e\n\u003cli\u003eWall: (inch) 0.25 \/ (mm) 6.4\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 50 \/ (mpa) 0.345\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 7.0\" \/ (mm) 178\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #327 series exceeds ABYC H-24 \u0026amp; H-33, SAE J1527, ISO 7840, \u0026amp; USCG Type A2; and is NMMA Type Accepted, CE certified, and Lloyds Registry Type Approved\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46387390906530,"sku":"99618","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/99618XL.jpg?v=1765339174"},{"product_id":"trident-marine-1-1-2-x-12-5-ocean-flex-multipurpose-hose-107196","title":"Trident Marine 1-1\/2\" x 12.5' Ocean-Flex Multipurpose Hose MPN - 321-1124","description":"\u003cp\u003e\u003cstrong\u003e1-1\/2\" x 12.5' Ocean-Flex Multipurpose Hose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis unique marine hose can be used for a multitude of applications for both Commercial and Recreational Vessels including Fuel Fill, Feed, and Vent (Diesel \u0026amp; Gasoline – Type A1), Lube Oil, Wet Exhaust, Water (Vital and Non-Vital), Bilge, Coolant, Drains, and Sanitation applications. OCEAN-FLEX boasts compliance with the following standards: USCG Inspected Vessels (Title 46 CFR Sub-Chap. T), SAE J1942 (Code F, VW, NVW), USCG Type A1, SAE J1527 A1 R2, SAE J2006 R2, SAE J20R2 B, SAE J20R4 B, SAE J20R5 B, SAE J30R5, ABYC H-22, H-24, H-33 P-1, P-4, ISO 7840 A1, ISO 8469 B1, ISO 13363 2B, and CE.\u003c\/p\u003e\u003cp\u003eProvides excellent resistance to fuel, fire, heat, cold, ozone, and aging. Also provides excellent bend-ability and adheres to more standards than any other marine hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstruction: Tube Black Nitrile, Cover Black Nitrile\u003c\/li\u003e\n\u003cli\u003eReinforcement: Multiple Textile Spirals, Dual Steel Wire Helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-29ºC to 100ºC)\u003c\/li\u003e\n\u003cli\u003eLengths: 12.5’ (3.81 m) Length, 25’ (7.62 m) Coil (4”–6”), 50’ (15.24 m) Coil (up to 3-1\/2” ID.)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 321-1124\u003c\/p\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":47479343677602,"sku":"107196","price":361.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/107196XL.jpg?v=1785229142"},{"product_id":"trident-marine-1-1-2-x-25-ocean-flex-multipurpose-hose-107197","title":"Trident Marine 1-1\/2\" x 25' Ocean-Flex Multipurpose Hose MPN - 321-1125","description":"\u003cp\u003e\u003cstrong\u003e1-1\/2\" x 25' Ocean-Flex Multipurpose Hose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis unique marine hose can be used for a multitude of applications for both Commercial and Recreational Vessels including Fuel Fill, Feed, and Vent (Diesel \u0026amp; Gasoline – Type A1), Lube Oil, Wet Exhaust, Water (Vital and Non-Vital), Bilge, Coolant, Drains, and Sanitation applications. OCEAN-FLEX boasts compliance with the following standards: USCG Inspected Vessels (Title 46 CFR Sub-Chap. T), SAE J1942 (Code F, VW, NVW), USCG Type A1, SAE J1527 A1 R2, SAE J2006 R2, SAE J20R2 B, SAE J20R4 B, SAE J20R5 B, SAE J30R5, ABYC H-22, H-24, H-33 P-1, P-4, ISO 7840 A1, ISO 8469 B1, ISO 13363 2B, and CE.\u003c\/p\u003e\u003cp\u003eProvides excellent resistance to fuel, fire, heat, cold, ozone, and aging. Also provides excellent bend-ability and adheres to more standards than any other marine hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstruction: Tube Black Nitrile, Cover Black Nitrile\u003c\/li\u003e\n\u003cli\u003eReinforcement: Multiple Textile Spirals, Dual Steel Wire Helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-29ºC to 100ºC)\u003c\/li\u003e\n\u003cli\u003eLengths: 12.5’ (3.81 m) Length, 25’ (7.62 m) Coil (4”–6”), 50’ (15.24 m) Coil (up to 3-1\/2” ID.)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 321-1125\u003c\/p\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":47479343710370,"sku":"107197","price":722.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/107197XL.jpg?v=1785229142"},{"product_id":"trident-marine-1-1-2-x-50-ocean-flex-multipurpose-hose-107198","title":"Trident Marine 1-1\/2\" x 50' Ocean-Flex Multipurpose Hose MPN - 321-1126","description":"\u003cp\u003e\u003cstrong\u003e1-1\/2\" x 50' Ocean-Flex Multipurpose Hose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis unique marine hose can be used for a multitude of applications for both Commercial and Recreational Vessels including Fuel Fill, Feed, and Vent (Diesel \u0026amp; Gasoline – Type A1), Lube Oil, Wet Exhaust, Water (Vital and Non-Vital), Bilge, Coolant, Drains, and Sanitation applications. OCEAN-FLEX boasts compliance with the following standards: USCG Inspected Vessels (Title 46 CFR Sub-Chap. T), SAE J1942 (Code F, VW, NVW), USCG Type A1, SAE J1527 A1 R2, SAE J2006 R2, SAE J20R2 B, SAE J20R4 B, SAE J20R5 B, SAE J30R5, ABYC H-22, H-24, H-33 P-1, P-4, ISO 7840 A1, ISO 8469 B1, ISO 13363 2B, and CE.\u003c\/p\u003e\u003cp\u003eProvides excellent resistance to fuel, fire, heat, cold, ozone, and aging. Also provides excellent bend-ability and adheres to more standards than any other marine hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstruction: Tube Black Nitrile, Cover Black Nitrile\u003c\/li\u003e\n\u003cli\u003eReinforcement: Multiple Textile Spirals, Dual Steel Wire Helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-29ºC to 100ºC)\u003c\/li\u003e\n\u003cli\u003eLengths: 12.5’ (3.81 m) Length, 25’ (7.62 m) Coil (4”–6”), 50’ (15.24 m) Coil (up to 3-1\/2” ID.)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 321-1126\u003c\/p\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":47479343906978,"sku":"107198","price":1445.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/107198XL.jpg?v=1785229146"},{"product_id":"trident-marine-1-1-2-ocean-flex-multipurpose-hose-sold-by-the-foot-107199","title":"Trident Marine 1-1\/2\" Ocean-Flex Multipurpose Hose - Sold by the Foot MPN - 321-1126-FT","description":"\u003cp\u003e\u003cstrong\u003e1-1\/2\" Ocean-Flex Multipurpose Hose - Sold by the Foot\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis unique marine hose can be used for a multitude of applications for both Commercial and Recreational Vessels including Fuel Fill, Feed, and Vent (Diesel \u0026amp; Gasoline – Type A1), Lube Oil, Wet Exhaust, Water (Vital and Non-Vital), Bilge, Coolant, Drains, and Sanitation applications. OCEAN-FLEX boasts compliance with the following standards: USCG Inspected Vessels (Title 46 CFR Sub-Chap. T), SAE J1942 (Code F, VW, NVW), USCG Type A1, SAE J1527 A1 R2, SAE J2006 R2, SAE J20R2 B, SAE J20R4 B, SAE J20R5 B, SAE J30R5, ABYC H-22, H-24, H-33 P-1, P-4, ISO 7840 A1, ISO 8469 B1, ISO 13363 2B, and CE.\u003c\/p\u003e\u003cp\u003eProvides excellent resistance to fuel, fire, heat, cold, ozone, and aging. Also provides excellent bend-ability and adheres to more standards than any other marine hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstruction: Tube Black Nitrile, Cover Black Nitrile\u003c\/li\u003e\n\u003cli\u003eReinforcement: Multiple Textile Spirals, Dual Steel Wire Helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-29ºC to 100ºC)\u003c\/li\u003e\n\u003cli\u003eLengths: 12.5’ (3.81 m) Length, 25’ (7.62 m) Coil (4”–6”), 50’ (15.24 m) Coil (up to 3-1\/2” ID.)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 321-1126-FT\u003c\/p\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":47479343841442,"sku":"107199","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/107199XL.jpg?v=1785229145"},{"product_id":"trident-marine-2-x-12-5-ocean-flex-multipurpose-hose-107201","title":"Trident Marine 2\" x 12.5' Ocean-Flex Multipurpose Hose MPN - 321-2004","description":"\u003cp\u003e\u003cstrong\u003e2\" x 12.5' Ocean-Flex Multipurpose Hose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis unique marine hose can be used for a multitude of applications for both Commercial and Recreational Vessels including Fuel Fill, Feed, and Vent (Diesel \u0026amp; Gasoline – Type A1), Lube Oil, Wet Exhaust, Water (Vital and Non-Vital), Bilge, Coolant, Drains, and Sanitation applications. OCEAN-FLEX boasts compliance with the following standards: USCG Inspected Vessels (Title 46 CFR Sub-Chap. T), SAE J1942 (Code F, VW, NVW), USCG Type A1, SAE J1527 A1 R2, SAE J2006 R2, SAE J20R2 B, SAE J20R4 B, SAE J20R5 B, SAE J30R5, ABYC H-22, H-24, H-33 P-1, P-4, ISO 7840 A1, ISO 8469 B1, ISO 13363 2B, and CE.\u003c\/p\u003e\u003cp\u003eProvides excellent resistance to fuel, fire, heat, cold, ozone, and aging. Also provides excellent bend-ability and adheres to more standards than any other marine hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstruction: Tube Black Nitrile, Cover Black Nitrile\u003c\/li\u003e\n\u003cli\u003eReinforcement: Multiple Textile Spirals, Dual Steel Wire Helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-29ºC to 100ºC)\u003c\/li\u003e\n\u003cli\u003eLengths: 12.5’ (3.81 m) Length, 25’ (7.62 m) Coil (4”–6”), 50’ (15.24 m) Coil (up to 3-1\/2” ID.)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 321-2004\u003c\/p\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":47479343972514,"sku":"107201","price":445.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/107201XL.jpg?v=1785229149"},{"product_id":"trident-marine-2-x-25-ocean-flex-multipurpose-hose-107202","title":"Trident Marine 2\" x 25' Ocean-Flex Multipurpose Hose MPN - 321-2005","description":"\u003cp\u003e\u003cstrong\u003e2\" x 25' Ocean-Flex Multipurpose Hose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis unique marine hose can be used for a multitude of applications for both Commercial and Recreational Vessels including Fuel Fill, Feed, and Vent (Diesel \u0026amp; Gasoline – Type A1), Lube Oil, Wet Exhaust, Water (Vital and Non-Vital), Bilge, Coolant, Drains, and Sanitation applications. OCEAN-FLEX boasts compliance with the following standards: USCG Inspected Vessels (Title 46 CFR Sub-Chap. T), SAE J1942 (Code F, VW, NVW), USCG Type A1, SAE J1527 A1 R2, SAE J2006 R2, SAE J20R2 B, SAE J20R4 B, SAE J20R5 B, SAE J30R5, ABYC H-22, H-24, H-33 P-1, P-4, ISO 7840 A1, ISO 8469 B1, ISO 13363 2B, and CE.\u003c\/p\u003e\u003cp\u003eProvides excellent resistance to fuel, fire, heat, cold, ozone, and aging. Also provides excellent bend-ability and adheres to more standards than any other marine hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstruction: Tube Black Nitrile, Cover Black Nitrile\u003c\/li\u003e\n\u003cli\u003eReinforcement: Multiple Textile Spirals, Dual Steel Wire Helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-29ºC to 100ºC)\u003c\/li\u003e\n\u003cli\u003eLengths: 12.5’ (3.81 m) Length, 25’ (7.62 m) Coil (4”–6”), 50’ (15.24 m) Coil (up to 3-1\/2” ID.)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 321-2005\u003c\/p\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":47479344038050,"sku":"107202","price":891.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/107202XL.jpg?v=1785229150"},{"product_id":"trident-marine-2-x-50-ocean-flex-multipurpose-hose-107204","title":"Trident Marine 2\" x 50' Ocean-Flex Multipurpose Hose MPN - 321-2006","description":"\u003cp\u003e\u003cstrong\u003e2\" x 50' Ocean-Flex Multipurpose Hose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis unique marine hose can be used for a multitude of applications for both Commercial and Recreational Vessels including Fuel Fill, Feed, and Vent (Diesel \u0026amp; Gasoline – Type A1), Lube Oil, Wet Exhaust, Water (Vital and Non-Vital), Bilge, Coolant, Drains, and Sanitation applications. OCEAN-FLEX boasts compliance with the following standards: USCG Inspected Vessels (Title 46 CFR Sub-Chap. T), SAE J1942 (Code F, VW, NVW), USCG Type A1, SAE J1527 A1 R2, SAE J2006 R2, SAE J20R2 B, SAE J20R4 B, SAE J20R5 B, SAE J30R5, ABYC H-22, H-24, H-33 P-1, P-4, ISO 7840 A1, ISO 8469 B1, ISO 13363 2B, and CE.\u003c\/p\u003e\u003cp\u003eProvides excellent resistance to fuel, fire, heat, cold, ozone, and aging. Also provides excellent bend-ability and adheres to more standards than any other marine hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstruction: Tube Black Nitrile, Cover Black Nitrile\u003c\/li\u003e\n\u003cli\u003eReinforcement: Multiple Textile Spirals, Dual Steel Wire Helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-29ºC to 100ºC)\u003c\/li\u003e\n\u003cli\u003eLengths: 12.5’ (3.81 m) Length, 25’ (7.62 m) Coil (4”–6”), 50’ (15.24 m) Coil (up to 3-1\/2” ID.)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 321-2006\u003c\/p\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":47479344136354,"sku":"107204","price":1783.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/107204XL.jpg?v=1785229154"},{"product_id":"trident-marine-2-ocean-flex-multipurpose-hose-sold-by-the-foot-107206","title":"Trident Marine 2\" Ocean-Flex Multipurpose Hose - Sold by the Foot MPN - 321-2006-FT","description":"\u003cp\u003e\u003cstrong\u003e2\" Ocean-Flex Multipurpose Hose - Sold by the Foot\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis unique marine hose can be used for a multitude of applications for both Commercial and Recreational Vessels including Fuel Fill, Feed, and Vent (Diesel \u0026amp; Gasoline – Type A1), Lube Oil, Wet Exhaust, Water (Vital and Non-Vital), Bilge, Coolant, Drains, and Sanitation applications. OCEAN-FLEX boasts compliance with the following standards: USCG Inspected Vessels (Title 46 CFR Sub-Chap. T), SAE J1942 (Code F, VW, NVW), USCG Type A1, SAE J1527 A1 R2, SAE J2006 R2, SAE J20R2 B, SAE J20R4 B, SAE J20R5 B, SAE J30R5, ABYC H-22, H-24, H-33 P-1, P-4, ISO 7840 A1, ISO 8469 B1, ISO 13363 2B, and CE.\u003c\/p\u003e\u003cp\u003eProvides excellent resistance to fuel, fire, heat, cold, ozone, and aging. Also provides excellent bend-ability and adheres to more standards than any other marine hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstruction: Tube Black Nitrile, Cover Black Nitrile\u003c\/li\u003e\n\u003cli\u003eReinforcement: Multiple Textile Spirals, Dual Steel Wire Helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-29ºC to 100ºC)\u003c\/li\u003e\n\u003cli\u003eLengths: 12.5’ (3.81 m) Length, 25’ (7.62 m) Coil (4”–6”), 50’ (15.24 m) Coil (up to 3-1\/2” ID.)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 321-2006-FT\u003c\/p\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":47479344300194,"sku":"107206","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/107206XL.jpg?v=1785229157"},{"product_id":"trident-marine-2-1-2-x-12-5-ocean-flex-multipurpose-hose-107207","title":"Trident Marine 2-1\/2\" x 12.5' Ocean-Flex Multipurpose Hose MPN - 321-2124","description":"\u003cp\u003e\u003cstrong\u003e2-1\/2\" x 12.5' Ocean-Flex Multipurpose Hose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis unique marine hose can be used for a multitude of applications for both Commercial and Recreational Vessels including Fuel Fill, Feed, and Vent (Diesel \u0026amp; Gasoline – Type A1), Lube Oil, Wet Exhaust, Water (Vital and Non-Vital), Bilge, Coolant, Drains, and Sanitation applications. OCEAN-FLEX boasts compliance with the following standards: USCG Inspected Vessels (Title 46 CFR Sub-Chap. T), SAE J1942 (Code F, VW, NVW), USCG Type A1, SAE J1527 A1 R2, SAE J2006 R2, SAE J20R2 B, SAE J20R4 B, SAE J20R5 B, SAE J30R5, ABYC H-22, H-24, H-33 P-1, P-4, ISO 7840 A1, ISO 8469 B1, ISO 13363 2B, and CE.\u003c\/p\u003e\u003cp\u003eProvides excellent resistance to fuel, fire, heat, cold, ozone, and aging. Also provides excellent bend-ability and adheres to more standards than any other marine hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstruction: Tube Black Nitrile, Cover Black Nitrile\u003c\/li\u003e\n\u003cli\u003eReinforcement: Multiple Textile Spirals, Dual Steel Wire Helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-29ºC to 100ºC)\u003c\/li\u003e\n\u003cli\u003eLengths: 12.5’ (3.81 m) Length, 25’ (7.62 m) Coil (4”–6”), 50’ (15.24 m) Coil (up to 3-1\/2” ID.)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 321-2124\u003c\/p\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":47479344431266,"sku":"107207","price":586.78,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/107207XL.jpg?v=1785229161"},{"product_id":"trident-marine-2-1-2-x-25-ocean-flex-multipurpose-hose-107208","title":"Trident Marine 2-1\/2\" x 25' Ocean-Flex Multipurpose Hose MPN - 321-2125","description":"\u003cp\u003e\u003cstrong\u003e2-1\/2\" x 25' Ocean-Flex Multipurpose Hose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis unique marine hose can be used for a multitude of applications for both Commercial and Recreational Vessels including Fuel Fill, Feed, and Vent (Diesel \u0026amp; Gasoline – Type A1), Lube Oil, Wet Exhaust, Water (Vital and Non-Vital), Bilge, Coolant, Drains, and Sanitation applications. OCEAN-FLEX boasts compliance with the following standards: USCG Inspected Vessels (Title 46 CFR Sub-Chap. T), SAE J1942 (Code F, VW, NVW), USCG Type A1, SAE J1527 A1 R2, SAE J2006 R2, SAE J20R2 B, SAE J20R4 B, SAE J20R5 B, SAE J30R5, ABYC H-22, H-24, H-33 P-1, P-4, ISO 7840 A1, ISO 8469 B1, ISO 13363 2B, and CE.\u003c\/p\u003e\u003cp\u003eProvides excellent resistance to fuel, fire, heat, cold, ozone, and aging. Also provides excellent bend-ability and adheres to more standards than any other marine hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstruction: Tube Black Nitrile, Cover Black Nitrile\u003c\/li\u003e\n\u003cli\u003eReinforcement: Multiple Textile Spirals, Dual Steel Wire Helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-29ºC to 100ºC)\u003c\/li\u003e\n\u003cli\u003eLengths: 12.5’ (3.81 m) Length, 25’ (7.62 m) Coil (4”–6”), 50’ (15.24 m) Coil (up to 3-1\/2” ID.)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 321-2125\u003c\/p\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":47479344398498,"sku":"107208","price":1173.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/107208XL.jpg?v=1785229161"},{"product_id":"trident-marine-2-1-2-x-50-ocean-flex-multipurpose-hose-107209","title":"Trident Marine 2-1\/2\" x 50' Ocean-Flex Multipurpose Hose MPN - 321-2126","description":"\u003cp\u003e\u003cstrong\u003e2-1\/2\" x 50' Ocean-Flex Multipurpose Hose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis unique marine hose can be used for a multitude of applications for both Commercial and Recreational Vessels including Fuel Fill, Feed, and Vent (Diesel \u0026amp; Gasoline – Type A1), Lube Oil, Wet Exhaust, Water (Vital and Non-Vital), Bilge, Coolant, Drains, and Sanitation applications. OCEAN-FLEX boasts compliance with the following standards: USCG Inspected Vessels (Title 46 CFR Sub-Chap. T), SAE J1942 (Code F, VW, NVW), USCG Type A1, SAE J1527 A1 R2, SAE J2006 R2, SAE J20R2 B, SAE J20R4 B, SAE J20R5 B, SAE J30R5, ABYC H-22, H-24, H-33 P-1, P-4, ISO 7840 A1, ISO 8469 B1, ISO 13363 2B, and CE.\u003c\/p\u003e\u003cp\u003eProvides excellent resistance to fuel, fire, heat, cold, ozone, and aging. Also provides excellent bend-ability and adheres to more standards than any other marine hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstruction: Tube Black Nitrile, Cover Black Nitrile\u003c\/li\u003e\n\u003cli\u003eReinforcement: Multiple Textile Spirals, Dual Steel Wire Helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-29ºC to 100ºC)\u003c\/li\u003e\n\u003cli\u003eLengths: 12.5’ (3.81 m) Length, 25’ (7.62 m) Coil (4”–6”), 50’ (15.24 m) Coil (up to 3-1\/2” ID.)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 321-2126\u003c\/p\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":47479344562338,"sku":"107209","price":2347.13,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/107209XL.jpg?v=1785229165"},{"product_id":"trident-marine-2-1-2-ocean-flex-multipurpose-hose-sold-by-the-foot-107210","title":"Trident Marine 2-1\/2\" Ocean-Flex Multipurpose Hose - Sold by the Foot MPN - 321-2126-FT","description":"\u003cp\u003e\u003cstrong\u003e2-1\/2\" Ocean-Flex Multipurpose Hose - Sold by the Foot\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis unique marine hose can be used for a multitude of applications for both Commercial and Recreational Vessels including Fuel Fill, Feed, and Vent (Diesel \u0026amp; Gasoline – Type A1), Lube Oil, Wet Exhaust, Water (Vital and Non-Vital), Bilge, Coolant, Drains, and Sanitation applications. OCEAN-FLEX boasts compliance with the following standards: USCG Inspected Vessels (Title 46 CFR Sub-Chap. T), SAE J1942 (Code F, VW, NVW), USCG Type A1, SAE J1527 A1 R2, SAE J2006 R2, SAE J20R2 B, SAE J20R4 B, SAE J20R5 B, SAE J30R5, ABYC H-22, H-24, H-33 P-1, P-4, ISO 7840 A1, ISO 8469 B1, ISO 13363 2B, and CE.\u003c\/p\u003e\u003cp\u003eProvides excellent resistance to fuel, fire, heat, cold, ozone, and aging. Also provides excellent bend-ability and adheres to more standards than any other marine hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstruction: Tube Black Nitrile, Cover Black Nitrile\u003c\/li\u003e\n\u003cli\u003eReinforcement: Multiple Textile Spirals, Dual Steel Wire Helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-29ºC to 100ºC)\u003c\/li\u003e\n\u003cli\u003eLengths: 12.5’ (3.81 m) Length, 25’ (7.62 m) Coil (4”–6”), 50’ (15.24 m) Coil (up to 3-1\/2” ID.)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 321-2126-FT\u003c\/p\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":47479344529570,"sku":"107210","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/107210XL.jpg?v=1785229165"}],"url":"https:\/\/marinerswarehouse.com\/collections\/trident-marine-fuel-hoses.oembed","provider":"Mariners Warehouse Shop","version":"1.0","type":"link"}