{"title":"NMEA 2000 Sensors \u0026 Control Modules","description":"\u003cp\u003eBrowse NMEA 2000 sensors, gateways, control modules and compatible connection parts. Verify device specifications.\u003c\/p\u003e","products":[{"product_id":"humminbird-as-gps-hs-n2k-gps-sensor-nmea2000","title":"Humminbird AS-GPS-HS-N2K GPS Sensor NMEA2000 MPN - 730029-1","description":"\u003cp\u003e\u003cstrong\u003eHumminbird AS-GPS-HS-N2K GPS Sensor NMEA2000\u003c\/strong\u003e\u003c\/p\u003eModel: 730029-1\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eAdvanced GPS compass and heading sensor reads true direction while sitting still or moving\u003c\/li\u003e\n\u003cli\u003eAllows true accuracy of waypoints to be created while using advanced sonar like MEGA 360 ImagingTM\u003c\/li\u003e\n\u003cli\u003eThis Humminbird NMEA 2000 device can be connected to a conventional NMEA 2000 network or connected directly to a compatible NMEA 2000 capable fish finder with the Direct NMEA 2000 cable (Included)\u003c\/li\u003e\n\u003cli\u003eDual-band GPS receiver with WAAS\/EGNOS capability\u003c\/li\u003e\n\u003cli\u003eView your track \u0026amp; speed, mark waypoints, navigate and more\u003c\/li\u003e\n\u003cli\u003eMount on any flat surface or 1 in x 14 thread\u003c\/li\u003e\n\u003cli\u003ePlug and play installation\u003c\/li\u003e\n\u003cli\u003eThis NMEA 2000 accessory is compatible with the following Humminbird(R) fish finders, Apex Series, XPLORE Series, SOLIX Series, and HELIX G4N Models.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis Humminbird NMEA 2000 GPS Heading Sensor can be connected to a conventional NMEA 2000 network or connected directly to a compatible NMEA 2000 capable fish finder with the Direct NMEA 2000 included cable to provide GPS location and heading while still or moving. This NMEA 2000 accessory is compatible with the APEX Series, XPLORE Series, SOLIX Series, and HELIX G4N fish finders.\u003c\/p\u003e\u003cbr\u003e\u003cstrong\u003eWhat's in the Box:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e Sensor with dual-band GPS receiver, compass, and NMEA 2000(R) interface. \nCable length is 20 ft (6m)\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 direct cable\u003c\/li\u003e\n\u003cli\u003eSAE power cable\u003c\/li\u003e\n\u003cli\u003eStem\u003c\/li\u003e\n\u003cli\u003eHardware kit for stem or deck mounting\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Humminbird","offers":[{"title":"Default Title","offer_id":47441967480994,"sku":"HUM7300291","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/HUM7300291.jpg?v=1784398399"},{"product_id":"furuno-gp340-gnss-receiver","title":"Furuno GNSS Receiver MPN - GP340","description":"\u003cp\u003e\u003cstrong\u003eFuruno GP340 GNSS Receiver\u003c\/strong\u003e\u003c\/p\u003eModel: GP340\u003cbr\u003e\u003cp\u003eThe GP340 is a high performance GNSS Receiver designed for any type of vessel. Equipped with a powerful 75-channel GNSS core, this compact and cost-effective receiver offers extremely accurate position fixes, within 3 meters. The GP340 features a 10 hZ refresh rate and is capable of data output in either NMEA2000 or NMEA0183* formats, making it an ideal GPS sensor for use with NavNet or countless other systems that rely on high-precision GPS information for demanding maritime, industrial, and survey applications.\u003c\/p\u003e\u003cp\u003eThe GP340 supports SBAS, including WAAS, EGNOS, MSAS, and GAGAN. The sensor comes with all of the hardware required for deck- or mast-mounting solutions, and a 6-meter cable with NMEA2000 connector is supplied as standard. An optional NMEA0183 cable is also available.\u003c\/p\u003e\u003cp\u003e*NMEA0183 requires optional cable\u003c\/p\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eData Type\u003c\/th\u003e\n\u003ctd\u003e*NMEA0183 or NMEA2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReceiver Type\u003c\/th\u003e\n\u003ctd\u003eGPS or GLONASS or QZSS or SBAS or WAAS or Galileo or WAAS-GPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cbr\u003e\u003cstrong\u003eWhat's in the Box:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eGNSS Receiver\u003c\/li\u003e\n\u003cli\u003eMount base adapter\u003c\/li\u003e\n\u003cli\u003emount base adapter screws x 6\u003c\/li\u003e\n\u003cli\u003eCable side ecit adapter\u003c\/li\u003e\n\u003cli\u003eBracket Mopunt Screws x 3\u003c\/li\u003e\n\u003cli\u003eUser Manual\u003c\/li\u003e\n\u003cli\u003e6m NMEA 2000 Drop Cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":47441977540770,"sku":"FURGP340","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/FURGP340.jpg?v=1784398696"},{"product_id":"digital-navlink-blue-nmea2000-to-bluetooth-gateway","title":"Digital Navlink Blue NMEA2000 to Bluetooth gateway MPN - ZDIGNLINKBT","description":"\u003cp\u003e\u003cstrong\u003eDigital Navlink Blue NMEA2000 to Bluetooth gateway\u003c\/strong\u003e\u003c\/p\u003eModel: ZDIGNLINKBT\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eNMEA 2000 to BT server\u003c\/li\u003e\n\u003cli\u003eLinks NMEA 2000 data to BT devices such as phones and tablets\u003c\/li\u003e\n\u003cli\u003eEnables BT sensors to integrate with NMEA 2000 networks\u003c\/li\u003e\n\u003cli\u003eSDK available for developers looking to embed NMEA 2000 connectivity in their sensors or systems\u003c\/li\u003e\n\u003cli\u003eSelf powered from NMEA 2000 network and includes connection cable\u003c\/li\u003e\n\u003cli\u003eEasy wireless setup using just a browser\u003c\/li\u003e\n\u003cli\u003eSupports multiple connections\u003c\/li\u003e\n\u003cli\u003eCompatible with popular NMEA Remote app for iOS - turns your phone or iPad into a sophisticated instrument display\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNAVLink Blue is a new interfacing product from Digital Yacht, connecting BT devices such as phones, tablets and sensors to NMEA 2000 networks. It allows app developers for iOS and Android who support Bluetooth to take advantage of data that's available on the boat's NMEA 2000 backbone - for instance, GPS, AIS, instrument, engine or electrical information. The gateway is also bi-directional so Bluetooth sensor data can be communicated back to the NMEA 2000 system. This allows an interesting range of 3rd party sensors to connect to boat systems.\u003c\/p\u003e\u003cp\u003eNavLink Blue is self powered from the NMEA 2000 network so fits in seconds. It's also easy to pair with the other BT device. For developers, Digital Yacht publish a SDK on their Github site which opens up raw NMEA 2000 data to coders for 3rd party development.\u003c\/p\u003e\u003cp\u003eMany boaters may be happy utilising the existing and popular Digital Yacht NAVLink WiFi gateway which works with apps like Navionics, AquaMaps, TZ iBoat, etc. and provides data for AIS, instrument and GPS overlays. However, Bluetooth brings a new range of low power connectivity options to your on board NMEA 2000 network and the ability to integrate interesting sensors too.\u003c\/p\u003e\u003cp\u003eThe popular NMEA Remote app already supports NAVLink Blue, transforming an iPad into a full function, highly configurable instrument display.\u003c\/p\u003e\u003cbr\u003e\u003cstrong\u003eWhat's in the Box:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eNAVLink Blue gateway\u003c\/li\u003e\n\u003cli\u003e1m NMEA2000 drop cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":47441977704610,"sku":"DIYZDIGNLINKBT","price":309.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGNLINKBT.jpg?v=1784398701"},{"product_id":"fusion-ms-nrx300-wired-remote-for-nmea-2000-network","title":"Fusion MS-NRX300 Wired Remote for NMEA 2000 Network MPN - 010-01628-04","description":"\u003cp\u003e\u003cstrong\u003eFusion MS-NRX300 Wired Remote for NMEA 2000 Network\u003c\/strong\u003e\u003c\/p\u003eModel: 010-01628-04\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eThe optically bonded monochrome LCD allows for easy navigation.\u003c\/li\u003e\n\u003cli\u003eQuick and simple to install with plug-and-play setup.\u003c\/li\u003e\n\u003cli\u003eInstall with a conventional flush mount or integrate into the helm with a premium flat finish.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBuilt on the True-Marine design philosophy from Fusion, the NRX300 black wired remote is IPX7 rated and has been tested to a high level of protection against salt fog, temperature, vibration and UV.\u003c\/p\u003e\u003cp\u003eConnect the NRX300 black wired remote to your boat's existing NMEA 2000 network and display data from your compatible marine electronics including wind data, depth, speed, heading, position, ETA and water temperature.\u003c\/p\u003e\u003cp\u003eThe NRX300 black wired remote can control up to 4 audio zones1 on board your boat with localized volume control and global source selection - allowing you to customize your onboard audio entertainment experience.\u003c\/p\u003e\u003cbr\u003e\u003cstrong\u003eWhat's in the Box:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eFusion NRX300 black wired remote\u003c\/li\u003e\n\u003cli\u003eMounting gasket\u003c\/li\u003e\n\u003cli\u003eFour 8-gauge, self-tapping screws\u003c\/li\u003e\n\u003cli\u003eTwo screw covers\u003c\/li\u003e\n\u003cli\u003e20 ft (6 meter) drop cable for the NMEA 2000 network\u003c\/li\u003e\n\u003cli\u003eT-connector for the NMEA 2000 network\u003c\/li\u003e\n\u003cli\u003eDust cover\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fusion Electronics","offers":[{"title":"Default Title","offer_id":47441987502242,"sku":"FUS0100162804","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/FUS0100162804.jpg?v=1784398780"},{"product_id":"digital-yacht-velink-victron-ble-to-nmea2000-interface","title":"Digital Yacht VELINK Victron BLE to NMEA2000 Interface MPN - ZDIGVELINK","description":"\u003cp\u003e\u003cstrong\u003eDigital Yacht VELINK Victron BLE to NMEA2000 Interface\u003c\/strong\u003e\u003c\/p\u003eModel: ZDIGVELINK\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eConnects Victron Bluetooth devices to the NMEA 2000 network\u003c\/li\u003e\n\u003cli\u003eConnect up to 8 Victron devices simultaneously\u003c\/li\u003e\n\u003cli\u003eDirect conversion to the NMEA2000 network\u003c\/li\u003e\n\u003cli\u003eAvailable data: voltage, current, SOC, temperature, alarms, state of charge\u003c\/li\u003e\n\u003cli\u003eDisplay on MFDs and multifunction displays with NMEA2000 interface - no app or phone required\u003c\/li\u003e\n\u003cli\u003eNo additional wiring on the Victron side\u003c\/li\u003e\n\u003cli\u003eFully compatible with all SmartShunt and BMV-712 Smart models, MPPT BlueSolar \/ SmartSolar solar chargers, 220 V Blue Smart Chargers, as well as Orion-TR Smart converters.\u003c\/li\u003e\n\u003cli\u003ePowered by the NMEA 2000 network\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; play installation\u003c\/li\u003e\n\u003cli\u003eDesigned for continuous onboard operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eveLink allows you to wirelessly connect up to eight Victron devices equipped with a Bluetooth interface to your NMEA 2000 network, covering the vast majority of installations.\u003c\/p\u003e\u003cp\u003eveLink enables the retrieval of essential data from Victron battery monitors (SmartShunt, BMV, etc.) on multifunction displays and chartplotters connected to the NMEA 2000 network: current consumption, battery voltage, service and engine battery status, as well as remaining autonomy\/SOC displayed on chartplotters.\u003c\/p\u003e\u003cp\u003eveLink also provides information from a compatible shore power charger to accurately monitor the batteries' charge current. The charger may often be installed in an inaccessible area so this wireless device makes monitoring easy\u003c\/p\u003e\u003cp\u003eSimilarly, it retrieves data from MPPT solar regulators, allowing real-time visualization of solar input and panel exposure.\u003c\/p\u003e\u003cp\u003eFor installations equipped with an Orion DC\/DC converter, veLink displays the actual power being delivered by say, the alternator a service battery.\u003c\/p\u003e\u003cp\u003eveLink centralizes alarms from all these Victron devices allowing you to be immediately notified on your chartplotter or multi-function display in case of an issue, even without a smartphone.\u003c\/p\u003e\u003cp\u003eIt is also possible to customize the names of all devices on the NMEA2000 network, for example: engine battery, service battery, windlass battery, starboard solar panel, etc.\u003c\/p\u003e\u003cp\u003eYou can configure the veLINK by accessing its web interface. The Victron device configuration page allows you to scan for and connect to devices using the connection key available in the Victron Connect mobile app.\u003c\/p\u003e\u003cp\u003eDuring configuration, you can choose the name of your device as it will appear on the NMEA network, allowing you to personalize each device. You can also assign different instances to distinguish multiple devices of the same type and select the NMEA 2000 data to be sent over the network, such as battery status, detailed DC status, or charger status.\u003c\/p\u003e\u003cp\u003eAlarms configured in the Victron Connect app can also be transmitted to the NMEA 2000 network to be displayed on compatible devices, such as GARMIN chartplotters. Additionally, a specific alert is triggered if a device disconnects for more than 30 seconds.\u003c\/p\u003e\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e105 × 72 × 32 mm\u003c\/td\u003e\n\u003c\/tr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's in the Box:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eveLink - Victron BT to NMEA 2000\u003c\/li\u003e\n\u003cli\u003e1m drop cable with male M12 Device\u003c\/li\u003e\n\u003cli\u003eWiFi antenna built-in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":47441988649122,"sku":"DIYZDIGVELINK","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGVELINK.jpg?v=1784398821"},{"product_id":"digital-bilge-iq-bilge-pump-controller-and-monitor","title":"Digital BILGE IQ Bilge Pump Controller and Monitor MPN - ZDIGBILGEIQ","description":"\u003cp\u003e\u003cstrong\u003eDigital BILGE IQ Bilge Pump Controller and Monitor\u003c\/strong\u003e\u003c\/p\u003eModel: ZDIGBILGEIQ\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eControl and monitor your bilge pump with NMEA 2000 \n(MFD compatible) and wireless interfaces\u003c\/li\u003e\n\u003cli\u003eWireless interface for phone and tablet connectivity\u003c\/li\u003e\n\u003cli\u003eWorks with any pump or switch arrangement\u003c\/li\u003e\n\u003cli\u003eMonitors actual current draw of pump to confirm \ncorrect operation\u003c\/li\u003e\n\u003cli\u003eCompatible with Victron Cerbo GX systems for control \nand cloud monitoring\u003c\/li\u003e\n\u003cli\u003eOptimise replacement of bilge water discharge filters \nwith true running time and flow rates\u003c\/li\u003e\n\u003cli\u003eOptional additional float switch for high level water \nalarm\u003c\/li\u003e\n\u003cli\u003eFail safe operation always allows for manual over-ride\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA humble electric bilge pump is installed on just about \nevery boat but boat owners don't know much about its \noperation and run times - or even if it is still functional. \nBilge iQ from Digital Yacht aims to change this and brings \nthe latest NMEA 2000 and wifi monitoring plus switching \ncontrol technology to any electric bilge pump.\u003c\/p\u003e\u003cp\u003eBilge iQ fits in minutes to existing systems which may \nincorporate a standard ON-OFF-AUTO panel (with an \nintegrated float switch) or to any manual system.\u003c\/p\u003e\u003cp\u003eIt also connects to the boats NMEA 2000 network so the \nmulti function display can use a standard switching \ncommand to turn the pump on and off and also display \nthe pump's status or fault based on an industry standard \nNMEA 2000 pop up alert. It also integrates with \nVictron's Cerbo GX systems and VRM cloud monitoring \nsolution.\u003c\/p\u003e\u003cp\u003ePlus! It has a wireless interface enabling a phone or \ntablet to connect and display a history of pump \noperations. Actual current draw of the pump is also \ndisplayed in real time to show the pump is operating \ncorrectly. Standard alerts allow for remote monitoring \ntoo.\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":47441989828770,"sku":"DIYZDIGBILGEIQ","price":329.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGBILGEIQ.jpg?v=1784398857"},{"product_id":"digital-yacht-envirolink-nmea2000-temperature-hummidity-pressure-sensor","title":"Digital Yacht ENVIROLINK NMEA2000 Temperature Hummidity Pressure Sensor MPN - ZDIGENVLINK","description":"\u003cp\u003e\u003cstrong\u003eDigital Yacht ENVIROLINK NMEA2000 Temperature Hummidity Pressure Sensor\u003c\/strong\u003e\u003c\/p\u003eModel: ZDIGENVLINK\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eHigh-precision barometric, temperature and humidity sensors\u003c\/li\u003e\n\u003cli\u003eReliable and independent onboard weather monitoring system\u003c\/li\u003e\n\u003cli\u003eDisplay weather data on NMEA 2000 MFDs \u0026amp; chartplotters\u003c\/li\u003e\n\u003cli\u003eBuilt-in web interface to view data in real time\u003c\/li\u003e\n\u003cli\u003eMeasurement history and trend analysis over 96 hours\u003c\/li\u003e\n\u003cli\u003eData export in CSV format\u003c\/li\u003e\n\u003cli\u003eTransmits the following NMEA 2000 PGNs: 130313 (Humidity), 130314 (Actual Pressure), 130316 (Temperature, Extended), and 130311 (Environmental Parameters — deprecated)\u003c\/li\u003e\n\u003cli\u003eIf wind data is available on the NMEA 2000 network (PGN 130306), wind data is displayed in the web interface\u003c\/li\u003e\n\u003cli\u003eDesigned for continuous onboard operation (no internet required)\u003c\/li\u003e\n\u003cli\u003ePowered by the NMEA 2000 network\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; play installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEnviroLink is a smart NMEA 2000 environmental sensor integrating high-precision barometric, temperature and humidity sensors. EnviroLink is a NMEA 2000 barometer and marine weather station designed for sailors who want accurate, real-time insight into local weather conditions directly on board.\u003c\/p\u003e\u003cp\u003eEnviroLink continuously measures atmospheric pressure, ambient temperature and relative humidity, then broadcasts this data instantly to your multifunction displays and chartplotters connected to the NMEA 2000 network.\u003c\/p\u003e\u003cp\u003eMore than a simple sensor, EnviroLink becomes a true onboard weather station.\u003c\/p\u003e\u003cp\u003eReal-Time Monitoring \u0026amp; Historical Weather Data: Thanks to its integrated built-in web interface, all measurements can be viewed in real time from a smartphone, tablet or computer connected to the EnviroLink’s Wi-Fi network.\u003c\/p\u003e\u003cp\u003eClear and intuitive graphs show how pressure, temperature and humidity evolve over time, making it easy to identify trends over the last minutes or days. The system automatically calculates barometric tendencies, helping you anticipate approaching weather changes and make safer navigation decisions.\u003c\/p\u003e\u003cp\u003eEnviroLink stores all data locally and works completely autonomously, without any cloud service or Internet connection. Historical records can be downloaded at any time in CSV format for later analysis or for keeping a personal onboard weather log. Whether you are cruising, racing or navigating offshore, you always have access to your own local weather history.\u003c\/p\u003e\u003cp\u003eHigh-Precision Sensors for Independent Weather Monitoring: The high-precision barometric sensor measures atmospheric pressure from 300 to 1100 hPa with excellent resolution and accuracy, while the temperature and humidity sensors provide reliable readings across a wide range of marine conditions.\u003c\/p\u003e\u003cp\u003eBy continuously monitoring pressure variations, thermal evolution and humidity levels, EnviroLink helps detect approaching weather fronts, anticipate deteriorating conditions and complement external forecasts with precise, real-time local data.\u003c\/p\u003e\u003cp\u003eIntegrated Wind Data Visualization: EnviroLink is primarily a barometer and NMEA 2000 weather station that continuously measures atmospheric pressure, temperature, and humidity, and displays this data via its built-in web interface.\u003c\/p\u003e\u003cp\u003eHowever, if the NMEA 2000 network also includes wind data from a wind vane\/anemometer, this information can be used by the web interface to display wind speed and wind direction in addition to the other meteorological parameters.\u003c\/p\u003e\u003cp\u003eThis makes EnviroLink a very practical tool not only for navigation, but also for use as a land-based weather station, as you can locally view all weather data from the last 96 hours, including wind data, on a smartphone, tablet, or PC connected to the EnviroLink’s Wi-Fi network, without requiring an Internet connection.\u003c\/p\u003e\u003cp\u003eOPERATION: EnviroLink features a built-in web interface that can be accessed from any smartphone, tablet or computer connected to the local network. The interface displays real-time measurements and provides configurable trend graphs over 10 minutes, 24 hours, 48 and 96 hours, allowing you to easily monitor changing conditions.\u003c\/p\u003e\u003cp\u003eIt automatically calculates the barometric, temperature and humidity rate of change, supports time-zone selection, synchronizes all data with local time, and allows historical weather data to be downloaded in CSV format for analysis and record keeping.\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":47441991008418,"sku":"DIYZDIGENVLINK","price":269.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGENVLINK_001.jpg?v=1784398891"},{"product_id":"digital-yacht-ikreate-nmea2000-simulator","title":"Digital Yacht IKREATE NMEA2000 Simulator MPN - ZDIGIKREATE","description":"\u003cp\u003e\u003cstrong\u003eDigital Yacht IKREATE NMEA2000 Simulator\u003c\/strong\u003e\u003c\/p\u003eModel: ZDIGIKREATE\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eCreate individual NMEA 2000 PGNs from drop down list populated with the data you enter or play back a NMEA 2000 log file captured by a Digital Yacht NMEA 2000 product etc from an on-board system\u003c\/li\u003e\n\u003cli\u003eMultiple PGN groups can be created and even saved for future use\u003c\/li\u003e\n\u003cli\u003eData variance function can synthesise changing values\u003c\/li\u003e\n\u003cli\u003eNo complicated software to install - just a simple file for Chrome, Edge, Opera or Chromium\u003c\/li\u003e\n\u003cli\u003eFunctions on PC, MAC and Linux platforms - simple USB connection\u003c\/li\u003e\n\u003cli\u003eSet SRC address and instance\u003c\/li\u003e\n\u003cli\u003eIntegrated 0.8m NMEA 2000 and 0.8m USB cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor anyone involved in designing, manufacturing or installing marine electronics, the ability to simulate or replay NMEA2000 data is a real advantage and can accelerate software development, demonstrate NMEA2000 devices or help diagnose network issues.\u003c\/p\u003e\u003cp\u003eWith more and more modern boats having an NMEA2000 network at the heart of their navigation system, it is really important that you have the tools to investigate the devices and data on the network should things not work as planned.\u003c\/p\u003e\u003cp\u003eConsisting of a new iKreate USB interface and an HTML5 based web app, the iKreate simulator can generate any number of NMEA2000 PGNs or replay saved log files of real life network data from any NMEA2000 system, regardless of brand.\u003c\/p\u003e\u003cp\u003eJust like our NMEA2000 Display App, our new iKreate SImulator takes a new approach and is the World's first multi-platform, browser based NMEA2000 Simulator App that will run on Windows, LINUX, Mac OSX and Raspbian. There is no installation and if you can save a file and find it again, then that is as complex as it gets with just a single HTML5 file to worry about (less than 0.5MB in size).\u003c\/p\u003e\u003cp\u003eYou need to use the app with a browser that supports the Web Serial API, which currently includes Chrome, Chromium, MS Edge and Opera. We also plan to support Firefox going forward (with its WebSerial Extension) but this was not possible for the first release of the app.\u003c\/p\u003e\u003cbr\u003e\u003cstrong\u003eWhat's in the Box:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eiKreate USB Interface\u003c\/li\u003e\n\u003cli\u003eSoftware to download via link\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":47441997004962,"sku":"DIYZDIGIKREATE","price":329.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGIKREATE.jpg?v=1784399057"},{"product_id":"maretron-m-power-clmd12-dc-load-module-12-channel-n2k-without-connectors","title":"Maretron M-Power DC Load Module 12 Channel N2K without Connectors MPN - CLMD12","description":"\u003cp\u003e\u003cstrong\u003eMaretron M-Power CLMD12 DC Load Module 12 Channel N2K without Connectors\u003c\/strong\u003e\u003c\/p\u003eModel: CLMD12\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eNMEA 2000(R) Interface\u003c\/li\u003e\n\u003cli\u003eIP67 Rated\u003c\/li\u003e\n\u003cli\u003eIgnition Protected\u003c\/li\u003e\n\u003cli\u003eOpto-isolated from NMEA 2000(R), eliminating potential ground loops\u003c\/li\u003e\n\u003cli\u003eTwelve (12) dimmable Electronic Circuit Breakers (ECBs) for On\/Off Control over NMEA 2000(R) network\u003c\/li\u003e\n\u003cli\u003eIndividual breaker electrical current monitoring\u003c\/li\u003e\n\u003cli\u003eBreakers can have Power-Up states defined (ON, OFF or PREVIOUS STATE)\u003c\/li\u003e\n\u003cli\u003eBreakers can be Locked against inadvertent actuation.\u003c\/li\u003e\n\u003cli\u003eSeven (7) discrete inputs configurable as Active High or Active Low\u003c\/li\u003e\n\u003cli\u003eAutomatic ECB overcurrent shutdown\u003c\/li\u003e\n\u003cli\u003eAutomatic ECB thermal shutdown (Overtemperature Protection)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDesigned for vessels of all sizes with smaller loads, the MPower(R) CLMD12 is a compact 12-Channel DC Load Controller Module. Two of the 12 breakers handle a maximum of 12 amps, six handle a maximum of 10 amps and four handle a maximum of 5 amps with a total current capacity of 75 Amps. Additionally, circuits can be paralleled.\u003c\/p\u003e\u003cp\u003eIf a smaller circuit needs to be protected, each of the 12 breakers can be set to trip at lower current levels using the new Maretron N2KAnalyzer(R) V3 software. In addition, the CLMD12 has inputs for up to 7 hard-wired switches that can be used to switch breaker states, or as inputs for other data such as bilge alarms or hatch positions, etc.\u003c\/p\u003e\u003cp\u003eThe CLMD12 handles many DC load types such as lights pumps, motors, and electronics. An added benefit of the CLMD12 is that it reports the current through each of the 12 breakers. This allows you to determine if loads are drawing too much or too little electrical current. This information can be used to report overcurrent faults and under-current conditions such as burnt-out bulbs.\u003c\/p\u003e\u003cp\u003eFor manual control of the loads, an optional MPower 12-Channel Bypass Module (CBMD12) can be installed in conjunction with the CLMD12.\u003c\/p\u003e","brand":"Maretron","offers":[{"title":"Default Title","offer_id":47442011521186,"sku":"MARCLMD12","price":695.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/MARCLMD12_001.jpg?v=1784399483"},{"product_id":"maretron-m-power-clmd12r-dc-load-module-12-channel-n2k-with-j1-and-j2-connectors","title":"Maretron M-Power CLMD12R DC Load Module 12-Channel N2K with j1 and J2 Connectors MPN - CLMD12-R","description":"\u003cp\u003e\u003cstrong\u003eMaretron M-Power CLMD12R DC Load Module 12-Channel N2K with j1 and J2 Connectors\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CLMD12-R\u003c\/p\u003eModel: CLMD12R\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eNMEA 2000(R) Interface\u003c\/li\u003e\n\u003cli\u003eIP67 Rated\u003c\/li\u003e\n\u003cli\u003eIgnition Protected\u003c\/li\u003e\n\u003cli\u003eOpto-isolated from NMEA 2000(R), eliminating potential ground loops\u003c\/li\u003e\n\u003cli\u003eTwelve (12) dimmable Electronic Circuit Breakers (ECBs) for On\/Off Control over NMEA 2000(R) network\u003c\/li\u003e\n\u003cli\u003eIndividual breaker electrical current monitoring\u003c\/li\u003e\n\u003cli\u003eBreakers can have Power-Up states defined (ON, OFF or PREVIOUS STATE)\u003c\/li\u003e\n\u003cli\u003eBreakers can be Locked against inadvertent actuation.\u003c\/li\u003e\n\u003cli\u003eSeven (7) discrete inputs configurable as Active High or Active Low\u003c\/li\u003e\n\u003cli\u003eAutomatic ECB overcurrent shutdown\u003c\/li\u003e\n\u003cli\u003eAutomatic ECB thermal shutdown (Overtemperature Protection)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDesigned for vessels of all sizes with smaller loads, the MPower(R) CLMD12 is a compact 12-Channel DC Load Controller Module. Two of the 12 breakers handle a maximum of 12 amps, six handle a maximum of 10 amps and four handle a maximum of 5 amps with a total current capacity of 75 Amps. Additionally, circuits can be paralleled.\u003c\/p\u003e\u003cp\u003eIf a smaller circuit needs to be protected, each of the 12 breakers can be set to trip at lower current levels using the new Maretron N2KAnalyzer(R) V3 software. In addition, the CLMD12 has inputs for up to 7 hard-wired switches that can be used to switch breaker states, or as inputs for other data such as bilge alarms or hatch positions, etc.\u003c\/p\u003e\u003cp\u003eThe CLMD12 handles many DC load types such as lights pumps, motors, and electronics. An added benefit of the CLMD12 is that it reports the current through each of the 12 breakers. This allows you to determine if loads are drawing too much or too little electrical current. This information can be used to report overcurrent faults and under-current conditions such as burnt-out bulbs.\u003c\/p\u003e\u003cbr\u003e\u003cstrong\u003eWhat's in the Box:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eCLMD12 Load Module with a 12 pigtail adapter cable for both the J1 and J2 connectors\u003c\/li\u003e\"\u003c\/ul\u003e","brand":"Maretron","offers":[{"title":"Default Title","offer_id":47442012668066,"sku":"MARCLMD12R","price":795.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/MARCLMD12R_001.jpg?v=1784399517"},{"product_id":"maretron-m-power-clmd16-dc-load-module-16-channel-n2k-without-connectors","title":"Maretron M-Power DC Load Module 16 Channel N2K without Connectors MPN - CLMD16","description":"\u003cp\u003e\u003cstrong\u003eMaretron M-Power CLMD16 DC Load Module 16 Channel N2K without Connectors\u003c\/strong\u003e\u003c\/p\u003eModel: CLMD16\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eNMEA 2000(R) Interface\u003c\/li\u003e\n\u003cli\u003eIP67 Rated\u003c\/li\u003e\n\u003cli\u003eIgnition Protected\u003c\/li\u003e\n\u003cli\u003eOpto-isolated from NMEA 2000(R), eliminating potential ground loops\u003c\/li\u003e\n\u003cli\u003eSixteen (16) dimmable Electronic Circuit Breakers (ECBs) for On\/Off Control over NMEA 2000(R) network\u003c\/li\u003e\n\u003cli\u003eIndividual breaker electrical current monitoring\u003c\/li\u003e\n\u003cli\u003eBreakers can have Power-Up states defined (ON, OFF or previous states)\u003c\/li\u003e\n\u003cli\u003eBreakers can be Locked against inadvertent actuation.\u003c\/li\u003e\n\u003cli\u003eCapacitive touch switches for local control of all loads\u003c\/li\u003e\n\u003cli\u003eAll inputs and outputs protected against short to Power and short to Ground\u003c\/li\u003e\n\u003cli\u003eAutomatic ECB overcurrent shutdown\u003c\/li\u003e\n\u003cli\u003eAutomatic ECB thermal shutdown (Overtemperature Protection)\u003c\/li\u003e\n\u003cli\u003eEight (8) discrete digital input channels capable of sensing +ve or ground signals\u003c\/li\u003e\n\u003cli\u003eTwo (2) resistive analog input channels\u003c\/li\u003e\n\u003cli\u003eOne (1) 4-20mA current loop input channel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor larger breakers and more circuits, the MPower(R) CLMD16 is a 16-Channel DC Load Controller Module. Four of the 16 breakers handle a maximum of 25 amps and twelve breakers handle a maximum of 12 amps with a total current capacity of 125 Amps. Additionally, circuits can be paralleled.\u003c\/p\u003e\u003cp\u003eThe CLMD16 also supports two H-Bridge reversing polarity circuits that can be used for loads such as engine hatches, passerelles, trim tabs, etc. The CLMD16 has 8 inputs for hard-wired switches that can be used to switch breaker states, or as inputs for other data such as bilge alarms or hatch positions, etc. There are 3 inputs capable of monitoring tank levels.\u003c\/p\u003e\u003cp\u003eThe CLMD16 handles many DC load types such as lights, pumps, motors, and electronics. An added benefit of the CLMD16 is that it reports the current through each of the 16 breakers. This allows you to determine if loads are drawing too much or too little electrical current. This information can be used to report overcurrent faults and under-current conditions such as burnt-out bulbs.\u003c\/p\u003e","brand":"Maretron","offers":[{"title":"Default Title","offer_id":47442012766370,"sku":"MARCLMD16","price":1600.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/MARCLMD16_001.jpg?v=1784399521"},{"product_id":"maretron-m-power-clmd16-r-dc-load-module-28-channel-n2k","title":"Maretron M-Power DC Load Module 28 Channel N2K MPN - CLMD16-R","description":"\u003cp\u003e\u003cstrong\u003eMaretron M-Power CLMD16-R DC Load Module 28 Channel N2K\u003c\/strong\u003e\u003c\/p\u003eModel: CLMD16-R\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eNMEA 2000(R) Interface\u003c\/li\u003e\n\u003cli\u003eIP67 Rated\u003c\/li\u003e\n\u003cli\u003eIgnition Protected\u003c\/li\u003e\n\u003cli\u003eOpto-isolated from NMEA 2000(R), eliminating potential ground loops\u003c\/li\u003e\n\u003cli\u003eSixteen (16) dimmable Electronic Circuit Breakers (ECBs) for On\/Off Control over NMEA 2000(R) network. 4 breakers capable of carrying up to 25 Amps. 12 breakers capable of carrying up to 12 Amps\u003c\/li\u003e\n\u003cli\u003eIndividual breaker electrical current monitoring\u003c\/li\u003e\n\u003cli\u003eBreakers can have Power-Up states defined (ON, OFF or previous states)\u003c\/li\u003e\n\u003cli\u003eBreakers can be Locked against inadvertent actuation.\u003c\/li\u003e\n\u003cli\u003eCapacitive touch switches for local control of all loads\u003c\/li\u003e\n\u003cli\u003eAll inputs and outputs protected against short to Power and short to Ground\u003c\/li\u003e\n\u003cli\u003eAutomatic ECB overcurrent shutdown\u003c\/li\u003e\n\u003cli\u003eAutomatic ECB thermal shutdown (Overtemperature Protection)\u003c\/li\u003e\n\u003cli\u003eEight (8) discrete digital input channels capable of sensing +ve or ground signals\u003c\/li\u003e\n\u003cli\u003eTwo (2) resistive analog input channels\u003c\/li\u003e\n\u003cli\u003eOne (1) 4-20mA current loop input channel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor larger breakers and more circuits, the MPower(R) CLMD16 is a 16-Channel DC Load Controller Module. Four of the 16 breakers handle a maximum of 25 amps and twelve breakers handle a maximum of 12 amps with a total current capacity of 125 Amps. Additionally, circuits can be paralleled.\u003c\/p\u003e\u003cp\u003eThe CLMD16 also supports two H-Bridge reversing polarity circuits that can be used for loads such as engine hatches, passerelles, trim tabs, etc. The CLMD16 has 8 inputs for hard-wired switches that can be used to switch breaker states, or as inputs for other data such as bilge alarms or hatch positions, etc. There are 3 inputs capable of monitoring tank levels.\u003c\/p\u003e\u003cp\u003eThe CLMD16 handles many DC load types such as lights, pumps, motors, and electronics. An added benefit of the CLMD16 is that it reports the current through each of the 16 breakers. This allows you to determine if loads are drawing too much or too little electrical current. This information can be used to report overcurrent faults and under-current conditions such as burnt-out bulbs.\u003c\/p\u003e\u003cp\u003eRemote control of navigation lights and boarding lights. Control of area lights with dimming. Burnt out bulb alerts.\u003c\/p\u003e\u003cbr\u003e\u003cstrong\u003eWhat's in the Box:\u003c\/strong\u003e\u003cul\u003e\u003cli\u003eCLMD16 Load Module with a 1m mating connector for both the J1 and J2 connectors and a 1m I\/O harness kit for the J3 connector.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Maretron","offers":[{"title":"Default Title","offer_id":47442013454498,"sku":"MARCLMD16R","price":1750.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/MARCLMD16R_001.jpg?v=1784399542"},{"product_id":"maretron-m-power-rkf-001-remote-key-fob","title":"Maretron M-Power Remote Key FOB MPN - RKF-001","description":"\u003cp\u003e\u003cstrong\u003eMaretron M-Power RKF-001 Remote Key FOB\u003c\/strong\u003e\u003c\/p\u003eModel: RKF-001\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eFM Remote Control System for reliable operation.\u003c\/li\u003e\n\u003cli\u003eKeeloqTM- High Security protocol for enhanced protection.\u003c\/li\u003e\n\u003cli\u003eOperating range of up to 60 meters for extended reach.\u003c\/li\u003e\n\u003cli\u003eAvailable in 1-4 button versions to suit different requirements.\u003c\/li\u003e\n\u003cli\u003eWaterproof transmitter with an IP68 rating for durability.\u003c\/li\u003e\n\u003cli\u003eFlexible power options: 12 or 24Vdc Supply.\u003c\/li\u003e\n\u003cli\u003eEasy Learn functionality allows integration of up to 7 transmitters.\u003c\/li\u003e\n\u003cli\u003eConvenient installation through screw terminals.\u003c\/li\u003e\n\u003cli\u003eRelay Changeover Outputs with a capacity of 5A @ 230Vac.\u003c\/li\u003e\n\u003cli\u003eChoose between Momentary or Latching Outputs for customized control.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe RKF-001 Remote Key Fob is a secure and versatile remote control designed for general use analog wireless remote control. The system employs the Keeloq code-hopping protocol, ensuring a high level of security.\u003c\/p\u003e\u003cp\u003eInstallation is hassle-free, with the receiver easily connected using standard 'screw terminals.' The receiver operates on 12 or 24Vdc power and can switch up to 5A at 230Vac. The outputs can be configured for either 'momentary' or 'latching' operation, providing flexibility based on your specific needs.\u003c\/p\u003e\u003cp\u003eThe RKF-001 is delivered ready for use, and additional transmitters can be effortlessly added to the system. Experience a reliable and secure remote control solution that is built to simplify your operational needs.\u003c\/p\u003e","brand":"Maretron","offers":[{"title":"Default Title","offer_id":47442013552802,"sku":"MARRKF001","price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/MARRKF001.jpg?v=1784399545"},{"product_id":"maretron-m-power-a3703-ckm-n2k-adapter-cable-0-2m","title":"Maretron M-Power CKM N2K Adapter Cable 0.2m MPN - A3703","description":"\u003cp\u003e\u003cstrong\u003eMaretron M-Power A3703 CKM N2K Adapter Cable 0.2m\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMaretron M-Power A3703 CKM N2K Adapter Cable 0.2m is a nmea 2000 sensors product from Maretron. Review the verified identifiers and available product details below to confirm suitability for your intended application.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Maretron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Electrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e A3703\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e MARA3703\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC \/ GTIN:\u003c\/strong\u003e 873804004150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNMEA 2000(R) Pigtail (0.2m)\u003c\/p\u003e\u003cp\u003eConfirm dimensions, voltage, connector type, and equipment compatibility before ordering when those details apply.\u003c\/p\u003e","brand":"Maretron","offers":[{"title":"Default Title","offer_id":47442019090594,"sku":"MARA3703","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/MARA3703.jpg?v=1784399650"},{"product_id":"maretron-m-power-a3706-j1-output-mating-connector-with-0-3m-leads","title":"Maretron M-Power J1 Output Mating Connector with 0.3m Leads MPN - A3706","description":"\u003cp\u003e\u003cstrong\u003eMaretron M-Power A3706 J1 Output Mating Connector with 0.3m Leads\u003c\/strong\u003e\u003c\/p\u003eModel: A3706\u003cbr\u003e\u003cp\u003eOutput (J1) Mating Connector with 12 flying leads\u003c\/p\u003e\"","brand":"Maretron","offers":[{"title":"Default Title","offer_id":47442019188898,"sku":"MARA3706","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/MARA3706.jpg?v=1784399653"},{"product_id":"maretron-m-power-a3707-j2-input-mating-connector-with-0-3m-leads","title":"Maretron M-Power J2 Input Mating Connector with 0.3m Leads MPN - A3707","description":"\u003cp\u003e\u003cstrong\u003eMaretron M-Power A3707 J2 Input Mating Connector with 0.3m Leads\u003c\/strong\u003e\u003c\/p\u003eModel: A3707\u003cbr\u003e\u003cp\u003eInput (J2) Mating Connector with 12 flying leads\u003c\/p\u003e\"","brand":"Maretron","offers":[{"title":"Default Title","offer_id":47442019221666,"sku":"MARA3707","price":70.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/MARA3707.jpg?v=1784399653"},{"product_id":"maretron-m-power-a3708-j2-output-mating-connector-with-1m-leads","title":"Maretron M-Power J2 Output Mating Connector with 1m Leads MPN - A3708","description":"\u003cp\u003e\u003cstrong\u003eMaretron M-Power A3708 J2 Output Mating Connector with 1m Leads\u003c\/strong\u003e\u003c\/p\u003eModel: A3708\u003cbr\u003e\u003cp\u003eOutput (J2) Mating Connector with 1m Flying Leads\u003c\/p\u003e","brand":"Maretron","offers":[{"title":"Default Title","offer_id":47442019352738,"sku":"MARA3708","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/MARA3708.jpg?v=1784399656"},{"product_id":"maretron-m-power-a3709-j1-output-mating-connector-with-1m-leads","title":"Maretron M-Power J1 Output Mating Connector with 1m Leads MPN - A3709","description":"\u003cp\u003e\u003cstrong\u003eMaretron M-Power A3709 J1 Output Mating Connector with 1m Leads\u003c\/strong\u003e\u003c\/p\u003eModel: A3709\u003cbr\u003e\u003cp\u003eOutput (J1) Mating Connector with 1m Flying Leads\u003c\/p\u003e","brand":"Maretron","offers":[{"title":"Default Title","offer_id":47442019319970,"sku":"MARA3709","price":58.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/MARA3709.jpg?v=1784399657"},{"product_id":"maretron-m-power-a3710-j3-i-o-matting-connector-kit","title":"Maretron M-Power J3 I\/O Matting Connector Kit MPN - A3710","description":"\u003cp\u003e\u003cstrong\u003eMaretron M-Power A3710 J3 I\/O Matting Connector Kit\u003c\/strong\u003e\u003c\/p\u003eModel: A3710\u003cbr\u003e\u003cp\u003eJ3 (I\/O Gen Purpose) Harness Kit with 1m Flying Leads\u003c\/p\u003e","brand":"Maretron","offers":[{"title":"Default Title","offer_id":47442019451042,"sku":"MARA3710","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/MARA3710.jpg?v=1784399660"},{"product_id":"maretron-m-power-a3720-bypass-module-jumper-wire-with-lugs-6-awg-red","title":"Maretron M-Power Bypass Module Jumper Wire with Lugs 6 AWG Red MPN - A3720","description":"\u003cp\u003e\u003cstrong\u003eMaretron M-Power A3720 Bypass Module Jumper Wire with Lugs 6 AWG Red\u003c\/strong\u003e\u003c\/p\u003eModel: A3720\u003cbr\u003e\u003cp\u003eA3720 Bypass Module Jumper Wire with Lugs, 6AWG, Red\u003c\/p\u003e","brand":"Maretron","offers":[{"title":"Default Title","offer_id":47442020532386,"sku":"MARA3720","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/MARA3720.jpg?v=1784399696"},{"product_id":"maretron-m-power-a3721-fuse-kit","title":"Maretron M-Power Fuse Kit MPN - A3721","description":"\u003cp\u003e\u003cstrong\u003eMaretron M-Power A3721 Fuse Kit\u003c\/strong\u003e\u003c\/p\u003eModel: A3721\u003cbr\u003e\u003cp\u003eA3721 Bypass Module Fuse Pack (4 x 15A, 5 x 10A, 4 x 5A)\u003c\/p\u003e","brand":"Maretron","offers":[{"title":"Default Title","offer_id":47442020696226,"sku":"MARA3721","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/MARA3721.jpg?v=1784399700"},{"product_id":"maretron-m-power-cbmd12-bypass-module-12-circuit-n2k-without-fuse-pack-and-jumper-wire","title":"Maretron M-Power Bypass Module 12 Circuit N2K without Fuse Pack and Jumper Wire MPN - CBMD12","description":"\u003cp\u003e\u003cstrong\u003eMaretron M-Power CBMD12 Bypass Module 12 Circuit N2K without Fuse Pack and Jumper Wire\u003c\/strong\u003e\u003c\/p\u003eModel: CBMD12\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e75 Amps maximum current capacity\u003c\/li\u003e\n\u003cli\u003eOutputs: 12A Max (two outputs), 10A Max (six outputs), 5A Max (four outputs)\u003c\/li\u003e\n\u003cli\u003e12V and 24V DC power systems\u003c\/li\u003e\n\u003cli\u003eCarling Technologies Curvette(R) Rocker Switches\u003c\/li\u003e\n\u003cli\u003eOvercurrent protection via ATC standard fuses\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor manual control of the loads, an optional MPower(R) 12-Channel Bypass Module (CBMD12) can be installed in conjunction with the 12-Channel DC Load Controller Module (CLMD12). The maximum current capacity for the CBMD12 is 75 amps in 12V DC and 24V DC power systems.\u003c\/p\u003e\u003cp\u003eThe Bypass Module provides a manual method (ON\/OFF switch) to control loads by providing power to each load in case of a CLMD12 malfunction or a NMEA 2000(R) network failure. The CBMD12 utilizes standard fuses for overcurrent protection and 12 Carling Curvette(R) Rocker Switches for manual control of each load. With the use of the Curvette rocker switches, there is no arcing that occurs while manually overriding a load. Furthermore, unlike other digital switching products, MPower does not require moving a fuse which can cause electrical connections to degrade, or the possibility for ignition.\u003c\/p\u003e\u003cp\u003eIt's important to ensure that the current rating of the fuse for each load is appropriate to protect the load and the wiring for that load. Please note that the bypass module does not support paralleled outputs, since each circuit is controlled by a separate switch. Additionally, the bypass module does not support dimming of circuits.\u003c\/p\u003e","brand":"Maretron","offers":[{"title":"Default Title","offer_id":47442021417122,"sku":"MARCBMD12","price":235.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/MARCBMD12.jpg?v=1784399723"},{"product_id":"maretron-m-power-cbmd12-r-bypass-module-12-circuit-n2k-with-fuse-pack-and-jumper-wire","title":"Maretron M-Power Bypass Module 12 Circuit N2K with Fuse Pack and Jumper Wire MPN - CBMD12-R","description":"\u003cp\u003e\u003cstrong\u003eMaretron M-Power CBMD12-R Bypass Module 12 Circuit N2K with Fuse Pack and Jumper Wire\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBypass Module 12 Circuit N2K with Fuse Pack and Jumper Wire\u003c\/strong\u003e\u003c\/p\u003eModel: CBMD12-R\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e75 Amps maximum current capacity\u003c\/li\u003e\n\u003cli\u003eOutputs: 12A Max (two outputs), 10A Max (six outputs), 5A Max (four outputs)\u003c\/li\u003e\n\u003cli\u003e12V and 24V DC power systems\u003c\/li\u003e\n\u003cli\u003eCarling Technologies Curvette(R) Rocker Switches\u003c\/li\u003e\n\u003cli\u003eOvercurrent protection via ATC standard fuses\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor manual control of the loads, an optional MPower(R) 12-Channel Bypass Module (CBMD12) can be installed in conjunction with the 12-Channel DC Load Controller Module (CLMD12). The maximum current capacity for the CBMD12 is 75 amps in 12V DC and 24V DC power systems.\u003c\/p\u003e\u003cp\u003eThe Bypass Module provides a manual method (ON\/OFF switch) to control loads by providing power to each load in case of a CLMD12 malfunction or a NMEA 2000(R) network failure. The CBMD12 utilizes standard fuses for overcurrent protection and 12 Carling Curvette(R) Rocker Switches for manual control of each load. With the use of the Curvette rocker switches, there is no arcing that occurs while manually overriding a load. Furthermore, unlike other digital switching products, MPower does not require moving a fuse which can cause electrical connections to degrade, or the possibility for ignition.\u003c\/p\u003e\u003cp\u003eIt's important to ensure that the current rating of the fuse for each load is appropriate to protect the load and the wiring for that load. Please note that the bypass module does not support paralleled outputs, since each circuit is controlled by a separate switch. Additionally, the bypass module does not support dimming of circuits.\u003c\/p\u003e","brand":"Maretron","offers":[{"title":"Default Title","offer_id":47442021384354,"sku":"MARCBMD12R","price":225.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/MARCBMD12R.jpg?v=1784399724"},{"product_id":"talos-sfd-1000-n2k-motion-lightning-detector-nmea2000-compliant","title":"Talos SFD-1000-N2K Motion Lightning Detector NMEA2000 Compliant MPN - 1428","description":"\u003cp\u003e\u003cstrong\u003eTalos SFD-1000-N2K Motion Lightning Detector NMEA2000 Compliant\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1428\u003c\/p\u003eModel: SFD-1000-N2K\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eDetects Lightning Up to 25 Mile Range\u003c\/li\u003e\n\u003cli\u003ePlug and Play Connectivity\u003c\/li\u003e\n\u003cli\u003eAlerts Givien via NMEA 2000 Digital Network\u003c\/li\u003e\n\u003cli\u003eSame Technology Used in Expensive Weather Stations\u003c\/li\u003e\n\u003cli\u003e3 Different Alert Messages Indicate the Distance (approaching or departing) of the Storm Front\n 25 NM, 10 NM, 5 NM\u003c\/li\u003e\n\u003cli\u003eAll Clear Message After 30 Minutes of No Lightning Strikes\u003c\/li\u003e\n\u003cli\u003eLow Cost, Compact Design, High Accuracy\u003c\/li\u003e\n\u003cli\u003eIP-67 Waterproof\u003c\/li\u003e\n\u003cli\u003eLow Power Consumption\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDesigned for OEM customized applications and boat builds, the SFD-1000-N2K utilizes a proprietary, patent-pending, compact design. The unit connects directly to the NMEA 2000 network, with plug and play connectivity and alerts are seen\ndirectly on the multi-functional displays (MFDs).\u003c\/p\u003e\u003cp\u003eThe TALOS Remote Lightning Detector alerts you to approaching or departing storm fronts and lightning by sensing the distance from the lightning strikes that are occurring in the area. The unit sends alerts via the digital NMEA 2000 network and those alerts show on the boat's multi-functionaldisplays (MFDs). The alerts display the distance at which the lightning was detected. Audible and visual alerts make you aware of potentially life-threatening and electronic equipment damaging lightning, elevating your situation awareness and providing you with time to seek safety.\u003c\/p\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePerformance @ 25 degC (77 degF)\u003c\/th\u003e\n\u003ctd\u003eOperating Temperatures\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e-20 to 80 deg C (-4 to 176 deg F)\u003c\/th\u003e\n\u003ctd\u003eReverse Polarity Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYes\u003c\/th\u003e\n\u003ctd\u003eImput\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupply Voltage\u003c\/th\u003e\n\u003ctd\u003e6-30 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent (listening mode)\u003c\/th\u003e\n\u003ctd\u003e400 micro Amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent (detecting mode)\u003c\/th\u003e\n\u003ctd\u003e4.5mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElectrical Connections\u003c\/th\u003e\n\u003ctd\u003ePower received from NMEA 2000 CAN bus.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Talos","offers":[{"title":"Default Title","offer_id":47442029281442,"sku":"TAL1428","price":349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/TAL1428.jpg?v=1784399871"},{"product_id":"siren-marine-nmea-2000-cable-and-t-connector","title":"Siren Marine NMEA 2000 Cable and T Connector MPN - SM-ACC3-N2KCT","description":"\u003cp\u003e\u003cstrong\u003eSiren Marine NMEA 2000 Cable and T Connector\u003c\/strong\u003e\u003c\/p\u003eModel: SM-ACC3-N2KCT\u003cbr\u003e\u003cp\u003eExpand the capabilities of your Connected Boat(R) system to monitor engine data, water, fuel and waste tanks, and more! The NMEA 2000 Connection Kit includes a 2-meter connection cable and a 3-Way Connection T\" - everything you'll need to connect your Siren 3 Series Main Device to the NMEA 2000 data system backbone.\u003c\/p\u003e\"","brand":"Siren marine","offers":[{"title":"Default Title","offer_id":47442036523170,"sku":"SRMSMACC3N2KCT","price":38.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/SRMSMACC3N2KCT.jpg?v=1784400074"},{"product_id":"simrad-hs65-gnss-compass-with-flat-mount","title":"Simrad HS65 GNSS Compass with Flat Mount MPN - 000-16235-001","description":"\u003cp\u003e\u003cstrong\u003eSimrad HS65 GNSS Compass with Flat Mount\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eModel: 000-16235-001\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeading accuracy without the restriction of magnetic interference to account for.\u003c\/li\u003e\n\u003cli\u003eHeading Accuracy of \u0026lt;2° RMS 10Hz ideal for Autopilot and MARPA applications. *\u0026lt;90seconds cold start\u003c\/li\u003e\n\u003cli\u003eDead Reckoning for heading up 3 minutes following loss of satellite data.\u003c\/li\u003e\n\u003cli\u003ePosition \u0026lt;1 Meter 10Hz\u003c\/li\u003e\n\u003cli\u003ePitch\/Roll Accuracy \u0026lt;1.5° RMS\u003c\/li\u003e\n\u003cli\u003eSleek design\u003c\/li\u003e\n\u003cli\u003eBackup magnetic compass with \u0026lt;3° RMS**\u003c\/li\u003e\n\u003cli\u003eHeave \u0026lt;30CM RMS\u003c\/li\u003e\n\u003cli\u003eSupports GPS, GLONASS, Galileo, BEIDOU, QZSS1 Constellation options with SBAS\u003c\/li\u003e\n\u003cli\u003eOptions for Flush, Raised or Pole mount\u003c\/li\u003e\n\u003cli\u003e640mm\/2ft NMEA2000 Fly-lead\u003c\/li\u003e\n\u003cli\u003eLow profile mounting adaptor for various installation types.\u003c\/li\u003e\n\u003cli\u003eLow Profile Pole Mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003cfigure\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eGNSS Constellations ​\u003c\/th\u003e\n\u003ctd\u003eGPS, GLONASS, Galileo, BeiDou, QZSS​\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSBAS tracking\u003c\/th\u003e\n\u003ctd\u003e2-channel, parallel tracking (WAAS, EGNOS,\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition accuracy (no SBAS)​\u003c\/th\u003e\n\u003ctd\u003e1.5 m RMS (no SBAS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeading accuracy, static\/dynamic (RMS) ​\u003c\/th\u003e\n\u003ctd\u003e\u0026lt;2° (RMS)​\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeading dead reckoning (DR) deviation per minute​\u003c\/th\u003e\n\u003ctd\u003e2°\/min​ (up to 3 minutes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePitch\/roll accuracy, static\/dynamic (RMS)​\u003c\/th\u003e\n\u003ctd\u003e1.5° (RMS) ​\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeading accuracy, magnetic post 3 min DR ​\u003c\/th\u003e\n\u003ctd\u003e\u0026lt;±3° TRUE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeave accuracy, dynamic (RMS)​\u003c\/th\u003e\n\u003ctd\u003e30cm ​\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUpdate rate​\u003c\/th\u003e\n\u003ctd\u003e10Hz​\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRate of turn\u003c\/th\u003e\n\u003ctd\u003e500°\/s maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTime to position fix\u003c\/th\u003e\n\u003ctd\u003e25 s typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTime to Heading Fix (GNSS)\u003c\/th\u003e\n\u003ctd\u003e10 s typical (after you have valid position)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompass safe distance\u003c\/th\u003e\n\u003ctd\u003e0.5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eInput voltage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e9—16 V DC\u003c\/th\u003e\n\u003ctd\u003ePower consumption\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e1.6 W (multi-GNSS, typical continuous draw at 12 V)\u003c\/th\u003e\n\u003ctd\u003eLoad equivalency number (LEN)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e3\u003c\/th\u003e\n\u003ctd\u003ePower isolation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIsolated to enclosure\u003c\/th\u003e\n\u003ctd\u003eReverse polarity protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYes\u003c\/th\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNMEA 2000® Micro C\u003c\/th\u003e\n\u003ctd\u003eOther\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (no mount)\u003c\/th\u003e\n\u003ctd\u003e0.85 kg (1.87 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e—25°C to + 70°C (—13°F to +158°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEnclosure\u003c\/th\u003e\n\u003ctd\u003eIPX6 and IPX7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/figure\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eWhat's in the Box:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHS-65 Compass\u003c\/li\u003e\n\u003cli\u003eNMEA2000 T-Joiner\u003c\/li\u003e\n\u003cli\u003eFlat Mount\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":47442041602210,"sku":"SIM00016235001","price":1349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/SIM00016235001_001.jpg?v=1784400221"}],"url":"https:\/\/marinerswarehouse.com\/collections\/nmea-2000-sensors-control-modules.oembed","provider":"Mariners Warehouse Shop","version":"1.0","type":"link"}