{"title":"Marine PowerPod Display Housings","description":"\u003cp\u003eExplore Marine PowerPod Display Housings at Mariners Warehouse. Compare available products and review each listing for part numbers and specifications.\u003c\/p\u003e","products":[{"product_id":"navpod-pp4100-powerpod-un-cut","title":"Navpod PP4100 Powerpod UN-CUT MPN - PP4100","description":"NavPod PP4100 PowerPod Un-Cut (footprint 3.875\"x 3.875 in) \u003cp\u003ePP4100 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.\u003c\/p\u003e \u003cp\u003eThe trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.\u003c\/p\u003e \u003cp\u003ePowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.\u003c\/p\u003e \u003ctable border=\"1 in width=\"\u003e \u003ctr\u003e \u003ctd\u003eH\u003c\/td\u003e \u003ctd\u003eW\u003c\/td\u003e \u003ctd\u003eD\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOverall Size\u003c\/td\u003e \u003ctd\u003e7.375 in\u003c\/td\u003e \u003ctd\u003e5.9 in\u003c\/td\u003e \u003ctd\u003e5.375 in\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eUsable Face\u003c\/td\u003e \u003ctd\u003e4.5 in\u003c\/td\u003e \u003ctd\u003e4.5 in\u003c\/td\u003e \u003ctd\u003e2.75 in\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMax Cutout\u003c\/td\u003e \u003ctd\u003e3.375 in\u003c\/td\u003e \u003ctd\u003e3.375 in\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e \u003cp\u003e\u003cb\u003eAll PowerPods include:\u003c\/b\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e?Acrylic capped ABS plastic\u003c\/li\u003e \u003cli\u003eChromed Stainless Steel tamper-proof fasteners\u003c\/li\u003e \u003cli\u003eDouble seal for watertight integrity\u003c\/li\u003e \u003cli\u003eSwivel Base with large pass-through for wire harness\u003c\/li\u003e \u003cli\u003eModels are available Pre-Cut for popular electronics\u003c\/li\u003e \u003c\/ul\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46385029611682,"sku":"NAVPP4100","price":309.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/NAVPP4100.jpg?v=1765300971"},{"product_id":"navpod-pp4101-powerpod-for-4-instruments","title":"Navpod PP4101 Powerpod for 4 in Instruments MPN - PP4101","description":"NavPod PP4101 PowerPod Pre-Cut for Raymarine, P70, P70R, \u0026amp; ST60 \u003cp\u003ePP4100 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.\u003c\/p\u003e \u003cp\u003eThe trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.\u003c\/p\u003e \u003cp\u003ePowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.\u003c\/p\u003e \u003ctable border=\"1 in width=\"\u003e \u003ctr\u003e \u003ctd\u003eH\u003c\/td\u003e \u003ctd\u003eW\u003c\/td\u003e \u003ctd\u003eD\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOverall Size\u003c\/td\u003e \u003ctd\u003e7.375 in\u003c\/td\u003e \u003ctd\u003e5.9 in\u003c\/td\u003e \u003ctd\u003e5.375 in\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eUsable Face\u003c\/td\u003e \u003ctd\u003e4.5 in\u003c\/td\u003e \u003ctd\u003e4.5 in\u003c\/td\u003e \u003ctd\u003e2.75 in\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMax Cutout\u003c\/td\u003e \u003ctd\u003e3.375 in\u003c\/td\u003e \u003ctd\u003e3.375 in\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e \u003cp\u003e\u003cb\u003eAll PowerPods include:\u003c\/b\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAcrylic capped ABS plastic\u003c\/li\u003e \u003cli\u003eChromed Stainless Steel tamper-proof fasteners\u003c\/li\u003e \u003cli\u003eDouble seal for watertight integrity\u003c\/li\u003e \u003cli\u003eSwivel Base with large pass-through for wire harness\u003c\/li\u003e \u003cli\u003eModels are available Pre-Cut for popular electronics\u003c\/li\u003e \u003c\/ul\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46385029644450,"sku":"NAVPP4101","price":329.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/NAVPP4101.jpg?v=1765300971"},{"product_id":"navpod-pp4102-powerpod-for-one-simrad-is42","title":"Navpod PP4102 PowerPod for one Simrad IS42 MPN - PP4102","description":"\u003cp\u003e\u003cb\u003eNAVPOD PP4102 PowderPod\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e PP4102\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePowerPod Pre-Cut for one Simrad IS42 \/ B\u0026amp;G Triton2\/AP44 square hole instrument\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1 in for PP4100, PP4400, PP4500, PP4600 Series; 1.8 in for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7 in, 9 in, 12 in and 16 in displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods â€\" Protection, Convenience, Security.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e7.06\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e6.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDepth\u003c\/th\u003e\n\u003ctd\u003e4.72\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e4.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e4.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDepth\u003c\/th\u003e\n\u003ctd\u003e3.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDepth\u003c\/th\u003e\n\u003ctd\u003e3.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e4.58\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46385029841058,"sku":"NAVPP4102","price":329.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/NAVPP4102.jpg?v=1765300974"},{"product_id":"navpod-pp5920-00-powerpod-for-un-cut","title":"Navpod PP5920-00 Powerpod for Un-Cut MPN - PP5920-00","description":"\u003cp\u003e\u003cb\u003eNAVPOD PP5920-00 PowerPod\u003c\/b\u003e\u003c\/p\u003eModel: PP5920-00\u003cbr\u003e\u003cul\u003e\u003cli\u003ePowerPod Un-Cut (usable face = 18.36\"w x 10.61\"h)(46.6cm w x 26.9cm h) (Carbon Series)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8\" opening (1.1\" on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPod pre-cut models available for 7 in, 9 in, 12\"and 16 in LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods â€\" Protection, Convenience, Security.\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46385037672610,"sku":"NAVPP592000","price":549.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/NAVPP592000.jpg?v=1765301077"},{"product_id":"navpod-pp5920-01-powerpod-for-raymarine-axiom-pro-16","title":"Navpod PP5920-01 Powerpod for Raymarine AXIOM PRO 16 MPN - PP5920-01","description":"\u003cp\u003e\u003cb\u003eNAVPOD PP5920-01 PowerPod\u003c\/b\u003e\u003c\/p\u003eModel: PP5920-01\u003cbr\u003e\u003cul\u003e\u003cli\u003ePowerPod Pre-Cut for Raymarine AXIOM PRO 16\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8\" opening (1.1\" on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPod pre-cut models available for 7 in, 9 in, 12\"and 16 in LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods â€\" Protection, Convenience, Security.\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46385038131362,"sku":"NAVPP592001","price":569.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/NAVPP592001.jpg?v=1765301080"},{"product_id":"navpod-pp5920-03-powerpod-for-simrad-nss16-evo3","title":"Navpod PP5920-03 Powerpod for Simrad NSS16 evo3 MPN - PP5920-03","description":"\u003cp\u003e\u003cb\u003eNAVPOD PP5920-03 PowerPod\u003c\/b\u003e\u003c\/p\u003eModel: PP5920-03\u003cbr\u003e\u003cul\u003e\u003cli\u003ePowerPod Pre-Cut for Simrad NSS16 evo3 \/ B\u0026amp;G Zeus3 16\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8\" opening (1.1\" on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPod pre-cut models available for 7 in, 9 in, 12\"and 16 in LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods â€\" Protection, Convenience, Security.\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46385038164130,"sku":"NAVPP592003","price":569.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/NAVPP592003.jpg?v=1765301080"},{"product_id":"navpod-pp5920-04-powerpod-for-simrad-nss16-evo2","title":"Navpod PP5920-04 Powerpod for Simrad NSS16 evo2 MPN - PP5920-04","description":"\u003cp\u003e\u003cb\u003eNAVPOD PP5920-04 PowerPod\u003c\/b\u003e\u003c\/p\u003eModel: PP5920-04\u003cbr\u003e\u003cul\u003e\u003cli\u003ePowerPod Pre-Cut for Simrad NSS16 evo2\/B\u0026amp;G Zeus2 16\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8\" opening (1.1\" on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPod pre-cut models available fo\", 9 in, 12\"and 16 in LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods â€\" Protection, Convenience, Security.\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46385038327970,"sku":"NAVPP592004","price":569.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/NAVPP592004.jpg?v=1765301082"},{"product_id":"navpod-pp5920-05-powerpod-for-garmin-7616-7416","title":"NAVPOD PP5920-05 PowerPod for Garmin 7616\/7416 MPN - PP5920-05","description":"\u003cp\u003e\u003cb\u003eNAVPOD PP5920-05 PowerPod\u003c\/b\u003e\u003c\/p\u003eModel: PP5920-05\u003cbr\u003e\u003cul\u003e\u003cli\u003ePowerPod Pre-Cut for Garmin GPSMAP 7616 \/ 7416 (Carbon Series)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8 in opening (1.1\" on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPod pre-cut models available for 7 in, 9 in, 12\"and 16 in LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods â€\" Protection, Convenience, Security.\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46385038360738,"sku":"NAVPP592005","price":569.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/NAVPP592005.jpg?v=1765301083"},{"product_id":"navpod-pp5920-06-powerpod-for-humminbird-solix-15","title":"Navpod PP5920-06 PowerPod for Humminbird SOLIX 15 MPN - PP5920-06","description":"\u003cp\u003e\u003cb\u003eNAVPOD PP5920-06 PowerPod\u003c\/b\u003e\u003c\/p\u003eModel: PP5920-06\u003cbr\u003e\u003cul\u003e\u003cli\u003ePowerPod Pre-Cut for Humminbird SOLIX 15\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8\" opening (1.1\" on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPod pre-cut models available for 7 in, 9 in, 12\"and 16 in LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods â€\" Protection, Convenience, Security.\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46385038524578,"sku":"NAVPP592006","price":569.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/NAVPP592006.jpg?v=1765301084"},{"product_id":"navpod-pp5920-07-powerpod-for-furuno-navnet-tztouch2","title":"Navpod PP5920-07 PowerPod for Furuno NavNet TZtouch2 MPN - PP5920-07","description":"\u003cp\u003e\u003cb\u003eNAVPOD PP5920-07 PowerPod\u003c\/b\u003e\u003c\/p\u003eModel: PP5920-07\u003cbr\u003e\u003cul\u003e\u003cli\u003ePowerPod Pre-Cut for Furuno NavNet TZtouch2 15 in (TZTL15F) Multi Touch MFD\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8 in opening (1.1\" on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPod pre-cut models available for 7 in, 9 in, 12\"and 16 in LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods â€\" Protection, Convenience, Security.\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46385038557346,"sku":"NAVPP592007","price":569.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/NAVPP592007.jpg?v=1765301085"},{"product_id":"navpod-pp5920-08-powerpod-for-lowrance-hds-carbon-16","title":"Navpod PP5920-08 PowerPod for Lowrance HDS Carbon 16 MPN - PP5920-08","description":"\u003cp\u003e\u003cb\u003eNAVPOD PP5920-08 PowerPod\u003c\/b\u003e\u003c\/p\u003eModel: PP5920-08\u003cbr\u003e\u003cul\u003e\u003cli\u003ePowerPod Pre-Cut for Lowrance HDS Carbon 16\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8 in€ opening (1.1 in on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPod pre-cut models available for 7 in, 9 in, 12\"and 16 in LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods â€\" Protection, Convenience, Security.\u003c\/p\u003e\u003cp\u003eSample\u003c\/p\u003e\u003cp\u003eSample\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46385038688418,"sku":"NAVPP592008","price":569.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/NAVPP592008.jpg?v=1765301087"},{"product_id":"navpod-pp5920-10-powerpod-for-simrad-nso2","title":"Navpod PP5920-10 PowerPod for Simrad NSO2 MPN - PP5920-10","description":"\u003cp\u003e\u003cb\u003eNAVPOD PP5920-10 PowerPod\u003c\/b\u003e\u003c\/p\u003eModel: PP5920-10\u003cbr\u003e\u003cul\u003e\u003cli\u003ePowerPod Pre-Cut for Simrad NSO evo2 NSO evo3 16 in\/ B\u0026amp;G Zeus2 Zeus3 Glass Helm 16 in (MO16P-MO16T-ZM16T)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8\" opening (1.1 in on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPod pre-cut models available for 7 in, 9 in, 12\"and 16 in LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods â€\" Protection, Convenience, Security.\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46385038721186,"sku":"NAVPP592010","price":569.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/NAVPP592010.jpg?v=1765301087"},{"product_id":"navpod-pp5920-12-powerpod-for-lowrance-hds-live-16","title":"Navpod PP5920-12 PowerPod for Lowrance HDS-Live 16 MPN - PP5920-12","description":"\u003cp\u003e\u003cb\u003eNAVPOD PP592012 PowerPod\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e PP5920-12\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePowerPod Pre-Cut for Lowrance HDS-16 LIVE\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1 in for PP4100, PP4400, PP4500, PP4600 Series; 1.8 in for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7 in, 9 in, 12 in and 16 in displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods: Protection, Convenience, Security.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e14.53\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e16.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDepth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e9.85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e15.18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDepth\u003c\/th\u003e\n\u003ctd\u003e4.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e14.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight\u003c\/th\u003e\n\u003ctd\u003eGen 3 round\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.125\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46385038819490,"sku":"NAVPP592012","price":569.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/NAVPP592012.jpg?v=1765301089"},{"product_id":"navpod-pp4100-powerpod-uncut-43323","title":"NavPod PP4100 PowerPod Uncut MPN - PP4100","description":"\u003cb\u003ePP4100 PowerPod Uncut\u003c\/b\u003e\u003cbr\u003ePart #: PP4100\u003cbr\u003e\u003cbr\u003e\u003ci\u003eNavPod Protects Your Electronics From Harsh Conditions\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003eThe PP4100 PowerPod is uncut with a usable face of 4.5\"W x 4.5\"H and a footprint of 3.875\" x 3.875\".\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46385694867618,"sku":"43323","price":309.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/43323XL.jpg?v=1765311781"},{"product_id":"navpod-pp4101-powerpod-precut-for-one-instrument-43324","title":"NavPod PP4101 PowerPod Precut for One Instrument MPN - PP4101","description":"\u003cb\u003ePP4101 PowerPod Precut for One Instrument (3.6\" \/ 110mm hole)\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003ci\u003eNavPod Protects Your Electronics From Harsh Conditions\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003eThe PP4101 PowerPod is precut for the following:\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eRaymarine i70 \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRaymarine ST60\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGarmin GMI10\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGarmin GMI20\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGarmin GHC20\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFuruno F150\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFuruno FI70\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSimrad IS20\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46385694965922,"sku":"43324","price":329.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/43324XL.jpg?v=1765311783"},{"product_id":"navpod-powerpod-pre-cut-f-garmin-gpsmap-942xs-942-922xs-922-68924","title":"NavPod PowerPod Pre-Cut for Garmin GPSMAP® 942xs, 942, 922xs \u0026 922 MPN - PP4500-08","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Garmin GPSMAP® 942xs, 942, 922xs \u0026amp; 922\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8” opening (1.1” on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPods are pre-cut models available for 7”, 9” and 12” LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods – Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46386330468514,"sku":"68924","price":379.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/68924XL.jpg?v=1765321909"},{"product_id":"navpod-powerpod-pre-cut-f-simrad-nss12-evo-b-g-zeus-12-69103","title":"NavPod PowerPod Pre-Cut for Simrad NSS12 evo³ \u0026 B\u0026G Zeus³ 12 MPN - PP5200-14","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Simrad NSS12 evo³ \u0026amp; B\u0026amp;G Zeus³ 12\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8” opening (1.1” on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPods are pre-cut models available for 7”, 9” and 12” LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods – Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46386334335138,"sku":"69103","price":539.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/69103XL.jpg?v=1765321959"},{"product_id":"navpod-powerpod-pre-cut-f-humminbird-solix-12-69662","title":"NavPod PowerPod Pre-Cut for Humminbird SOLIX 12 MPN - PP5200-02","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Humminbird SOLIX 12\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003cbr\u003e\u003cbr\u003ePowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003cbr\u003e\u003cbr\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003cbr\u003e\u003cbr\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8” opening (1.1” on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003cbr\u003e\u003cbr\u003eAll NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPods are pre-cut models available for 7”, 9” and 12” LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003cbr\u003e\u003cbr\u003ePowerPods – Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46386342592674,"sku":"69662","price":539.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/69662XL.jpg?v=1765322088"},{"product_id":"navpod-powerpod-pre-cut-f-garmin-gpsmap-1242xsv-1222xsv-1222-69664","title":"NavPod PowerPod Pre-Cut for Garmin GPSMAP® 1242xsv, 1222xsv \u0026 1222 MPN - PP5200-13","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Garmin GPSMAP® 1242xsv, 1222xsv \u0026amp; 1222\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003cbr\u003e\u003cbr\u003ePowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003cbr\u003e\u003cbr\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003cbr\u003e\u003cbr\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8” opening (1.1” on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003cbr\u003e\u003cbr\u003eAll NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPods are pre-cut models available for 7”, 9” and 12” LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003cbr\u003e\u003cbr\u003ePowerPods – Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46386342625442,"sku":"69664","price":539.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/69664XL.jpg?v=1765322089"},{"product_id":"navpod-powerpod-pre-cut-f-simrad-nss7-evo-b-g-zeus-7-69666","title":"NavPod PowerPod Pre-Cut for Simrad NSS7 evo³ \u0026 B\u0026G Zeus³ 7 MPN - PP4500-09","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Simrad NSS7 evo³ \u0026amp; B\u0026amp;G Zeus³ 7\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003cbr\u003e\u003cbr\u003ePowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003cbr\u003e\u003cbr\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003cbr\u003e\u003cbr\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8” opening (1.1” on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003cbr\u003e\u003cbr\u003eAll NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPods are pre-cut models available for 7”, 9” and 12” LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003cbr\u003e\u003cbr\u003ePowerPods – Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46386342723746,"sku":"69666","price":379.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/69666XL.jpg?v=1765322091"},{"product_id":"navpod-powerpod-pre-cut-f-simrad-nss9-evo-b-g-zeus-9-69667","title":"NavPod PowerPod Pre-Cut for Simrad NSS9 evo³ \u0026 B\u0026G Zeus³ 9 MPN - PP4600-06","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Simrad NSS9 evo³ \u0026amp; B\u0026amp;G Zeus³ 9\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8” opening (1.1” on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPods are pre-cut models available for 7”, 9” and 12” LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods – Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46386342756514,"sku":"69667","price":419.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/69667XL.jpg?v=1765322091"},{"product_id":"navpod-powerpod-pre-cut-f-garmin-742xs-742-722xs-722-69668","title":"NavPod PowerPod Pre-Cut for Garmin 742xs, 742, 722xs \u0026 722 MPN - PP4400-09","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Garmin 742xs, 742, 722xs \u0026amp; 722\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8” opening (1.1” on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPods are pre-cut models available for 7”, 9” and 12” LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods – Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46386342854818,"sku":"69668","price":369.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/69668XL.jpg?v=1765322094"},{"product_id":"navpod-powerpod-pre-cut-f-1-simrad-is42-b-g-triton-ap44-square-hole-instrument-69967","title":"NavPod PowerPod Pre-Cut for 1 Simrad IS42 \/ B\u0026G Triton²\/AP44 Square Hole Instrument MPN - PP4102","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for 1 Simrad IS42 \/ B\u0026amp;G Triton²\/AP44 Square Hole Instrument\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8” opening (1.1” on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPods are pre-cut models available for 7”, 9” and 12” LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods – Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46386351112354,"sku":"69967","price":329.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/69967XL.jpg?v=1765322235"},{"product_id":"navpod-pp5920-01-powerpod-pre-cut-f-raymarine-axiom-pro-16-71283","title":"NavPod PP5920-01 PowerPod Pre-Cut for Raymarine AXIOM PRO 16 MPN - PP5920-01","description":"\u003cp\u003e\u003cstrong\u003ePP5920-01 PowerPod Pre-Cut for Raymarine AXIOM PRO 16\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8” opening (1.1” on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPods are pre-cut models available for 7”, 9” , 12″ and 16″ LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods – Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46386388598946,"sku":"71283","price":569.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/71283XL.jpg?v=1765322936"},{"product_id":"navpod-powerpod-pre-cut-f-garmin-gpsmap-942xs-942-922xs-922-carbon-black-71696","title":"NavPod PowerPod Pre-Cut for Garmin GPSMAP® 942xs, 942, 922xs \u0026 922 - Carbon Black MPN - PP4500-08-C","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Garmin GPSMAP® 942xs, 942, 922xs \u0026amp; 922 - Carbon Black\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8” opening (1.1” on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPods are pre-cut models available for 7”, 9” and 12” LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods – Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46386395054242,"sku":"71696","price":379.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/71696XL.jpg?v=1765323066"},{"product_id":"navpod-pp5920-05-powerpod-pre-cut-f-garmin-gpsmap-7616-7416-71875","title":"NavPod PP5920-05 PowerPod Pre-Cut for Garmin GPSMAP® 7616 \u0026 7416 MPN - PP5920-05","description":"\u003cp\u003e\u003cstrong\u003ePP5920-05 PowerPod Pre-Cut for Garmin GPSMAP® 7616 \u0026amp; 7416\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8” opening (1.1” on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPods are pre-cut models available for 7”, 9”, 12″ and 16″ LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods – Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46386397905058,"sku":"71875","price":569.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/71875XL.jpg?v=1765323123"},{"product_id":"navpod-powerpod-pre-cut-f-garmin-gpsmap-1242xsv-touch-1222xsv-touch-1222-touch-75528","title":"NavPod PowerPod Pre-Cut for Garmin GPSMAP® 1242xsv Touch, 1222xsv Touch \u0026 1222 Touch MPN - PP5200-16","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Garmin GPSMAP® 1242xsv Touch, 1222xsv Touch \u0026amp; 1222 Touch \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: High Gloss White\u003c\/li\u003e\n\u003cli\u003ePre-Cut\u003c\/li\u003e\n\u003cli\u003eSpecifically for: Garmin GPSMAP® 1242xsv Touch, 1222xsv Touch \u0026amp; 1222 Touch \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPod pre-cut models available for 7″, 9″, 12″ and 16″ LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods - Protection, Convenience \u0026amp; Security\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46386510659746,"sku":"75528","price":539.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/75528XL.jpg?v=1765325055"},{"product_id":"navpod-powerpod-pre-cut-f-garmin-gpsmap-8412xsv-8612xsv-76997","title":"NavPod PowerPod Pre-Cut for Garmin GPSMAP 8412xsv\/8612xsv MPN - PP5050-33","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Garmin GPSMAP 8412xsv\/8612xsv \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods: Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46386556764322,"sku":"76997","price":509.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/76997XL.jpg?v=1765325893"},{"product_id":"navpod-powerpod-pre-cut-f-garmin-gpsmap-8410xsv-8610xsv-76998","title":"NavPod PowerPod Pre-Cut for Garmin GPSMAP 8410xsv\/8610xsv MPN - PP4800-10","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Garmin GPSMAP 8410xsv\/8610xsv \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods: Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46386556862626,"sku":"76998","price":489.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/76998XL.jpg?v=1765325895"},{"product_id":"navpod-powerpod-pre-cut-f-garmin-gpsmap-8416xsv-8616xsv-76999","title":"NavPod PowerPod Pre-Cut for Garmin GPSMAP 8416xsv\/8616xsv MPN - PP5030-02","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Garmin GPSMAP 8416xsv\/8616xsv\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods: Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46386556895394,"sku":"76999","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/76999XL.jpg?v=1765325895"},{"product_id":"navpod-powerpod-pre-cut-f-garmin-gpsmap-1042xsv-1022xsv-1022-77000","title":"NavPod PowerPod Pre-Cut for Garmin GPSMAP 1042xsv\/1022xsv\/1022 MPN - PP4900-11","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Garmin GPSMAP 1042xsv\/1022xsv\/1022 \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods: Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46386557026466,"sku":"77000","price":489.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/77000XL.jpg?v=1765325897"},{"product_id":"navpod-powerpod-pre-cut-f-raymarine-axiom-12-78236","title":"NavPod PowerPod Pre-Cut for Raymarine AXIOM 12 MPN - PP5050-15","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Raymarine AXIOM 12 (Pre-Cut is for Surface Mount using rear mounting brackets)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods: Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46386612633762,"sku":"78236","price":509.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/78236XL.jpg?v=1765326646"},{"product_id":"navpod-powerpod-pre-cut-f-simrad-go7-xse-go7-xsr-b-g-vulcan-7r-78237","title":"NavPod PowerPod Pre-Cut for Simrad GO7 XSE, GO7 XSR\/B\u0026G Vulcan 7R MPN - PP4400-12","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut f\/Simrad GO7 XSE, GO7 XSR \/ B\u0026amp;G Vulcan 7R \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods: Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46386612895906,"sku":"78237","price":369.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/78237XL.jpg?v=1765326649"},{"product_id":"navpod-powerpod-pre-cut-f-two-instruments-two-3-6-holes-78470","title":"NavPod PowerPod Pre-Cut for Two Instruments Two 3.6\" Holes MPN - PP4502","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Two Instruments Two 3.6\" Holes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePowerPods: Protection, Convenience, Security.\u003c\/strong\u003e\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46386629279906,"sku":"78470","price":379.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/78470XL.jpg?v=1765326877"},{"product_id":"navpod-powerpod-pre-cut-f-garmin-echomap-plus-72sv-73sv-74sv-75sv-72cv-73cv-74cv-75cv-79768","title":"NavPod PowerPod Pre-Cut for Garmin ECHOMAP Plus 72sv, 73sv, 74sv, 75sv, 72cv, 73cv, 74cv \u0026 75cv MPN - PP4500-10","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Garmin ECHOMAP Plus 72sv, 73sv, 74sv, 75sv, 72cv, 73cv, 74cv \u0026amp; 75cv\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods: Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46386669944994,"sku":"79768","price":379.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/79768XL.jpg?v=1765327401"},{"product_id":"navpod-powerpod-precut-f-garmin-echomap-plus-92sv-93sv-94sv-95sv-84346","title":"NavPod PowerPod Precut for Garmin ECHOMAP Plus 92sv, 93sv, 94sv \u0026 95sv MPN - PP4600-10","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Precut for Garmin ECHOMAP Plus 92sv, 93sv, 94sv \u0026amp; 95sv\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods: Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46386801148066,"sku":"84346","price":419.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/84346XL.jpg?v=1765329855"},{"product_id":"navpod-powerpod-pre-cut-f-simrad-nss16-evo3-b-g-zeus3-16-87885","title":"NavPod PowerPod Pre-Cut for Simrad NSS16 evo3 \u0026 B\u0026G Zeus3 16 MPN - PP5920-03","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Simrad NSS16 evo3 \u0026amp; B \u0026amp; G Zeus3 16\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods: Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46386888048802,"sku":"87885","price":569.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/87885XL.jpg?v=1765331367"},{"product_id":"navpod-powerpod-pre-cut-f-simrad-nso-evo2-16-nso-evo3-16-nso-evo3s-16-mo16-p-mo16-t-b-g-zeus-glass-helm-16-zeus3-glass-helm-16-zeus3s-glass-helm-16-zm16-t-91262","title":"NavPod PowerPod Pre-Cut for Simrad NSO evo2 16?, NSO evo3 16?, NSO evo3S 16?, MO16-P, MO16-T, B\u0026G Zeus² Glass Helm 16?, Zeus3 Glass Helm 16?, Zeus3S Glass Helm 16? \u0026 ZM16-T MPN - PP5920-10","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Simrad NSO evo2 16″, NSO evo3 16″, NSO evo3S 16″, MO16-P, MO16-T, B \u0026amp; G Zeus² Glass Helm 16″, Zeus3 Glass Helm 16″, Zeus3S Glass Helm 16″ \u0026amp; ZM16-T\u003c\/strong\u003e \u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up its commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods: Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46387033669794,"sku":"91262","price":569.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/91262XL.jpg?v=1765333434"},{"product_id":"navpod-powerpod-pre-cut-f-furuno-navnet-tztouch3-12-tzt12f-92171","title":"NavPod PowerPod Pre-Cut for Furuno NavNet TZTouch3 12? (TZT12F) MPN - PP5030-03","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Furuno NavNet TZTouch3 12″ (TZT12F)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure, or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up its commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods: Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46387059622050,"sku":"92171","price":549.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/92171XL.jpg?v=1765333852"},{"product_id":"navpod-powerpod-pre-cut-f-garmin-gpsmap-723-723xsv-743-743xsv-92189","title":"NavPod PowerPod Pre-Cut for Garmin GPSMAP® 723, 723xsv, 743 \u0026 743xsv MPN - PP4400-15","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Garmin GPSMAP® 723, 723xsv, 743 \u0026amp; 743xsv\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure, or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up its commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods: Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46387060834466,"sku":"92189","price":369.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/92189XL.jpg?v=1765333873"},{"product_id":"navpod-powerpod-pre-cut-f-lowrance-hds-9-gen2-touch-hds-9-gen3-hds-carbon-9-92190","title":"NavPod PowerPod Pre-Cut for Lowrance HDS-9 Gen2 Touch, HDS-9 Gen3 \u0026 HDS Carbon 9 MPN - PP4600-08","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Lowrance HDS-9 Gen2 Touch, HDS-9 Gen3 \u0026amp; HDS Carbon 9 \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure, or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up its commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods: Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46387060965538,"sku":"92190","price":419.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/92190XL.jpg?v=1765333876"},{"product_id":"navpod-powerpod-pre-cut-f-garmin-gpsmap-923-923xsv-943-943xsv-92191","title":"NavPod PowerPod Pre-Cut for Garmin GPSMAP® 923, 923xsv, 943 \u0026 943xsv MPN - PP4800-14","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Garmin GPSMAP® 923, 923xsv, 943 \u0026amp; 943xsv\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure, or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up its commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods: Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46387060932770,"sku":"92191","price":489.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/92191XL.jpg?v=1765333875"},{"product_id":"navpod-powerpod-pre-cut-f-simrad-go12-xse-go12-xsr-b-g-vulcan-12r-92192","title":"NavPod PowerPod Pre-Cut for Simrad GO12 XSE, GO12 XSR \u0026 B\u0026G Vulcan 12R MPN - PP5050-26","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Simrad GO12 XSE, GO12 XSR \u0026amp; B \u0026amp; G Vulcan 12R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure, or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up its commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods: Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46387061063842,"sku":"92192","price":509.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/92192XL.jpg?v=1765333878"},{"product_id":"navpod-powerpod-pre-cut-f-furuno-navnet-tztouch3-9-tzt9f-92193","title":"NavPod PowerPod Pre-Cut for Furuno NavNet TZtouch3 9? (TZT9F) MPN - PP5100-02","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Furuno NavNet TZtouch3 9″ (TZT9F) \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure, or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up its commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods: Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46387061096610,"sku":"92193","price":489.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/92193XL.jpg?v=1765333878"},{"product_id":"navpod-powerpod-pre-cut-f-humminbird-solix-15-92195","title":"NavPod PowerPod Pre-Cut for Humminbird SOLIX 15 MPN - PP5920-06","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Humminbird SOLIX 15\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure, or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up its commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods: Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46387061194914,"sku":"92195","price":569.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/92195XL.jpg?v=1765333880"},{"product_id":"navpod-powerpod-un-cut-usable-face-18-36-w-x-10-61-h-46-6cm-w-x-26-9cm-h-92194","title":"NavPod PowerPod Un-Cut (Usable Face = 18.36?W x 10.61?H) (46.6cm W x 26.9cm H) MPN - PP5920-00","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Un-Cut (Usable Face = 18.36″W x 10.61″H) (46.6cm W x 26.9cm H) \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure, or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up its commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods: Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46387061227682,"sku":"92194","price":549.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/92194XL.jpg?v=1765333881"},{"product_id":"navpod-powerpod-pre-cut-f-furuno-tztl15f-tztouch2-92196","title":"NavPod PowerPod Pre-Cut for Furuno TZTL15F TZtouch2 MPN - PP5920-07","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Furuno TZTL15F TZtouch2\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure, or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up its commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods: Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46387061325986,"sku":"92196","price":569.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/92196XL.jpg?v=1765333883"},{"product_id":"navpod-powerpod-pre-cut-f-furuno-tzt16f-tztouch3-92197","title":"NavPod PowerPod Pre-Cut for Furuno TZT16F TZtouch3 MPN - PP5920-13","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Furuno TZT16F TZtouch3\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure, or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up its commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods: Protection, Convenience, Security.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46387061358754,"sku":"92197","price":569.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/92197XL.jpg?v=1765333883"},{"product_id":"navpod-powerpod-pre-cut-f-garmin-echomap-uhd2-75cv-100927","title":"NavPod PowerPod Pre-Cut for Garmin ECHOMAP UHD2 75cv MPN - PP4400-17","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Garmin ECHOMAP UHD2 75cv\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder or chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder or chartplotter, ensuring the reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder or chartplotter is easily flush-mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1\" for PP4100, PP4400, PP4500, and PP4600 Series; 1.8\" for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, and PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure, or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and nickel-chrome-plated stainless steel tamper-resistant screws for a little bling and a lot of security. NavPod backs up its commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":46387441533090,"sku":"100927","price":369.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/100927XL.jpg?v=1765340086"},{"product_id":"navpod-powerpod-pre-cut-f-garmin-echomap-uhd2-93sv-94sv-95sv-113485","title":"NavPod PowerPod Pre-Cut for Garmin ECHOMAP UHD2 93sv\/94sv\/95sv MPN - PP4600-17","description":"\u003cp\u003e\u003cstrong\u003ePowerPod Pre-Cut for Garmin ECHOMAP UHD2 93sv\/94sv\/95sv\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder\/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.\u003c\/p\u003e\u003cp\u003ePowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.\u003c\/p\u003e\u003cp\u003eNavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder\/chartplotter, assuring reliability and longevity of your marine electronics.\u003c\/p\u003e\u003cp\u003eYour fishfinder\/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.\u003c\/p\u003e\u003cp\u003eAll NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.\u003c\/p\u003e\u003cp\u003ePowerPods: Protection, Convenience, Security.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e PP4600-17\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":47480807424162,"sku":"113485","price":419.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/113485XL.jpg?v=1785236995"}],"url":"https:\/\/marinerswarehouse.com\/collections\/marine-powerpod-display-housings.oembed","provider":"Mariners Warehouse Shop","version":"1.0","type":"link"}