{"title":"Marine Boom Supports","description":"\u003cp\u003eExplore Marine Boom Supports at Mariners Warehouse. Compare available products and review each listing for part numbers and specifications.\u003c\/p\u003e","products":[{"product_id":"barton-marine-boomstrut-dinghy-black-f-boats-up-to-16-106769","title":"Barton Marine Boomstrut – Dinghy - Black for Boats Up To 16\" MPN - 44001","description":"\u003cp\u003e\u003cstrong\u003eBoomstrut – Dinghy - Black for Boats Up To 16\"\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Dinghy Boomstrut 44001 is manufactured and anodized in black only. It has a black webbing support sling that is fully adjustable and fits any boom. It is held in place by a return line to the mast that runs under the boom. The design allows rotational roll on the boom, so the sail shape is maintained. Suitable for dinghies with a maximum boom tip weight of 5kg. Works in conjunction with the existing kicker or rope vang fitted to the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSix sizes to suit yachts up to 12m\/40ft LOA\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePatented flexing spring provides fast response and a constant force for vang efficiency\u003c\/p\u003e\u003cp\u003eThe boomstrut’s lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling the boom down with a conventional kicker causes the Boomstrut to flex; releasing straightens the rods, thereby lifting and supporting the boom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaintenance-free, durable design\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEliminates friction and sliding parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImproved performance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLess weight and windage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEasy installation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThere’s no need to replace your existing hardware – the Boomstrut mounts independently inside the existing kicking strap tackle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSimple to follow instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Boomstrut is supplied with complete fitting instructions and more comprehensive details are available here on our website.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMast fitting can use existing luff groove\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTo eliminate drilling, the Boomstrut’s mast bracket can be slotted into your mast’s luff groove.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eContoured boom fitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Boomstrut’s boom bracket is contoured to fit both round and flat boom profiles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCarefully designed \u0026amp; constructed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Barton Boomstrut has been carefully designed and constructed to eliminate sharp edges, minimise parts and provide trouble-free installation and use.\u003c\/p\u003e\u003cp\u003eAll parts are from high grade stainless steel and black or grey anodised aluminium for good looks and durability. Spare parts available.\u003c\/p\u003e","brand":"Barton Marine","offers":[{"title":"Default Title","offer_id":47479328211106,"sku":"106769","price":294.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/106769XL.jpg?v=1785228732"},{"product_id":"barton-marine-boomstrut-silver-white-f-boats-up-to-20-106770","title":"Barton Marine Boomstrut – Silver\/White for Boats Up To 20' MPN - 44010","description":"\u003cp\u003e\u003cstrong\u003eBoomstrut – Silver\/White for Boats Up To 20'\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBoomstrut 44010 is designed for boats up to 6m (20ft) in length with a maximum boom tip weight of 6.3kg (14 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom to keep the desired sail shape even in light winds. Manufactured with white rods and Spectro Anodised boom \u0026amp; mast fittings. The uplift created means that the boom will not fall onto the boat when the sail is lowered or the topping lift is released or removed. Suitable to be used with wooden, carbon fiber, or aluminum spars.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSix sizes to suit yachts up to 12m\/40ft LOA\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePatented flexing spring provides fast response and a constant force for vang efficiency\u003c\/p\u003e\u003cp\u003eThe boomstrut’s lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling the boom down with a conventional kicker causes the Boomstrut to flex; releasing straightens the rods, thereby lifting and supporting the boom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaintenance-free, durable design\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEliminates friction and sliding parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImproved performance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLess weight and windage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEasy installation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThere’s no need to replace your existing hardware – the Boomstrut mounts independently inside the existing kicking strap tackle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSimple to follow instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Boomstrut is supplied with complete fitting instructions and more comprehensive details are available here on our website.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMast fitting can use existing luff groove\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTo eliminate drilling, the Boomstrut’s mast bracket can be slotted into your mast’s luff groove.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eContoured boom fitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Boomstrut’s boom bracket is contoured to fit both round and flat boom profiles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCarefully designed \u0026amp; constructed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Barton Boomstrut has been carefully designed and constructed to eliminate sharp edges, minimise parts and provide trouble-free installation and use.\u003c\/p\u003e\u003cp\u003eAll parts are from high grade stainless steel and black or grey anodised aluminium for good looks and durability. Spare parts available.\u003c\/p\u003e","brand":"Barton Marine","offers":[{"title":"Default Title","offer_id":47479328374946,"sku":"106770","price":328.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/106770XL.jpg?v=1785228737"},{"product_id":"barton-boomstrut-black-f-boats-up-to-20-106771","title":"Barton Boomstrut - Black for Boats Up To 20' MPN - 44011","description":"\u003cp\u003e\u003cstrong\u003eBoomstrut - Black for Boats Up To 20'\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBoomstrut 44011 is designed for boats up to 6m (20ft) in length with a maximum boom tip weight of 6.3kg (14 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom to keep the desired sail shape even in light winds. Manufactured with white rods and Spectro Anodised boom \u0026amp; mast fittings. The uplift created means that the boom will not fall onto the boat when the sail is lowered or the topping lift is released or removed. Suitable to be used with wooden, carbon fiber, or aluminum spars.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSix sizes to suit yachts up to 12m\/40ft LOA\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePatented flexing spring provides fast response and a constant force for vang efficiency\u003c\/p\u003e\u003cp\u003eThe boomstrut’s lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling the boom down with a conventional kicker causes the Boomstrut to flex; releasing straightens the rods, thereby lifting and supporting the boom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaintenance-free, durable design\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEliminates friction and sliding parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImproved performance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLess weight and windage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEasy installation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThere’s no need to replace your existing hardware – the Boomstrut mounts independently inside the existing kicking strap tackle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSimple to follow instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Boomstrut is supplied with complete fitting instructions and more comprehensive details are available here on our website.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMast fitting can use existing luff groove\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTo eliminate drilling, the Boomstrut’s mast bracket can be slotted into your mast’s luff groove.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eContoured boom fitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Boomstrut’s boom bracket is contoured to fit both round and flat boom profiles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCarefully designed \u0026amp; constructed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Barton Boomstrut has been carefully designed and constructed to eliminate sharp edges, minimise parts and provide trouble-free installation and use.\u003c\/p\u003e\u003cp\u003eAll parts are from high grade stainless steel and black or grey anodised aluminium for good looks and durability. Spare parts available.\u003c\/p\u003e","brand":"Barton Marine","offers":[{"title":"Default Title","offer_id":47479328407714,"sku":"106771","price":360.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/106771XL.jpg?v=1785228737"},{"product_id":"barton-boomstrut-silver-white-f-boats-20-25-106772","title":"Barton Boomstrut - Silver\/White for Boats 20-25' MPN - 44020","description":"\u003cp\u003e\u003cstrong\u003eBoomstrut - Silver\/White for Boats 20-25'\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eoomstrut 44020 is designed for boats 6m-7.5m (20ft -25ft) in length with a maximum boom tip weight of 9.5kg (21 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom to keep the desired sail shape even in light winds. Manufactured with white rods and Spectro Anodised boom \u0026amp; mast fittings. The uplift created means that the boom will not fall onto the boat when the sail is lowered or the topping lift is released or removed. Suitable to be used with wooden, carbon fibre or aluminium spars.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSix sizes to suit yachts up to 12m\/40ft LOA\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePatented flexing spring provides fast response and a constant force for vang efficiency\u003c\/p\u003e\u003cp\u003eThe boomstrut’s lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling the boom down with a conventional kicker causes the Boomstrut to flex; releasing straightens the rods, thereby lifting and supporting the boom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaintenance-free, durable design\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEliminates friction and sliding parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImproved performance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLess weight and windage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEasy installation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThere’s no need to replace your existing hardware – the Boomstrut mounts independently inside the existing kicking strap tackle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSimple to follow instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Boomstrut is supplied with complete fitting instructions and more comprehensive details are available here on our website.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMast fitting can use existing luff groove\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTo eliminate drilling, the Boomstrut’s mast bracket can be slotted into your mast’s luff groove.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eContoured boom fitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Boomstrut’s boom bracket is contoured to fit both round and flat boom profiles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCarefully designed \u0026amp; constructed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Barton Boomstrut has been carefully designed and constructed to eliminate sharp edges, minimise parts and provide trouble-free installation and use.\u003c\/p\u003e\u003cp\u003eAll parts are from high grade stainless steel and black or grey anodised aluminium for good looks and durability. Spare parts available.\u003c\/p\u003e","brand":"Barton Marine","offers":[{"title":"Default Title","offer_id":47479328506018,"sku":"106772","price":388.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/106772XL.jpg?v=1785228740"},{"product_id":"barton-boomstrut-black-f-boats-20-25-106773","title":"Barton Boomstrut - Black for Boats 20-25' MPN - 44021","description":"\u003cp\u003e\u003cstrong\u003eBoomstrut - Black for Boats 20-25'\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBoomstrut 44021 is designed for boats 6m-7.5m (20ft -25ft) in length with a maximum boom tip weight of 9.5kg (21 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom to keep the desired sail shape even in light winds. Manufactured with white rods and Spectro Anodised boom \u0026amp; mast fittings. The uplift created means that the boom will not fall onto the boat when the sail is lowered or the topping lift is released or removed. Suitable to be used with wooden, carbon fibre or aluminium spars. This version comes with blacks rods. Also available in white, part number 44020.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSix sizes to suit yachts up to 12m\/40ft LOA\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePatented flexing spring provides fast response and a constant force for vang efficiency\u003c\/p\u003e\u003cp\u003eThe boomstrut’s lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling the boom down with a conventional kicker causes the Boomstrut to flex; releasing straightens the rods, thereby lifting and supporting the boom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaintenance-free, durable design\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEliminates friction and sliding parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImproved performance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLess weight and windage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEasy installation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThere’s no need to replace your existing hardware – the Boomstrut mounts independently inside the existing kicking strap tackle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSimple to follow instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Boomstrut is supplied with complete fitting instructions and more comprehensive details are available here on our website.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMast fitting can use existing luff groove\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTo eliminate drilling, the Boomstrut’s mast bracket can be slotted into your mast’s luff groove.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eContoured boom fitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Boomstrut’s boom bracket is contoured to fit both round and flat boom profiles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCarefully designed \u0026amp; constructed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Barton Boomstrut has been carefully designed and constructed to eliminate sharp edges, minimise parts and provide trouble-free installation and use.\u003c\/p\u003e\u003cp\u003eAll parts are from high grade stainless steel and black or grey anodised aluminium for good looks and durability. Spare parts available.\u003c\/p\u003e","brand":"Barton Marine","offers":[{"title":"Default Title","offer_id":47479328538786,"sku":"106773","price":420.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/106773XL.jpg?v=1785228741"},{"product_id":"barton-boomstrut-silver-white-f-boats-25-30-106774","title":"Barton Boomstrut - Silver\/White for Boats 25-30' MPN - 44030","description":"\u003cp\u003e\u003cstrong\u003eBoomstrut - Silver\/White for Boats 25-30'\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBoomstrut 44030 is designed for boats 7.5m – 9m (25ft – 30ft) in length with a maximum boom tip weight of 15kg (33 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom to keep the desired sail shape even in light winds. Manufactured with white rods and Spectro Anodised boom and mast fittings. The uplift created means that the boom will not fall onto the boat when the sail is lowered, or the topping lift is released or removed. Suitable to be used with wooden, carbon fibre or aluminium spars.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSix sizes to suit yachts up to 12m\/40ft LOA\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePatented flexing spring provides fast response and a constant force for vang efficiency\u003c\/p\u003e\u003cp\u003eThe boomstrut’s lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling the boom down with a conventional kicker causes the Boomstrut to flex; releasing straightens the rods, thereby lifting and supporting the boom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaintenance-free, durable design\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEliminates friction and sliding parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImproved performance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLess weight and windage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEasy installation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThere’s no need to replace your existing hardware – the Boomstrut mounts independently inside the existing kicking strap tackle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSimple to follow instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Boomstrut is supplied with complete fitting instructions and more comprehensive details are available here on our website.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMast fitting can use existing luff groove\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTo eliminate drilling, the Boomstrut’s mast bracket can be slotted into your mast’s luff groove.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eContoured boom fitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Boomstrut’s boom bracket is contoured to fit both round and flat boom profiles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCarefully designed \u0026amp; constructed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Barton Boomstrut has been carefully designed and constructed to eliminate sharp edges, minimise parts and provide trouble-free installation and use.\u003c\/p\u003e\u003cp\u003eAll parts are from high grade stainless steel and black or grey anodised aluminium for good looks and durability. Spare parts available.\u003c\/p\u003e","brand":"Barton Marine","offers":[{"title":"Default Title","offer_id":47479328637090,"sku":"106774","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/106774XL.jpg?v=1785228744"},{"product_id":"barton-boomstrut-black-f-boats-25-30-106775","title":"Barton Boomstrut - Black for Boats 25-30' MPN - 44031","description":"\u003cp\u003e\u003cstrong\u003eBoomstrut - Black for Boats 25-30'\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBoomstrut 44031 is designed for boats 7.5m – 9m (25ft – 30ft) in length with a maximum boom tip weight of 15kg (33 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom to keep the desired sail shape even in light winds. Manufactured with white rods and Spectro Anodised boom and mast fittings. The uplift created means that the boom will not fall onto the boat when the sail is lowered, or the topping lift is released or removed. Suitable to be used with wooden, carbon fibre or aluminium spars.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSix sizes to suit yachts up to 12m\/40ft LOA\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePatented flexing spring provides fast response and a constant force for vang efficiency\u003c\/p\u003e\u003cp\u003eThe boomstrut’s lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling the boom down with a conventional kicker causes the Boomstrut to flex; releasing straightens the rods, thereby lifting and supporting the boom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaintenance-free, durable design\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEliminates friction and sliding parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImproved performance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLess weight and windage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEasy installation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThere’s no need to replace your existing hardware – the Boomstrut mounts independently inside the existing kicking strap tackle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSimple to follow instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Boomstrut is supplied with complete fitting instructions and more comprehensive details are available here on our website.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMast fitting can use existing luff groove\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTo eliminate drilling, the Boomstrut’s mast bracket can be slotted into your mast’s luff groove.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eContoured boom fitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Boomstrut’s boom bracket is contoured to fit both round and flat boom profiles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCarefully designed \u0026amp; constructed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Barton Boomstrut has been carefully designed and constructed to eliminate sharp edges, minimise parts and provide trouble-free installation and use.\u003c\/p\u003e\u003cp\u003eAll parts are from high grade stainless steel and black or grey anodised aluminium for good looks and durability. Spare parts available.\u003c\/p\u003e","brand":"Barton Marine","offers":[{"title":"Default Title","offer_id":47479328669858,"sku":"106775","price":431.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/106775XL.jpg?v=1785228745"},{"product_id":"barton-boomstrut-black-f-boats-30-35-106777","title":"Barton Boomstrut - Black for Boats 30-35' MPN - 44036","description":"\u003cp\u003e\u003cstrong\u003eBoomstrut - Black for Boats 30-35'\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBoomstrut 44036 is designed for boats 9m – 10.5m (30ft- 35ft) in length with a maximum boom tip weight of 19kg (42 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom to keep the desired sail shape even in light winds. Manufactured with white rods and Spectro Anodised boom and mast fittings. The uplift created means that the boom will not fall onto the boat when the sail is lowered, or the topping lift is released or removed. Suitable to be used with wooden, carbon fibre or aluminium spars.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSix sizes to suit yachts up to 12m\/40ft LOA\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePatented flexing spring provides fast response and a constant force for vang efficiency\u003c\/p\u003e\u003cp\u003eThe boomstrut’s lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling the boom down with a conventional kicker causes the Boomstrut to flex; releasing straightens the rods, thereby lifting and supporting the boom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaintenance-free, durable design\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEliminates friction and sliding parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImproved performance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLess weight and windage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEasy installation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThere’s no need to replace your existing hardware – the Boomstrut mounts independently inside the existing kicking strap tackle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSimple to follow instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Boomstrut is supplied with complete fitting instructions and more comprehensive details are available here on our website.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMast fitting can use existing luff groove\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTo eliminate drilling, the Boomstrut’s mast bracket can be slotted into your mast’s luff groove.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eContoured boom fitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Boomstrut’s boom bracket is contoured to fit both round and flat boom profiles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCarefully designed \u0026amp; constructed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Barton Boomstrut has been carefully designed and constructed to eliminate sharp edges, minimise parts and provide trouble-free installation and use.\u003c\/p\u003e\u003cp\u003eAll parts are from high grade stainless steel and black or grey anodised aluminium for good looks and durability. Spare parts available.\u003c\/p\u003e","brand":"Barton Marine","offers":[{"title":"Default Title","offer_id":47479328768162,"sku":"106777","price":552.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/106777XL.jpg?v=1785228750"},{"product_id":"barton-boomstrut-silver-white-f-boats-30-35-106776","title":"Barton Boomstrut - Silver\/White for Boats 30-35' MPN - 44035","description":"\u003cp\u003e\u003cstrong\u003eBoomstrut - Silver\/White for Boats 30-35'\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBoomstrut 44035 is designed for boats 9m – 10.5m (30ft- 35ft) in length with a maximum boom tip weight of 19kg (42 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom to keep the desired sail shape even in light winds. Manufactured with white rods and Spectro Anodised boom and mast fittings. The uplift created means that the boom will not fall onto the boat when the sail is lowered, or the topping lift is released or removed. Suitable to be used with wooden, carbon fibre or aluminium spars.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSix sizes to suit yachts up to 12m\/40ft LOA\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePatented flexing spring provides fast response and a constant force for vang efficiency\u003c\/p\u003e\u003cp\u003eThe boomstrut’s lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling the boom down with a conventional kicker causes the Boomstrut to flex; releasing straightens the rods, thereby lifting and supporting the boom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaintenance-free, durable design\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEliminates friction and sliding parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImproved performance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLess weight and windage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEasy installation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThere’s no need to replace your existing hardware – the Boomstrut mounts independently inside the existing kicking strap tackle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSimple to follow instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Boomstrut is supplied with complete fitting instructions and more comprehensive details are available here on our website.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMast fitting can use existing luff groove\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTo eliminate drilling, the Boomstrut’s mast bracket can be slotted into your mast’s luff groove.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eContoured boom fitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Boomstrut’s boom bracket is contoured to fit both round and flat boom profiles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCarefully designed \u0026amp; constructed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Barton Boomstrut has been carefully designed and constructed to eliminate sharp edges, minimise parts and provide trouble-free installation and use.\u003c\/p\u003e\u003cp\u003eAll parts are from high grade stainless steel and black or grey anodised aluminium for good looks and durability. Spare parts available.\u003c\/p\u003e","brand":"Barton Marine","offers":[{"title":"Default Title","offer_id":47479328800930,"sku":"106776","price":520.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/106776XL.jpg?v=1785228750"},{"product_id":"barton-boomstrut-silver-white-f-boats-30-40-106778","title":"Barton Boomstrut - Silver\/White for Boats 30-40' MPN - 44040","description":"\u003cp\u003eBoomstrut 44040 is designed for boats 10.5m – 12m (30ft – 40ft) in length with a maximum boom tip weight of 23kg (51 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom to keep the desired sail shape even in light winds. Manufactured with white rods and Spectro Anodised boom and mast fittings. The uplift created means that the boom will not fall onto the boat when either the sail is lowered, or the topping lift is released or removed. Suitable to be used with wooden, carbon fibre or aluminium spars.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSix sizes to suit yachts up to 12m\/40ft LOA\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePatented flexing spring provides fast response and a constant force for vang efficiency\u003c\/p\u003e\u003cp\u003eThe boomstrut’s lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling the boom down with a conventional kicker causes the Boomstrut to flex; releasing straightens the rods, thereby lifting and supporting the boom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaintenance-free, durable design\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEliminates friction and sliding parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImproved performance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLess weight and windage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEasy installation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThere’s no need to replace your existing hardware – the Boomstrut mounts independently inside the existing kicking strap tackle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSimple to follow instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Boomstrut is supplied with complete fitting instructions and more comprehensive details are available here on our website.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMast fitting can use existing luff groove\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTo eliminate drilling, the Boomstrut’s mast bracket can be slotted into your mast’s luff groove.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eContoured boom fitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Boomstrut’s boom bracket is contoured to fit both round and flat boom profiles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCarefully designed \u0026amp; constructed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Barton Boomstrut has been carefully designed and constructed to eliminate sharp edges, minimise parts and provide trouble-free installation and use.\u003c\/p\u003e\u003cp\u003eAll parts are from high grade stainless steel and black or grey anodised aluminium for good looks and durability. Spare parts available.\u003c\/p\u003e","brand":"Barton Marine","offers":[{"title":"Default Title","offer_id":47479328964770,"sku":"106778","price":560.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/106778XL.jpg?v=1785228754"},{"product_id":"barton-boomstrut-black-f-boats-30-40-106779","title":"Barton Boomstrut - Black for Boats 30-40' MPN - 44041","description":"\u003cp\u003e\u003cstrong\u003eBoomstrut - Black for Boats 30-40'\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBoomstrut 44041 is designed for boats 10.5m – 12m (30ft – 40ft) in length with a maximum boom tip weight of 23kg (51 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom to keep the desired sail shape even in light winds. Manufactured with white rods and Spectro Anodised boom and mast fittings. The uplift created means that the boom will not fall onto the boat when either the sail is lowered, or the topping lift is released or removed. Suitable to be used with wooden, carbon fibre or aluminium spars..\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSix sizes to suit yachts up to 12m\/40ft LOA\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePatented flexing spring provides fast response and a constant force for vang efficiency\u003c\/p\u003e\u003cp\u003eThe boomstrut’s lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling the boom down with a conventional kicker causes the Boomstrut to flex; releasing straightens the rods, thereby lifting and supporting the boom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaintenance-free, durable design\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEliminates friction and sliding parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImproved performance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLess weight and windage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEasy installation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThere’s no need to replace your existing hardware – the Boomstrut mounts independently inside the existing kicking strap tackle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSimple to follow instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Boomstrut is supplied with complete fitting instructions and more comprehensive details are available here on our website.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMast fitting can use existing luff groove\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTo eliminate drilling, the Boomstrut’s mast bracket can be slotted into your mast’s luff groove.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eContoured boom fitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Boomstrut’s boom bracket is contoured to fit both round and flat boom profiles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCarefully designed \u0026amp; constructed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Barton Boomstrut has been carefully designed and constructed to eliminate sharp edges, minimise parts and provide trouble-free installation and use.\u003c\/p\u003e\u003cp\u003eAll parts are from high grade stainless steel and black or grey anodised aluminium for good looks and durability. Spare parts available.\u003c\/p\u003e","brand":"Barton Marine","offers":[{"title":"Default Title","offer_id":47479328932002,"sku":"106779","price":592.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/106779XL.jpg?v=1785228753"}],"url":"https:\/\/marinerswarehouse.com\/collections\/marine-boom-supports.oembed","provider":"Mariners Warehouse Shop","version":"1.0","type":"link"}