{"title":"Digital Yacht Marine Navigation and Network Gear","description":"\u003cp\u003eExplore Digital Yacht marine AIS, GPS and network equipment for navigation and onboard systems.\u003c\/p\u003e","products":[{"product_id":"digital-yacht-ais100-ais-receiver","title":"Digital Yacht AIS100 AIS Receiver MPN - ZDIGAIS100","description":"\u003cp\u003e\u003cb\u003eDigital Yacht AIS100 Receiver\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGAIS100\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eLow cost entry level AIS receiver\u003c\/li\u003e\n\u003cli\u003eHigh performance dual-channel AIS receiver for use with existing plotter and radar systems\u003c\/li\u003e\n\u003cli\u003eHigh speed NMEA output (38,400 baud)\u003c\/li\u003e\n\u003cli\u003eRequires VHF antenna or dedicated AIS antenna (available as optional accessory) or splitter\u003c\/li\u003e\n\u003cli\u003eEasy to install IP54 black box solution\u003c\/li\u003e\n\u003cli\u003eBNC antenna connector\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis value priced, entry level AIS receiver is Digital Yacht's most cost effective solution for adding AIS to your boat. Featuring the same dual channel receiver as the AIS100Pro, but without the USB interface and multiplexer, there is no compromise on performance and the AIS100 will out-perform all other, inferior, single channel receivers.\u003c\/p\u003e\u003cp\u003eFor use with existing AIS compatible chart plotters, such as the latest Garmin, Raymarine, Navico, Standard Horizon and Furuno units. Typical AIS reception range is 20 - 20 m for a mast top antenna.\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385149149346,"sku":"DIYZDIGAIS100","price":349.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGAIS100.jpg?v=1765303084"},{"product_id":"digital-yacht-gps160-trinav-gps-glonass-galileo-sensor-nmea0183","title":"Digital Yacht GPS160 Sensor for GPS, Galileo and Glonass Satellite Systems, NMEA0183 Output MPN - ZDIGGPS160","description":"\u003cp\u003e\u003cb\u003eDigital Yacht GPS160 Sensor for GPS, Galileo and Glonass Satellite Systems, NMEA0183 Output\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGGPS160\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e72 channel GPS, Glonass and Galileo GNSS positioning receiver\u003c\/li\u003e\n\u003cli\u003eTypically sub 1m accuracy thanks to TriNavTM technology -combines all satellite data for optimum accuracy\u003c\/li\u003e\n\u003cli\u003eCan be configured as dedicated GPS, Glonass or Galileo only device\u003c\/li\u003e\n\u003cli\u003eSophisticated anti-spoofing algorithm for robust positioning performance and interference rejection\u003c\/li\u003e\n\u003cli\u003eUser\/field selectable 4800, 38400 and 115200 baud operation through simple internal DIP switches\u003c\/li\u003e\n\u003cli\u003eMultiple formats of NMEA data output including datum information -user configurable through internal DIP switches\u003c\/li\u003e\n\u003cli\u003eUp to 18Hz update rate (user selectable)\u003c\/li\u003e\n\u003cli\u003eUltra low (\u0026lt;20mA) power consumption at 12V DC\u003c\/li\u003e\n\u003cli\u003e10m cable\u003c\/li\u003e\n\u003cli\u003eInput for MOB switch\/system -when activated generates synthetic AIS MOB NMEA output to activate MOB position on plotter\u003c\/li\u003e\n\u003cli\u003eProfessional system (ECDIS) support with datum sentence structure (DTM\/GBS\/GNS\/GRS\/GSA\/GST)\u003c\/li\u003e\n\u003cli\u003ePuck installation or fits 3rd party industry standard 1 in x 14TPI threaded mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDigital Yacht have unveiled their TriNavTM GPS160, a new, high performance positioning sensor using GPS, Glonass and the new Galileo satellite systems for exceptional positioning accuracies and redundancies. Typical accuracy is better than 1m and data can be set to output at up to 18Hz for smoother plotter track displays. TriNavTM software technology also improves positioning vulnerabilities that could occur through spoofing and local interference.\u003c\/p\u003e\u003cp\u003eThe device can be field programmed for a variety of modes such as single GNSS operation (eg Galileo only) as well as output configurations such as update rate, NMEA sentence structure etc\u003c\/p\u003e\u003cp\u003eThe GPS160 is available with a NMEA 0183 output (4800, 38400 and 115200 baud programmable) and a USB variant for PC, MAC and Linux. For NMEA 2000 systems, a bundle is available with a Digital Yacht iKonvert NMEA 2000 gateway allowing easy and flexible NMEA 2000 installation without the need for cumbersome drop cables.\u003c\/p\u003e\u003cp\u003eThe GPS160 also supports a simple external MOB (man-over-board) switch or device. When activated, the GPS160 creates a \"synthesised\" AIS SART MOB message on its NMEA output which can be interfaced with a local plotter for MOB identification. Most modern plotters support this with a clear MOB icon and instant bearing and distance information to navigate to the casualty.\u003c\/p\u003e\u003cp\u003eGalileo is the new global navigation satellite system (GNSS) that has been developed over the past two decades. It joins the GPS and GLONASS systems and offers mariners a 3rd reliable positioning source. It is planned to be fully operational in 2020.\u003c\/p\u003e\u003cp\u003eThere are currently 22 satellites in usable condition (satellite is operational and contributing to the service provision), 2 satellites are in \"testing\" and 2 more are marked as not available. The final constellation should be deployed by 2020 and will consist of 30 satellites (24 operational and 6 spares).\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385149706402,"sku":"DIYZDIGGPS160","price":209.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGGPS160.jpg?v=1765303088"},{"product_id":"digital-yacht-gps160-trinav-gps-glonass-galileo-sensor-nmea2000-ikonvert-bundle","title":"Digital Yacht GPS160 TriNav GPS. Glonass, Galileo Sensor NMEA2000 iKonvert Bundle MPN - ZDIGGPS160N2K","description":"\u003cp\u003e\u003cb\u003eDigital Yacht DIGGPS160N2K GPS160 supplied with iKonvert (NMEA2000-NMEA0183 converter)\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGGPS160N2K\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e72 channel GPS, Glonass and Galileo GNSS positioning receiver\u003c\/li\u003e\n\u003cli\u003eSupplied with iKonvert (NMEA2000-NMEA0183 converter) allowing easy and flexible NMEA 2000 installation\u003c\/li\u003e\n\u003cli\u003eTypically sub 1m accuracy thanks to TriNavTM technology -combines all satellite data for optimum accuracy\u003c\/li\u003e\n\u003cli\u003eCan be configured as dedicated GPS, Glonass or Galileo only device\u003c\/li\u003e\n\u003cli\u003eSophisticated anti-spoofing algorithm for robust positioning performance and interference rejection\u003c\/li\u003e\n\u003cli\u003eUser\/field selectable 4800, 38400 and 115200 baud operation through simple internal DIP switches\u003c\/li\u003e\n\u003cli\u003eMultiple formats of NMEA data output including datum information -user configurable through internal DIP switches\u003c\/li\u003e\n\u003cli\u003e10m cable\u003c\/li\u003e\n\u003cli\u003eUp to 18Hz update rate (user selectable)\u003c\/li\u003e\n\u003cli\u003eUltra low (\u0026lt;20mA) power consumption at 12V DC\u003c\/li\u003e\n\u003cli\u003eInput for MOB switch\/system -when activated generates synthetic AIS MOB NMEA output to activate MOB position on plotter\u003c\/li\u003e\n\u003cli\u003eProfessional system (ECDIS) support with datum sentence structure (DTM\/GBS\/GNS\/GRS\/GSA\/GST)\u003c\/li\u003e\n\u003cli\u003ePuck installation or fits 3rd party industry standard 1 in x 14TPI threaded mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDigital Yacht have unveiled their TriNavTM GPS160, a new, high performance positioning sensor using GPS, Glonass and the new Galileo satellite systems for exceptional positioning accuracies and redundancies. Typical accuracy is better than 1m and data can be set to output at up to 18Hz for smoother plotter track displays. TriNavTM software technology also improves positioning vulnerabilities that could occur through spoofing and local interference.\u003c\/p\u003e\u003cp\u003eThe device can be field programmed for a variety of modes such as single GNSS operation (eg Galileo only) as well as output configurations such as update rate, NMEA sentence structure etc\u003c\/p\u003e\u003cp\u003eThe GPS160 NMEA 2000 version is supplied with Digital Yacht iKonvert NMEA 2000 gateway allowing easy and flexible NMEA 2000 installation without the need for cumbersome drop cables. It allows an easy and thin 10m cable to be run from the GPS160 to the nearest point on the NMEA 2000 backbone for the iKonvert to connect to.\u003c\/p\u003e\u003cp\u003eThe GPS160 also supports a simple external MOB (man-over-board) switch or device. When activated, the GPS160 creates a \"synthesised\" AIS SART MOB message on its NMEA output which can be interfaced with a local plotter for MOB identification. Most modern plotters support this with a clear MOB icon and instant bearing and distance information to navigate to the casualty.\u003c\/p\u003e\u003cp\u003eGalileo is the new global navigation satellite system (GNSS) that has been developed over the past two decades. It joins the GPS and GLONASS systems and offers mariners a 3rd reliable positioning source. It is planned to be fully operational in 2020.\u003c\/p\u003e\u003cp\u003eThere are currently 22 satellites in usable condition (satellite is operational and contributing to the service provision), 2 satellites are in \"testing\" and 2 more are marked as not available. The final constellation should be deployed by 2020 and will consist of 30 satellites (24 operational and 6 spares).\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385149739170,"sku":"DIYZDIGGPS160N2K","price":399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGGPS160N2K.jpg?v=1765303089"},{"product_id":"digital-yacht-gps160-trinav-gps-glonass-galileo-sensor-seatalk-1-bundle","title":"Digital Yacht GPS160 TriNav GPS. Glonass, Galileo Sensor SeaTalk 1 Bundle MPN - ZDIGGPS160ST","description":"\u003cp\u003e\u003cb\u003eDigital Yacht GPS160ST SeaTalk version is supplied with Digital Yacht SeaTalk1 to NMEA0183 converter\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGGPS160ST\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e72 channel GPS, Glonass and Galileo GNSS positioning receiver\u003c\/li\u003e\n\u003cli\u003eSupplied with Digital Yacht SeaTalk1 to NMEA0183 converter allowing easy replacement of older Raystar sensors\u003c\/li\u003e\n\u003cli\u003eTypically sub 1m accuracy thanks to TriNavTM technology -combines all satellite data for optimum accuracy\u003c\/li\u003e\n\u003cli\u003eCan be configured as dedicated GPS, Glonass or Galileo only device\u003c\/li\u003e\n\u003cli\u003eSophisticated anti-spoofing algorithm for robust positioning performance and interference rejection\u003c\/li\u003e\n\u003cli\u003eUser\/field selectable 4800, 38400 and 115200 baud operation through simple internal DIP switches\u003c\/li\u003e\n\u003cli\u003eMultiple formats of NMEA data output including datum information -user configurable through internal DIP switches\u003c\/li\u003e\n\u003cli\u003e10m cable\u003c\/li\u003e\n\u003cli\u003eUp to 18Hz update rate (user selectable)\u003c\/li\u003e\n\u003cli\u003eUltra low (\u0026lt;20mA) power consumption at 12V DC\u003c\/li\u003e\n\u003cli\u003eProfessional system (ECDIS) support with datum sentence structure (DTM\/GBS\/GNS\/GRS\/GSA\/GST)\u003c\/li\u003e\n\u003cli\u003ePuck installation or fits 3rd party industry standard 1 in x 14TPI threaded mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePuck installation or fits 3rd party industry standard 1 in x 14TPI threaded mount\u003c\/p\u003e\u003cp\u003eThe device can be field programmed for a variety of modes such as single GNSS operation (eg Galileo only) as well as output configurations such as update rate, NMEA sentence structure etc\u003c\/p\u003e\u003cp\u003eThe GPS160 SeaTalk version is supplied with Digital Yacht SeaTalk1 to NMEA0183 converter allowing easy replacement of older Raystar sensors. Digital Yacht's SeaTalk to NMEA (ISO) Converter is a small but powerful interface that provides bi-directional conversion between a SeaTalk network and an NMEA0183 network. It takes its power from the SeaTalk1 network.\u003c\/p\u003e\u003cp\u003eGalileo is the new global navigation satellite system (GNSS) that has been developed over the past two decades. It joins the GPS and GLONASS systems and offers mariners a 3rd reliable positioning source. It is planned to be fully operational in 2020.\u003c\/p\u003e\u003cp\u003eThere are currently 22 satellites in usable condition (satellite is operational and contributing to the service provision), 2 satellites are in \"testing\" and 2 more are marked as not available. The final constellation should be deployed by 2020 and will consist of 30 satellites (24 operational and 6 spares).\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385149968546,"sku":"DIYZDIGGPS160ST","price":399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGGPS160ST.jpg?v=1765303091"},{"product_id":"digital-yacht-gps160-trinav-gps-glonass-galileo-sensor-usb-bundle","title":"Digital Yacht GPS160 TriNav GPS. Glonass, Galileo Sensor USB Bundle MPN - ZDIGGPS160USB","description":"\u003cp\u003e\u003cb\u003eDigital yacht DIGGPS160USB variant ships with a 5m USB cable\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGGPS160USB\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e72 channel GPS, Glonass and Galileo GNSS positioning receiver\u003c\/li\u003e\n\u003cli\u003eFitted with a 5M USB cable\u003c\/li\u003e\n\u003cli\u003eIt's self powered from the USB source (PC, MAC or Linux)\u003c\/li\u003e\n\u003cli\u003eTypically sub 1m accuracy thanks to TriNavTM technology -combines all satellite data for optimum accuracy\u003c\/li\u003e\n\u003cli\u003eCan be configured as dedicated GPS, Glonass or Galileo only device\u003c\/li\u003e\n\u003cli\u003eSophisticated anti-spoofing algorithm for robust positioning performance and interference rejection\u003c\/li\u003e\n\u003cli\u003eUser\/field selectable 4800, 38400 and 115200 baud operation through simple internal DIP switches\u003c\/li\u003e\n\u003cli\u003eMultiple formats of NMEA data output including datum information -user configurable through internal DIP switches\u003c\/li\u003e\n\u003cli\u003eUp to 18Hz update rate (user selectable)\u003c\/li\u003e\n\u003cli\u003eUltra low (\u0026lt;20mA) power consumption at 12V DC\u003c\/li\u003e\n\u003cli\u003eProfessional system (ECDIS) support with datum sentence structure (DTM\/GBS\/GNS\/GRS\/GSA\/GST)\u003c\/li\u003e\n\u003cli\u003ePuck installation or fits 3rd party industry standard 1 in x 14TPI threaded mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDigital Yacht have unveiled their TriNavTM GPS160, a new, high performance positioning sensor using GPS, Glonass and the new Galileo satellite systems for exceptional positioning accuracies and redundancies. Typical accuracy is better than 1m and data can be set to output at up to 18Hz for smoother plotter track displays. TriNavTM software technology also improves positioning vulnerabilities that could occur through spoofing and local interference.\u003c\/p\u003e\u003cp\u003eThe device can be field programmed for a variety of modes such as single GNSS operation (eg Galileo only) as well as output configurations such as update rate, NMEA sentence structure etc.\u003c\/p\u003e\u003cp\u003eThe GPS160USB variant ships with a 5m USB cable. It's self powered from the USB source (PC, MAC or Linux). When installed, a virtual COM port is created on the host PC so navigation programs can receive positioning data. If a longer cable or the MOB feature is required, it's best to utilise the GPS160 (standard NMEA version) with our USB-NMEA adaptor cable.\u003c\/p\u003e\u003cp\u003eGalileo is the new global navigation satellite system (GNSS) that has been developed over the past two decades. It joins the GPS and GLONASS systems and offers mariners a 3rd reliable positioning source. It is planned to be fully operational in 2020.\u003c\/p\u003e\u003cp\u003eThere are currently 22 satellites in usable condition (satellite is operational and contributing to the service provision), 2 satellites are in \"testing\" and 2 more are marked as not available. The final constellation should be deployed by 2020 and will consist of 30 satellites (24 operational and 6 spares).\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385150001314,"sku":"DIYZDIGGPS160USB","price":289.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGGPS160USB.jpg?v=1765303092"},{"product_id":"digital-yacht-ikonvert-nmea-2000-0183-gateway-converter-with-usb","title":"Digital Yacht iKonvert NMEA 2000\/0183 Gateway Converter with USB MPN - ZDIGIKVTUSB","description":"\u003cp\u003e\u003cb\u003eDgital Yacht DIGIKVTUSB NMEA2000 Gateway\/Converter\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGIKVTUSB\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eSmall but powerful bi-directional NMEA2000 Gateway\/Converter\u003c\/li\u003e\n\u003cli\u003ePowered from the NMEA2000 network\u003c\/li\u003e\n\u003cli\u003eHigh Speed USB 2.0 USB Interface (FTDI)v\u003c\/li\u003e\n\u003cli\u003eCompatible with Windows, OSX, LINUX and Android\u003c\/li\u003e\n\u003cli\u003eCan be configured to operate in \"Raw Mode\" (Binary PGN data)\u003c\/li\u003e\n\u003cli\u003eConverts all of the key navigational data\u003c\/li\u003e\n\u003cli\u003eIntegral USB (Type A) and NMEA2000 Micro (Male) cables\u003c\/li\u003e\n\u003cli\u003eSimple configuration of data modes using DIP switches\u003c\/li\u003e\n\u003cli\u003eFull galvanic isolation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe iKonvert NMEA2000-0183 Gateway\/Converter is an intelligent and flexible gateway for allowing software applications to read\/write NMEA2000 data, either as RAW binary PGN data for ultimate analysis and control or converted to the older and more commonly supported NMEA0183 data.\u003c\/p\u003e\u003cp\u003eEvery popular Marine Navigation application that runs on PC\/MAC\/LINUX computers, can read NMEA0183 data and for all of those programs, iKonvert provides a simple, reliable and cost effective way to access the navigation data on an NMEA2000 network. Simply set the DIP switches inside iKonvert to the required data mode that you want to use and iKonvert will extract the selected data from the NMEA2000 network and provide them to your marine application in a format and at a baud rate they support.\u003c\/p\u003e\u003cp\u003eFor developers creating new applications or who know how to decode NMEA2000 PGNs, iKonvert can be easily set to its \"RAW Mode\" where data can be read\/written to using a simple serial data format that we publish on our iKonvert Github site. No special libraries or proprietary code are required to integrate iKonvert, which has attracted the interest of a number of developers and it is already compatible with CanBoat and the popular Signal K Node Server.\u003c\/p\u003e\u003cp\u003eDigital Yacht's iKonvert Gateway is housed in a compact and easy to mount housing, with an integral USB cable and standard NMEA2000 Micro drop cable (male). Taking its power from the NMEA2000 network, and providing full galvanic isolation between the USB interface and NMEA2000 network, iKonvert operates at a baud rate of 230KB in \"RAW mode\" and 4.8KB, 38.4KB or 115KB in NMEA0183 conversion modes. All modes can be simply selected using the internal DIP switches with no special configuration software or firmware changes required.\u003c\/p\u003e\u003cp\u003eiKonvert's USB interface features an FTDI chip that has the most reliable and compatible USB drivers for all of the popular operating systems (Windows\/Mac\/LINUX\/Android), whilst an ISO Version of iKonvert will soon be released for direct connection between NMEA2000 and NMEA0183 systems.\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385150263458,"sku":"DIYZDIGIKVTUSB","price":259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGIKVTUSB.jpg?v=1765303094"},{"product_id":"digital-yacht-navlink-2-nmea-2000-wifi-gateway","title":"Digital Yacht Navlink 2 NMEA 2000 - WiFi Gateway MPN - ZDIGNLINK","description":"\u003cp\u003e\u003cb\u003eDigital Yacht NavLink 2 NMEA 2000 to Wifi server\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGNLINK\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eNMEA 2000 to Wifi server\u003c\/li\u003e\n\u003cli\u003eSelf powered from NMEA 2000 bus - fits in seconds\u003c\/li\u003e\n\u003cli\u003eSupports TCP\/IP and UDP connection modes\u003c\/li\u003e\n\u003cli\u003eProvides AIS, navigation and instrument data to apps\u003c\/li\u003e\n\u003cli\u003eCompatible with all popular apps like iNavX, TimeZero, Weather 4D, Navionics, SailGrib, NavLink, iSailor, SeaPilot, AquaMap etc\u003c\/li\u003e\n\u003cli\u003eUp to 7 connected devices\u003c\/li\u003e\n\u003cli\u003eCompatible with Windows, Linux, MAC OS, iOS and Android\u003c\/li\u003e\n\u003cli\u003eEasy web interface for programming\u003c\/li\u003e\n\u003cli\u003ePassword protected\u003c\/li\u003e\n\u003cli\u003eCan act as dedicated wireless server or can connect to an existing wireless network\u003c\/li\u003e\n\u003cli\u003eDiagnostic data display mode and LED status lights\u003c\/li\u003e\n\u003cli\u003eInternal hi gain wifi antenna\u003c\/li\u003e\n\u003cli\u003eSuper-fast 230KBs operation\u003c\/li\u003e\n\u003cli\u003eOptional raw data mode for developers and advanced users\u003c\/li\u003e\n\u003cli\u003eSupplied with NMEA 2000 cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNavLink 2 is an easy to fit NMEA 2000 to Wifi server designed to make NMEA 2000 navigation data available for apps on smartphones, tablets, iPads and PCs. It connects direct to the NMEA 2000 back bone and is also self-powered from the data network so installation literally takes seconds.\u003c\/p\u003e\u003cp\u003eOnce installed, it creates a local wifi network for devices to connect or can be programmed to join an existing wireless network if one is already installed. This is ideal for devices like the Furuno wireless radar which require operation through their own dedicated network but require NMEA 2000 data integration for charting apps. Now works with the popular Navionics Boating App for Apple iOS and Android to display GPS and AIS data on your Navionics charts.\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385150460066,"sku":"DIYZDIGNLINK","price":309.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGNLINK.jpg?v=1765303095"},{"product_id":"digital-yacht-spl1500-splitter-vhf-ais-from-one-antenna","title":"Digital Yacht SPL1500 Splitter VHF-AIS from One Antenna MPN - ZDIGSPL1500","description":"\u003cp\u003e\u003cb\u003eDigital Yacht SPL1500 AIS-VHF Antenna Splitter\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGSPL1500\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eEnables an existing VHF antenna to be used for both the standard VHF and AIS system\u003c\/li\u003e\n\u003cli\u003ePatented ZeroLossTM technology for exceptional performance\u003c\/li\u003e\n\u003cli\u003eWorks with all Class B transponders and receivers\u003c\/li\u003e\n\u003cli\u003eSupplied with power cable, PL259-PL259 cable assembly and BNC-BNC cable assembly for easy installation (all cables 0.75m long)\u003c\/li\u003e\n\u003cli\u003e12v or 24v 0peration and low power consumption\u003c\/li\u003e\n\u003cli\u003eFail safe operation\u003c\/li\u003e\n\u003cli\u003eSame size and design as the AIT1500\u003c\/li\u003e\n\u003cli\u003eMakes installation of an AIS receiver or transponder very quick and simple\u003c\/li\u003e\n\u003cli\u003eSaves on additional antenna clutter\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAn AIS receiver or transponder requires a VHF antenna, but Digital Yacht's new SPL1500 AIS-VHF antenna splitter allows an existing antenna to be used for both the AIS and VHF (DSC). Unlike most simple splitters, it can also be used with a class B transponder system and it incorporates special circuitry to ensure safe operation of the two transmitting devices.\u003c\/p\u003e\u003cp\u003eThe unit has three simple connections - one input for the main VHF antenna and then outputs for the AIS receiver\/transponder and another for the DSC VHF. It utilises Digital Yacht's new, patented, ZeroLossTM technology, to ensure the very best possible reception and transmission from all devices. Most importantly it is also fail safe, so should the unit ever stop working or lose power, it will not affect the main VHF operation. Until now, Digital Yacht, have recommended a dedicated antenna for a receiver or transponder.However, with the new this new ZeroLoss TM technology, we can now offer a solution that greatly simplifies installation whilst maintaining performance.\u003c\/p\u003e\u003cp\u003eThe unit is waterproof and matches the aesthetics of the current AIT1500, so can easily be integrated into any vessel. It is suitable for operation on 12V or 24V systems and features three status LEDs that show the unit is powered correctly and when the AIS or VHF transmits.\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385150722210,"sku":"DIYZDIGSPL1500","price":429.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGSPL1500.jpg?v=1765303097"},{"product_id":"digital-yacht-spl2000-splitter-vhf-ais-from-one-antenna-with-fm","title":"Digital Yacht SPL2000 Splitter VHF-AIS from One Antenna with FM MPN - ZDIGSPL2000","description":"\u003cp\u003e\u003cb\u003eDigital Yacht DIGSPL2000 AIS\/VHF\/FM Antenna Splitter\u003c\/b\u003e\u003c\/p\u003eModel: DIGSPL2000\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eEnables an existing VHF antenna to be used for both the standard VHF and AIS system\u003c\/li\u003e\n\u003cli\u003ePatented ZeroLossTM technology for exceptional performance\u003c\/li\u003e\n\u003cli\u003eWorks with all Class B transponders and receivers\u003c\/li\u003e\n\u003cli\u003eSupplied with power cable, PL259-PL259 cable assembly and BNC-BNC cable assembly for easy installation (all cables 0.75m long)\u003c\/li\u003e\n\u003cli\u003eAM-FM radio antenna connection for standard car stereo radio (integrated in power cable)\u003c\/li\u003e\n\u003cli\u003e12v or 24v 0peration and low power consumption\u003c\/li\u003e\n\u003cli\u003eFail safe operation\u003c\/li\u003e\n\u003cli\u003eSame size and design as the new AIT2000\u003c\/li\u003e\n\u003cli\u003eMakes installation of an AIS receiver or transponder very quick and simple\u003c\/li\u003e\n\u003cli\u003eSaves on additional antenna clutter\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAn AIS receiver or transponder requires a VHF antenna, but Digital Yacht's new SPL2000 AIS-VHF antenna splitter allows an existing antenna to be used for both the AIS and VHF (DSC) and even with an AM\/FM radio. Unlike most simple splitters, it can also be used with a class B transponder system and it incorporates special circuitry to ensure safe operation of the two transmitting devices.\u003c\/p\u003e\u003cp\u003eThe unit has four simple connections - one input for the main VHF antenna and then outputs for the AIS receiver\/transponder, DSC VHF as well as an optional car radio output. It utilises Digital Yacht's new, patented, ZeroLossTM technology, to ensure the very best possible reception and transmission from all devices. Most importantly it is also fail safe, so should the unit ever stop working or lose power, it will not affect the main VHF operation. Until now, Digital Yacht, have recommended a dedicated antenna for a receiver or transponder.However, with the new this new ZeroLoss TM technology, we can now offer a solution that greatly simplifies installation whilst maintaining performance.\u003c\/p\u003e\u003cp\u003eThe unit is waterproof and matches the aesthetics of the current range of transponders and receivers, so can easily be integrated into any vessel. It is suitable for operation on 12V or 24V systems and features three status LEDs that show the unit is powered correctly and when the AIS or VHF transmits.\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385150754978,"sku":"DIYZDIGSPL2000","price":459.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGSPL2000.jpg?v=1765303097"},{"product_id":"digital-yacht-seatalk-to-nmea-converter","title":"Digital Yacht SeaTalk to NMEA Converter MPN - ZDIGSTN","description":"\u003cp\u003e\u003cb\u003eDigital Yacht DIGSTN Data Converter for any Legacy Autohelm or Raymarine System\u003c\/b\u003e\u003c\/p\u003eModel: DIGSTN\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eSmall but powerful bi-directional converter\u003c\/li\u003e\n\u003cli\u003ePowered from the SeaTalk network\u003c\/li\u003e\n\u003cli\u003eFeatures reliable multi-stage transistor SeaTalk interface\u003c\/li\u003e\n\u003cli\u003eOpto-isolated NMEA0183 input and differential NMEA0183 output\u003c\/li\u003e\n\u003cli\u003eCan be configured to operate in \"Raw Data\" mode ($STALK)\u003c\/li\u003e\n\u003cli\u003eConverts all of the key navigational data\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe SeaTalkTM interface, originally developed by Autohelm in the early 1990's, was included on pretty much all Autohelm and Rarmarine (and some Raytheon) products up until about 2012. As a result there are thousands and thousands of boats around the world that have a SeaTalk 1 network and many owners, for one reason or another, need to convert from SeaTalk to NMEA0183.\u003c\/p\u003e\u003cp\u003eRaymarine's own SeaTalk to NMEA converter (E85001) is no longer available, and although some instruments\/MFDs\/autopilots have NMEA0183 interfaces, they do not always convert all of the data or are located in a difficult to wire to location.\u003c\/p\u003e\u003cp\u003eDigital Yacht's SeaTalk to NMEA (ISO) Converter is a small but powerful interface that provides bi-directional conversion between a SeaTalk network and an NMEA0183 network or device. Taking its power from the SeaTalk network, the ST-NMEA Converter features a full, multi-transistor SeaTalk 1 interface, an opto-isolated NMEA0183 input and differential NMEA0183 output that allows key navigational data to be reliably shared between the SeaTalk and NMEA0183 networks.\u003c\/p\u003e\u003cp\u003eFor developers and advanced users that want to access the raw SeaTalk data, the ST-NMEA converter can also be configured to work in a special \"Raw Data\" mode ($STALK) which is gaining support in some Open Source projects.\u003c\/p\u003e\u003cp\u003eThe ST-NMEA (ISO) Converter is ideal for connection to one of Digital Yacht's wireless NMEA servers, allowing SeaTalk owners to go wireless and a USB Version of the ST-NMEA Converter is also available for direct connection to a PC or Mac.\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385151017122,"sku":"DIYZDIGSTN","price":259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGSTN.jpg?v=1765303099"},{"product_id":"digital-yacht-wln10sm-smart-nmea-wifi-adapter-4800-38400-baud","title":"Digital Yacht WLN10SM Smart NMEA-WiFi Adapter 4800\/38400 Baud MPN - ZDIGWLN10SM","description":"\u003cp\u003e\u003cb\u003eDigital yacht DIGWLN10SM Smart NMEA to WiFi gateway\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGWLN10SM\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eNMEA 0183 to WiFi server (4800 baud or 38400 baud)\u003c\/li\u003e\n\u003cli\u003eWeb interface for setup and initial programming\u003c\/li\u003e\n\u003cli\u003eSet baud rate, SSID and password through web interface\u003c\/li\u003e\n\u003cli\u003eSupports both UDP (for multiple connections) and TCP\/IP interfaces\u003c\/li\u003e\n\u003cli\u003eView NMEA data received for easy fault finding of issues.\u003c\/li\u003e\n\u003cli\u003eSupports a bi directional Wi-Fi interface\u003c\/li\u003e\n\u003cli\u003eFully compatible with popular navigation apps and software\u003c\/li\u003e\n\u003cli\u003eEasy to install IPX4 black box solution\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDigital Yacht's new WLN10 Smart NMEA to WiFi gateway takes iPad and tablet integration afloat even further with the ability to connect to existing on board GPS, AIS and instrument systems and transfer data wirelessly to an iPad or tablet - allowing compatible apps to display and compute with real time information. The WLN10 creates a secure, password protected wifi network on board to footprint the boat with data.\u003c\/p\u003e\u003cp\u003eWhen connected to, for example, an AIS system, real time AIS target positions and identity data will be displayed on detailed electronic charting through compatible apps including NavLink, TimeZero, iAIS, iSailor, Seapilot and hundreds more. The tablet becomes a full function navigation display.\u003c\/p\u003e\u003cp\u003eThis new version of the WLN10 can now be programmed through its simple browser interface for NMEA 0183 data at 4800 or 38400 baud and for initial programming: Just logon to the IP address and you can set baud rate, SSID and password. No complicated programming! Through the web interface, you can also view NMEA data received for easy fault finding of issues.\u003c\/p\u003e\u003cp\u003eThe WLN10 Smart supports both UDP (for multiple connections) and TCP\/IP interfaces for maximum compatibility with apps so you can be using a PC at the chart table with an iPad on deck. It's also bidirectional so apps can control an autopilot if this function is enabled.\u003c\/p\u003e\u003cp\u003eThe Smart WLN10 has one NMEA0183 input which can be configured through the web interface. You can also utilise our SeaTalk to NMEA adaptor to allow SeaTalk instrument data to be interfaced directly to the WLN10 Smart. Now works with the popular Navionics Boating App for Apple iOS and Android to display GPS and AIS data on your Navionics charts.\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385151213730,"sku":"DIYZDIGWLN10SM","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGWLN10SM.jpg?v=1765303100"},{"product_id":"digital-yacht-nmea-usb-adaptor","title":"Digital Yacht NMEA-USB Adaptor MPN - ZDIGUSBNMEA","description":"\u003cp\u003e\u003cb\u003eDigital Yacht NMEA to USB Adaptor\u003c\/b\u003e\u003c\/p\u003eModel: DIGUSBNMEA\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eConverts NMEA0183 into USB so that your computer can read the data\u003c\/li\u003e\n\u003cli\u003eBidirectional data conversion\u003c\/li\u003e\n\u003cli\u003eUse with our GPS150 for PC integration\u003c\/li\u003e\n\u003cli\u003eLow cost simple solution\u003c\/li\u003e\n\u003cli\u003eMore than one adaptor can be fitted to the computer\u003c\/li\u003e\n\u003cli\u003e4800, 9600, 38400 and 115200 baud compatible\u003c\/li\u003e\n\u003cli\u003eBuilt-in indicator lights flash to show data is being received and transmitted\u003c\/li\u003e\n\u003cli\u003eEasy plug and play connection to most computers\u003c\/li\u003e\n\u003cli\u003eComes with a driver CD and a free copy of SmarterTrack Lite AIS software\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe NMEA to USB Adaptor works on PCs, Macs and Linux computers, and converts NMEA 0183 data, used by many marine systems, into a USB format that can be plugged into most modern computers. The adaptor is a bi-directional device so data can be sent to and from systems and supports traditional 4800 baud data or the higher speed 38400 baud rate used by AIS systems. LEDs show data being received and transmitted which helps with interfacing issues and all the electronics are encapsulated into the connector.\u003c\/p\u003e\u003cp\u003eThe device creates a virtual COM port on the PC which navigation and charting software can use to read NMEA data. Multiple adaptors can be connected if necessary which effectively allow any number of NMEA ports to be created on your PC. The device ships with a multi platform driver CD so it can be used on PCs, MACs and even Linux based systems. If you're using the device with an AIS, you'll get a bonus as SmarterTrack Lite AIS viewing software is included on the CD - effectively turning your PC into an AIS target display.\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385157341346,"sku":"DIYZDIGUSBNMEA","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGUSBNMEA.jpg?v=1765303142"},{"product_id":"digital-yacht-navdoctor-nmea2000-dianostic-monitor","title":"Digital Yacht NAVDOCTOR NMEA2000 Dianostic Monitor MPN - ZDIGNAVDOC","description":"\u003cp\u003e\u003cb\u003eDigital Yacht NavDoctor NMEA2000 Diagnostic tool\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGNAVDOC\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eNMEA 2000 Diagnostic Tool\u003c\/li\u003e\n\u003cli\u003eSelf powered from NMEA 2000 bus - fits in seconds\u003c\/li\u003e\n\u003cli\u003eCreates its own wireless network on the boat or can join an existing network in the workshop\u003c\/li\u003e\n\u003cli\u003eNo apps required, NAVDoctor's simple web interface displays in your browser\u003c\/li\u003e\n\u003cli\u003eLists all devices on the NMEA network and all PGNs being transmitted\u003c\/li\u003e\n\u003cli\u003eHealth page gives you an immediate snapshot of the networks key performance parameters\u003c\/li\u003e\n\u003cli\u003eCan log all data to text file for in-depth analysis\u003c\/li\u003e\n\u003cli\u003eGenerates a Network Health Report that you can either print or save to PDF\u003c\/li\u003e\n\u003cli\u003eYou can give a health report to the customer or you can retain for your own installation records\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\"NAVDoctor is the perfect NMEA 2000 diagnostic tool for dealers, installers and boat builders. It turns any mobile device in to an NMEA 2000 network analyser, creating simple and clear web pages that show the health and status of your NMEA 2000 network.\"\u003c\/p\u003e\u003cp\u003eNAVDoctor is a portable NMEA 2000 network diagnostic tool\/tester. It allows you to quickly check and diagnose the NMEA 2000 network. It combines the functionality of existing NMEA 2000 display programs and test equipment into a single, cost effective, simple plug 'n play box.\u003c\/p\u003e\u003cp\u003eIt's self powered from the network and creates a local wifi point for a mobile phone, tablet or PC to connect. Once connected, you simply access functions through a web browser so there's no complicated software to install.\u003c\/p\u003e\u003cp\u003eNMEA 2000 networks are based on a robust Canbus architecture, but one bad device, cable or termination can have a detrimental effect on performance. Fault finding can be time consuming and tricky, so having a NAVDoctor in your toolkit, will save you time, money and frustration.\u003c\/p\u003e\u003cp\u003eNAVDoctor is an essential tool for every marine electronics technician or installer and also offers the capability of printing a network health check certificate to validate an installation and improve customer service.\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385187815586,"sku":"DIYZDIGNAVDOC","price":499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGNAVDOC.jpg?v=1765303541"},{"product_id":"digital-yacht-ikonvert-nmea-2000-0183-gateway-converter","title":"Digital Yacht iKonvert - NMEA2000 to NMEA0183 Converter (ISO) MPN - ZDIGIKVT","description":"\u003cp\u003e\u003cb\u003eDigital Yacht iKonvert - NMEA2000 to NMEA0183 Converter (ISO)\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGIKVT\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eSmall but powerful bi-directional NMEA0183 to NMEA2000 Converter\u003c\/li\u003e\n\u003cli\u003ePowered from the NMEA2000 network\u003c\/li\u003e\n\u003cli\u003eOpto Isolated NMEA0183 Interface\u003c\/li\u003e\n\u003cli\u003eConverts AIS, GPS, Navigation, Instrument and XDR data\u003c\/li\u003e\n\u003cli\u003eFeatures \"Real Life\" data modes for most common installations\u003c\/li\u003e\n\u003cli\u003eSimple configuration of data modes using DIP switches\u003c\/li\u003e\n\u003cli\u003eIntegral NMEA0183 cable and NMEA2000 Micro (Male) cables\u003c\/li\u003e\n\u003cli\u003eFull galvanic isolation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe iKonvert NMEA0183 to NMEA2000 Converter\/Gateway is an intelligent and flexible gateway. Therefore allowing for new NMEA2000 equipment to talk to legacy NMEA0183 equipment. Conversions are bi-directional. For example, you may want to get the data from older NMEA0183 sensors on to your NMEA2000 network. Another reason being you have a new NMEA2000 only MFD and want GPS and Navigation data sent to your older NMEA0183 VHF and Autopilot. iKonvert can be used to accurately and intelligently carry out the required data conversions.\u003c\/p\u003e\u003cp\u003eReal life applications could include connecting together a number of different makes and models of equipment plus many more. iKonvert has been designed to satisfy as many of these situations as possible. As a result, we have built in a simple but effective mode selection method, via a set of DIP switches inside iKonvert. Just remove two screws, open the iKonvert box and select the mode you need with a small screwdriver. The next time iKonvert powers up, it will automatically carry out the conversions you selected.\u003c\/p\u003e\u003cp\u003eA number of modes already defined include; Heading, Sounder, AIS, GPS, Wind, Instruments and an all data gateway mode. This automatically sets the conversions to be done and the baud rate iKonvert will use. Furthermore, if you need a mode that we have not defined yet, just let us know and we will consider including it.\u003c\/p\u003e\u003cp\u003eThe iKonvert Gateway is compact and its housing is easy to mount. It features an integral NMEA0183 cable and standard NMEA2000 Micro drop cable (male). In addition, it takes its power from the NMEA2000 network. It also provides full galvanic isolation between the NMEA0183 and NMEA2000 networks. Hence, iKonvert is the perfect solution for all NMEA conversions.\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385194729634,"sku":"DIYZDIGIKVT","price":259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGIKVT.jpg?v=1765303673"},{"product_id":"digital-yacht-4g-connect-2g-3g-4g-internet-access-gateway-with-dual-antennas","title":"Digital Yacht 4G Connect 2G\/3G\/4G Internet Access Gateway with Dual Antennas MPN - ZDIG4GCPRO","description":"\u003cp\u003e\u003cb\u003eDigital Yacht 4G Connect Pro 2G\/3G\/4G (LTE) internet access solution\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e ZDIG4GC-PRO\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHi performance 4G\/LTE modem for exceptional speed and range with fall back to 2G\/3G\u003c\/li\u003e\n\u003cli\u003eSIM unlocked for AT\u0026amp;T and T-Mobile\u003c\/li\u003e\n\u003cli\u003eLTE Class 3 modem offers long range and up to 70Mbps speeds\u003c\/li\u003e\n\u003cli\u003eRecommended solution for offshore use and non GRP vessels\u003c\/li\u003e\n\u003cli\u003eWifi interface for tablets and phones\u003c\/li\u003e\n\u003cli\u003eEthernet LAN port for connection to iKommunicate navigation interface - allows boat NMEA 0183\/2000 data to be available on the wifi network - ideal for smartphone and tablet navigation\u003c\/li\u003e\n\u003cli\u003eEthernet WAN port can connect to satellite or WL510 high power wifi system for combination LTE\/WiFi hotspot solution\u003c\/li\u003e\n\u003cli\u003e12V DC operation with \u0026lt;5W power consumption\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eWhat's in the Box:\u003c\/b\u003e\u003cul\u003e\n\u003cli\u003eLTE Class 3 modem\u003c\/li\u003e\n\u003cli\u003eSIM unlocked for AT\u0026amp;T and T-Mobile\u003c\/li\u003e\n\u003cli\u003e2 x high performance external 48cm antennas\u003c\/li\u003e\n\u003cli\u003e23 ft (7m) low loss LMR 200 cable kit included\u003c\/li\u003e\n\u003cli\u003e2 x deck base for antennas\u003c\/li\u003e\n\u003cli\u003einternal Wi-Fi antenna\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385235951778,"sku":"DIYZDIG4GCPRO","price":939.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIG4GCPRO.jpg?v=1765304424"},{"product_id":"digital-yacht-nmea2000-starter-kit","title":"Digital Yacht NMEA2000 Starter Kit MPN - ZDIGN2KIT","description":"\u003cp\u003e\u003cb\u003eDigital yacht NMEA2000 Starter Kit\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGN2KIT\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eNMEA2000 starter kit - Everything you need in one box\u003c\/li\u003e\n\u003cli\u003eMetal connectors and reduced T-Piece connections, improve reliability\u003c\/li\u003e\n\u003cli\u003eStandard \"Micro C\" connectors make it very easy for future network expansion\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNMEA2000 has now become the de-facto standard throughout the marine electronics industry for interconnection of devices. It uses a simple backbone (or sometimes called \"trunk\") structure with requires terminators at each end of the cabling and then each device can be spurred off using a drop cable. The bus also requires power. Furthermore, waterproof connectors are used throughout for maximum reliability and it makes for an easy plug 'n play installation. Therefore Digital Yacht introduced the NMEA2000 cable starter kit.\u003c\/p\u003e\u003cp\u003eDigital Yacht's NMEA2000 cable starter kit allows for up to 3 devices to interconnect - say AIS, plotter and autopilot and comes complete with terminators and a power cable. It uses the high quality, nickel plated metal style connectors rather than the cheaper plastic type which can prove unreliable. The backbone is formed from a unique 6 way extension block with ports at each end that accommodate the terminators. Therefore allowing for a really neat and compact installation - ideal for behind the helm. It's suitable for DIY installers as well as boat builders who want an easy and value priced solution for integrating and installing modern boat electronics.\u003c\/p\u003e\u003cp\u003eThe connection system will work with all leading brands and can be expanded using standard components as required.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eWhat's in the Box:\u003c\/b\u003e\u003cul\u003e\n\u003cli\u003eSmart 4-Way T-Piece \"Backbone\"\u003c\/li\u003e\n\u003cli\u003e1m (3ft) Power Cable with in-line fuse\u003c\/li\u003e\n\u003cli\u003e1m (3ft) \"Drop Cable\"\u003c\/li\u003e\n\u003cli\u003ePair of removable network terminators\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385274093730,"sku":"DIYZDIGN2KIT","price":139.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGN2KIT.jpg?v=1765305146"},{"product_id":"digital-yacht-enginelink-nmea-2000-wifi-gateway","title":"Digital Yacht ENGINELINK NMEA 2000 - WiFi Gateway MPN - ZDIGELINK","description":"\u003cp\u003e\u003cb\u003eDigital Yacht ENGINELINK Wireless Engine Interface\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGELINK\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eWireless gateway for NMEA 2000 networks with integrated engine instrument displays\u003c\/li\u003e\n\u003cli\u003eCompatible with engines\/outboards with NMEA 2000 capability\u003c\/li\u003e\n\u003cli\u003eSecure, password protected wifi network or connect to existing boat wifi network\u003c\/li\u003e\n\u003cli\u003eDisplays for popular parameters like RPM, battery voltage, temperature, pressure, fuel,etc\u003c\/li\u003e\n\u003cli\u003eDedicated electric engine display page\u003c\/li\u003e\n\u003cli\u003eSupport for single or dual engines\u003c\/li\u003e\n\u003cli\u003eSimply connect to backbone and connect iPad, smart phone, tablet, PC or MAC via wifi - any device with a browser can display the instrument dash!\u003c\/li\u003e\n\u003cli\u003eStreams real time AIS and GPS data to other apps such as Navionics too for precision boat GPS data and AIS overlay\u003c\/li\u003e\n\u003cli\u003eDisplays data from NMEA 2000 compatible Trim Tabs and Jack Plates\u003c\/li\u003e\n\u003cli\u003eEasily updateable as engines offer more parameters\u003c\/li\u003e\n\u003cli\u003eLogging capability for diagnostics\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eENGINELink is a new NMEA 2000 wireless gateway that allows mobile phones and tablets to display engine data (utilising a NMEA 2000 interface) as well as providing a feed of AIS and GPS data to popular apps like Navionics, NavLink, iNavX, SavyNavy, AquaMaps and more. Now boaters can have engine data plus their favourite charting app displays on their connected devices.\u003c\/p\u003e\u003cp\u003eEngine information such as RPM, temperature, pressure and battery voltage are displayed as an attractive dashboard display through the web browser on the mobile device so there's no need for a custom app. iOS and Android devices can display app data and a web browser page side by side so you can have your favourite charting app open alongside engine instrument displays.\u003c\/p\u003e\u003cp\u003eSetup and installation is easy. Just \"T\" into the NMEA 2000 backbone and ENGINELink is self powered from the network. It creates a secure, password protected local wifi network with up to 7 devices able to connect simultaneously. UDP and TCP\/IP protocols are supported too for compatibility with 3rd party apps.\u003c\/p\u003e\u003cp\u003eMost modern outboards and engines have an NMEA 2000 interface or the ability to add as an accessory and ENGINELink has preset dashboards for popular manufacturers including Honda, Suzuki, Tohatsu, Mercury, Yamaha, Yanmar and Volvo. In addition, ENGINELink has a dashboard for the new generation of electric engines, that displays current consumption and battery capacity.\u003c\/p\u003e\u003cp\u003eEither single or dual engine installations are currently supported and ENGINELink will work with any \"NMEA 2000 ready\" engine. If the vessel is fitted with NMEA 2000 compatible Trim Tabs or Jack Plates, then the status of these performance critical accessories are also displayed on the dashboard.\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385284874402,"sku":"DIYZDIGELINK","price":309.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGELINK.jpg?v=1765305260"},{"product_id":"digital-yacht-gv30-vhf-ais-gps-antenna","title":"Digital Yacht GV30 VHF\/AIS GPS Antenna with 2 x 10m Cables MPN - ZDIGGV30","description":"\u003cp\u003e\u003cb\u003eDigital Yacht GV30 VHF\/AIS GPS Antenna with 2 x 10m Cables\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGGV30\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eCombination AIS\/VHF and GPS antenna\u003c\/li\u003e\n\u003cli\u003eSpecifically tuned to 162MHz\u003c\/li\u003e\n\u003cli\u003eHigh gain GPS element\u003c\/li\u003e\n\u003cli\u003eSupplied with 2 x 10m cable tails fitted with mini connectors for easy cable installation\u003c\/li\u003e\n\u003cli\u003eStandard 1 in threaded base for compatibility with a variety of mounts available here\u003c\/li\u003e\n\u003cli\u003eSupplied with TNC (GPS) and BNC (AIS) adaptors\u003c\/li\u003e\n\u003cli\u003eUnder 8 inches high for low profile installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA Class B AIS transponder requires a dedicated GPS antenna (all Class B units must have their own internal GPS and can't use an external feed for regulatory purposes) as well as a VHF antenna or suitable VHF-AIS antenna splitter. The GV30 is a combination VHF\/AIS and GPS antenna with twin coax feeds (33ft).\u003c\/p\u003e\u003cp\u003eIt's fitted with a standard 1 in threaded base so will mount onto a variety of deck, pole and rail attachments sold separately. The 33ft coax cables are terminated with a FME mini connector which makes running the cable easy as the connector is barely bigger than the 5mm cable. We then supply suitable adaptors for the TNC and BNC connectors on our AIT2000. The GV30 is just 7 inches high and 3 inches in diameter.\u003c\/p\u003e\u003cp\u003eDespite its compact dimensions, it offers very good performance as its specifically tuned to 162MHz (AIS frequency). The GV30 is also available with the AIT2000 as a bundle.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eWhat's in the Box:\u003c\/b\u003e\u003cul\u003e\n\u003cli\u003eGV30 Antenna\u003c\/li\u003e\n\u003cli\u003e2 x 10m Cable with FME Connectors\u003c\/li\u003e\n\u003cli\u003eTNC Adaptor\u003c\/li\u003e\n\u003cli\u003eBNC Adaptor\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385285005474,"sku":"DIYZDIGGV30","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGGV30.jpg?v=1765305263"},{"product_id":"digital-yacht-iseasense-bm100-battery-monitoring-system","title":"Digital Yacht BM100 battery Monitoring System for NMEA2000 Systems MPN - ZDIGISSBM100","description":"\u003cp\u003e\u003cb\u003eDigital Yacht BM100 battery Monitoring System for NMEA2000 Systems\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGISSBM100\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eBluetooth interface for setup and detailed analysis including charge\/discharge cycles, state of charge, remaining capacity and historical data\u003c\/li\u003e\n\u003cli\u003eUse your phone\/tablet and your NMEA 2000 devices for battery monitoring and management\u003c\/li\u003e\n\u003cli\u003e500A SmartShunt included for main battery system\u003c\/li\u003e\n\u003cli\u003eMonitor voltage of a separate (eg starter) battery\u003c\/li\u003e\n\u003cli\u003eUniversal NMEA 2000 gateway for Victron's popular range of smart battery monitors\/SmartShunt using VE.Direct interface (see compatibility list in the FAQ tab)\u003c\/li\u003e\n\u003cli\u003eEnables electrical and battery monitoring and management on compatible multi functions displays (Raymarine, Garmin, Navico, Furuno etc)\u003c\/li\u003e\n\u003cli\u003eProvides battery voltage and charge\/discharge current, state of charge and time to depletion based on sophisticated algorithm\u003c\/li\u003e\n\u003cli\u003eEasy installation, plug 'n play connectivity and self-powered from the NMEA 2000 bus\u003c\/li\u003e\n\u003cli\u003eSupports alerts generated by the SmartShunt\u003c\/li\u003e\n\u003cli\u003eSupports multiple SmartShunts for multi battery systems\u003c\/li\u003e\n\u003cli\u003eAlso compatible with other VE.Direct products such as solar MPPT controllers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe BM100 is a complete system comprising SmartShunt and veKonvert NMEA 2000 interface. It is part of Digital Yacht's iSeaSense range of NMEA 2000 boat instruments. With this solution, your multi function display becomes a sophisticated battery and energy management system.\u003c\/p\u003e\u003cp\u003eDigital Yacht's new BM100 battery monitoring system allows highly accurate DC voltage, current and capacity measurements enabling reliable monitoring of your boat's battery and electrical system.\u003c\/p\u003e\u003cp\u003eCore to the system is the SmartShunt. It measures battery voltage and current. Based on these measurements, it intelligently calculates the battery's state of charge and the time to depletion for the remaining charge. It also keeps track of historical data, such as deepest discharge and average discharge current as well as the number of charge and discharge cycles. The smart shunt can also monitor the voltage of a 2nd battery - typically dedicated to engine starting.\u003c\/p\u003e\u003cp\u003eThe system features a NMEA 2000 interface so your navigation multi-function display or plotter can display all key parameters. Modern MFDs from leading manufacturers such as Garmin, Raymarine, Furuno and Navico allow electrical battery data to be displayed via their NMEA 2000 interface. Alarms and alerts for low capacity and voltage can also be enabled.\u003c\/p\u003e\u003cp\u003eThe BM100 also has a standalone wireless Bluetooth interface so your mobile phone or iPad can connect and display current, voltage, capacity, additional historical data, state of charge information and time to go based on remaining battery capacity.\u003c\/p\u003e\u003cp\u003eThe product is a collaboration between Victron Energy and Digital Yacht. The system utilises Victron's proprietary VE.Direct data connectivity as a source for the NMEA 2000 data.\u003c\/p\u003e\u003cp\u003eThe BM100 is part of a wider group of products now introduced by Digital Yacht which bring NMEA 2000 connectivity to Victron systems using the VE.Direct interface.\u003c\/p\u003e\u003cp\u003eVictron solar panel controllers (MPPTs) and battery monitors can now also interconnect to NMEA 2000 via the veKonvert interface.\u003c\/p\u003e\u003cp\u003eWe're increasingly reliant on DC battery electrical power while afloat for lighting, refrigeration, pumps, winches etc so having accurate battery information and monitoring charge from various sources is essential. The service life of batteries depends on many factors. Battery life may be shortened by under-charging, over-charging, excessively deep discharges, excessive charge or discharge currents, and by high ambient temperature.\u003c\/p\u003e\u003cp\u003eMonitoring the battery with the BM100 will give important feedback to the user so that remedial measures can be taken when necessary. Doing this will extend battery life. There's also an optional battery temperature sensor available.\u003c\/p\u003e\u003cp\u003eThe BM100 can also integrate with Digital Yacht's other NMEA 2000 and wireless instruments which offer a hybrid NMEA 2000 and wireless display options.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eWhat's in the Box:\u003c\/b\u003e\u003cul\u003e\n\u003cli\u003eveKonvert interface\u003c\/li\u003e\n\u003cli\u003e500A Victron Shunt\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385351164066,"sku":"DIYZDIGISSBM100","price":439.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGISSBM100.jpg?v=1765306244"},{"product_id":"digital-yacht-net-protect-nmea2000-network-guard-and-ids","title":"Digital Yacht NET Protect NMEA2000 Network Guard and IDS MPN - ZDIGN2KPROT","description":"\u003cp\u003e\u003cb\u003eDigital Yacht Net Protect - Cyber Security System\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGN2KPROT\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eWorld's first NMEA 2000 Cyber Security Device\u003c\/li\u003e\n\u003cli\u003eTests \u0026amp; validates the NMEA 2000 network during installation\u003c\/li\u003e\n\u003cli\u003eAllows configuration of other NMEA 2000 devices\u003c\/li\u003e\n\u003cli\u003eView and analyse the NMEA 2000 network with device and PGN displays plus raw data logging\u003c\/li\u003e\n\u003cli\u003e24\/7 monitoring of the NMEA 2000 network\u003c\/li\u003e\n\u003cli\u003eIntegrated WiFi antenna can create its own WiFi network or join vessel's wireless network\u003c\/li\u003e\n\u003cli\u003eConfiguration and monitoring via built-in web interface\u003c\/li\u003e\n\u003cli\u003e92dB internal buzzer for alerts\u003c\/li\u003e\n\u003cli\u003eAbility to generate SMS alert messages when used with a Digital Yacht 4GX or 5GX product for remote alerts\u003c\/li\u003e\n\u003cli\u003eSelf-contained, bus powered, unobtrusive IP54 rated black box\u003c\/li\u003e\n\u003cli\u003eFuture proof design, with easy to update firmware via web interface to keep unit aligned with current threats\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWith more technically advanced, integrated and \"connected\" boats, security becomes a major concern. Recent high profile automotive hacks have highlighted security weaknesses in some CAN based systems.\u003c\/p\u003e\u003cp\u003eThe NMEA Organisation have responded to this threat by establishing a Cyber Security Working Group to identify and mitigate the risks of maritime attacks\u003c\/p\u003e\u003cp\u003eNET Protect is the World's first cyber security product, focused on NMEA 2000, to be developed as part of this NMEA initiative.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eWhat's in the Box:\u003c\/b\u003e\u003cul\u003e\n\u003cli\u003eNET Protect With Integrated 0.8m Nmea 2000 Drop Cable\u003c\/li\u003e\n\u003cli\u003eInstructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385358110882,"sku":"DIYZDIGN2KPROT","price":389.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGN2KPROT.jpg?v=1765306383"},{"product_id":"digital-yacht-gps160-trinav-gps-glonass-galileo-sensor-furuno-output","title":"Digital Yacht GPS160 TriNav GPS. Glonass, Galileo Sensor Furuno Output MPN - ZDIGGPS160F","description":"\u003cp\u003e\u003cb\u003eDigital Yacht GPS160F with Furuno Data Output\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e ZDIGGPS160F\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGPS160 for legacy Furuno systems\u003c\/li\u003e\n\u003cli\u003eRefined anti-spoofing algorithm for robust performance of position and interference rejection\u003c\/li\u003e\n\u003cli\u003eMany formats of NMEA data output including datum information -user can configure through internal DIP switches\u003c\/li\u003e\n\u003cli\u003eUltra low (\u0026lt;20mA) power consumption at 12V DC\u003c\/li\u003e\n\u003cli\u003e10m cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe GPS160 series of sensors is a high performance GPS designed for use with chart plotters\u003c\/p\u003e\u003cp\u003eDigital Yacht have introduced a specific version of the GPS160 which is a simple replacement for older Furuno plotter and GPS systems. Devices like the Furuno GP32, Navnet and GPS310\/320 utilise a specific format for GPS data and this new sensor emulates that for easy compatibility. Some of these older GPS sensors have suffered from technical issues with the GPS system roll over changes which can render chart plotter systems useless. The GPS160F provides an economical and reliable solution to these problems. Please note that it cannot be connected to a GP32 display, but it can replace the GP32, outputting the same data to other Furuno devices that the GP32 provided.\u003c\/p\u003e\u003cp\u003eIn conjunction with Furuno UK, Digital Yacht have developed a special version of their popular GPS160 Smart GNSS Sensor \"QuadNav\"that outputs the older NMEA 0183 sentences and data format that the legacy Furuno systems can read. Now if a Furuno customer has a problem with their existing Furuno GPS (GP310\/GP320\/GP32\/etc.) they can use the new GPS160F as a simple \"drop-in\" replacement for their failed positioning sensor.\u003c\/p\u003e\u003cp\u003eThe new GPS160F has been tested with a wide variety of legacy Furuno products including; the original NavNet MFDs, NavNet VX2,M1735 Radar, GP7000 and the FCV family of sounders.\u003c\/p\u003e\u003cp\u003eSupplied with a 10m cable and new user manual with dedicated Furuno interfacing information, the GPS160F will work straight out of the box and just requires a simple 4 wire connection to the existing Furuno system.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eWhat's in the Box:\u003c\/b\u003e\u003cul\u003e\n\u003cli\u003eGPS160 f\u003c\/li\u003e\n\u003cli\u003e10M Cable\u003c\/li\u003e\n\u003cli\u003emanual\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385358241954,"sku":"DIYZDIGGPS160F","price":329.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGGPS160F.jpg?v=1765306386"},{"product_id":"digital-yacht-ve-konvert-victron-ve-to-nmea2000-gateway","title":"Digital Yacht VE-KONVERT Victron VE to NMEA2000 Gateway MPN - ZDIGVEKVT","description":"\u003cp\u003e\u003cb\u003eDigital yacht Victron VE.Direct to NMEA 2000 Gateway\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGVEKVT\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eUniversal NMEA 2000 gateway for Victron products with a VE.Direct interface\u003c\/li\u003e\n\u003cli\u003eEnables battery management or solar charge monitoring on compatible Multi Function Displays (Raymarine, Garmin, Navico, Furuno etc)\u003c\/li\u003e\n\u003cli\u003eProvides battery voltage, charge\/discharge current, state of charge and time to depletion based on sophisticated algorithm\u003c\/li\u003e\n\u003cli\u003eEasy installation, plug 'n' play connectivity and self-powered from the NMEA 2000 bus\u003c\/li\u003e\n\u003cli\u003eGenerates NMEA 2000 Alerts, from any BMV or SmartShunt Alarms\u003c\/li\u003e\n\u003cli\u003eSupports multiple SmartShunts for larger multi battery systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eveKonvert is a new stand alone NMEA 2000 interface designed in conjunction with Victron Energy to integrate VE.Direct compatible devices such as their SmartShunt, BMV Battery Monitors and MPPT Solar Charge Controller range into NMEA 2000 systems.\u003c\/p\u003e\u003cp\u003eThis functionality already existed but required the use of a sophisticated Cerbo module. veKonvert is a lower cost, simpler solution for smaller installations that just need the electrical data displayed on a Multi Function Displays (MFD).\u003c\/p\u003e\u003cp\u003eNOTE - veKonvert is not compatible with Victron Chargers and Inverters. It should also not be plugged in to the VE.Direct interfaces of any Victron \"Consumers\" such as Multiplus, Quattro, Cerbo, etc.\u003c\/p\u003e\u003cp\u003eInstallation is simple - just \"T\" into the NMEA 2000 backbone and plug into the VE.Direct custom connector on the SmartShunt and you've battery and electrical data on your NMEA 2000 network!\u003c\/p\u003e\u003cp\u003eBoaters and boat builders like a clear and uncluttered dash or nav area so integrating electrical data into the main navigation display is a popular and cost saving option.\u003c\/p\u003e\u003cp\u003eThe product is a collaboration between Victron Energy and Digital Yacht. The system utilises Victron's proprietary VE.Direct data connectivity as a source for the NMEA 2000 data.\u003c\/p\u003e\u003cp\u003eVictron solar panel controllers (MPPTs) and battery monitors can now also interconnect to NMEA 2000 via the veKonvert interface.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eWhat's in the Box:\u003c\/b\u003e\u003cul\u003e\u003cli\u003eveKonvert\u003c\/li\u003e\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385358405794,"sku":"DIYZDIGVEKVT","price":259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGVEKVT.jpg?v=1765306389"},{"product_id":"digital-yacht-nmea-adapter-f-pc-39399","title":"Digital Yacht NMEA Adapter for PC MPN - ZDIGUSBNMEA","description":"\u003cb\u003eNMEA Adapter f\/PC\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe USB to NMEA Serial Adaptor cable is a simple and effective method for connecting NMEA 0183 compatible marine equipment to a PC. Each cable contains a small internal electronic circuit board, housed in the USB connector. This circuitry provides full bi-directional conversion of the serial data and also includes Tx and Rx LEDs which give a visual indication of data traffic on the cable.\u003cbr\u003e\u003cbr\u003e The other end of the cable is bare, tinned wire ended connections which can be quickly connected to the NMEA 0183 compatible equipment with suitable connector block or terminals. The cable is FCC, CE and RoHS compliant.\u003cbr\u003e \u003cbr\u003eThe USB side of the cable is USB powered and USB 2.0 full speed compatible. Each cable is 1.8m long and supports a data transfer rate up to 1 Mbaud. Drivers are available for WinXP, Vista, Win7, LINUX and Mac OS X.","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385650696354,"sku":"39399","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/39399XL.jpg?v=1765311052"},{"product_id":"digital-yacht-ais100-ais-receiver-40832","title":"Digital Yacht AIS100 AIS Receiver MPN - ZDIGAIS100","description":"\u003cb\u003eAIS100 Receiver\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThis value priced, entry level AIS receiver is Digital Yacht's most cost effective solution for adding AIS to your boat. Featuring the same dual channel receiver as the AIS200 range, but without the multiplexer, there is no compromise on performance and the AIS100 will outperform all other, inferior, single channel receivers.\u003cbr\u003e\u003cbr\u003eFor use with existing AIS compatible chart plotters,  such as the latest Garmin, Raymarine, Navico, Standard Horizon and Furuno units. Connected to an existing VHF antenna (via a splitter) or to a dedicated AIS antenna, you can receive all AIS targets within 20 miles of your boat.\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eLow cost entry level AIS receiver \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh performance dual-channel AIS receiver for use with existing plotter and radar systems \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh Speed NMEA output (38,400 baud) \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRequires VHF antenna or dedicated AIS antenna (available as optional accessory) \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEasy to install IP54 black box solution \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385670488226,"sku":"40832","price":349.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/40832XL.jpg?v=1765311343"},{"product_id":"digital-yacht-aisnet-ais-base-station-40833","title":"Digital Yacht AISnet AIS Base Station MPN - ZDIGAISNET","description":"\u003cb\u003eAISnet AIS Base Station\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eAISnet is a new AIS receiver for use as an AIS base station at home or in the office. Utilising the same high performance dual channel AIS receiver as the rest of the Digital Yacht range, AISnet also features an ethernet socket so that you can connect it to your broadband router and send AIS data to an on-line AIS tracking service.\u003cbr\u003e\u003cbr\u003eThere are now a large number of internet based web sites which offer a view of AIS equipped vessels on a background chart allowing users to check the position and identity of ships and yachts.  If your home\/office is close to the coast and you would like to contribute your data to one of these sites, simply register with the company and they will give you an IP address and Port number.\u003cbr\u003e\u003cbr\u003eUsing the setup program that Digital Yacht supply, it takes seconds to program the IP address and Port in to AISnet, which will immediately start sending your local AIS data seamlessly across the internet to be displayed on the site.\u003cbr\u003e\u003cbr\u003eIt is also possible to view the data, that AISnet is collecting, locally on your PC using the free SmarterTrack Lite software that Digital Yacht include with every AISnet. Simply plug the USB connector into your PC and the AIS data will appear on your PC and still be transmitted over the internet.\u003cbr\u003e\u003cbr\u003eAISnet is supplied with a universal UK\/Euro\/US mains adaptor that provides a regulated 12v supply from 240v\/110v AC mains.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eKEY FEATURES\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eAIS base station for Home of Office use \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntegrated ethernet network controller for supplying AIS data to online AIS websites \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh performance dual channel AIS receiver \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSimple configuration via free setup program \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUSB Interface for simple Plug and Play connection to a PC \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRequires VHF antenna or dedicated AIS antenna (available as optional accessory) or splitter \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUniversal Mains power supply included \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSimple \"fit and forget\" black box solution\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385670619298,"sku":"40833","price":1049.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/40833XL.jpg?v=1765311346"},{"product_id":"digital-yacht-ais100-usb-ais-receiver-41420","title":"Digital Yacht AIS100 USB AIS Receiver MPN - ZDIGAIS100USB","description":"\u003cb\u003eAIS100 Receiver (USB)\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThis value priced, entry level AIS receiver is Digital Yacht's most cost effective solution for adding AIS to your PC. Featuring the same dual channel receiver as the AIS200 Pro, but without the NMEA 0183 output and multiplexer, there is no compromise on performance and the AIS100 will out perform all other, inferior, single channel receivers.\u003cbr\u003e\u003cbr\u003eFor use with any AIS compatible PC navigation software,  such as the latest SmarterTrack, MaxSea, Nobeltec, SeaPro and RosePoint applications. Connected to an existing VHF antenna (via a splitter) or to a dedicated AIS antenna, you can receive all AIS targets within 20 miles of your boat.\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eLow cost entry level AIS receiver\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh performance dual-channel AIS receiver for use with AIS compatible PC navigation software\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUSB Interface for simple Plug and Play connection to a PC\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRequires VHF antenna or dedicated AIS antenna (available as optional accessory)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEasy to install IP54 black box solution\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385675600034,"sku":"41420","price":349.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/41420XL.jpg?v=1765311438"},{"product_id":"digital-yacht-ais100p-pro-ais-usb-receiver-43210","title":"Digital Yacht AIS100P Pro AIS USB Receiver MPN - ZDIGAIS100P","description":"\u003cb\u003eAIS100P Pro AIS USB Receiver\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eValue priced, high performance, dual channel black box AIS receiver with USB output.  Now includes NMEA0183 input multiplex function - combines NMEA 4800 baud data with Ais data and makes all data available on the USB output.  Supplied with Windows, Mac, and Linux driver disk.  Requires connection to 12\/24v supply and connection to suitable VHF antenna or splitter.","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385693851810,"sku":"43210","price":389.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/43210XL.jpg?v=1765311767"},{"product_id":"digital-yacht-spl2000-vhf-ais-powered-antenna-splitter-44698","title":"Digital Yacht SPL2000 VHF\/AIS Powered Antenna Splitter MPN - ZDIGSPL2000","description":"\u003cb\u003eSPL2000 AIS-VHF Antenna Splitter\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe SPL2000 allows the boat's VHF antenna to be used for both an AIS and VHF simultaneously.  It uses ZeroLoss technology and is suitable for use with AIS Class B transponder systems as well as AIS receivers.  It's also designed as a failsafe device with automatic priority given to the connected VHF.  It is supplied with a BNC-BNC patch cable for the AIS and a PL259-PL259 cable for the VHF.  It also features a AM\/FM wired output for an on board stereo receiver.  Identical in size to the AIT2000, it makes the perfect complimentary splitter device for Digital Yacht's range of AIS products.","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385712398498,"sku":"44698","price":459.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/44698XL.jpg?v=1765312043"},{"product_id":"digital-yacht-gv30-vhf-ais-gps-combo-antenna-50959","title":"Digital Yacht GV30 VHF\/AIS\/GPS Combo Antenna MPN - ZDIGGV30","description":"\u003cp\u003e\u003cstrong\u003eGV30 Combo GPS \u0026amp; AIS Antenna\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA Class B AIS transponder requires a dedicated GPS antenna (all Class B units must have their own internal GPS and can't use an external feed for regulatory purposes) as well as a VHF antenna or suitable VHF-AIS antenna splitter. The GV30 is a combination VHF\/AIS and GPS antenna with twin coax feeds (10m). It is fitted with a standard 1\" threaded base so will mount onto a variety of deck, pole and rail attachments available from many 3rd party suppliers.\u003c\/p\u003e\u003cp\u003eThe 10m coax cables are terminated with a FME mini connectors which makes running the cable easy, as the connector is barely larger than the 5mm cable. We then supply suitable adaptors for the TNC and BNC connectors on our AIT2000.\u003c\/p\u003e\u003cp\u003eThe GV30 is just 190mm high and 75mm in diameter. Despite its compact dimensions, it offers very good performance as it is specifically tuned to 162MHz (AIS frequency). The GV30 is also available with the AIT2000 as a bundle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCombination AIS\/VHF and GPS antenna\u003c\/li\u003e\n\u003cli\u003eSpecifically tuned to 162MHz\u003c\/li\u003e\n\u003cli\u003eHigh gain GPS element\u003c\/li\u003e\n\u003cli\u003eSupplied with 2 x 10m cable tails fitted with mini connectors for easy cable installation\u003c\/li\u003e\n\u003cli\u003eStandard 1\" threaded base for compatibility with a variety of 3rd party mounts\u003c\/li\u003e\n\u003cli\u003eSupplied with TNC (GPS) and BNC (AIS) adaptors\u003c\/li\u003e\n\u003cli\u003eUnder 200mm high for low profile installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385836949666,"sku":"50959","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/50959XL.jpg?v=1765314101"},{"product_id":"digital-yacht-nmea-2000-starter-cable-kit-67952","title":"Digital Yacht NMEA 2000 Starter Cable Kit MPN - ZDIGN2KIT","description":"\u003cp\u003e\u003cstrong\u003eNMEA 2000 Starter Cable Kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNearly every new marine electronics product has an NMEA2000 interface now, but it is still “black magic” to many boat owners and even fairly technical users struggle to understand NMEA2000 and what is needed to make products work correctly together.\u003cbr\u003e\u003cbr\u003eWith Digtial Yacht's large range of AIS, often the first add-on device to make a boat owner think about NMEA2000, we are regularly asked “what do I need to make it work?” This prompted Digital Yacht to create a cost effective and smart NMEA2000 Starter Kit that is ideal for smaller boats but can also be easily expanded in the future.\u003cbr\u003e\u003cbr\u003eThere are other starter kits on the market, but none offer three device connection, metal connectors and a smart 4-Way T-Piece at such a good price.\u003cbr\u003e\u003cbr\u003eBy utilizing the NMEA2000 standard “Micro C” type connectors, users can easily add and expand to this Starter Kit as their installation grows or simply buy two or more kits for a larger install, still cheaper than buying the parts separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEverything you need in one box\u003c\/li\u003e\n\u003cli\u003eSmart 4-Way T-Piece “Backbone”\u003c\/li\u003e\n\u003cli\u003e1M (3') Power Cable with in-line fuse\u003c\/li\u003e\n\u003cli\u003e1M (3') “Drop Cable”\u003c\/li\u003e\n\u003cli\u003ePair of removable network terminators\u003c\/li\u003e\n\u003cli\u003eAllows three devices to be connected\u003c\/li\u003e\n\u003cli\u003eStandard “Micro C” connectors make it very easy for future network expansion\u003c\/li\u003e\n\u003cli\u003eMetal connectors and reduced T-Piece connections, improve reliability\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46386303828130,"sku":"67952","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/67952XL.jpg?v=1765321419"},{"product_id":"digital-yacht-seatalk1-to-nmea-interface-70363","title":"Digital Yacht SeaTalk1 to NMEA Interface MPN - ZDIGSTN","description":"\u003cp\u003e\u003cstrong\u003eSeaTalk1 to NMEA Interface\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDigital Yacht's SeaTalk to NMEA (ISO) Converter is a small, but powerful interface that provides bi-directional conversion between a SeaTalk network and an NMEA 0183 network or device. Taking its power from the SeaTalk network, the ST-NMEA Converter features a full, multi-transistor SeaTalk 1 interface, an opto-isolated NMEA 0183 input and differential NMEA 0183 output that allows key navigational data to be reliably shared between the SeaTalk and NMEA0183 networks.\u003c\/p\u003e\u003cp\u003eFor developers and advanced users that want to access the raw SeaTalk data, the ST-NMEA converter can also be configured to work in a special “raw data\" mode ($STALK) which is gaining support in some Open Source projects.\u003c\/p\u003e\u003cp\u003eThe ST-NMEA (ISO) Converter is ideal for connection to one of Digital Yacht's wireless NMEA servers, allowing SeaTalk owners to go wireless and aUSB Version of the ST-NMEA Converteris also available for direct connection to a PC, Mac or even a Raspberry Pie embedded Linux system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConverts SeaTalk1 to NMEA data\u003c\/li\u003e\n\u003cli\u003ePowerful bi-directional converter –also converts NMEA to SeaTalk for use with 3rdparty transducers and sensors\u003c\/li\u003e\n\u003cli\u003ePowered from the SeaTalk network –easy red, black and yellow wire colour coding\u003c\/li\u003e\n\u003cli\u003eFeatures reliable multi-stage transistor SeaTalk interface\u003c\/li\u003e\n\u003cli\u003eOpto-isolated NMEA0183 input and differential NMEA0183 output\u003c\/li\u003e\n\u003cli\u003eConverts all of the key navigational data\u003c\/li\u003e\n\u003cli\u003eUSB version (for PC \u0026amp; MAC) also available\u003c\/li\u003e\n\u003cli\u003eUSB variant can also be configured to operate in “Raw Data” mode ($STALK)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNMEA Version - Typical Connections:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConnects direct to SeaTalk1 cabling using familiar red, black and yellow wiring\u003c\/li\u003e\n\u003cli\u003eAdd the WLN10HS for wifiintegration to iPads and tablets\u003c\/li\u003e\n\u003cli\u003eAdd the WLN20 (dual input NMEA to WiFi server) for AIS and SeaTalk to wifi systems\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46386363793570,"sku":"70363","price":259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/70363XL.jpg?v=1765322495"},{"product_id":"digital-yacht-wln10-smart-nmea-to-wifi-converter-4800-baud-75756","title":"Digital Yacht WLN10 Smart NMEA to WiFi Converter - 4800 Baud MPN - ZDIGWLN10SM","description":"\u003cp\u003e\u003cstrong\u003eWLN10 Smart NMEA to WiFi Converter - 4800 Baud\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDigital Yacht’s WLN10 Smart NMEA to WiFi gateway takes iPad and tablet integration afloat even further with the ability to connect to existing on board GPS, AIS and instrument systems and transfer data wirelessly to an iPad or tablet – allowing compatible apps to display and compute with real time information. The WLN10 creates a secure, password protected wifi network on board to footprint the boat with data.\u003c\/p\u003e\u003cp\u003eWhen connected to, for example, an AIS system, real time AIS target positions and identity data will be displayed on detailed electronic charting through compatible apps including NavLink, TimeZero, iAIS, iSailor, Seapilot and hundreds more. The tablet becomes a full function navigation display.\u003c\/p\u003e\u003cp\u003eThis version of the WLN10 can now be programmed through its simple browser interface for NMEA 0183 data at 4800 or 38400 baud and for initial programming: Just logon to the IP address and you can set baud rate, SSID and password.  No complicated programming! Through the web interface, you can also view NMEA data received for easy fault finding of issues.\u003c\/p\u003e\u003cp\u003eThe WLN10 Smart supports both UDP (for multiple connections) and TCP\/IP interfaces for maximum compatibility with apps so you can be using a PC at the chart table with an iPad on deck. It’s also bidirectional so apps can control an autopilot if this function is enabled.\u003c\/p\u003e\u003cp\u003eThe Smart WLN10 has one NMEA0183 input which can be configured through the web interface. You can also utilise our SeaTalk to NMEA adaptor to allow SeaTalk instrument data to be interfaced directly to the WLN10 Smart.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNMEA 0183 to WiFi server (4800 baud or 38400 baud)\u003c\/li\u003e\n\u003cli\u003eWeb interface for setup and initial programming\u003c\/li\u003e\n\u003cli\u003eSet baud rate, SSID and password through web interface\u003c\/li\u003e\n\u003cli\u003eSupports both UDP (for multiple connections) and TCP\/IP interfaces\u003c\/li\u003e\n\u003cli\u003eView NMEA data received for easy fault finding of issues.\u003c\/li\u003e\n\u003cli\u003eSupports a bi directional Wi-Fi interface\u003c\/li\u003e\n\u003cli\u003eFully compatible with popular navigation apps and software\u003c\/li\u003e\n\u003cli\u003eEasy to install IPX4 black box solution\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46386519179426,"sku":"75756","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/75756XL.jpg?v=1765325191"},{"product_id":"digital-yacht-navlink-2-nmea-2000-to-wifi-gateway-76401","title":"Digital Yacht NavLink 2 NMEA 2000 to WiFi Gateway MPN - ZDIGNLINK","description":"\u003cp\u003e\u003cstrong\u003eNavLink 2 \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e“NavLink 2 is an easy to fit NMEA 2000 to Wifi server designed to make NMEA 2000 navigation data available for apps on smartphones, tablets, iPads and PCs.” \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNavLink 2 is an easy to fit NMEA 2000 to Wifi server designed so that NMEA 2000 navigation data can be made available for apps on smartphones, tablets, iPads and PCs. Installation takes seconds as a result of direction connection to the NMEA 2000 back bone and self-powered from the data network.\u003c\/p\u003e\u003cp\u003eOnce installed, it creates a local WiFi network for devices to connect or can be programmed to join an existing wireless network if one is already installed.  This is ideal for devices like the Furuno wireless radar which require operation through their own dedicated network but require NMEA 2000 data integration for charting apps.\u003c\/p\u003e\u003cp\u003eNavLink 2 now works with the popular Navionics Boating App for Apple iOS and Android. Therefore allowing display of GPS and AIS data on your Navionics charts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNMEA 2000 to WiFi server\u003c\/li\u003e\n\u003cli\u003eSelf powered from NMEA 2000 bus – fits in seconds\u003c\/li\u003e\n\u003cli\u003eSupports TCP\/IP and UDP connection modes\u003c\/li\u003e\n\u003cli\u003eProvides AIS, navigation and instrument data to apps\u003c\/li\u003e\n\u003cli\u003eCompatible with all popular apps like iNavX, TimeZero, Weather 4D, Navionics, SailGrib, NavLink, iSailor, SeaPilot, AquaMap etc\u003c\/li\u003e\n\u003cli\u003eUp to 7 connected devices\u003c\/li\u003e\n\u003cli\u003eCompatible with Windows, Linux, MAC OS, iOS and Android\u003c\/li\u003e\n\u003cli\u003eEasy web interface for programming\u003c\/li\u003e\n\u003cli\u003ePassword protected\u003c\/li\u003e\n\u003cli\u003eCan act as dedicated wireless server or rather can connect to an existing wireless network\u003c\/li\u003e\n\u003cli\u003eDiagnostic data display mode and LED status lights\u003c\/li\u003e\n\u003cli\u003eInternal hi gain WiFi antenna\u003c\/li\u003e\n\u003cli\u003eSuper-fast 230KBs operation\u003c\/li\u003e\n\u003cli\u003eOptional raw data mode for developers and likewise advanced users\u003c\/li\u003e\n\u003cli\u003eSupplied with NMEA 2000 cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46386537562274,"sku":"76401","price":309.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/76401XL.jpg?v=1765325544"},{"product_id":"digital-yacht-ikonvert-nmea-2000-gateway-w-iso-interface-79011","title":"Digital Yacht iKonvert NMEA 2000 Gateway with ISO Interface MPN - ZDIGIKVT","description":"\u003cp\u003e\u003cstrong\u003eiKonvert NMEA 2000 Gateway with ISO Interface\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe iKonvert NMEA2000-0183 Gateway\/Converter is an intelligent and flexible gateway for allowing new NMEA2000 equipment to talk to legacy NMEA0183 equipment. Conversions are bi-directional, so whether you want to get the data from older NMEA0183 sensors on to your NMEA2000 network or you have added a new NMEA2000 only MFD and want it to send GPS and Navigation data to your older NMEA0183 VHF and Autopilot, iKonvert will  accurately and intelligently carry out the required data conversions.\u003c\/p\u003e\u003cp\u003eThere are many, many real life applications for NMEA2000 to NMEA0183, with a plethora of different makes and models of equipment that may need to be connected together. We have designed iKonvert to satisfy as many of these situations as possible by incorporating a simple but effective mode selection method, via a set of DIP switches inside iKonvert. Just remove two screws, open the iKonvert box and using a small screw driver, select the mode you need. The next time iKonvert powers up, it will automatically carry out the conversions you selected.\u003c\/p\u003e\u003cp\u003eA number of modes have already been defined including; Heading, Sounder, AIS, GPS, Wind, Instruments and an all data gateway mode, which automatically sets the conversions to be done and the baud rate iKonvert will use. What is more, if you need a mode that we have not defined yet, just let us know and we will consider including it.\u003c\/p\u003e\u003cp\u003eDigital Yacht’s iKonvert Gateway is housed in a compact and easy to mount housing, with an integral NMEA0183 cable and standard NMEA2000 Micro drop cable (male).  Taking its power from the NMEA2000 network, and providing full galvanic isolation between the NMEA0183 and NMEA2000 networks, iKonvert is the perfect solution for all NMEA conversions.\u003c\/p\u003e\u003cp\u003eFor customers that want to take this converted data in to a computer, please consider the iKonvert USB gateway, that features an integral USB cable that is compatible with all of the popular operating systems (Windows\/Mac\/LINUX\/Android).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmall but powerful bi-directional NMEA2000 to NMEA0183 Converter\u003c\/li\u003e\n\u003cli\u003ePowered from the NMEA2000 network\u003c\/li\u003e\n\u003cli\u003eOpto Isolated NMEA0183 Interface\u003c\/li\u003e\n\u003cli\u003eConverts AIS, GPS, Navigation, Instrument and XDR data\u003c\/li\u003e\n\u003cli\u003eFeatures “Real Life” data modes for most common installations\u003c\/li\u003e\n\u003cli\u003eSimple configuration of data modes using DIP switches\u003c\/li\u003e\n\u003cli\u003eIntegral NMEA0183 cable and NMEA2000 Micro (Male) cables\u003c\/li\u003e\n\u003cli\u003eFull galvanic isolation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46386639274146,"sku":"79011","price":259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/79011XL.jpg?v=1765327008"},{"product_id":"digital-yacht-ikonvert-w-usb-interface-79012","title":"Digital Yacht iKonvert with USB Interface MPN - ZDIGIKVTUSB","description":"\u003cp\u003e\u003cstrong\u003eiKonvert with USB Interface\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe iKonvert NMEA2000-0183 Gateway\/Converter is an intelligent and flexible gateway for allowing software applications to read\/write NMEA2000 data, either as RAW binary PGN data for ultimate analysis and control or converted to the older and more commonly supported NMEA0183 data.\u003c\/p\u003e\u003cp\u003eEvery popular Marine Navigation application that runs on PC\/MAC\/LINUX computers, can read NMEA0183 data and for all of those programs, iKonvert provides a simple, reliable and cost effective way to access the navigation data on an NMEA2000 network. Simply set the DIP switches inside iKonvert to the required data mode that you want to use and iKonvert will extract the selected data from the NMEA2000 network and provide them to your marine application in a format and at a baud rate they support.\u003c\/p\u003e\u003cp\u003eFor developers creating new applications or who know how to decode NMEA2000 PGNs, iKonvert can be easily set to its “RAW Mode” where data can be read\/written to using a simple serial data format that we publish on our iKonvert Github site. No special libraries or proprietary code are required to integrate iKonvert, which has attracted the interest of a number of developers and it is already compatible with CanBoat and the popular Signal K Node Server.\u003c\/p\u003e\u003cp\u003eDigital Yacht’s iKonvert Gateway is housed in a compact and easy to mount housing, with an integral USB cable and standard NMEA2000 Micro drop cable (male).  Taking its power from the NMEA2000 network, and providing full galvanic isolation between the USB interface and NMEA2000 network, iKonvert operates at a baud rate of 230KB in “RAW mode” and 4.8KB, 38.4KB or 115KB in NMEA0183 conversion modes. All modes can be simply selected using the internal DIP switches with no special configuration software or firmware changes required.\u003c\/p\u003e\u003cp\u003eiKonvert’s USB interface features an FTDI chip that has the most reliable and compatible USB drivers for all of the popular operating systems (Windows\/Mac\/LINUX\/Android), whilst an ISO Version of iKonvert will soon be released for direct connection between NMEA2000 and NMEA0183 systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmall but powerful bi-directional NMEA2000 Gateway\/Converter\u003c\/li\u003e\n\u003cli\u003ePowered from the NMEA2000 network\u003c\/li\u003e\n\u003cli\u003eHigh Speed USB 2.0 USB Interface (FTDI)\u003c\/li\u003e\n\u003cli\u003eCompatible with Windows, OSX, LINUX and Android\u003c\/li\u003e\n\u003cli\u003eCan be configured to operate in “Raw Mode” (Binary PGN data)\u003c\/li\u003e\n\u003cli\u003eConverts all of the key navigational data\u003c\/li\u003e\n\u003cli\u003eIntegral USB (Type A) and NMEA2000 Micro (Male) cables\u003c\/li\u003e\n\u003cli\u003eSimple configuration of data modes using DIP switches\u003c\/li\u003e\n\u003cli\u003eFull galvanic isolation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46386639437986,"sku":"79012","price":259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/79012XL.jpg?v=1765327010"},{"product_id":"digital-yacht-aisnode-nmea-2000-boat-ais-class-b-receiver-79427","title":"Digital Yacht AISnode NMEA 2000 Boat AIS Class B Receiver MPN - ZDIGAISNODE","description":"\u003cp\u003e\u003cstrong\u003eAISnode NMEA 2000 Boat AIS Class B Receiver\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAISnode is the first AIS Receiver to be designed exclusively for NMEA 2000. With a single, integral 0.75m NMEA 2000 cable that takes power from the network and outputs the AIS data on to the network, the AISnode is incredibly easy to install. Just find or fit a spare NMEA 2000 \"T Piece\", screw the AISnode cable to the connection, connect a VHF antenna and the installation is complete. \u003c\/p\u003e\u003cp\u003eUtilizing the same high performance, true dual channel receiver that our latest Class B Transponders have, AISnode will receive every AIS equipped vessel within VHF range and never miss or drop a single target. All of the latest NMEA 2000 AIS message types are supported, including AIS SARTs, AtoNs and Class B static data, ensuring full compatibility with all of the latest AIS enabled chart plotters. \u003c\/p\u003e\u003cp\u003eNMEA 2000 is becoming more and more popular on new boats and nearly all new chart plotters have an NMEA 2000 interface, with one or two models only providing an NMEA 2000 interface. With its reliability, easy plug and play connectivity and industry standard compatibility, it is not surprising why NMEA 2000 is gradually replacing the older NMEA0183 standard.\u003c\/p\u003e\u003cp\u003eThe AIT2000 and AIT3000 Class B Transponders already provide NMEA 2000 connectivity but not all customers want the extra expense of purchasing and installing a transponder and for small chart plotters an AIS receiver is still a popular choice.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication Domain: For Boats\u003c\/li\u003e\n\u003cli\u003eType: Class B Receiver\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46386656641186,"sku":"79427","price":719.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/79427XL.jpg?v=1765327229"},{"product_id":"digital-yacht-gps160-trinav-sensor-w-nmea-0183-output-79870","title":"Digital Yacht GPS160 TriNav Sensor with NMEA 0183 Output MPN - ZDIGGPS160","description":"\u003cp\u003e\u003cstrong\u003eGPS160 TriNav Sensor with NMEA 0183 Output\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe GPS160, a high performance positioning sensor using GPS, Galileo and Glonass satellite systems for exceptional positioning accuracies and redundancies.\u003c\/p\u003e\u003cp\u003eTriNav technology allows all three systems to be simultaneously utilized for navigation. The device can also be field programmed for a variety of modes such as single GNSS operation (eg Galileo only) as well as output configurations such as update rate, NMEA sentence structure etc\u003c\/p\u003e\u003cp\u003eThe GPS160 is available with a NMEA 0183 output (4800, 38400 and 115200 baud programmable) and a USB variant for PC, MAC and Linux. For NMEA 2000 systems, a bundle is available with iKonvert allowing easy and flexible NMEA 2000 installation without the need for cumbersome drop cables.\u003c\/p\u003e\u003cp\u003eThe GPS160 also support an external MOB switch or device. When activated, it creates a “synthesized” AIS SART MOB message on the NMEA output which can be interfaced with a local plotter for MOB identification.\u003c\/p\u003e\u003cp\u003eThe GPS160 supports GPS, Glonass and Galileo positioning. Our TriNav technology is used to combine signals from all three systems to compute the best possible fix accuracy and reliability.\u003c\/p\u003e\u003cp\u003eGalileo is the global navigation satellite system (GNSS) that has been developed over the past two decades. It joins the GPS and GLONASS systems and offers mariners a 3rd reliable positioning source. It is planned to be fully operational in 2020.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e72 channel GPS, Glonassand Galileo GNSS positioning receiver\u003c\/li\u003e\n\u003cli\u003eTypically sub 1m accuracy thanks to TriNav technology –combines all satellite data for optimum accuracy\u003c\/li\u003e\n\u003cli\u003eCan be configured as dedicated GPS, Glonass or Galileo only device\u003c\/li\u003e\n\u003cli\u003eSophisticated anti-spoofing algorithm for robust positioning performance and interference rejection\u003c\/li\u003e\n\u003cli\u003eAvailable in NMEA 0183, NMEA 2000 (with iKonvert interface)and wireless (with WLN10SM) variants\u003c\/li\u003e\n\u003cli\u003eGPS160USB also available with USB connection for PC\/MAC\u003c\/li\u003e\n\u003cli\u003eUser\/field selectable 4800, 38400 and 115200 baud operation through simple internal DIP switches\u003c\/li\u003e\n\u003cli\u003eMultiple formats of NMEA data output including datum information –user configurable through internal DIP switches\u003c\/li\u003e\n\u003cli\u003eUp to 18Hz update rate (user selectable)\u003c\/li\u003e\n\u003cli\u003eUltra low (\u0026lt;20mA) power consumption at 12V DC\u003c\/li\u003e\n\u003cli\u003eInput for MOB switch\/system –when activated generates synthetic AIS MOB NMEA output to activate MOB position on plotter\u003c\/li\u003e\n\u003cli\u003eProfessional system (ECDIS) support with datum sentence structure (DTM\/GBS\/GNS\/GRS\/GSA\/GST)\u003c\/li\u003e\n\u003cli\u003ePuck installation or fits 3rd party industry standard 1” x 14 TPI threaded mount\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46386671091874,"sku":"79870","price":209.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/79870XL.jpg?v=1765327421"},{"product_id":"digital-yacht-gps160-trinav-sensor-w-usb-output-79871","title":"Digital Yacht GPS160 TriNav Sensor with USB Output MPN - ZDIGGPS160USB","description":"\u003cp\u003e\u003cstrong\u003eGPS160 TriNav Sensor with USB Output\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe GPS160, a high performance positioning sensor using GPS, Galileo and Glonass satellite systems for exceptional positioning accuracies and redundancies.\u003c\/p\u003e\u003cp\u003eTriNav technology allows all three systems to be simultaneously utilized for navigation. The device can also be field programmed for a variety of modes such as single GNSS operation (eg Galileo only) as well as output configurations such as update rate, NMEA sentence structure etc\u003c\/p\u003e\u003cp\u003eThe GPS160 is available with a NMEA 0183 output (4800, 38400 and 115200 baud programmable) and a USB variant for PC, MAC and Linux. For NMEA 2000 systems, a bundle is available with iKonvert allowing easy and flexible NMEA 2000 installation without the need for cumbersome drop cables.\u003c\/p\u003e\u003cp\u003eThe GPS160 also support an external MOB switch or device. When activated, it creates a “synthesized” AIS SART MOB message on the NMEA output which can be interfaced with a local plotter for MOB identification.\u003c\/p\u003e\u003cp\u003eThe GPS160 supports GPS, Glonass and Galileo positioning. Our TriNav technology is used to combine signals from all three systems to compute the best possible fix accuracy and reliability.\u003c\/p\u003e\u003cp\u003eGalileo is the global navigation satellite system (GNSS) that has been developed over the past two decades. It joins the GPS and GLONASS systems and offers mariners a 3rd reliable positioning source. It is planned to be fully operational in 2020.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e72 channel GPS, Glonassand Galileo GNSS positioning receiver\u003c\/li\u003e\n\u003cli\u003eTypically sub 1m accuracy thanks to TriNav technology –combines all satellite data for optimum accuracy\u003c\/li\u003e\n\u003cli\u003eCan be configured as dedicated GPS, Glonass or Galileo only device\u003c\/li\u003e\n\u003cli\u003eSophisticated anti-spoofing algorithm for robust positioning performance and interference rejection\u003c\/li\u003e\n\u003cli\u003eAvailable in NMEA 0183, NMEA 2000 (with iKonvert interface)and wireless (with WLN10SM) variants\u003c\/li\u003e\n\u003cli\u003eGPS160USB also available with USB connection for PC\/MAC\u003c\/li\u003e\n\u003cli\u003eUser\/field selectable 4800, 38400 and 115200 baud operation through simple internal DIP switches\u003c\/li\u003e\n\u003cli\u003eMultiple formats of NMEA data output including datum information –user configurable through internal DIP switches\u003c\/li\u003e\n\u003cli\u003eUp to 18Hz update rate (user selectable)\u003c\/li\u003e\n\u003cli\u003eUltra low (\u0026lt;20mA) power consumption at 12V DC\u003c\/li\u003e\n\u003cli\u003eInput for MOB switch\/system –when activated generates synthetic AIS MOB NMEA output to activate MOB position on plotter\u003c\/li\u003e\n\u003cli\u003eProfessional system (ECDIS) support with datum sentence structure (DTM\/GBS\/GNS\/GRS\/GSA\/GST)\u003c\/li\u003e\n\u003cli\u003ePuck installation or fits 3rd party industry standard 1” x 14 TPI threaded mount\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46386671190178,"sku":"79871","price":289.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/79871XL.jpg?v=1765327424"},{"product_id":"digital-yacht-gps160-trinav-sensor-w-ikonvert-nmea-2000-interface-bundle-79872","title":"Digital Yacht GPS160 TriNav Sensor with iKonvert NMEA 2000 Interface Bundle MPN - ZDIGGPS160N2K","description":"\u003cp\u003e\u003cstrong\u003eGPS160 TriNav Sensor w\/iKonvert NMEA 2000 Interface Bundle\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe GPS160, a high performance positioning sensor using GPS, Galileo and Glonass satellite systems for exceptional positioning accuracies and redundancies.\u003c\/p\u003e\u003cp\u003eTriNav technology allows all three systems to be simultaneously utilized for navigation. The device can also be field programmed for a variety of modes such as single GNSS operation (eg Galileo only) as well as output configurations such as update rate, NMEA sentence structure etc\u003c\/p\u003e\u003cp\u003eThe GPS160 is available with a NMEA 0183 output (4800, 38400 and 115200 baud programmable) and a USB variant for PC, MAC and Linux. For NMEA 2000 systems, a bundle is available with iKonvert allowing easy and flexible NMEA 2000 installation without the need for cumbersome drop cables.\u003c\/p\u003e\u003cp\u003eThe GPS160 also support an external MOB switch or device. When activated, it creates a “synthesized” AIS SART MOB message on the NMEA output which can be interfaced with a local plotter for MOB identification.\u003c\/p\u003e\u003cp\u003eThe GPS160 supports GPS, Glonass and Galileo positioning. Our TriNav technology is used to combine signals from all three systems to compute the best possible fix accuracy and reliability.\u003c\/p\u003e\u003cp\u003eGalileo is the global navigation satellite system (GNSS) that has been developed over the past two decades. It joins the GPS and GLONASS systems and offers mariners a 3rd reliable positioning source. It is planned to be fully operational in 2020.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e72 channel GPS, Glonass and Galileo GNSS positioning receiver\u003c\/li\u003e\n\u003cli\u003eTypically sub 1m accuracy thanks to TriNav technology –combines all satellite data for optimum accuracy\u003c\/li\u003e\n\u003cli\u003eCan be configured as dedicated GPS, Glonass or Galileo only device\u003c\/li\u003e\n\u003cli\u003eSophisticated anti-spoofing algorithm for robust positioning performance and interference rejection\u003c\/li\u003e\n\u003cli\u003eAvailable in NMEA 0183, NMEA 2000 (with iKonvert interface)and wireless (with WLN10SM) variants\u003c\/li\u003e\n\u003cli\u003eGPS160USB also available with USB connection for PC\/MAC\u003c\/li\u003e\n\u003cli\u003eUser\/field selectable 4800, 38400 and 115200 baud operation through simple internal DIP switches\u003c\/li\u003e\n\u003cli\u003eMultiple formats of NMEA data output including datum information –user configurable through internal DIP switches\u003c\/li\u003e\n\u003cli\u003eUp to 18Hz update rate (user selectable)\u003c\/li\u003e\n\u003cli\u003eUltra low (\u0026lt;20mA) power consumption at 12V DC\u003c\/li\u003e\n\u003cli\u003eInput for MOB switch\/system – when activated generates synthetic AIS MOB NMEA output to activate MOB position on plotter\u003c\/li\u003e\n\u003cli\u003eProfessional system (ECDIS) support with datum sentence structure (DTM\/GBS\/GNS\/GRS\/GSA\/GST)\u003c\/li\u003e\n\u003cli\u003ePuck installation or fits 3rd party industry standard 1” x 14 TPI threaded mount\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46386671222946,"sku":"79872","price":399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/79872XL.jpg?v=1765327424"},{"product_id":"digital-yacht-gps160-trinav-sensor-w-seatalk-interface-bundle-79873","title":"Digital Yacht GPS160 TriNav Sensor with SeaTalk Interface Bundle MPN - ZDIGGPS160ST","description":"\u003cp\u003e\u003cstrong\u003eGPS160 TriNav Sensor with SeaTalk Interface Bundle\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe GPS160, a high performance positioning sensor using GPS, Galileo and Glonass satellite systems for exceptional positioning accuracies and redundancies.\u003c\/p\u003e\u003cp\u003eTriNav technology allows all three systems to be simultaneously utilized for navigation. The device can also be field programmed for a variety of modes such as single GNSS operation (eg Galileo only) as well as output configurations such as update rate, NMEA sentence structure etc\u003c\/p\u003e\u003cp\u003eThe GPS160 is available with a NMEA 0183 output (4800, 38400 and 115200 baud programmable) and a USB variant for PC, MAC and Linux. For NMEA 2000 systems, a bundle is available with iKonvert allowing easy and flexible NMEA 2000 installation without the need for cumbersome drop cables.\u003c\/p\u003e\u003cp\u003eThe GPS160 also support an external MOB switch or device. When activated, it creates a “synthesized” AIS SART MOB message on the NMEA output which can be interfaced with a local plotter for MOB identification.\u003c\/p\u003e\u003cp\u003eThe GPS160 supports GPS, Glonass and Galileo positioning. Our TriNav technology is used to combine signals from all three systems to compute the best possible fix accuracy and reliability.\u003c\/p\u003e\u003cp\u003eGalileo is the global navigation satellite system (GNSS) that has been developed over the past two decades. It joins the GPS and GLONASS systems and offers mariners a 3rd reliable positioning source. It is planned to be fully operational in 2020.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e72 channel GPS, Glonass and Galileo GNSS positioning receiver\u003c\/li\u003e\n\u003cli\u003eTypically sub 1m accuracy thanks to TriNav technology –combines all satellite data for optimum accuracy\u003c\/li\u003e\n\u003cli\u003eCan be configured as dedicated GPS, Glonass or Galileo only device\u003c\/li\u003e\n\u003cli\u003eSophisticated anti-spoofing algorithm for robust positioning performance and interference rejection\u003c\/li\u003e\n\u003cli\u003eAvailable in NMEA 0183, NMEA 2000 (with iKonvert interface)and wireless (with WLN10SM) variants\u003c\/li\u003e\n\u003cli\u003eGPS160USB also available with USB connection for PC\/MAC\u003c\/li\u003e\n\u003cli\u003eUser\/field selectable 4800, 38400 and 115200 baud operation through simple internal DIP switches\u003c\/li\u003e\n\u003cli\u003eMultiple formats of NMEA data output including datum information –user configurable through internal DIP switches\u003c\/li\u003e\n\u003cli\u003eUp to 18Hz update rate (user selectable)\u003c\/li\u003e\n\u003cli\u003eUltra low (\u0026lt;20mA) power consumption at 12V DC\u003c\/li\u003e\n\u003cli\u003eInput for MOB switch\/system –when activated generates synthetic AIS MOB NMEA output to activate MOB position on plotter\u003c\/li\u003e\n\u003cli\u003eProfessional system (ECDIS) support with datum sentence structure (DTM\/GBS\/GNS\/GRS\/GSA\/GST)\u003c\/li\u003e\n\u003cli\u003ePuck installation or fits 3rd party industry standard 1” x 14TPI threaded mount\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46386671681698,"sku":"79873","price":399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/79873XL.jpg?v=1765327427"},{"product_id":"digital-yacht-wln30-smart-wireless-nmea-multiplexer-83678","title":"Digital Yacht WLN30 Smart Wireless NMEA Multiplexer MPN - ZDIGWLN30SM","description":"\u003cp\u003e\u003cstrong\u003eWLN30 Smart Wireless NMEA Multiplexer\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e“The WLN30 is a smart NMEA to WiFi Multiplexer designed to connect your smart phone and other wireless devices to your boat’s navigation systems. It features three NMEA0183 inputs and easy web interface configuration.” \u003c\/p\u003e\u003cp\u003eDigital Yacht’s WLN30 Smart Wireless NMEA Mutiplexer takes iPad and tablet integration afloat even further with the ability to connect to existing on board GPS, AIS and instrument systems and transfer data wirelessly to an iPad or tablet – allowing compatible apps to display and compute with real time information. The WLN30 creates a secure, password protected wifi network on board to footprint the boat with data.\u003c\/p\u003e\u003cp\u003eWhen connected to, for example, an AIS system, real time AIS target positions and identity data will be displayed on detailed electronic charting through compatible apps including Weather4D, TimeZero, iAIS, iSailor, SailGrib, Seapilot and hundreds more. The tablet becomes a full function navigation display.\u003c\/p\u003e\u003cp\u003eThe WLN30 has three NMEA0183 Inputs and one NMEA0183 Output, which can be programmed through its simple browser interface to operate at 4800 or 38400 baud rates. Data received on the three inputs is multiplexed together and transmitted to any wireless devices connected to the WLN30’s wireless network. The same multiplexed data is also available on the NMEA 0183 Output or in an alternative mode the NMEA 0183 Output can be configured to forward data from the wireless application, such as next waypoint or autopilot data, to other NMEA 0183 equipment.\u003c\/p\u003e\u003cp\u003eAll configuration of the WLN30 can be done through its own simple web interface, just open your web browser, enter the WLN30’s IP address and you can set baud rates, multiplexing mode, network name, password and select AP mode.  No complicated programming software or app required and you can even view the received NMEA data in the web browser, for easy fault finding of issues.\u003c\/p\u003e\u003cp\u003eThe WLN30 supports TCP and UDP network protocols for maximum compatibility with apps. If you want to have full bi-directional control of an autopilot, with guaranteed data integrity or you want to be the only person receiving the data, then select TCP. If however, you want to receive the same data on multiple devices, for instance a PC at the chart table and an iPad on deck, then select the UDP broadcast protocol.\u003c\/p\u003e\u003cp\u003eWith its three NMEA0183 inputs, you can also utilise our SeaTalk to NMEA adaptor to allow SeaTalk instrument data to be interfaced directly to the WLN30 or our iKonvert gateway to connect NMEA 2000 data. Now works with the popular Navionics Boating App for Apple iOS and Android to display GPS and AIS data on your Navionics charts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThree input NMEA 0183 to WiFi Multiplexer (4800 baud or 38400 baud)\u003c\/li\u003e\n\u003cli\u003eMultiplexed data transmitted over Wi-Fi and NMEA 0183 Output\u003c\/li\u003e\n\u003cli\u003eWeb interface for setup and initial programming\u003c\/li\u003e\n\u003cli\u003eSet baud rates, SSID and password through web interface\u003c\/li\u003e\n\u003cli\u003eSupports both TCP and UDP (for multiple connections) protocols\u003c\/li\u003e\n\u003cli\u003eView received NMEA data in web browser for easy fault finding of issues\u003c\/li\u003e\n\u003cli\u003eSupports a bi directional Wi-Fi interface for autopilot control\u003c\/li\u003e\n\u003cli\u003eFully compatible with popular navigation apps and software\u003c\/li\u003e\n\u003cli\u003eEasy to install IPX4 black box solution\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46386781290658,"sku":"83678","price":309.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/83678XL.jpg?v=1765329476"},{"product_id":"digital-yacht-cla2000-deep-sea-class-a-ais-transponder-83679","title":"Digital Yacht CLA2000 Deep Sea Class A AIS Transponder MPN - ZDIGCLA2000","description":"\u003cp\u003e\u003cstrong\u003eCLA2000 Deep Sea Class A AIS Transponder\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDigital Yacht’s CLA2000 is the ultimate SOLAS and inland waterway globally approved Class A AIS transponder. Water and weather proof to IP67, it has a full integrated 5” hi-res colour display supporting a wide range of functionality including electronic chart navigation with optional C-Map MAX charting and AIS target management.\u003c\/p\u003e\u003cp\u003eProven, superior real world AIS message receive and transmit and message processing performance is delivered by advanced core SDR AIS technology. This state of the art technology ensures you see more targets, more of the time and at maximum range.\u003c\/p\u003e\u003cp\u003eThe CLA2000 will find applications on SOLAS mandated vessels over 300GRT as well as workboats, rescue services, inland waterways users, RIBs, large yachts and any user wanting premium AIS performance and safety.\u003c\/p\u003e\u003cp\u003eThe CLA2000 has optimised software for detecting AIS SART and MOB devices with a dedicated icon for this class of AIS. An automatic alarm is activated on detection of an AIS SART beacon activation. The target plot display will also calculate relative bearing of the device for easy visualisation of the target and rescue.\u003c\/p\u003e\u003cp\u003eThe CLA2000 is fitted with a micro SD card reader located behind a waterproof cover on the front panel. This can support software updates, data logging of AIS and position data to a blank card as well as compatibility with C- Map MAX charting cards for optional detailed back ground charting.\u003c\/p\u003e\u003cp\u003eThe CLA2000 has an integrated wireless interface for sending AIS and position data to smart phones, tablets, PCs and MACs for use with 3rd party charting and navigation apps. It supports client mode where it can connect to an existing wireless network or AP mode where devices can connect directly to the CLA2000. Up to 5 simultaneous\/connected devices are possible.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGlobally approved Class A AIS transponder\u003c\/li\u003e\n\u003cli\u003eHigh resolution, 800 x 480 pixel 5” colour display (MKD) with easy to use, fast user interface\u003c\/li\u003e\n\u003cli\u003eBracket or flush mount – waterproof to IPX7\u003c\/li\u003e\n\u003cli\u003eIntegrated GPS with external antenna or utilise external NMEA feed (user selectable)\u003c\/li\u003e\n\u003cli\u003e3 x NMEA 0183 interface (bi-directional for plotter, ECDIS, radar etc)\u003c\/li\u003e\n\u003cli\u003e3 x sensor input ports (eg BlueBoard, external GNSS, gyro etc)\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 interface\u003c\/li\u003e\n\u003cli\u003eBuilt in SD card slot for software updates, AIS data port logging or C-Map MAX mapping capability with optional C-Map data card\u003c\/li\u003e\n\u003cli\u003eBuilt in wi-fi for connection to iPads and tablets for wireless navigation\u003c\/li\u003e\n\u003cli\u003eSophisticated AIS SART MOB alarm and display capability\u003c\/li\u003e\n\u003cli\u003eUser programmable alarms for CPA and TCPA\u003c\/li\u003e\n\u003cli\u003eAdvanced filtering of targets\u003c\/li\u003e\n\u003cli\u003eExternal alarm and remote silence switch capability\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46386781388962,"sku":"83679","price":2859.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/83679XL.jpg?v=1765329479"},{"product_id":"digital-yacht-nmea-2000-transducer-smart-sensor-dts810-86978","title":"Digital Yacht NMEA 2000 Transducer Smart Sensor DTS810 MPN - ZDIGDST810","description":"\u003cp\u003e\u003cstrong\u003eNMEA 2000 Transducer Smart Sensor DTS810\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis combination transducer gives you accurate information about depth, speed and water temperature. The transducer is supplied with a thru-hull \/ ground sleeve for installation in the bottom of the vessel. The transducer can be easily pulled out for cleaning and maintenance. The data from the Triducer can be displayed on any radar, chart plotter, or device that accepts NMEA 0183 or NMEA 2000® data. The Airmar type DST810 breakthrough sensor fits into the Airmar type P617V breakthrough sleeve (included with the DST810). Because the widely used airmar thru-hull transducer type DST800 is also supplied with the thru-hull type P617V, an exchange \/ upgrade of existing transducers of the type DST800 with the type DST810 is possible without much effort. Popular depth sensor for shallow water performance. \u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46386867470498,"sku":"86978","price":549.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/86978XL.jpg?v=1765331017"},{"product_id":"digital-yacht-cx4a-commercial-ais-vhf-antenna-87010","title":"Digital Yacht CX4A Commercial AIS\/VHF Antenna MPN - CX4A","description":"\u003cp\u003e\u003cstrong\u003eCX4A Commercial AIS\/VHF Antenna\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowerful AIS Tuned commercial VHF Antenna that will give you maximum AIS range. Has a SO239 antenna connector in the base of the Antenna and we recommend using this with low loss 50 ohm coax cable such as RG-213 for best performance (not supplied), particularly on long cable runs.\u003c\/p\u003e\u003cp\u003eA very high quality 3dB AIS tuned GRP antenna which is ideal for professional and super yacht installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3dB AIS tuned GRP antenna\u003c\/li\u003e\n\u003cli\u003e4ft long\u003c\/li\u003e\n\u003cli\u003eFit 1.25″ commercial grade fixing bases\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46386868551842,"sku":"87010","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/87010XL.jpg?v=1765331039"},{"product_id":"digital-yacht-4g-xtream-internet-nmea-2000-solution-91834","title":"Digital Yacht 4G Xtream Internet \u0026 NMEA 2000 Solution MPN - ZDIG4GX","description":"\u003cp\u003e\u003cstrong\u003e4G Xtream Internet \u0026amp; NMEA 2000 Solution\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDigital Yacht's 4G Xtream is the latest, premium LTE (cellular) Internet access product. It ships as a complete package with dual external antennas, deck mounting hardware, and cabling. Alternative antenna mounts are available as options.\u003c\/p\u003e\u003cp\u003eUsing MIMO technology and two external wideband LTE antennas, it offers fast connectivity at up to 300 MBs (network dependent). It has a built-in dual-band wifi router supporting multiple connections, dual SIM slots (with auto-failover if required), built-in GPS (for IOT and tracking applications) as well as an NMEA 2000 interface for navigation and instrument data connectivity and wireless interfacing. There’s also a Bluetooth interface for future connectivity applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLatest Cat 6 LTE MIMO technology with a range up to 25NM offshore (network dependent)\u003c\/li\u003e\n\u003cli\u003eDual SIM slots with auto-failover or manual selection\u003c\/li\u003e\n\u003cli\u003eTwo external, high gain, wide bandwidth antennas\u003c\/li\u003e\n\u003cli\u003eDual-band integrated wifi router (2.4 \u0026amp; 5 GHz) –independently configurable\u003c\/li\u003e\n\u003cli\u003eBuilt-in NMEA 2000 interface to transmit NMEA 2000 data over the wireless and wired network to compatible apps\u003c\/li\u003e\n\u003cli\u003eBuilt-in GPS with external patch antenna for IOT and tracking applications\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth with antenna for future applications\u003c\/li\u003e\n\u003cli\u003e3 x LAN ports\u003c\/li\u003e\n\u003cli\u003e1 x WAN port for additional internet connectivity –eg: WL510 high power wifi system\u003c\/li\u003e\n\u003cli\u003eDigital input\/output connectivity for IOT\/control applications (Available Q4 2021)\u003c\/li\u003e\n\u003cli\u003eSMS addressable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46387046842530,"sku":"91834","price":1759.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/91834XL.jpg?v=1765333655"},{"product_id":"digital-yacht-gps160f-w-furuno-format-data-output-96222","title":"Digital Yacht GPS160F with Furuno Format Data Output MPN - ZDIGGPS160F","description":"\u003cp\u003e\u003cstrong\u003eGPS160F with Furuno Format Data Output\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe GPS160 series of sensors is a high-performance GPS designed for use with chart plotters\u003c\/p\u003e\u003cp\u003eDigital Yacht has introduced a specific version of the GPS160 which is a simple replacement for older Furuno plotter and GPS systems.  Devices like the Furuno GP32, Navnet, and GPS310\/320 utilize a specific format for GPS data and this sensor emulates that for easy compatibility.  Some of these older GPS sensors have suffered from technical issues with the GPS rollover changes which can render chart plotter systems useless.  The GPS160F provides an economical and reliable solution to these problems.\u003c\/p\u003e\u003cp\u003eIn conjunction with Furuno UK, Digital Yacht has developed a special version of their popular GPS160 Smart GNSS Sensor “TriNav” that outputs the older NMEA 0183 sentences and data format that the legacy Furuno systems can read. Now if a Furuno customer has a problem with their existing Furuno GPS (GP310\/GP320\/GP32\/etc.) they can use the GPS160F as a simple “drop-in” replacement for their failed positioning sensor.\u003c\/p\u003e\u003cp\u003eThe GPS160F has been tested with a wide variety of legacy Furuno products including; the original NavNet MFDs, NavNet VX2, M1735 Radar, GP7000, and the FCV family of sounders.\u003c\/p\u003e\u003cp\u003eSupplied with a 10m cable and user manual with dedicated Furuno interfacing information, the GPS160F will work straight out of the box and just requires a simple 4-wire connection to the existing Furuno system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGPS160 for legacy Furuno systems\u003c\/li\u003e\n\u003cli\u003eRefined anti-spoofing algorithm for robust performance of position and interference rejection\u003c\/li\u003e\n\u003cli\u003eMany formats of NMEA data output including datum information –users can configure through internal DIP switches\u003c\/li\u003e\n\u003cli\u003eUltra-low (\u0026lt;20mA) power consumption at 12V DC\u003c\/li\u003e\n\u003cli\u003e10M cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46387242827938,"sku":"96222","price":329.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/96222XL.jpg?v=1765336795"},{"product_id":"digital-yacht-pilotlink2-class-a-pilot-plug-wifi-interface-97539","title":"Digital Yacht PilotLINK2 Class A Pilot Plug WiFi Interface MPN - ZDIGPLINK2","description":"\u003cp\u003e\u003cstrong\u003ePilotLINK2 Class A Pilot Plug WiFi Interface\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThere are well over 100,000 Class A AIS systems installed on vessels globally. While the latest Class A AIS transponders (like the Digital DeepSea CLA2000) already have a wireless interface incorporated for iPad and tablet connectivity, many systems just use a standardized “Pilot Plug” wired interface. This Amphenol standard multi-pin design allows NMEA AIS and GPS data to be accessed from the transponder and pilots and delivery captains would use a simple USB interface cable for their personal PC-based ECDIS system. However, more and more captains now choose to use an iPad or tablet so need wireless connectivity.\u003c\/p\u003e\u003cp\u003ePilotLINK2 allows these Class A transponders to interface with the latest range of mobile devices including iPhones, tablets, and PCs\/MACs. Applications range from maritime pilots to survey ship charter users who may want access to the ship’s AIS and GPS data.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConnects to any standard “Pilot Plug” connector\u003c\/li\u003e\n\u003cli\u003eUSB powered for easy portability power from any USB source, adaptor, or power pack\u003c\/li\u003e\n\u003cli\u003eCreates secure password protected wifi network\u003c\/li\u003e\n\u003cli\u003eCan also join another wifi network if preferred\u003c\/li\u003e\n\u003cli\u003eEasy web interface with useful diagnostics display and Class A static, dynamic, and voyage data displays\u003c\/li\u003e\n\u003cli\u003eWorks with 100’s apps iSailor, Navionics, iNAVx, NavLINK, TZ iBoat, Imray, NV Charts, AquaMaps, Weather 4D, etc\u003c\/li\u003e\n\u003cli\u003eTCP\/IP and UDP protocols supported\u003c\/li\u003e\n\u003cli\u003eThe raw data log function\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInterface\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSet up of PilotLINK is simple using any web browser on the connected device. View data, set up wireless passwords or join another wireless network and also view Class A AIS status. Your favourite apps connect using TCP\/IP or UDP protocols.\u003c\/p\u003e\u003cp\u003eThe data monitor shows a list of raw NMEA data. You can also log this data for analysis if required.\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46387296075938,"sku":"97539","price":339.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/97539XL.jpg?v=1765337671"},{"product_id":"digital-yacht-wi-fi-booster-f-4gxtream-98739","title":"Digital Yacht Wi-Fi Booster for 4GXtream MPN - ZDIG4GXWL","description":"\u003cp\u003e\u003cstrong\u003eWi-Fi Booster for 4GXtream\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e4GXtream is the latest, premium LTE (cellular) internet access onboard product with an NMEA 2000 interface.  It ships as a complete package with dual external antennas, deck mounting hardware, and cabling.  Alternative antenna mounts are available as options.\u003c\/p\u003e\u003cp\u003eUsing MIMO technology and two external wide band LTE antennas, it offers fast connectivity at up to 300 MBs (network dependent).  It has a built-in dual band wifi router supporting multiple connections, dual SIM slots (with auto fail-over if required), built-in GPS (for IOT and tracking applications) as well as an NMEA 2000 interface for navigation and instrument data connectivity and wireless interfacing.  There’s also a Bluetooth interface for future connectivity applications.\u003c\/p\u003e\u003cp\u003eIt will sit alongside our existing 4G Connect Pro as a premium product and is ideal for use on large yachts, workboats, tugs, and commercial ships where reliable, low-cost coastal internet and in-port connectivity are required. 4GXtream features independent dual band (2.4 \u0026amp; 5GHz) wifi for interconnection to mobile devices.  This also provides the connectivity for NMEA data so apps on mobile devices can utilize the boat's navigation and instrumentation data.\u003c\/p\u003e\u003cp\u003eFor external hi-power wifi (to access shoreside hotspots) our booster WiFi kit is recommended which connects to the WAN port.  4GXtream can then act as a router for this connection and allow the user to switch from wifi to LTE.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLatest Cat 6 LTE MIMO technology with a range of up to 25NM offshore (network dependent)\u003c\/li\u003e\n\u003cli\u003eDual SIM slots with auto fail-over or manual selection\u003c\/li\u003e\n\u003cli\u003eTwo external, high gain, wide bandwidth antennas\u003c\/li\u003e\n\u003cli\u003eDual-band integrated wifi router (2.4 \u0026amp; 5 GHz) – independently configurable\u003c\/li\u003e\n\u003cli\u003eBuilt in NMEA 2000 interface to transmit NMEA 2000 data over the wireless and wired network to compatible apps\u003c\/li\u003e\n\u003cli\u003eBuilt in GPS with external patch antenna for IOT and tracking applications\u003c\/li\u003e\n\u003cli\u003eBuilt in Bluetooth with antenna for future applications\u003c\/li\u003e\n\u003cli\u003e3 x LAN ports\u003c\/li\u003e\n\u003cli\u003e1 x WAN port for additional internet connectivity – eg: WL510 high power wifi system\u003c\/li\u003e\n\u003cli\u003eDigital input\/output connectivity for IOT\/control applications (Available Q3 2021)\u003c\/li\u003e\n\u003cli\u003eSMS addressable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46387351879842,"sku":"98739","price":549.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/98739XL.jpg?v=1765338550"},{"product_id":"digital-yacht-ns5-5-port-marine-network-switch-99482","title":"Digital Yacht NS5 5 Port Marine Network Switch MPN - ZDIGNS5","description":"\u003cp\u003e\u003cstrong\u003eNS5 5 Port Marine Network Switch\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMore and more boats now have a wireless router fitted or utilize devices like our 4G Connect for internet connectivity. For optimum data transfer speed, a wired Ethernet connection still offers the fastest and most reliable network connection onboard a boat, and for Streaming TV, VOIP, Security Cameras, and other data-intensive services we always recommend using a wired connection.\u003c\/p\u003e\u003cp\u003eOur NS5 Network Switch provides a simple and rugged solution to increasing the number of wired Ethernet connections on the vessel. Designed to operate from a 9v to 36v DC supply, with dual redundancy power supply design, a DIN rail mount, and five RJ45 10\/100 Ethernet ports, the NS5 allows you to reliably expand your boat’s Ethernet network.\u003c\/p\u003e\u003cp\u003eInstallation could not be easier, simply connect one of the NS5’s RJ45 sockets to a LAN socket on our 4GConnect or 4GXtream routers, using a normal network cable and wire the NS5 directly to the boat’s 12v or 24v DC supply. Our 4G router will continue to provide IP addresses to any device plugged into the NS5 (via DHCP) and you can immediately see the status of all the Ethernet connections by the flashing Yellow and Green LEDs on each of the NS5’s ports.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e5 Port Network Switch\u003c\/li\u003e\n\u003cli\u003e12\/24v DC low power operation\u003c\/li\u003e\n\u003cli\u003eDual redundancy power supply design\u003c\/li\u003e\n\u003cli\u003eConnects to the router via RJ45 Cat 5\/6 network cable connection\u003c\/li\u003e\n\u003cli\u003eSupports 10\/100 base-T\u003c\/li\u003e\n\u003cli\u003eDIN Rail (IEC\/EN 60715 – 35 × 7.5mm) mounting bracket and 100mm rail included\u003c\/li\u003e\n\u003cli\u003eStatus indicators for power and network link status\u003c\/li\u003e\n\u003cli\u003eVersion: NMEA0183, NMEA2000\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46387384418466,"sku":"99482","price":189.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/99482XL.jpg?v=1765339078"},{"product_id":"digital-yacht-iseasense-wireless-speed-depth-temp-pack-99663","title":"Digital Yacht iSeaSense Wireless Speed Depth Temp Pack MPN - ZDIGISSPK1","description":"\u003cp\u003e\u003cstrong\u003eiSeaSense Wireless Speed Depth Temp Pack\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDigital Yacht iSeaSense is a new range of complete marine instrumentation packs based on NMEA 2000 and wireless connectivity – allowing for maximum flexibility and connectivity. Choose from using phones, iPads, and tablets for boat data displays as well as 3rd party industry-standard instruments and multi-function displays.\u003c\/p\u003e\u003cp\u003eTop quality and highly accurate sensors are used for boat depth, speed, compass, and GPS data. Data can be shared with other devices on the NMEA 2000 network too.\u003c\/p\u003e\u003cp\u003eiSeaSense is easy to specify. Available as two main starter packs, everything is included for easy installation and ordering.  No app is needed either as the iSeaSense wireless server creates powerful graphical and numeric display pages that can be viewed via a browser on any device.\u003c\/p\u003e\u003cp\u003eiSeaSense Pack 1 is a comprehensive boat depth, speed, and temperature pack.  A spatial sensor is also included for detecting pitch and roll and there’s a sophisticated algorithm for calibrating boat speed information based on heel.\u003c\/p\u003e\u003cp\u003eA full NMEA 2000 backbone cabling pack is included and the wireless interface for connectivity. There is a spare cable and connection point for additional NMEA 2000 devices such as a multi-function display or Digital Yacht’s range of instruments.\u003c\/p\u003e\u003cp\u003eiSeaSense features an easy-to-use web interface.  No apps are required. Simply open the browser on a connected device, navigate to iSeaSense.local, and the optimized touchscreen display is ready.\u003c\/p\u003e\u003cp\u003eThe web interface works on iOS, Android, PC, Linux, and MAC – any standard web browser as well as e-ink displays like Kindle and e-book. It supports up to 3 connected devices with super fast 5Hz updates.\u003c\/p\u003e\u003cp\u003eThe data can also be used by 100’s popular navigation apps \u0026amp; software such as Navionics, TZ iBoat, OpenCPN, SailGrib, etc.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOperation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYou can access the iSeaSense dashboard through its own web interface, just open your web browser, enter the iSeaSense’s IP address or iSeaSense.local and you will access the attractive dash to display all your instrument's data. So no complicated programming software or app is required.\u003c\/p\u003e\u003cp\u003eBy default, iSeaSense has a series of pre-defined pages that display digital databoxes and analog “instruments” of the instrument and navigation data available on the NMEA 2000 network.\u003c\/p\u003e\u003cp\u003eWith iSeaSense you’re in control of the data you see. The pages are fully editable, so any databox can be configured for the information you want and you can easily add and remove databox to build your perfect display.  The configuration can also be saved and shared – ideal for standard configurations for production boats and OEMs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eiSeaSense Pack Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePack includes iSeaSense wireless server, NMEA 2000 cabling, and advanced boat depth, speed, and temperature transducer with pitch and heel sensor\u003c\/li\u003e\n\u003cli\u003eiSeaSense server creates beautiful graphic display pages of data with fast 5Hz updates viewable on any smartphone, tablet, or iPad\u003c\/li\u003e\n\u003cli\u003eAdvanced calibration routing is available for the transducer with corrections for the boat heel and transducer location\u003c\/li\u003e\n\u003cli\u003eIncludes extra NMEA 2000 T piece for system expansion allowing easy addition of sensors or displays\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInterface Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNMEA 2000 interface and wireless gateway for iSeaSense system. Integrated instrument display page server.\u003c\/li\u003e\n\u003cli\u003eConfigurable display pages for depth, speed, temp, time, GPS, wind, navigation, and compass\u003c\/li\u003e\n\u003cli\u003eNetwork diagnostics, settings, and calibration capability\u003c\/li\u003e\n\u003cli\u003eData logging\u003c\/li\u003e\n\u003cli\u003eSelf-powered from NMEA 2000 backbone\u003c\/li\u003e\n\u003cli\u003eIntegrated wifi antenna typically footprints boats up to 20m\u003c\/li\u003e\n\u003cli\u003eSupports additional TCP\/IP and UDP data connections for 3rd party apps on up to 7 connected devices (outputs GPS, AIS, depth, wind, and speed information from NMEA 2000 bus)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTransducer Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTransducer for depth, boat speed, water temperature, and boat heel\/pitch with fast, super accurate 5Hz speed updates from 0.3 to 45 knot\u003c\/li\u003e\n\u003cli\u003eData Update Rate: Depth: 1X\/second, Speed: 5X\/second, Heel\/Trim: 10X\/second\u003c\/li\u003e\n\u003cli\u003e235KHz depth operation to minimize interference with 50\/200KHz fish finders and sounders\u003c\/li\u003e\n\u003cli\u003eMax depth 100m\u003c\/li\u003e\n\u003cli\u003eSupports up to 22-degree hull deadrise\u003c\/li\u003e\n\u003cli\u003eSupplied with 6m NMEA 2000 cable and self-powered from iSeaSense NMEA 2000 backbone\u003c\/li\u003e\n\u003cli\u003eStandard 2” thru hull size\/diameter\u003c\/li\u003e\n\u003cli\u003eIncludes Bluetooth interface for advanced calibration and set-up features if required\u003c\/li\u003e\n\u003cli\u003eStainless steel and bronze skin fittings available as an option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46387392217250,"sku":"99663","price":929.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/99663XL.jpg?v=1765339199"}],"url":"https:\/\/marinerswarehouse.com\/collections\/digital-yacht-marine-navigation-and-network-gear.oembed?page=4","provider":"Mariners Warehouse Shop","version":"1.0","type":"link"}