{"title":"Digital Yacht Marine Navigation and Network Gear","description":"\u003cp\u003eExplore Digital Yacht marine AIS, GPS and network equipment for navigation and onboard systems.\u003c\/p\u003e","products":[{"product_id":"digital-yacht-ais100-ais-receiver","title":"Digital Yacht AIS100 AIS Receiver MPN - ZDIGAIS100","description":"\u003cp\u003e\u003cb\u003eDigital Yacht AIS100 Receiver\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGAIS100\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eLow cost entry level AIS receiver\u003c\/li\u003e\n\u003cli\u003eHigh performance dual-channel AIS receiver for use with existing plotter and radar systems\u003c\/li\u003e\n\u003cli\u003eHigh speed NMEA output (38,400 baud)\u003c\/li\u003e\n\u003cli\u003eRequires VHF antenna or dedicated AIS antenna (available as optional accessory) or splitter\u003c\/li\u003e\n\u003cli\u003eEasy to install IP54 black box solution\u003c\/li\u003e\n\u003cli\u003eBNC antenna connector\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis value priced, entry level AIS receiver is Digital Yacht's most cost effective solution for adding AIS to your boat. Featuring the same dual channel receiver as the AIS100Pro, but without the USB interface and multiplexer, there is no compromise on performance and the AIS100 will out-perform all other, inferior, single channel receivers.\u003c\/p\u003e\u003cp\u003eFor use with existing AIS compatible chart plotters, such as the latest Garmin, Raymarine, Navico, Standard Horizon and Furuno units. Typical AIS reception range is 20 - 20 m for a mast top antenna.\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385149149346,"sku":"DIYZDIGAIS100","price":349.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGAIS100.jpg?v=1765303084"},{"product_id":"digital-yacht-gps160-trinav-gps-glonass-galileo-sensor-nmea0183","title":"Digital Yacht GPS160 Sensor for GPS, Galileo and Glonass Satellite Systems, NMEA0183 Output MPN - ZDIGGPS160","description":"\u003cp\u003e\u003cb\u003eDigital Yacht GPS160 Sensor for GPS, Galileo and Glonass Satellite Systems, NMEA0183 Output\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGGPS160\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e72 channel GPS, Glonass and Galileo GNSS positioning receiver\u003c\/li\u003e\n\u003cli\u003eTypically sub 1m accuracy thanks to TriNavTM technology -combines all satellite data for optimum accuracy\u003c\/li\u003e\n\u003cli\u003eCan be configured as dedicated GPS, Glonass or Galileo only device\u003c\/li\u003e\n\u003cli\u003eSophisticated anti-spoofing algorithm for robust positioning performance and interference rejection\u003c\/li\u003e\n\u003cli\u003eUser\/field selectable 4800, 38400 and 115200 baud operation through simple internal DIP switches\u003c\/li\u003e\n\u003cli\u003eMultiple formats of NMEA data output including datum information -user configurable through internal DIP switches\u003c\/li\u003e\n\u003cli\u003eUp to 18Hz update rate (user selectable)\u003c\/li\u003e\n\u003cli\u003eUltra low (\u0026lt;20mA) power consumption at 12V DC\u003c\/li\u003e\n\u003cli\u003e10m cable\u003c\/li\u003e\n\u003cli\u003eInput for MOB switch\/system -when activated generates synthetic AIS MOB NMEA output to activate MOB position on plotter\u003c\/li\u003e\n\u003cli\u003eProfessional system (ECDIS) support with datum sentence structure (DTM\/GBS\/GNS\/GRS\/GSA\/GST)\u003c\/li\u003e\n\u003cli\u003ePuck installation or fits 3rd party industry standard 1 in x 14TPI threaded mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDigital Yacht have unveiled their TriNavTM GPS160, a new, high performance positioning sensor using GPS, Glonass and the new Galileo satellite systems for exceptional positioning accuracies and redundancies. Typical accuracy is better than 1m and data can be set to output at up to 18Hz for smoother plotter track displays. TriNavTM software technology also improves positioning vulnerabilities that could occur through spoofing and local interference.\u003c\/p\u003e\u003cp\u003eThe device can be field programmed for a variety of modes such as single GNSS operation (eg Galileo only) as well as output configurations such as update rate, NMEA sentence structure etc\u003c\/p\u003e\u003cp\u003eThe GPS160 is available with a NMEA 0183 output (4800, 38400 and 115200 baud programmable) and a USB variant for PC, MAC and Linux. For NMEA 2000 systems, a bundle is available with a Digital Yacht iKonvert NMEA 2000 gateway allowing easy and flexible NMEA 2000 installation without the need for cumbersome drop cables.\u003c\/p\u003e\u003cp\u003eThe GPS160 also supports a simple external MOB (man-over-board) switch or device. When activated, the GPS160 creates a \"synthesised\" AIS SART MOB message on its NMEA output which can be interfaced with a local plotter for MOB identification. Most modern plotters support this with a clear MOB icon and instant bearing and distance information to navigate to the casualty.\u003c\/p\u003e\u003cp\u003eGalileo is the new global navigation satellite system (GNSS) that has been developed over the past two decades. It joins the GPS and GLONASS systems and offers mariners a 3rd reliable positioning source. It is planned to be fully operational in 2020.\u003c\/p\u003e\u003cp\u003eThere are currently 22 satellites in usable condition (satellite is operational and contributing to the service provision), 2 satellites are in \"testing\" and 2 more are marked as not available. The final constellation should be deployed by 2020 and will consist of 30 satellites (24 operational and 6 spares).\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385149706402,"sku":"DIYZDIGGPS160","price":209.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGGPS160.jpg?v=1765303088"},{"product_id":"digital-yacht-gps160-trinav-gps-glonass-galileo-sensor-nmea2000-ikonvert-bundle","title":"Digital Yacht GPS160 TriNav GPS. Glonass, Galileo Sensor NMEA2000 iKonvert Bundle MPN - ZDIGGPS160N2K","description":"\u003cp\u003e\u003cb\u003eDigital Yacht DIGGPS160N2K GPS160 supplied with iKonvert (NMEA2000-NMEA0183 converter)\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGGPS160N2K\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e72 channel GPS, Glonass and Galileo GNSS positioning receiver\u003c\/li\u003e\n\u003cli\u003eSupplied with iKonvert (NMEA2000-NMEA0183 converter) allowing easy and flexible NMEA 2000 installation\u003c\/li\u003e\n\u003cli\u003eTypically sub 1m accuracy thanks to TriNavTM technology -combines all satellite data for optimum accuracy\u003c\/li\u003e\n\u003cli\u003eCan be configured as dedicated GPS, Glonass or Galileo only device\u003c\/li\u003e\n\u003cli\u003eSophisticated anti-spoofing algorithm for robust positioning performance and interference rejection\u003c\/li\u003e\n\u003cli\u003eUser\/field selectable 4800, 38400 and 115200 baud operation through simple internal DIP switches\u003c\/li\u003e\n\u003cli\u003eMultiple formats of NMEA data output including datum information -user configurable through internal DIP switches\u003c\/li\u003e\n\u003cli\u003e10m cable\u003c\/li\u003e\n\u003cli\u003eUp to 18Hz update rate (user selectable)\u003c\/li\u003e\n\u003cli\u003eUltra low (\u0026lt;20mA) power consumption at 12V DC\u003c\/li\u003e\n\u003cli\u003eInput for MOB switch\/system -when activated generates synthetic AIS MOB NMEA output to activate MOB position on plotter\u003c\/li\u003e\n\u003cli\u003eProfessional system (ECDIS) support with datum sentence structure (DTM\/GBS\/GNS\/GRS\/GSA\/GST)\u003c\/li\u003e\n\u003cli\u003ePuck installation or fits 3rd party industry standard 1 in x 14TPI threaded mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDigital Yacht have unveiled their TriNavTM GPS160, a new, high performance positioning sensor using GPS, Glonass and the new Galileo satellite systems for exceptional positioning accuracies and redundancies. Typical accuracy is better than 1m and data can be set to output at up to 18Hz for smoother plotter track displays. TriNavTM software technology also improves positioning vulnerabilities that could occur through spoofing and local interference.\u003c\/p\u003e\u003cp\u003eThe device can be field programmed for a variety of modes such as single GNSS operation (eg Galileo only) as well as output configurations such as update rate, NMEA sentence structure etc\u003c\/p\u003e\u003cp\u003eThe GPS160 NMEA 2000 version is supplied with Digital Yacht iKonvert NMEA 2000 gateway allowing easy and flexible NMEA 2000 installation without the need for cumbersome drop cables. It allows an easy and thin 10m cable to be run from the GPS160 to the nearest point on the NMEA 2000 backbone for the iKonvert to connect to.\u003c\/p\u003e\u003cp\u003eThe GPS160 also supports a simple external MOB (man-over-board) switch or device. When activated, the GPS160 creates a \"synthesised\" AIS SART MOB message on its NMEA output which can be interfaced with a local plotter for MOB identification. Most modern plotters support this with a clear MOB icon and instant bearing and distance information to navigate to the casualty.\u003c\/p\u003e\u003cp\u003eGalileo is the new global navigation satellite system (GNSS) that has been developed over the past two decades. It joins the GPS and GLONASS systems and offers mariners a 3rd reliable positioning source. It is planned to be fully operational in 2020.\u003c\/p\u003e\u003cp\u003eThere are currently 22 satellites in usable condition (satellite is operational and contributing to the service provision), 2 satellites are in \"testing\" and 2 more are marked as not available. The final constellation should be deployed by 2020 and will consist of 30 satellites (24 operational and 6 spares).\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385149739170,"sku":"DIYZDIGGPS160N2K","price":399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGGPS160N2K.jpg?v=1765303089"},{"product_id":"digital-yacht-gps160-trinav-gps-glonass-galileo-sensor-seatalk-1-bundle","title":"Digital Yacht GPS160 TriNav GPS. Glonass, Galileo Sensor SeaTalk 1 Bundle MPN - ZDIGGPS160ST","description":"\u003cp\u003e\u003cb\u003eDigital Yacht GPS160ST SeaTalk version is supplied with Digital Yacht SeaTalk1 to NMEA0183 converter\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGGPS160ST\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e72 channel GPS, Glonass and Galileo GNSS positioning receiver\u003c\/li\u003e\n\u003cli\u003eSupplied with Digital Yacht SeaTalk1 to NMEA0183 converter allowing easy replacement of older Raystar sensors\u003c\/li\u003e\n\u003cli\u003eTypically sub 1m accuracy thanks to TriNavTM technology -combines all satellite data for optimum accuracy\u003c\/li\u003e\n\u003cli\u003eCan be configured as dedicated GPS, Glonass or Galileo only device\u003c\/li\u003e\n\u003cli\u003eSophisticated anti-spoofing algorithm for robust positioning performance and interference rejection\u003c\/li\u003e\n\u003cli\u003eUser\/field selectable 4800, 38400 and 115200 baud operation through simple internal DIP switches\u003c\/li\u003e\n\u003cli\u003eMultiple formats of NMEA data output including datum information -user configurable through internal DIP switches\u003c\/li\u003e\n\u003cli\u003e10m cable\u003c\/li\u003e\n\u003cli\u003eUp to 18Hz update rate (user selectable)\u003c\/li\u003e\n\u003cli\u003eUltra low (\u0026lt;20mA) power consumption at 12V DC\u003c\/li\u003e\n\u003cli\u003eProfessional system (ECDIS) support with datum sentence structure (DTM\/GBS\/GNS\/GRS\/GSA\/GST)\u003c\/li\u003e\n\u003cli\u003ePuck installation or fits 3rd party industry standard 1 in x 14TPI threaded mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePuck installation or fits 3rd party industry standard 1 in x 14TPI threaded mount\u003c\/p\u003e\u003cp\u003eThe device can be field programmed for a variety of modes such as single GNSS operation (eg Galileo only) as well as output configurations such as update rate, NMEA sentence structure etc\u003c\/p\u003e\u003cp\u003eThe GPS160 SeaTalk version is supplied with Digital Yacht SeaTalk1 to NMEA0183 converter allowing easy replacement of older Raystar sensors. Digital Yacht's SeaTalk to NMEA (ISO) Converter is a small but powerful interface that provides bi-directional conversion between a SeaTalk network and an NMEA0183 network. It takes its power from the SeaTalk1 network.\u003c\/p\u003e\u003cp\u003eGalileo is the new global navigation satellite system (GNSS) that has been developed over the past two decades. It joins the GPS and GLONASS systems and offers mariners a 3rd reliable positioning source. It is planned to be fully operational in 2020.\u003c\/p\u003e\u003cp\u003eThere are currently 22 satellites in usable condition (satellite is operational and contributing to the service provision), 2 satellites are in \"testing\" and 2 more are marked as not available. The final constellation should be deployed by 2020 and will consist of 30 satellites (24 operational and 6 spares).\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385149968546,"sku":"DIYZDIGGPS160ST","price":399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGGPS160ST.jpg?v=1765303091"},{"product_id":"digital-yacht-gps160-trinav-gps-glonass-galileo-sensor-usb-bundle","title":"Digital Yacht GPS160 TriNav GPS. Glonass, Galileo Sensor USB Bundle MPN - ZDIGGPS160USB","description":"\u003cp\u003e\u003cb\u003eDigital yacht DIGGPS160USB variant ships with a 5m USB cable\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGGPS160USB\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e72 channel GPS, Glonass and Galileo GNSS positioning receiver\u003c\/li\u003e\n\u003cli\u003eFitted with a 5M USB cable\u003c\/li\u003e\n\u003cli\u003eIt's self powered from the USB source (PC, MAC or Linux)\u003c\/li\u003e\n\u003cli\u003eTypically sub 1m accuracy thanks to TriNavTM technology -combines all satellite data for optimum accuracy\u003c\/li\u003e\n\u003cli\u003eCan be configured as dedicated GPS, Glonass or Galileo only device\u003c\/li\u003e\n\u003cli\u003eSophisticated anti-spoofing algorithm for robust positioning performance and interference rejection\u003c\/li\u003e\n\u003cli\u003eUser\/field selectable 4800, 38400 and 115200 baud operation through simple internal DIP switches\u003c\/li\u003e\n\u003cli\u003eMultiple formats of NMEA data output including datum information -user configurable through internal DIP switches\u003c\/li\u003e\n\u003cli\u003eUp to 18Hz update rate (user selectable)\u003c\/li\u003e\n\u003cli\u003eUltra low (\u0026lt;20mA) power consumption at 12V DC\u003c\/li\u003e\n\u003cli\u003eProfessional system (ECDIS) support with datum sentence structure (DTM\/GBS\/GNS\/GRS\/GSA\/GST)\u003c\/li\u003e\n\u003cli\u003ePuck installation or fits 3rd party industry standard 1 in x 14TPI threaded mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDigital Yacht have unveiled their TriNavTM GPS160, a new, high performance positioning sensor using GPS, Glonass and the new Galileo satellite systems for exceptional positioning accuracies and redundancies. Typical accuracy is better than 1m and data can be set to output at up to 18Hz for smoother plotter track displays. TriNavTM software technology also improves positioning vulnerabilities that could occur through spoofing and local interference.\u003c\/p\u003e\u003cp\u003eThe device can be field programmed for a variety of modes such as single GNSS operation (eg Galileo only) as well as output configurations such as update rate, NMEA sentence structure etc.\u003c\/p\u003e\u003cp\u003eThe GPS160USB variant ships with a 5m USB cable. It's self powered from the USB source (PC, MAC or Linux). When installed, a virtual COM port is created on the host PC so navigation programs can receive positioning data. If a longer cable or the MOB feature is required, it's best to utilise the GPS160 (standard NMEA version) with our USB-NMEA adaptor cable.\u003c\/p\u003e\u003cp\u003eGalileo is the new global navigation satellite system (GNSS) that has been developed over the past two decades. It joins the GPS and GLONASS systems and offers mariners a 3rd reliable positioning source. It is planned to be fully operational in 2020.\u003c\/p\u003e\u003cp\u003eThere are currently 22 satellites in usable condition (satellite is operational and contributing to the service provision), 2 satellites are in \"testing\" and 2 more are marked as not available. The final constellation should be deployed by 2020 and will consist of 30 satellites (24 operational and 6 spares).\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385150001314,"sku":"DIYZDIGGPS160USB","price":289.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGGPS160USB.jpg?v=1765303092"},{"product_id":"digital-yacht-ikonvert-nmea-2000-0183-gateway-converter-with-usb","title":"Digital Yacht iKonvert NMEA 2000\/0183 Gateway Converter with USB MPN - ZDIGIKVTUSB","description":"\u003cp\u003e\u003cb\u003eDgital Yacht DIGIKVTUSB NMEA2000 Gateway\/Converter\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGIKVTUSB\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eSmall but powerful bi-directional NMEA2000 Gateway\/Converter\u003c\/li\u003e\n\u003cli\u003ePowered from the NMEA2000 network\u003c\/li\u003e\n\u003cli\u003eHigh Speed USB 2.0 USB Interface (FTDI)v\u003c\/li\u003e\n\u003cli\u003eCompatible with Windows, OSX, LINUX and Android\u003c\/li\u003e\n\u003cli\u003eCan be configured to operate in \"Raw Mode\" (Binary PGN data)\u003c\/li\u003e\n\u003cli\u003eConverts all of the key navigational data\u003c\/li\u003e\n\u003cli\u003eIntegral USB (Type A) and NMEA2000 Micro (Male) cables\u003c\/li\u003e\n\u003cli\u003eSimple configuration of data modes using DIP switches\u003c\/li\u003e\n\u003cli\u003eFull galvanic isolation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe iKonvert NMEA2000-0183 Gateway\/Converter is an intelligent and flexible gateway for allowing software applications to read\/write NMEA2000 data, either as RAW binary PGN data for ultimate analysis and control or converted to the older and more commonly supported NMEA0183 data.\u003c\/p\u003e\u003cp\u003eEvery popular Marine Navigation application that runs on PC\/MAC\/LINUX computers, can read NMEA0183 data and for all of those programs, iKonvert provides a simple, reliable and cost effective way to access the navigation data on an NMEA2000 network. Simply set the DIP switches inside iKonvert to the required data mode that you want to use and iKonvert will extract the selected data from the NMEA2000 network and provide them to your marine application in a format and at a baud rate they support.\u003c\/p\u003e\u003cp\u003eFor developers creating new applications or who know how to decode NMEA2000 PGNs, iKonvert can be easily set to its \"RAW Mode\" where data can be read\/written to using a simple serial data format that we publish on our iKonvert Github site. No special libraries or proprietary code are required to integrate iKonvert, which has attracted the interest of a number of developers and it is already compatible with CanBoat and the popular Signal K Node Server.\u003c\/p\u003e\u003cp\u003eDigital Yacht's iKonvert Gateway is housed in a compact and easy to mount housing, with an integral USB cable and standard NMEA2000 Micro drop cable (male). Taking its power from the NMEA2000 network, and providing full galvanic isolation between the USB interface and NMEA2000 network, iKonvert operates at a baud rate of 230KB in \"RAW mode\" and 4.8KB, 38.4KB or 115KB in NMEA0183 conversion modes. All modes can be simply selected using the internal DIP switches with no special configuration software or firmware changes required.\u003c\/p\u003e\u003cp\u003eiKonvert's USB interface features an FTDI chip that has the most reliable and compatible USB drivers for all of the popular operating systems (Windows\/Mac\/LINUX\/Android), whilst an ISO Version of iKonvert will soon be released for direct connection between NMEA2000 and NMEA0183 systems.\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385150263458,"sku":"DIYZDIGIKVTUSB","price":259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGIKVTUSB.jpg?v=1765303094"},{"product_id":"digital-yacht-navlink-2-nmea-2000-wifi-gateway","title":"Digital Yacht Navlink 2 NMEA 2000 - WiFi Gateway MPN - ZDIGNLINK","description":"\u003cp\u003e\u003cb\u003eDigital Yacht NavLink 2 NMEA 2000 to Wifi server\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGNLINK\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eNMEA 2000 to Wifi server\u003c\/li\u003e\n\u003cli\u003eSelf powered from NMEA 2000 bus - fits in seconds\u003c\/li\u003e\n\u003cli\u003eSupports TCP\/IP and UDP connection modes\u003c\/li\u003e\n\u003cli\u003eProvides AIS, navigation and instrument data to apps\u003c\/li\u003e\n\u003cli\u003eCompatible with all popular apps like iNavX, TimeZero, Weather 4D, Navionics, SailGrib, NavLink, iSailor, SeaPilot, AquaMap etc\u003c\/li\u003e\n\u003cli\u003eUp to 7 connected devices\u003c\/li\u003e\n\u003cli\u003eCompatible with Windows, Linux, MAC OS, iOS and Android\u003c\/li\u003e\n\u003cli\u003eEasy web interface for programming\u003c\/li\u003e\n\u003cli\u003ePassword protected\u003c\/li\u003e\n\u003cli\u003eCan act as dedicated wireless server or can connect to an existing wireless network\u003c\/li\u003e\n\u003cli\u003eDiagnostic data display mode and LED status lights\u003c\/li\u003e\n\u003cli\u003eInternal hi gain wifi antenna\u003c\/li\u003e\n\u003cli\u003eSuper-fast 230KBs operation\u003c\/li\u003e\n\u003cli\u003eOptional raw data mode for developers and advanced users\u003c\/li\u003e\n\u003cli\u003eSupplied with NMEA 2000 cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNavLink 2 is an easy to fit NMEA 2000 to Wifi server designed to make NMEA 2000 navigation data available for apps on smartphones, tablets, iPads and PCs. It connects direct to the NMEA 2000 back bone and is also self-powered from the data network so installation literally takes seconds.\u003c\/p\u003e\u003cp\u003eOnce installed, it creates a local wifi network for devices to connect or can be programmed to join an existing wireless network if one is already installed. This is ideal for devices like the Furuno wireless radar which require operation through their own dedicated network but require NMEA 2000 data integration for charting apps. Now works with the popular Navionics Boating App for Apple iOS and Android to display GPS and AIS data on your Navionics charts.\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385150460066,"sku":"DIYZDIGNLINK","price":309.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGNLINK.jpg?v=1765303095"},{"product_id":"digital-yacht-spl1500-splitter-vhf-ais-from-one-antenna","title":"Digital Yacht SPL1500 Splitter VHF-AIS from One Antenna MPN - ZDIGSPL1500","description":"\u003cp\u003e\u003cb\u003eDigital Yacht SPL1500 AIS-VHF Antenna Splitter\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGSPL1500\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eEnables an existing VHF antenna to be used for both the standard VHF and AIS system\u003c\/li\u003e\n\u003cli\u003ePatented ZeroLossTM technology for exceptional performance\u003c\/li\u003e\n\u003cli\u003eWorks with all Class B transponders and receivers\u003c\/li\u003e\n\u003cli\u003eSupplied with power cable, PL259-PL259 cable assembly and BNC-BNC cable assembly for easy installation (all cables 0.75m long)\u003c\/li\u003e\n\u003cli\u003e12v or 24v 0peration and low power consumption\u003c\/li\u003e\n\u003cli\u003eFail safe operation\u003c\/li\u003e\n\u003cli\u003eSame size and design as the AIT1500\u003c\/li\u003e\n\u003cli\u003eMakes installation of an AIS receiver or transponder very quick and simple\u003c\/li\u003e\n\u003cli\u003eSaves on additional antenna clutter\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAn AIS receiver or transponder requires a VHF antenna, but Digital Yacht's new SPL1500 AIS-VHF antenna splitter allows an existing antenna to be used for both the AIS and VHF (DSC). Unlike most simple splitters, it can also be used with a class B transponder system and it incorporates special circuitry to ensure safe operation of the two transmitting devices.\u003c\/p\u003e\u003cp\u003eThe unit has three simple connections - one input for the main VHF antenna and then outputs for the AIS receiver\/transponder and another for the DSC VHF. It utilises Digital Yacht's new, patented, ZeroLossTM technology, to ensure the very best possible reception and transmission from all devices. Most importantly it is also fail safe, so should the unit ever stop working or lose power, it will not affect the main VHF operation. Until now, Digital Yacht, have recommended a dedicated antenna for a receiver or transponder.However, with the new this new ZeroLoss TM technology, we can now offer a solution that greatly simplifies installation whilst maintaining performance.\u003c\/p\u003e\u003cp\u003eThe unit is waterproof and matches the aesthetics of the current AIT1500, so can easily be integrated into any vessel. It is suitable for operation on 12V or 24V systems and features three status LEDs that show the unit is powered correctly and when the AIS or VHF transmits.\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385150722210,"sku":"DIYZDIGSPL1500","price":429.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGSPL1500.jpg?v=1765303097"},{"product_id":"digital-yacht-spl2000-splitter-vhf-ais-from-one-antenna-with-fm","title":"Digital Yacht SPL2000 Splitter VHF-AIS from One Antenna with FM MPN - ZDIGSPL2000","description":"\u003cp\u003e\u003cb\u003eDigital Yacht DIGSPL2000 AIS\/VHF\/FM Antenna Splitter\u003c\/b\u003e\u003c\/p\u003eModel: DIGSPL2000\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eEnables an existing VHF antenna to be used for both the standard VHF and AIS system\u003c\/li\u003e\n\u003cli\u003ePatented ZeroLossTM technology for exceptional performance\u003c\/li\u003e\n\u003cli\u003eWorks with all Class B transponders and receivers\u003c\/li\u003e\n\u003cli\u003eSupplied with power cable, PL259-PL259 cable assembly and BNC-BNC cable assembly for easy installation (all cables 0.75m long)\u003c\/li\u003e\n\u003cli\u003eAM-FM radio antenna connection for standard car stereo radio (integrated in power cable)\u003c\/li\u003e\n\u003cli\u003e12v or 24v 0peration and low power consumption\u003c\/li\u003e\n\u003cli\u003eFail safe operation\u003c\/li\u003e\n\u003cli\u003eSame size and design as the new AIT2000\u003c\/li\u003e\n\u003cli\u003eMakes installation of an AIS receiver or transponder very quick and simple\u003c\/li\u003e\n\u003cli\u003eSaves on additional antenna clutter\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAn AIS receiver or transponder requires a VHF antenna, but Digital Yacht's new SPL2000 AIS-VHF antenna splitter allows an existing antenna to be used for both the AIS and VHF (DSC) and even with an AM\/FM radio. Unlike most simple splitters, it can also be used with a class B transponder system and it incorporates special circuitry to ensure safe operation of the two transmitting devices.\u003c\/p\u003e\u003cp\u003eThe unit has four simple connections - one input for the main VHF antenna and then outputs for the AIS receiver\/transponder, DSC VHF as well as an optional car radio output. It utilises Digital Yacht's new, patented, ZeroLossTM technology, to ensure the very best possible reception and transmission from all devices. Most importantly it is also fail safe, so should the unit ever stop working or lose power, it will not affect the main VHF operation. Until now, Digital Yacht, have recommended a dedicated antenna for a receiver or transponder.However, with the new this new ZeroLoss TM technology, we can now offer a solution that greatly simplifies installation whilst maintaining performance.\u003c\/p\u003e\u003cp\u003eThe unit is waterproof and matches the aesthetics of the current range of transponders and receivers, so can easily be integrated into any vessel. It is suitable for operation on 12V or 24V systems and features three status LEDs that show the unit is powered correctly and when the AIS or VHF transmits.\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385150754978,"sku":"DIYZDIGSPL2000","price":459.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGSPL2000.jpg?v=1765303097"},{"product_id":"digital-yacht-seatalk-to-nmea-converter","title":"Digital Yacht SeaTalk to NMEA Converter MPN - ZDIGSTN","description":"\u003cp\u003e\u003cb\u003eDigital Yacht DIGSTN Data Converter for any Legacy Autohelm or Raymarine System\u003c\/b\u003e\u003c\/p\u003eModel: DIGSTN\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eSmall but powerful bi-directional converter\u003c\/li\u003e\n\u003cli\u003ePowered from the SeaTalk network\u003c\/li\u003e\n\u003cli\u003eFeatures reliable multi-stage transistor SeaTalk interface\u003c\/li\u003e\n\u003cli\u003eOpto-isolated NMEA0183 input and differential NMEA0183 output\u003c\/li\u003e\n\u003cli\u003eCan be configured to operate in \"Raw Data\" mode ($STALK)\u003c\/li\u003e\n\u003cli\u003eConverts all of the key navigational data\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe SeaTalkTM interface, originally developed by Autohelm in the early 1990's, was included on pretty much all Autohelm and Rarmarine (and some Raytheon) products up until about 2012. As a result there are thousands and thousands of boats around the world that have a SeaTalk 1 network and many owners, for one reason or another, need to convert from SeaTalk to NMEA0183.\u003c\/p\u003e\u003cp\u003eRaymarine's own SeaTalk to NMEA converter (E85001) is no longer available, and although some instruments\/MFDs\/autopilots have NMEA0183 interfaces, they do not always convert all of the data or are located in a difficult to wire to location.\u003c\/p\u003e\u003cp\u003eDigital Yacht's SeaTalk to NMEA (ISO) Converter is a small but powerful interface that provides bi-directional conversion between a SeaTalk network and an NMEA0183 network or device. Taking its power from the SeaTalk network, the ST-NMEA Converter features a full, multi-transistor SeaTalk 1 interface, an opto-isolated NMEA0183 input and differential NMEA0183 output that allows key navigational data to be reliably shared between the SeaTalk and NMEA0183 networks.\u003c\/p\u003e\u003cp\u003eFor developers and advanced users that want to access the raw SeaTalk data, the ST-NMEA converter can also be configured to work in a special \"Raw Data\" mode ($STALK) which is gaining support in some Open Source projects.\u003c\/p\u003e\u003cp\u003eThe ST-NMEA (ISO) Converter is ideal for connection to one of Digital Yacht's wireless NMEA servers, allowing SeaTalk owners to go wireless and a USB Version of the ST-NMEA Converter is also available for direct connection to a PC or Mac.\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385151017122,"sku":"DIYZDIGSTN","price":259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGSTN.jpg?v=1765303099"},{"product_id":"digital-yacht-wln10sm-smart-nmea-wifi-adapter-4800-38400-baud","title":"Digital Yacht WLN10SM Smart NMEA-WiFi Adapter 4800\/38400 Baud MPN - ZDIGWLN10SM","description":"\u003cp\u003e\u003cb\u003eDigital yacht DIGWLN10SM Smart NMEA to WiFi gateway\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGWLN10SM\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eNMEA 0183 to WiFi server (4800 baud or 38400 baud)\u003c\/li\u003e\n\u003cli\u003eWeb interface for setup and initial programming\u003c\/li\u003e\n\u003cli\u003eSet baud rate, SSID and password through web interface\u003c\/li\u003e\n\u003cli\u003eSupports both UDP (for multiple connections) and TCP\/IP interfaces\u003c\/li\u003e\n\u003cli\u003eView NMEA data received for easy fault finding of issues.\u003c\/li\u003e\n\u003cli\u003eSupports a bi directional Wi-Fi interface\u003c\/li\u003e\n\u003cli\u003eFully compatible with popular navigation apps and software\u003c\/li\u003e\n\u003cli\u003eEasy to install IPX4 black box solution\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDigital Yacht's new WLN10 Smart NMEA to WiFi gateway takes iPad and tablet integration afloat even further with the ability to connect to existing on board GPS, AIS and instrument systems and transfer data wirelessly to an iPad or tablet - allowing compatible apps to display and compute with real time information. The WLN10 creates a secure, password protected wifi network on board to footprint the boat with data.\u003c\/p\u003e\u003cp\u003eWhen connected to, for example, an AIS system, real time AIS target positions and identity data will be displayed on detailed electronic charting through compatible apps including NavLink, TimeZero, iAIS, iSailor, Seapilot and hundreds more. The tablet becomes a full function navigation display.\u003c\/p\u003e\u003cp\u003eThis new version of the WLN10 can now be programmed through its simple browser interface for NMEA 0183 data at 4800 or 38400 baud and for initial programming: Just logon to the IP address and you can set baud rate, SSID and password. No complicated programming! Through the web interface, you can also view NMEA data received for easy fault finding of issues.\u003c\/p\u003e\u003cp\u003eThe WLN10 Smart supports both UDP (for multiple connections) and TCP\/IP interfaces for maximum compatibility with apps so you can be using a PC at the chart table with an iPad on deck. It's also bidirectional so apps can control an autopilot if this function is enabled.\u003c\/p\u003e\u003cp\u003eThe Smart WLN10 has one NMEA0183 input which can be configured through the web interface. You can also utilise our SeaTalk to NMEA adaptor to allow SeaTalk instrument data to be interfaced directly to the WLN10 Smart. Now works with the popular Navionics Boating App for Apple iOS and Android to display GPS and AIS data on your Navionics charts.\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385151213730,"sku":"DIYZDIGWLN10SM","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGWLN10SM.jpg?v=1765303100"},{"product_id":"digital-yacht-nmea-usb-adaptor","title":"Digital Yacht NMEA-USB Adaptor MPN - ZDIGUSBNMEA","description":"\u003cp\u003e\u003cb\u003eDigital Yacht NMEA to USB Adaptor\u003c\/b\u003e\u003c\/p\u003eModel: DIGUSBNMEA\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eConverts NMEA0183 into USB so that your computer can read the data\u003c\/li\u003e\n\u003cli\u003eBidirectional data conversion\u003c\/li\u003e\n\u003cli\u003eUse with our GPS150 for PC integration\u003c\/li\u003e\n\u003cli\u003eLow cost simple solution\u003c\/li\u003e\n\u003cli\u003eMore than one adaptor can be fitted to the computer\u003c\/li\u003e\n\u003cli\u003e4800, 9600, 38400 and 115200 baud compatible\u003c\/li\u003e\n\u003cli\u003eBuilt-in indicator lights flash to show data is being received and transmitted\u003c\/li\u003e\n\u003cli\u003eEasy plug and play connection to most computers\u003c\/li\u003e\n\u003cli\u003eComes with a driver CD and a free copy of SmarterTrack Lite AIS software\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe NMEA to USB Adaptor works on PCs, Macs and Linux computers, and converts NMEA 0183 data, used by many marine systems, into a USB format that can be plugged into most modern computers. The adaptor is a bi-directional device so data can be sent to and from systems and supports traditional 4800 baud data or the higher speed 38400 baud rate used by AIS systems. LEDs show data being received and transmitted which helps with interfacing issues and all the electronics are encapsulated into the connector.\u003c\/p\u003e\u003cp\u003eThe device creates a virtual COM port on the PC which navigation and charting software can use to read NMEA data. Multiple adaptors can be connected if necessary which effectively allow any number of NMEA ports to be created on your PC. The device ships with a multi platform driver CD so it can be used on PCs, MACs and even Linux based systems. If you're using the device with an AIS, you'll get a bonus as SmarterTrack Lite AIS viewing software is included on the CD - effectively turning your PC into an AIS target display.\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385157341346,"sku":"DIYZDIGUSBNMEA","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGUSBNMEA.jpg?v=1765303142"},{"product_id":"digital-yacht-navdoctor-nmea2000-dianostic-monitor","title":"Digital Yacht NAVDOCTOR NMEA2000 Dianostic Monitor MPN - ZDIGNAVDOC","description":"\u003cp\u003e\u003cb\u003eDigital Yacht NavDoctor NMEA2000 Diagnostic tool\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGNAVDOC\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eNMEA 2000 Diagnostic Tool\u003c\/li\u003e\n\u003cli\u003eSelf powered from NMEA 2000 bus - fits in seconds\u003c\/li\u003e\n\u003cli\u003eCreates its own wireless network on the boat or can join an existing network in the workshop\u003c\/li\u003e\n\u003cli\u003eNo apps required, NAVDoctor's simple web interface displays in your browser\u003c\/li\u003e\n\u003cli\u003eLists all devices on the NMEA network and all PGNs being transmitted\u003c\/li\u003e\n\u003cli\u003eHealth page gives you an immediate snapshot of the networks key performance parameters\u003c\/li\u003e\n\u003cli\u003eCan log all data to text file for in-depth analysis\u003c\/li\u003e\n\u003cli\u003eGenerates a Network Health Report that you can either print or save to PDF\u003c\/li\u003e\n\u003cli\u003eYou can give a health report to the customer or you can retain for your own installation records\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\"NAVDoctor is the perfect NMEA 2000 diagnostic tool for dealers, installers and boat builders. It turns any mobile device in to an NMEA 2000 network analyser, creating simple and clear web pages that show the health and status of your NMEA 2000 network.\"\u003c\/p\u003e\u003cp\u003eNAVDoctor is a portable NMEA 2000 network diagnostic tool\/tester. It allows you to quickly check and diagnose the NMEA 2000 network. It combines the functionality of existing NMEA 2000 display programs and test equipment into a single, cost effective, simple plug 'n play box.\u003c\/p\u003e\u003cp\u003eIt's self powered from the network and creates a local wifi point for a mobile phone, tablet or PC to connect. Once connected, you simply access functions through a web browser so there's no complicated software to install.\u003c\/p\u003e\u003cp\u003eNMEA 2000 networks are based on a robust Canbus architecture, but one bad device, cable or termination can have a detrimental effect on performance. Fault finding can be time consuming and tricky, so having a NAVDoctor in your toolkit, will save you time, money and frustration.\u003c\/p\u003e\u003cp\u003eNAVDoctor is an essential tool for every marine electronics technician or installer and also offers the capability of printing a network health check certificate to validate an installation and improve customer service.\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385187815586,"sku":"DIYZDIGNAVDOC","price":499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGNAVDOC.jpg?v=1765303541"},{"product_id":"digital-yacht-ikonvert-nmea-2000-0183-gateway-converter","title":"Digital Yacht iKonvert - NMEA2000 to NMEA0183 Converter (ISO) MPN - ZDIGIKVT","description":"\u003cp\u003e\u003cb\u003eDigital Yacht iKonvert - NMEA2000 to NMEA0183 Converter (ISO)\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGIKVT\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eSmall but powerful bi-directional NMEA0183 to NMEA2000 Converter\u003c\/li\u003e\n\u003cli\u003ePowered from the NMEA2000 network\u003c\/li\u003e\n\u003cli\u003eOpto Isolated NMEA0183 Interface\u003c\/li\u003e\n\u003cli\u003eConverts AIS, GPS, Navigation, Instrument and XDR data\u003c\/li\u003e\n\u003cli\u003eFeatures \"Real Life\" data modes for most common installations\u003c\/li\u003e\n\u003cli\u003eSimple configuration of data modes using DIP switches\u003c\/li\u003e\n\u003cli\u003eIntegral NMEA0183 cable and NMEA2000 Micro (Male) cables\u003c\/li\u003e\n\u003cli\u003eFull galvanic isolation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe iKonvert NMEA0183 to NMEA2000 Converter\/Gateway is an intelligent and flexible gateway. Therefore allowing for new NMEA2000 equipment to talk to legacy NMEA0183 equipment. Conversions are bi-directional. For example, you may want to get the data from older NMEA0183 sensors on to your NMEA2000 network. Another reason being you have a new NMEA2000 only MFD and want GPS and Navigation data sent to your older NMEA0183 VHF and Autopilot. iKonvert can be used to accurately and intelligently carry out the required data conversions.\u003c\/p\u003e\u003cp\u003eReal life applications could include connecting together a number of different makes and models of equipment plus many more. iKonvert has been designed to satisfy as many of these situations as possible. As a result, we have built in a simple but effective mode selection method, via a set of DIP switches inside iKonvert. Just remove two screws, open the iKonvert box and select the mode you need with a small screwdriver. The next time iKonvert powers up, it will automatically carry out the conversions you selected.\u003c\/p\u003e\u003cp\u003eA number of modes already defined include; Heading, Sounder, AIS, GPS, Wind, Instruments and an all data gateway mode. This automatically sets the conversions to be done and the baud rate iKonvert will use. Furthermore, if you need a mode that we have not defined yet, just let us know and we will consider including it.\u003c\/p\u003e\u003cp\u003eThe iKonvert Gateway is compact and its housing is easy to mount. It features an integral NMEA0183 cable and standard NMEA2000 Micro drop cable (male). In addition, it takes its power from the NMEA2000 network. It also provides full galvanic isolation between the NMEA0183 and NMEA2000 networks. Hence, iKonvert is the perfect solution for all NMEA conversions.\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385194729634,"sku":"DIYZDIGIKVT","price":259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGIKVT.jpg?v=1765303673"},{"product_id":"digital-yacht-4g-connect-2g-3g-4g-internet-access-gateway-with-dual-antennas","title":"Digital Yacht 4G Connect 2G\/3G\/4G Internet Access Gateway with Dual Antennas MPN - ZDIG4GCPRO","description":"\u003cp\u003e\u003cb\u003eDigital Yacht 4G Connect Pro 2G\/3G\/4G (LTE) internet access solution\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e ZDIG4GC-PRO\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHi performance 4G\/LTE modem for exceptional speed and range with fall back to 2G\/3G\u003c\/li\u003e\n\u003cli\u003eSIM unlocked for AT\u0026amp;T and T-Mobile\u003c\/li\u003e\n\u003cli\u003eLTE Class 3 modem offers long range and up to 70Mbps speeds\u003c\/li\u003e\n\u003cli\u003eRecommended solution for offshore use and non GRP vessels\u003c\/li\u003e\n\u003cli\u003eWifi interface for tablets and phones\u003c\/li\u003e\n\u003cli\u003eEthernet LAN port for connection to iKommunicate navigation interface - allows boat NMEA 0183\/2000 data to be available on the wifi network - ideal for smartphone and tablet navigation\u003c\/li\u003e\n\u003cli\u003eEthernet WAN port can connect to satellite or WL510 high power wifi system for combination LTE\/WiFi hotspot solution\u003c\/li\u003e\n\u003cli\u003e12V DC operation with \u0026lt;5W power consumption\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eWhat's in the Box:\u003c\/b\u003e\u003cul\u003e\n\u003cli\u003eLTE Class 3 modem\u003c\/li\u003e\n\u003cli\u003eSIM unlocked for AT\u0026amp;T and T-Mobile\u003c\/li\u003e\n\u003cli\u003e2 x high performance external 48cm antennas\u003c\/li\u003e\n\u003cli\u003e23 ft (7m) low loss LMR 200 cable kit included\u003c\/li\u003e\n\u003cli\u003e2 x deck base for antennas\u003c\/li\u003e\n\u003cli\u003einternal Wi-Fi antenna\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385235951778,"sku":"DIYZDIG4GCPRO","price":939.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIG4GCPRO.jpg?v=1765304424"},{"product_id":"digital-yacht-nmea2000-starter-kit","title":"Digital Yacht NMEA2000 Starter Kit MPN - ZDIGN2KIT","description":"\u003cp\u003e\u003cb\u003eDigital yacht NMEA2000 Starter Kit\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGN2KIT\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eNMEA2000 starter kit - Everything you need in one box\u003c\/li\u003e\n\u003cli\u003eMetal connectors and reduced T-Piece connections, improve reliability\u003c\/li\u003e\n\u003cli\u003eStandard \"Micro C\" connectors make it very easy for future network expansion\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNMEA2000 has now become the de-facto standard throughout the marine electronics industry for interconnection of devices. It uses a simple backbone (or sometimes called \"trunk\") structure with requires terminators at each end of the cabling and then each device can be spurred off using a drop cable. The bus also requires power. Furthermore, waterproof connectors are used throughout for maximum reliability and it makes for an easy plug 'n play installation. Therefore Digital Yacht introduced the NMEA2000 cable starter kit.\u003c\/p\u003e\u003cp\u003eDigital Yacht's NMEA2000 cable starter kit allows for up to 3 devices to interconnect - say AIS, plotter and autopilot and comes complete with terminators and a power cable. It uses the high quality, nickel plated metal style connectors rather than the cheaper plastic type which can prove unreliable. The backbone is formed from a unique 6 way extension block with ports at each end that accommodate the terminators. Therefore allowing for a really neat and compact installation - ideal for behind the helm. It's suitable for DIY installers as well as boat builders who want an easy and value priced solution for integrating and installing modern boat electronics.\u003c\/p\u003e\u003cp\u003eThe connection system will work with all leading brands and can be expanded using standard components as required.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eWhat's in the Box:\u003c\/b\u003e\u003cul\u003e\n\u003cli\u003eSmart 4-Way T-Piece \"Backbone\"\u003c\/li\u003e\n\u003cli\u003e1m (3ft) Power Cable with in-line fuse\u003c\/li\u003e\n\u003cli\u003e1m (3ft) \"Drop Cable\"\u003c\/li\u003e\n\u003cli\u003ePair of removable network terminators\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385274093730,"sku":"DIYZDIGN2KIT","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGN2KIT.jpg?v=1765305146"},{"product_id":"digital-yacht-enginelink-nmea-2000-wifi-gateway","title":"Digital Yacht ENGINELINK NMEA 2000 - WiFi Gateway MPN - ZDIGELINK","description":"\u003cp\u003e\u003cb\u003eDigital Yacht ENGINELINK Wireless Engine Interface\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGELINK\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eWireless gateway for NMEA 2000 networks with integrated engine instrument displays\u003c\/li\u003e\n\u003cli\u003eCompatible with engines\/outboards with NMEA 2000 capability\u003c\/li\u003e\n\u003cli\u003eSecure, password protected wifi network or connect to existing boat wifi network\u003c\/li\u003e\n\u003cli\u003eDisplays for popular parameters like RPM, battery voltage, temperature, pressure, fuel,etc\u003c\/li\u003e\n\u003cli\u003eDedicated electric engine display page\u003c\/li\u003e\n\u003cli\u003eSupport for single or dual engines\u003c\/li\u003e\n\u003cli\u003eSimply connect to backbone and connect iPad, smart phone, tablet, PC or MAC via wifi - any device with a browser can display the instrument dash!\u003c\/li\u003e\n\u003cli\u003eStreams real time AIS and GPS data to other apps such as Navionics too for precision boat GPS data and AIS overlay\u003c\/li\u003e\n\u003cli\u003eDisplays data from NMEA 2000 compatible Trim Tabs and Jack Plates\u003c\/li\u003e\n\u003cli\u003eEasily updateable as engines offer more parameters\u003c\/li\u003e\n\u003cli\u003eLogging capability for diagnostics\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eENGINELink is a new NMEA 2000 wireless gateway that allows mobile phones and tablets to display engine data (utilising a NMEA 2000 interface) as well as providing a feed of AIS and GPS data to popular apps like Navionics, NavLink, iNavX, SavyNavy, AquaMaps and more. Now boaters can have engine data plus their favourite charting app displays on their connected devices.\u003c\/p\u003e\u003cp\u003eEngine information such as RPM, temperature, pressure and battery voltage are displayed as an attractive dashboard display through the web browser on the mobile device so there's no need for a custom app. iOS and Android devices can display app data and a web browser page side by side so you can have your favourite charting app open alongside engine instrument displays.\u003c\/p\u003e\u003cp\u003eSetup and installation is easy. Just \"T\" into the NMEA 2000 backbone and ENGINELink is self powered from the network. It creates a secure, password protected local wifi network with up to 7 devices able to connect simultaneously. UDP and TCP\/IP protocols are supported too for compatibility with 3rd party apps.\u003c\/p\u003e\u003cp\u003eMost modern outboards and engines have an NMEA 2000 interface or the ability to add as an accessory and ENGINELink has preset dashboards for popular manufacturers including Honda, Suzuki, Tohatsu, Mercury, Yamaha, Yanmar and Volvo. In addition, ENGINELink has a dashboard for the new generation of electric engines, that displays current consumption and battery capacity.\u003c\/p\u003e\u003cp\u003eEither single or dual engine installations are currently supported and ENGINELink will work with any \"NMEA 2000 ready\" engine. If the vessel is fitted with NMEA 2000 compatible Trim Tabs or Jack Plates, then the status of these performance critical accessories are also displayed on the dashboard.\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385284874402,"sku":"DIYZDIGELINK","price":309.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGELINK.jpg?v=1765305260"},{"product_id":"digital-yacht-gv30-vhf-ais-gps-antenna","title":"Digital Yacht GV30 VHF\/AIS GPS Antenna with 2 x 10m Cables MPN - ZDIGGV30","description":"\u003cp\u003e\u003cb\u003eDigital Yacht GV30 VHF\/AIS GPS Antenna with 2 x 10m Cables\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGGV30\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eCombination AIS\/VHF and GPS antenna\u003c\/li\u003e\n\u003cli\u003eSpecifically tuned to 162MHz\u003c\/li\u003e\n\u003cli\u003eHigh gain GPS element\u003c\/li\u003e\n\u003cli\u003eSupplied with 2 x 10m cable tails fitted with mini connectors for easy cable installation\u003c\/li\u003e\n\u003cli\u003eStandard 1 in threaded base for compatibility with a variety of mounts available here\u003c\/li\u003e\n\u003cli\u003eSupplied with TNC (GPS) and BNC (AIS) adaptors\u003c\/li\u003e\n\u003cli\u003eUnder 8 inches high for low profile installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA Class B AIS transponder requires a dedicated GPS antenna (all Class B units must have their own internal GPS and can't use an external feed for regulatory purposes) as well as a VHF antenna or suitable VHF-AIS antenna splitter. The GV30 is a combination VHF\/AIS and GPS antenna with twin coax feeds (33ft).\u003c\/p\u003e\u003cp\u003eIt's fitted with a standard 1 in threaded base so will mount onto a variety of deck, pole and rail attachments sold separately. The 33ft coax cables are terminated with a FME mini connector which makes running the cable easy as the connector is barely bigger than the 5mm cable. We then supply suitable adaptors for the TNC and BNC connectors on our AIT2000. The GV30 is just 7 inches high and 3 inches in diameter.\u003c\/p\u003e\u003cp\u003eDespite its compact dimensions, it offers very good performance as its specifically tuned to 162MHz (AIS frequency). The GV30 is also available with the AIT2000 as a bundle.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eWhat's in the Box:\u003c\/b\u003e\u003cul\u003e\n\u003cli\u003eGV30 Antenna\u003c\/li\u003e\n\u003cli\u003e2 x 10m Cable with FME Connectors\u003c\/li\u003e\n\u003cli\u003eTNC Adaptor\u003c\/li\u003e\n\u003cli\u003eBNC Adaptor\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385285005474,"sku":"DIYZDIGGV30","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGGV30.jpg?v=1765305263"},{"product_id":"digital-yacht-iseasense-bm100-battery-monitoring-system","title":"Digital Yacht BM100 battery Monitoring System for NMEA2000 Systems MPN - ZDIGISSBM100","description":"\u003cp\u003e\u003cb\u003eDigital Yacht BM100 battery Monitoring System for NMEA2000 Systems\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGISSBM100\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eBluetooth interface for setup and detailed analysis including charge\/discharge cycles, state of charge, remaining capacity and historical data\u003c\/li\u003e\n\u003cli\u003eUse your phone\/tablet and your NMEA 2000 devices for battery monitoring and management\u003c\/li\u003e\n\u003cli\u003e500A SmartShunt included for main battery system\u003c\/li\u003e\n\u003cli\u003eMonitor voltage of a separate (eg starter) battery\u003c\/li\u003e\n\u003cli\u003eUniversal NMEA 2000 gateway for Victron's popular range of smart battery monitors\/SmartShunt using VE.Direct interface (see compatibility list in the FAQ tab)\u003c\/li\u003e\n\u003cli\u003eEnables electrical and battery monitoring and management on compatible multi functions displays (Raymarine, Garmin, Navico, Furuno etc)\u003c\/li\u003e\n\u003cli\u003eProvides battery voltage and charge\/discharge current, state of charge and time to depletion based on sophisticated algorithm\u003c\/li\u003e\n\u003cli\u003eEasy installation, plug 'n play connectivity and self-powered from the NMEA 2000 bus\u003c\/li\u003e\n\u003cli\u003eSupports alerts generated by the SmartShunt\u003c\/li\u003e\n\u003cli\u003eSupports multiple SmartShunts for multi battery systems\u003c\/li\u003e\n\u003cli\u003eAlso compatible with other VE.Direct products such as solar MPPT controllers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe BM100 is a complete system comprising SmartShunt and veKonvert NMEA 2000 interface. It is part of Digital Yacht's iSeaSense range of NMEA 2000 boat instruments. With this solution, your multi function display becomes a sophisticated battery and energy management system.\u003c\/p\u003e\u003cp\u003eDigital Yacht's new BM100 battery monitoring system allows highly accurate DC voltage, current and capacity measurements enabling reliable monitoring of your boat's battery and electrical system.\u003c\/p\u003e\u003cp\u003eCore to the system is the SmartShunt. It measures battery voltage and current. Based on these measurements, it intelligently calculates the battery's state of charge and the time to depletion for the remaining charge. It also keeps track of historical data, such as deepest discharge and average discharge current as well as the number of charge and discharge cycles. The smart shunt can also monitor the voltage of a 2nd battery - typically dedicated to engine starting.\u003c\/p\u003e\u003cp\u003eThe system features a NMEA 2000 interface so your navigation multi-function display or plotter can display all key parameters. Modern MFDs from leading manufacturers such as Garmin, Raymarine, Furuno and Navico allow electrical battery data to be displayed via their NMEA 2000 interface. Alarms and alerts for low capacity and voltage can also be enabled.\u003c\/p\u003e\u003cp\u003eThe BM100 also has a standalone wireless Bluetooth interface so your mobile phone or iPad can connect and display current, voltage, capacity, additional historical data, state of charge information and time to go based on remaining battery capacity.\u003c\/p\u003e\u003cp\u003eThe product is a collaboration between Victron Energy and Digital Yacht. The system utilises Victron's proprietary VE.Direct data connectivity as a source for the NMEA 2000 data.\u003c\/p\u003e\u003cp\u003eThe BM100 is part of a wider group of products now introduced by Digital Yacht which bring NMEA 2000 connectivity to Victron systems using the VE.Direct interface.\u003c\/p\u003e\u003cp\u003eVictron solar panel controllers (MPPTs) and battery monitors can now also interconnect to NMEA 2000 via the veKonvert interface.\u003c\/p\u003e\u003cp\u003eWe're increasingly reliant on DC battery electrical power while afloat for lighting, refrigeration, pumps, winches etc so having accurate battery information and monitoring charge from various sources is essential. The service life of batteries depends on many factors. Battery life may be shortened by under-charging, over-charging, excessively deep discharges, excessive charge or discharge currents, and by high ambient temperature.\u003c\/p\u003e\u003cp\u003eMonitoring the battery with the BM100 will give important feedback to the user so that remedial measures can be taken when necessary. Doing this will extend battery life. There's also an optional battery temperature sensor available.\u003c\/p\u003e\u003cp\u003eThe BM100 can also integrate with Digital Yacht's other NMEA 2000 and wireless instruments which offer a hybrid NMEA 2000 and wireless display options.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eWhat's in the Box:\u003c\/b\u003e\u003cul\u003e\n\u003cli\u003eveKonvert interface\u003c\/li\u003e\n\u003cli\u003e500A Victron Shunt\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385351164066,"sku":"DIYZDIGISSBM100","price":439.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGISSBM100.jpg?v=1765306244"},{"product_id":"digital-yacht-net-protect-nmea2000-network-guard-and-ids","title":"Digital Yacht NET Protect NMEA2000 Network Guard and IDS MPN - ZDIGN2KPROT","description":"\u003cp\u003e\u003cb\u003eDigital Yacht Net Protect - Cyber Security System\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGN2KPROT\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eWorld's first NMEA 2000 Cyber Security Device\u003c\/li\u003e\n\u003cli\u003eTests \u0026amp; validates the NMEA 2000 network during installation\u003c\/li\u003e\n\u003cli\u003eAllows configuration of other NMEA 2000 devices\u003c\/li\u003e\n\u003cli\u003eView and analyse the NMEA 2000 network with device and PGN displays plus raw data logging\u003c\/li\u003e\n\u003cli\u003e24\/7 monitoring of the NMEA 2000 network\u003c\/li\u003e\n\u003cli\u003eIntegrated WiFi antenna can create its own WiFi network or join vessel's wireless network\u003c\/li\u003e\n\u003cli\u003eConfiguration and monitoring via built-in web interface\u003c\/li\u003e\n\u003cli\u003e92dB internal buzzer for alerts\u003c\/li\u003e\n\u003cli\u003eAbility to generate SMS alert messages when used with a Digital Yacht 4GX or 5GX product for remote alerts\u003c\/li\u003e\n\u003cli\u003eSelf-contained, bus powered, unobtrusive IP54 rated black box\u003c\/li\u003e\n\u003cli\u003eFuture proof design, with easy to update firmware via web interface to keep unit aligned with current threats\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWith more technically advanced, integrated and \"connected\" boats, security becomes a major concern. Recent high profile automotive hacks have highlighted security weaknesses in some CAN based systems.\u003c\/p\u003e\u003cp\u003eThe NMEA Organisation have responded to this threat by establishing a Cyber Security Working Group to identify and mitigate the risks of maritime attacks\u003c\/p\u003e\u003cp\u003eNET Protect is the World's first cyber security product, focused on NMEA 2000, to be developed as part of this NMEA initiative.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eWhat's in the Box:\u003c\/b\u003e\u003cul\u003e\n\u003cli\u003eNET Protect With Integrated 0.8m Nmea 2000 Drop Cable\u003c\/li\u003e\n\u003cli\u003eInstructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385358110882,"sku":"DIYZDIGN2KPROT","price":389.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGN2KPROT.jpg?v=1765306383"},{"product_id":"digital-yacht-gps160-trinav-gps-glonass-galileo-sensor-furuno-output","title":"Digital Yacht GPS160 TriNav GPS. Glonass, Galileo Sensor Furuno Output MPN - ZDIGGPS160F","description":"\u003cp\u003e\u003cb\u003eDigital Yacht GPS160F with Furuno Data Output\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e ZDIGGPS160F\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGPS160 for legacy Furuno systems\u003c\/li\u003e\n\u003cli\u003eRefined anti-spoofing algorithm for robust performance of position and interference rejection\u003c\/li\u003e\n\u003cli\u003eMany formats of NMEA data output including datum information -user can configure through internal DIP switches\u003c\/li\u003e\n\u003cli\u003eUltra low (\u0026lt;20mA) power consumption at 12V DC\u003c\/li\u003e\n\u003cli\u003e10m cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe GPS160 series of sensors is a high performance GPS designed for use with chart plotters\u003c\/p\u003e\u003cp\u003eDigital Yacht have introduced a specific version of the GPS160 which is a simple replacement for older Furuno plotter and GPS systems. Devices like the Furuno GP32, Navnet and GPS310\/320 utilise a specific format for GPS data and this new sensor emulates that for easy compatibility. Some of these older GPS sensors have suffered from technical issues with the GPS system roll over changes which can render chart plotter systems useless. The GPS160F provides an economical and reliable solution to these problems. Please note that it cannot be connected to a GP32 display, but it can replace the GP32, outputting the same data to other Furuno devices that the GP32 provided.\u003c\/p\u003e\u003cp\u003eIn conjunction with Furuno UK, Digital Yacht have developed a special version of their popular GPS160 Smart GNSS Sensor \"QuadNav\"that outputs the older NMEA 0183 sentences and data format that the legacy Furuno systems can read. Now if a Furuno customer has a problem with their existing Furuno GPS (GP310\/GP320\/GP32\/etc.) they can use the new GPS160F as a simple \"drop-in\" replacement for their failed positioning sensor.\u003c\/p\u003e\u003cp\u003eThe new GPS160F has been tested with a wide variety of legacy Furuno products including; the original NavNet MFDs, NavNet VX2,M1735 Radar, GP7000 and the FCV family of sounders.\u003c\/p\u003e\u003cp\u003eSupplied with a 10m cable and new user manual with dedicated Furuno interfacing information, the GPS160F will work straight out of the box and just requires a simple 4 wire connection to the existing Furuno system.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eWhat's in the Box:\u003c\/b\u003e\u003cul\u003e\n\u003cli\u003eGPS160 f\u003c\/li\u003e\n\u003cli\u003e10M Cable\u003c\/li\u003e\n\u003cli\u003emanual\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385358241954,"sku":"DIYZDIGGPS160F","price":329.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGGPS160F.jpg?v=1765306386"},{"product_id":"digital-yacht-ve-konvert-victron-ve-to-nmea2000-gateway","title":"Digital Yacht VE-KONVERT Victron VE to NMEA2000 Gateway MPN - ZDIGVEKVT","description":"\u003cp\u003e\u003cb\u003eDigital yacht Victron VE.Direct to NMEA 2000 Gateway\u003c\/b\u003e\u003c\/p\u003eModel: ZDIGVEKVT\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eUniversal NMEA 2000 gateway for Victron products with a VE.Direct interface\u003c\/li\u003e\n\u003cli\u003eEnables battery management or solar charge monitoring on compatible Multi Function Displays (Raymarine, Garmin, Navico, Furuno etc)\u003c\/li\u003e\n\u003cli\u003eProvides battery voltage, charge\/discharge current, state of charge and time to depletion based on sophisticated algorithm\u003c\/li\u003e\n\u003cli\u003eEasy installation, plug 'n' play connectivity and self-powered from the NMEA 2000 bus\u003c\/li\u003e\n\u003cli\u003eGenerates NMEA 2000 Alerts, from any BMV or SmartShunt Alarms\u003c\/li\u003e\n\u003cli\u003eSupports multiple SmartShunts for larger multi battery systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eveKonvert is a new stand alone NMEA 2000 interface designed in conjunction with Victron Energy to integrate VE.Direct compatible devices such as their SmartShunt, BMV Battery Monitors and MPPT Solar Charge Controller range into NMEA 2000 systems.\u003c\/p\u003e\u003cp\u003eThis functionality already existed but required the use of a sophisticated Cerbo module. veKonvert is a lower cost, simpler solution for smaller installations that just need the electrical data displayed on a Multi Function Displays (MFD).\u003c\/p\u003e\u003cp\u003eNOTE - veKonvert is not compatible with Victron Chargers and Inverters. It should also not be plugged in to the VE.Direct interfaces of any Victron \"Consumers\" such as Multiplus, Quattro, Cerbo, etc.\u003c\/p\u003e\u003cp\u003eInstallation is simple - just \"T\" into the NMEA 2000 backbone and plug into the VE.Direct custom connector on the SmartShunt and you've battery and electrical data on your NMEA 2000 network!\u003c\/p\u003e\u003cp\u003eBoaters and boat builders like a clear and uncluttered dash or nav area so integrating electrical data into the main navigation display is a popular and cost saving option.\u003c\/p\u003e\u003cp\u003eThe product is a collaboration between Victron Energy and Digital Yacht. The system utilises Victron's proprietary VE.Direct data connectivity as a source for the NMEA 2000 data.\u003c\/p\u003e\u003cp\u003eVictron solar panel controllers (MPPTs) and battery monitors can now also interconnect to NMEA 2000 via the veKonvert interface.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eWhat's in the Box:\u003c\/b\u003e\u003cul\u003e\u003cli\u003eveKonvert\u003c\/li\u003e\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":46385358405794,"sku":"DIYZDIGVEKVT","price":259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGVEKVT.jpg?v=1765306389"},{"product_id":"digital-yacht-ns8-network-switch-8-port","title":"Digital Yacht NS8 Network Switch 8 Port MPN - ZDIGNS8","description":"\u003cp\u003e\u003cstrong\u003eDigital Yacht NS8 Network Switch 8 Port\u003c\/strong\u003e\u003c\/p\u003eModel: ZDIGNS8\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e8 Port Network Switch\u003c\/li\u003e\n\u003cli\u003e12\/24\/48v DC low power operation\u003c\/li\u003e\n\u003cli\u003eDual redundancy power supply design\u003c\/li\u003e\n\u003cli\u003eConnects to router via RJ45 Cat 5\/6 network cable connection\u003c\/li\u003e\n\u003cli\u003eSupports 10\/100\/1000 Ethernet Gigabit base-T\u003c\/li\u003e\n\u003cli\u003eDIN Rail (IEC\/EN 60715 - 35 × 7.5mm) mounting bracket and 100mm rail included\u003c\/li\u003e\n\u003cli\u003eStatus indicators for power and network link status\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDigital Yacht's NS8 Network Switch is a rugged and reliable 8 port 10\/100\/1000 base-T network switch that is ideal for expanding a wired Ethernet network onboard a vessel.\u003c\/p\u003e\u003cp\u003e\nMore and more boats now have a wireless router fitted or utilise devices like our 4G Connect for internet connectivity. For optimum data transfer speed, a wired Ethernet connection still offers the fastest and most reliable network connection onboard a boat and for Streaming TV, VOIP, Security Cameras and other data intensive services we always recommend using a wired connection.\u003c\/p\u003e\u003cp\u003eOur NS8 Network Switch provides a simple and rugged solution to increasing the number of wired Ethernet connections on the vessel. Designed to operate from DC supply, with dual redundancy power supply design, a DIN rail mount and eight RJ45 10\/100\/1000 Ethernet ports, the NS8 allows you to reliably expand your boat's Ethernet network.\u003c\/p\u003e\u003cp\u003eInstallation could not be easier, simply connect one of the NS8's RJ45 sockets to a LAN socket on our 4GConnect or 4GXtream routers, using a normal network cable and wire the NS8 directly to the boat's 12v, 24v or 48v DC supply. Our 4G router will continue to provide IP addresses to any device plugged in to the NS8 (via DHCP) and you can immediately see the status of all the Ethernet connections by the flashing Yellow and Green LEDs on each of the NS8's ports.\u003c\/p\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e9 × 4 × 12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003cbr\u003e\u003cstrong\u003eWhat's in the Box:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eNS8 - Network Switch\u003c\/li\u003e\n\u003cli\u003eMounting bracket\u003c\/li\u003e\n\u003cli\u003e100mm rail\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":47441977802914,"sku":"DIYZDIGNS8","price":219.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGNS8.jpg?v=1784398705"},{"product_id":"digital-yacht-ait6000-nucleus-blass-b-ais-transponder-with-spais-satellite-ais-campatibility","title":"Digital Yacht AIT6000 Nucleus Blass B + AIS Transponder with SPAIS Satellite AIS Campatibility MPN - ZDIGAIT6000","description":"\u003cp\u003e\u003cstrong\u003eDigital Yacht AIT6000 Nucleus Blass B + AIS Transponder with SPAIS Satellite AIS Campatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eModel: ZDIGAIT6000\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eClass B+ AIS transponder with VHF splitter\u003c\/li\u003e\n\u003cli\u003eIntegrated zero-loss VHF antenna splitter\u003c\/li\u003e\n\u003cli\u003eSPAIS enabled with additional messaging for satellite reception of AIS transmissions\u003c\/li\u003e\n\u003cli\u003eSecure, password-protected WiFi interface\u003c\/li\u003e\n\u003cli\u003eUDP and TCP\/IP protocols are supported\u003c\/li\u003e\n\u003cli\u003eWiFi connection for up to 7 devices concurrently\u003c\/li\u003e\n\u003cli\u003eWi-Fi broadcasts AIS data, GPS data and instrument data from NMEA 0183 \u0026amp; NMEA 2000\u003c\/li\u003e\n\u003cli\u003eCompatible with all popular navigation applications for iOS, Android, PC \u0026amp; MAC\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 interface\u003c\/li\u003e\n\u003cli\u003eNMEA 0183 input and 2x outputs for legacy installations\u003c\/li\u003e\n\u003cli\u003eUSB interface for PC and MAC\u003c\/li\u003e\n\u003cli\u003eBuilt-in web interface for configuration and setting up alarms (no internet connection required)\u003c\/li\u003e\n\u003cli\u003eCPA \u0026amp; TCPA target alerts for enhanced collision awareness without a chart plotter\u003c\/li\u003e\n\u003cli\u003eSwitched output for connection to an alarm sounder\u003c\/li\u003e\n\u003cli\u003eCompatible with NMEA 2000 alerts and Digital Yacht NavAlarm\u003c\/li\u003e\n\u003cli\u003eSilencing capability via switch and web interface\u003c\/li\u003e\n\u003cli\u003eUltra-rugged and compact enclosure\u003c\/li\u003e\n\u003cli\u003eSupplied with external GPS antenna (10m cable)\u003c\/li\u003e\n\u003cli\u003eSupplied with patch cable (PL259-PL259) for connection to VHF radio\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe AIT6000 is a Class B+ AIS transponder. It uses Class B+ AIS standards using SOTDMA technology and has a 5W power output for increased range and better long range tracking. SOTDMA technology is also used by AIS Class A transponders so the AIT6000 has the same priority when it comes to reserving a slot ensuring that it is always able to transmit reliably.\u003c\/p\u003e\u003cp\u003eThe transmission update varies depending upon the speed of the vessel wheras a regular Class B device just transmits every 30 seconds when underway.\u003c\/p\u003e\u003cp\u003eOur latest Class B+ technology is now SPAIS enabled with additional messaging for the best satellite reception of AIS transmissions. SPAIS is Digital Yacht’s proprietary and specialist technology that optimises messaging from the transponder to include long range satellite capability.\u003c\/p\u003e\u003cp\u003eThis functionality can be easily enabled from the set up menu and will prioritise your AIS transmissions for satellite reception. This is ideal for offshore and ocean sailors wanting the reassurance of land-based tracking even when more than 20NM from the coast and away from coastal\/terrestrial network stations.\u003c\/p\u003e\u003cp\u003eThe AIT6000 incorporates a patented zero-loss VHF antenna splitter, enabling the main VHF antenna to be shared safely between the AIS transponder, the VHF radio and even a FM\/DAB radio. Thanks to this technology, there is no loss of signal or data, guaranteeing optimum performance for all the equipment connected.\u003c\/p\u003e\u003cp\u003eYou connect the main VHF antenna directly to the AIT6000, which then redistributes the signal to your VHF radio using the coaxial cable supplied.\u003c\/p\u003e\u003cp\u003eIntegrated into AIT6000 is a custom alarm for anchor drift using an algorithm to calculate the optimum drift radius based on depth and the scope of the chain for reliable notifications. There’s also an anti collision alarm based on CPA (closest point of approach) and TCPA (time to closest point of approach) AIS data. These alarms can be monitored through the wireless interface with attractive graphical displays of current status or NMEA 2000 Alerts can be sent to other devices on the network.\u003c\/p\u003e\u003cp\u003eThis allows sailors to receive critical collision-avoidance warnings even when a chartplotter is not in use. All features are accessed directly through a standard web browser, eliminating the need for complex software installation. There is a switched output on the AIT6000 power data cable which allows the alarm to attach to a sounder.\u003c\/p\u003e\u003cp\u003eAIT6000 has also been designed to become an onboard hub for navigation. It features an NMEA 0183 interfaces for older, legacy chart plotters as well as NMEA 2000 for modern navigation systems. It also has PC and MAC connectivity via USB. The Nucleus really becomes the heart of your onboard electronic system.\u003c\/p\u003e\u003cp\u003eAIT6000 sends AIS target data to any MFD\/chartplotter with an NMEA 0183 or 2000 interface and it can also transmit the GPS position to a VHF DSC radio.\u003c\/p\u003e\u003cp\u003eAIT6000 creates a secure, password-protected local Wi-Fi network on board your boat. This Wi-Fi network enables AIS, GPS, NMEA 0183 and NMEA 2000 instrument data to be transmitted to navigation software for PC, Mac and Linux, as well as popular iOS and Android applications such as Navionics, TZ iBoat, Savvy Navvy, AquaMap, Navimetrix, OpenCPN, Timezero — plus many others.\u003c\/p\u003e\u003cp\u003eCompatible with all navigation software and applications, AIT6000 displays AIS targets directly on charts in real time. Up to 7 devices can connect simultaneously to its Wi-Fi network. It can also join another Wi-Fi network on board\u003c\/p\u003e\u003cp\u003eAIT6000 adds a lot of interfacing capability through this wireless interface with not just AIS and GPS data from the transponder being available for the navigation apps \u0026amp; software but also boat instrument data from the NMEA 2000 network — such as depth, heading, speed and wind information.\u003c\/p\u003e\u003cp\u003eAIT6000 Wi-Fi is birectional, so not only it allows AIS, GPS and NMEA 0183 and NMEA 2000 instruments data to be transmitted, but also, to send data from navigation applications or software to other marine equipment, such as navigation data to the autopilot.\u003c\/p\u003e\u003cp\u003eThis effectively turns the mobile device, tablet or PC into a powerful multi-function display rivalling any premium MFD and with multi chart format capability through different apps.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eWhat's in the Box:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAIT6000 transceiver\u003c\/li\u003e\n\u003cli\u003eGPS Antenna and 10m cable\u003c\/li\u003e\n\u003cli\u003e3dBi WiFi Antenna\u003c\/li\u003e\n\u003cli\u003ePL259 patch cable for VHF\u003c\/li\u003e\n\u003cli\u003e0.8m NMEA 2000 drop cable (male)\u003c\/li\u003e\n\u003cli\u003e0.8m NMEA 0183 \u0026amp; Power cable\u003c\/li\u003e\n\u003cli\u003e0.8m USB cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":47441989861538,"sku":"DIYZDIGAIT6000","price":1429.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/DIYZDIGAIT6000_001.jpg?v=1784398856"}],"url":"https:\/\/marinerswarehouse.com\/collections\/digital-yacht-marine-navigation-and-network-gear.oembed","provider":"Mariners Warehouse Shop","version":"1.0","type":"link"}