{"title":"Automotive \u0026 RV Electrical \u0026 Power Accessories","description":"\u003cp\u003e\u003cstrong\u003eExplore RV Electrical Accessories \u0026amp; Power Connections\u003c\/strong\u003e at Mariners Warehouse to find practical solutions for your recreational vehicle’s electrical setup. From RV shore power cordsets and electrical adapters to plugs, connectors, and other power accessories, this collection brings together components designed to help you connect your RV to a compatible power source.\u003c\/p\u003e\n\u003cp\u003eWhether you’re preparing for your next camping trip, replacing a worn connection, or organizing your RV electrical essentials, choose accessories based on your vehicle’s inlet, amperage rating, connector type, and power requirements. Always verify product specifications and compatibility before purchasing, and use electrical equipment according to the manufacturer’s instructions for a dependable setup on the road or at the campsite.\u003c\/p\u003e","products":[{"product_id":"attwood-marine-automotive-battery-charger-51005","title":"Attwood Marine \u0026 Automotive Battery Charger MPN - 11901-4","description":"\u003cb\u003eBattery Charger\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eAttwood's Battery Charger is compact and perfect for your bench, garage or shop use.  Overcharge, short circuit and reverse polarity protection provides years of worry free use.  Provides 2 and 6 amp charge for 12V batteries.  6 amp charge for 6V batteries.  Automatically switches to trickle charge mode after battery is fully charged.  Dual rated 12 and 6 volt battery charger can be used for all of your marine, automotive, RV and sports applications. \u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eLED indicator - power on\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAmmeter indicates charging current\t\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e6 foot power cord length\t\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e48 inch battery connector leads\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":46385839702178,"sku":"51005","price":65.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/51005XL.jpg?v=1765314144"},{"product_id":"attwood-battery-maintenance-charger-52331","title":"Attwood Battery Maintenance Charger MPN - 11900-4","description":"\u003cp\u003eThe Attwood Battery Maintenance Charger, MPN 11900-4, keeps a single 12 V battery charged while a boat, RV or vehicle is stored. Our store listing describes it as a fully automatic charger that delivers a 1.5 A maintenance charge, so it is meant for keeping a battery topped up rather than recharging a deeply discharged one quickly.\u003c\/p\u003e\u003cp\u003eThe listing describes it as water resistant, with LED status indicators and protection against short circuits and reverse polarity. Our catalog data lists a 120 V AC input and a single charging bank.\u003c\/p\u003e\u003cp\u003eAttwood's own product page could not be reached when this content was prepared, so charging stages, battery types, connection method and warranty are not listed here. Contact us if you need those details before ordering.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":46385869455522,"sku":"52331","price":46.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/52331XL.jpg?v=1765314701"},{"product_id":"samlex-100a-inverter-installation-kit-f-1000w-inverter-67213","title":"Samlex 100A Inverter Installation Kit for 1000W Inverter MPN - DC-1000-KIT","description":"\u003cp\u003eThe Samlex DC-1000-KIT is a DC installation kit that connects an inverter to its battery bank. It contains two 10 ft AWG #4 flexible copper cables, one red and one black, with crimped ring lugs for 3\/8 in studs, plus an MRBF-100 100 A marine rated battery fuse assembly and the hardware to secure the cable run.\u003c\/p\u003e\u003cp\u003eSamlex sizes the kit by inverter power. It recommends the DC-1000-KIT for inverters of 600–800 W at 12 V, based on a 10 ft cable run with up to 3% voltage drop and DC current equal to the fuse rating. The cables are rated 600 V and −50 to 105 °C with an EPR jacket. The MRBF fuse mounts directly on the battery terminal, is ignition protected to SAE J1171 and is rated IP66.\u003c\/p\u003e\u003cp\u003eCheck that your inverter's DC terminals accept 3\/8 in ring lugs before ordering. Samlex notes that some inverters need pin-type lugs, so the supplied lugs may need to be changed. Compare the DC-2000-KIT (200 A) if your inverter falls in a different size range.\u003c\/p\u003e","brand":"Samlex America","offers":[{"title":"Default Title","offer_id":46386284789922,"sku":"67213","price":224.1,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/67213XL.jpg?v=1765321049"},{"product_id":"samlex-200a-inverter-installation-kit-f-2000w-inverter-67214","title":"Samlex 200A Inverter Installation Kit for 2000W Inverter MPN - DC-2000-KIT","description":"\u003cp\u003eThe Samlex DC-2000-KIT is a DC installation kit that connects an inverter to its battery bank. It contains two 10 ft AWG #2 flexible copper cables, one red and one black, with crimped ring lugs for 3\/8 in studs, plus an MRBF-200 200 A marine rated battery fuse assembly and the hardware to secure the cable run.\u003c\/p\u003e\u003cp\u003eSamlex sizes the kit by inverter power. It recommends the DC-2000-KIT for inverters of 1000–1200 W at 12 V and 2000–3000 W at 24 V, based on a 10 ft cable run with up to 3% voltage drop and DC current equal to the fuse rating. The cables are rated 600 V and −50 to 105 °C with an EPR jacket. The MRBF fuse mounts directly on the battery terminal, is ignition protected to SAE J1171 and is rated IP66.\u003c\/p\u003e\u003cp\u003eCheck that your inverter's DC terminals accept 3\/8 in ring lugs before ordering. Samlex notes that some inverters need pin-type lugs, so the supplied lugs may need to be changed. Compare the DC-1000-KIT (100 A) if your inverter falls in a different size range.\u003c\/p\u003e","brand":"Samlex America","offers":[{"title":"Default Title","offer_id":46386284888226,"sku":"67214","price":264.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/67214XL.jpg?v=1765321052"},{"product_id":"samlex-300a-inverter-installation-kit-f-2500w-inverter-67215","title":"Samlex 300A Inverter Installation Kit for 2500W Inverter MPN - DC-2500-KIT","description":"\u003cp\u003eThe Samlex DC-2500-KIT is a DC installation kit that connects an inverter to its battery bank. It contains two 10 ft AWG #2\/0 flexible copper cables, one red and one black, with crimped ring lugs for 3\/8 in studs, plus an MRBF-300 300 A marine rated battery fuse assembly and the hardware to secure the cable run.\u003c\/p\u003e\u003cp\u003eSamlex sizes the kit by inverter power. It recommends the DC-2500-KIT for inverters of 1500–2000 W at 12 V and 4000–6000 W at 24 V, based on a 10 ft cable run with up to 3% voltage drop and DC current equal to the fuse rating. The cables are rated 600 V and −50 to 105 °C with an EPR jacket. The MRBF fuse mounts directly on the battery terminal, is ignition protected to SAE J1171 and is rated IP66.\u003c\/p\u003e\u003cp\u003eCheck that your inverter's DC terminals accept 3\/8 in ring lugs before ordering. Samlex notes that some inverters need pin-type lugs, so the supplied lugs may need to be changed. For a longer run at this size, compare the DC-2500-KIT-XL with 15 ft cables.\u003c\/p\u003e","brand":"Samlex America","offers":[{"title":"Default Title","offer_id":46386284920994,"sku":"67215","price":398.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/67215XL.jpg?v=1765321052"},{"product_id":"samlex-400a-inverter-installation-kit-f-3500w-inverter-67216","title":"Samlex 400A Inverter Installation Kit for 3500W Inverter MPN - DC-3500-KIT","description":"\u003cp\u003eThe Samlex DC-3500-KIT is a DC installation kit that connects an inverter to its battery bank. It contains two 10 ft AWG #4\/0 flexible copper cables, one red and one black, with crimped ring lugs for 3\/8 in studs, plus a 400 A Class T fuse with CFB2-400 fuse holder and snap-on cover and the hardware to secure the cable run.\u003c\/p\u003e\u003cp\u003eSamlex sizes the kit by inverter power. It recommends the DC-3500-KIT for inverters of 2500–3000 W at 12 V and 6500–8000 W at 24 V, based on a 10 ft cable run with up to 3% voltage drop and DC current equal to the fuse rating. The cables are rated 600 V and −50 to 105 °C with an EPR jacket. The 400 A Class T fuse is rated 125 VDC with a 20 kA interrupting capacity and sits in a fiberglass holder with a snap-on cover.\u003c\/p\u003e\u003cp\u003eCheck that your inverter's DC terminals accept 3\/8 in ring lugs before ordering. Samlex notes that some inverters need pin-type lugs, so the supplied lugs may need to be changed. Compare the DC-2500-KIT (300 A) if your inverter falls in a different size range.\u003c\/p\u003e","brand":"Samlex America","offers":[{"title":"Default Title","offer_id":46386285019298,"sku":"67216","price":783.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/67216XL.jpg?v=1765321054"},{"product_id":"samlex-portable-solar-charging-kit-90w-68813","title":"Samlex Portable Solar Charging Kit - 90W MPN - MSK-90","description":"\u003cp\u003e\u003cstrong\u003ePortable Solar Charging Kit - 90W\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSamlex Portable MSK Charging Kits are easy to use! Just unfold, plug in and start charging. Capture the power of the sun without complicated installations, brackets or electrical diagrams. Each Kit comes with a convenient insulated carrying case that also protects the panels when stored.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Kit Includes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3 x 30W Solar Modules for charging 12V Lead Acid Batteries\u003c\/li\u003e\n\u003cli\u003e10 Amp Charge Controller\u003c\/li\u003e\n\u003cli\u003eIncludes a 2-pin bullet adapter for use in solar ready RV's\u003c\/li\u003e\n\u003cli\u003eProtective carrying case\u003c\/li\u003e\n\u003cli\u003e(Battery Not Included)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolar panel is pre-wired with battery clamps for a quick and easy connection, 16’ cable\u003c\/li\u003e\n\u003cli\u003eTurn the panel a few times per day and increase charging by 30%\u003c\/li\u003e\n\u003cli\u003eAdjustable legs allow for maximum sun exposure\u003c\/li\u003e\n\u003cli\u003eFolding crystalline panels in anodized aluminum frames, won’t rust\u003c\/li\u003e\n\u003cli\u003eBuilt-in 10 Amp Charge Controller manages the charge to the battery and prevents overcharging\u003c\/li\u003e\n\u003cli\u003eFor 12V Lead Acid Batteries\u003c\/li\u003e\n\u003cli\u003eIncludes protective carrying case\u003c\/li\u003e\n\u003cli\u003eNOTE: Battery is not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWatts: 90 Watt Solar Module for 12V Lead Acid Batteries\u003c\/li\u003e\n\u003cli\u003eAmps: 10 Amps\u003c\/li\u003e\n\u003cli\u003eWeight: 25.2 (lbs)\u003c\/li\u003e\n\u003cli\u003eWeight: 11.45 (kg)\u003c\/li\u003e\n\u003cli\u003eDimensions: 40.75 x 25.39 x 1.18 (in) Open\u003c\/li\u003e\n\u003cli\u003eDimensions: 1035 x 645 x 30 (mm) Open\u003c\/li\u003e\n\u003cli\u003eWarranty: 10 Year Power Warranty on Solar Panels (Canada\/US)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRecreational Vehicles\u003c\/li\u003e\n\u003cli\u003eOff-grid\/mobile solar systems\u003c\/li\u003e\n\u003cli\u003ePower supply for remote equipment\u003c\/li\u003e\n\u003cli\u003eWater pumping systems\u003c\/li\u003e\n\u003cli\u003eRural electrification\u003c\/li\u003e\n\u003cli\u003eSmall home power systems\u003c\/li\u003e\n\u003cli\u003e12V Lead Acid battery charging system\u003c\/li\u003e\n\u003cli\u003eOther industrial and consumer applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Samlex America","offers":[{"title":"Default Title","offer_id":46386328633506,"sku":"68813","price":660.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/68813XL.jpg?v=1765321878"},{"product_id":"samlex-portable-solar-charging-kit-135w-68814","title":"Samlex Portable Solar Charging Kit - 135W MPN - MSK-135","description":"\u003cp\u003e\u003cstrong\u003ePortable Solar Charging Kit - 135W\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSamlex Portable MSK Charging Kits are easy to use! Just unfold, plug in and start charging. Capture the power of the sun without complicated installations, brackets or electrical diagrams. Each Kit comes with a convenient insulated carrying case that also protects the panels when stored.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Kit Includes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3 x 45W Solar Modules for charging 12V Lead Acid Batteries\u003c\/li\u003e\n\u003cli\u003e10 Amp Charge Controller\u003c\/li\u003e\n\u003cli\u003eIncludes a 2-pin bullet adapter for use in solar ready RV's\u003c\/li\u003e\n\u003cli\u003eProtective carrying case\u003c\/li\u003e\n\u003cli\u003e(Battery Not Included)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolar panel is pre-wired with battery clamps for a quick and easy connection, 16’ cable\u003c\/li\u003e\n\u003cli\u003eTurn the panel a few times per day and increase charging by 30%\u003c\/li\u003e\n\u003cli\u003eAdjustable legs allow for maximum sun exposure\u003c\/li\u003e\n\u003cli\u003eFolding crystalline panels in anodized aluminum frames, won’t rust\u003c\/li\u003e\n\u003cli\u003eBuilt-in 10 Amp Charge Controller manages the charge to the battery and prevents overcharging\u003c\/li\u003e\n\u003cli\u003eFor 12V Lead Acid Batteries\u003c\/li\u003e\n\u003cli\u003eIncludes protective carrying case\u003c\/li\u003e\n\u003cli\u003eNOTE: Battery is not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWatts: 135 Watt Solar Module for 12V Lead Acid Batteries\u003c\/li\u003e\n\u003cli\u003eAmps: 10 Amps\u003c\/li\u003e\n\u003cli\u003eWeight: 35.6 (lbs)\u003c\/li\u003e\n\u003cli\u003eWeight: 16.18 (kg)\u003c\/li\u003e\n\u003cli\u003eDimensions: 59.65 x 24.41 x 1.18 (in) Open\u003c\/li\u003e\n\u003cli\u003eDimensions: 1515 x 620 x 30 (mm) Open\u003c\/li\u003e\n\u003cli\u003eWarranty: 10 Year Power Warranty on Solar Panels (Canada\/US)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRecreational Vehicles\u003c\/li\u003e\n\u003cli\u003eOff-grid\/mobile solar systems\u003c\/li\u003e\n\u003cli\u003ePower supply for remote equipment\u003c\/li\u003e\n\u003cli\u003eWater pumping systems\u003c\/li\u003e\n\u003cli\u003eRural electrification\u003c\/li\u003e\n\u003cli\u003eSmall home power systems\u003c\/li\u003e\n\u003cli\u003e12V Lead Acid battery charging system\u003c\/li\u003e\n\u003cli\u003eOther industrial and consumer applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Samlex America","offers":[{"title":"Default Title","offer_id":46386328666274,"sku":"68814","price":839.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/68814XL.jpg?v=1765321878"},{"product_id":"samlex-solar-charging-kit-100w-30a-68855","title":"Samlex Solar Charging Kit - 100W - 30A MPN - SRV-100-30A","description":"\u003cp\u003eThe Samlex SRV-100-30A is a solar charging kit for keeping RV, boat and off-grid batteries charged. It pairs a 100 W monocrystalline panel with the Samlex SCC-30AB charge controller, a 20 ft AWG #12 wire set with MC4 connectors and the brackets and hardware to mount the panel.\u003c\/p\u003e\u003cp\u003eThe panel delivers 17.8 V at 5.62 A at maximum power, with an open-circuit voltage of 21.3 V, and has an IP65 junction box with bypass diodes. The SCC-30AB is a 30 A PWM controller, switch-selectable for 12 or 24 V batteries, with eight profiles covering flooded, AGM, gel and lithium batteries and an LCD to show charging status.\u003c\/p\u003e\u003cp\u003eThe kit includes four five-hole mounting brackets with stainless bolts, washers, locknuts and well nuts, plus cable clamps, ties and terminals. An inline fuse holder for the battery positive cable is required by the Samlex manual but not included. Samlex lists a 10-year performance warranty to 90% output and 5 years against defects on the panel, and 5 years on the controller, wiring and hardware.\u003c\/p\u003e","brand":"Samlex America","offers":[{"title":"Default Title","offer_id":46386329157794,"sku":"68855","price":707.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/68855XL.jpg?v=1765321889"},{"product_id":"samlex-solar-charging-kit-150w-30a-68856","title":"Samlex Solar Charging Kit - 150W - 30A MPN - SRV-150-30A","description":"\u003cp\u003eThe Samlex SRV-150-30A is a solar charging kit for RV, boat and off-grid battery systems. Samlex lists it with a 150 W panel, a 30 A flush-mount charge controller, 20 ft of connecting wires and aluminum brackets with hardware. Our store listing identifies the controller as the Samlex SCC-30AB.\u003c\/p\u003e\u003cp\u003eSamlex gives the panel's charging current as 8.82 A and its size as 26.0 × 58.03 × 1.39 in at 26.4 lb. The SCC-30AB used in Samlex's SRV kits is a 30 A PWM controller, switch-selectable for 12 or 24 V, with profiles for flooded, AGM, gel and lithium batteries.\u003c\/p\u003e\u003cp\u003eSamlex's current solar pages list the 100 W and 200 W SRV kits, and we could not find a current Samlex specification page for this 150 W kit. Detailed panel voltage figures are not published in the sources we checked, so contact us before you design a system around it.\u003c\/p\u003e","brand":"Samlex America","offers":[{"title":"Default Title","offer_id":46386329190562,"sku":"68856","price":790.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/68856XL.jpg?v=1765321889"},{"product_id":"heise-replacement-lightbar-mounting-brackets-hardware-81145","title":"HEISE Replacement Lightbar Mounting Brackets \u0026 Hardware MPN - HE-RMBK","description":"\u003cp\u003eThe HEISE HE-RMBK is a replacement set of mounting brackets and hardware for HEISE LED light bars. HEISE and our store listing both list it for the DR, DRC, BDR, BDRC, SR and SRC series, so it can replace brackets that were lost, damaged or corroded.\u003c\/p\u003e\u003cp\u003eCheck the series code on your light bar before ordering. The brackets are made for HEISE bars in those series and are not described as a universal mount for other brands.\u003c\/p\u003e\u003cp\u003eHEISE now lists this part as discontinued, and its piece count and material are not published in the sources we checked. HEISE's warranty policy covers mounting brackets for one year; contact us for the coverage on wiring accessories.\u003c\/p\u003e","brand":"HEISE LED Lighting Systems","offers":[{"title":"Default Title","offer_id":46386706120866,"sku":"81145","price":28.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/81145XL.jpg?v=1765328045"},{"product_id":"heise-rocker-switch-illuminated-red-round-5-pack-81209","title":"HEISE Rocker Switch - Illuminated Red Round - 5-Pack MPN - HE-RRS","description":"\u003cp\u003eThe HEISE HE-RRS is a pack of five red round rocker switches. HEISE states it is the same switch used in its relay wiring harnesses, so it suits replacing a worn or damaged harness switch or adding matching switches to a dash or panel.\u003c\/p\u003e\u003cp\u003eEach switch is rated 20 A, and a rubber cover helps protect it against dust and water intrusion. In HEISE harnesses the switch controls a relay, which carries the light's current.\u003c\/p\u003e\u003cp\u003eOur catalog title describes the switch as illuminated, but HEISE's own listing names it only as a red round rocker switch. Voltage, switch type and mounting hole size are not published in the sources we checked, so contact us if you need them before ordering.\u003c\/p\u003e","brand":"HEISE LED Lighting Systems","offers":[{"title":"Default Title","offer_id":46386707464354,"sku":"81209","price":31.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/81209XL.jpg?v=1765328071"},{"product_id":"heise-y-adapter-harness-kit-f-he-wrrk-83384","title":"HEISE Y-Adapter Harness Kit for HE-WRRK MPN - HE-EYHK","description":"\u003cp\u003eThe HEISE HE-EYHK is a Y-adapter harness kit for the HEISE HE-WRRK harness. It lets one HE-WRRK run two HEISE light bars, driving lights or work lights instead of one.\u003c\/p\u003e\u003cp\u003eHEISE's instructions state that each light must be 150 W or less and must have a green connector. The kit includes a Y adapter and an extension, and the extension converts a gray connector to green so a light with a gray connector can be used.\u003c\/p\u003e\u003cp\u003eThis kit works with the HE-WRRK harness and is not a complete harness on its own. HEISE does not publish the wire gauge, and HEISE and our listing give different lengths, so contact us if the length matters for your installation.\u003c\/p\u003e","brand":"HEISE LED Lighting Systems","offers":[{"title":"Default Title","offer_id":46386774212770,"sku":"83384","price":85.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/83384XL.jpg?v=1765329338"},{"product_id":"heise-2-lamp-wiring-harness-switch-kit-83385","title":"HEISE 2-Lamp Wiring Harness \u0026 Switch Kit MPN - HE-DLWH1","description":"\u003cp\u003eThe HEISE HE-DLWH1 is a universal plug-and-play wiring harness for two HEISE lights with Deutsch DT connectors. It includes an on\/off rocker switch, a 12 V DC relay, a 30 A fuse in a waterproof fuse holder and two 2-pin DT connectors, with a 9 ft lead to the lights.\u003c\/p\u003e\u003cp\u003eHEISE lists it for use with two HEISE lights of 150 W or less each. The switch triggers the relay, which carries the light current from the battery through the fuse, so the switch circuit stays light.\u003c\/p\u003e\u003cp\u003eHEISE's instructions call for a 13\/16 in hole for the switch. The wire gauge and relay contact rating are not published in the sources we checked. Connect it only to a 12 V system.\u003c\/p\u003e","brand":"HEISE LED Lighting Systems","offers":[{"title":"Default Title","offer_id":46386774180002,"sku":"83385","price":71.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/83385XL.jpg?v=1765329338"},{"product_id":"heise-dt-pigtails-w-wires-10-pack-83386","title":"HEISE DT Pigtails with Wires - 10-Pack MPN - HE-DTPIGTAIL","description":"\u003cp\u003eThe HEISE HE-DTPIGTAIL is a pack of ten Deutsch DT connector pigtails with wire. HEISE makes them for building custom harnesses, and our store listing describes them for wiring to HEISE LED lights that do not come with a plug.\u003c\/p\u003e\u003cp\u003eHEISE lists them for light bars up to 150 W and wire runs up to 10 ft. Our store listing pairs them with the HEISE HE-SLWH1 one-lamp and HE-DLWH1 two-lamp DT harness kits.\u003c\/p\u003e\u003cp\u003eOur store listing gives the pigtail length as 12 in. HEISE does not publish the pin count or wire gauge, and HEISE now lists this part as discontinued, so check the availability shown on this page.\u003c\/p\u003e","brand":"HEISE LED Lighting Systems","offers":[{"title":"Default Title","offer_id":46386774311074,"sku":"83386","price":73.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/83386XL.jpg?v=1765329340"},{"product_id":"samlex-2500w-inverter-install-kit-92086","title":"Samlex 2500W Inverter Install Kit MPN - DC-2500-KIT-XL","description":"\u003cp\u003eThe Samlex DC-2500-KIT-XL is a DC installation kit that connects an inverter to its battery bank. It contains two 15 ft AWG #2\/0 flexible copper cables, one red and one black, with crimped ring lugs for 3\/8 in studs, plus an MRBF-300 300 A marine rated battery fuse assembly and the hardware to secure the cable run.\u003c\/p\u003e\u003cp\u003eSamlex sizes the kit by inverter power. It recommends the DC-2500-KIT-XL for inverters of 1500–2000 W at 12 V and 4000–6000 W at 24 V, based on a 15 ft cable run with up to 5% voltage drop and DC current equal to the fuse rating. The cables are rated 600 V and −50 to 105 °C with an EPR jacket. The MRBF fuse mounts directly on the battery terminal, is ignition protected to SAE J1171 and is rated IP66.\u003c\/p\u003e\u003cp\u003eCheck that your inverter's DC terminals accept 3\/8 in ring lugs before ordering. Samlex notes that some inverters need pin-type lugs, so the supplied lugs may need to be changed. The DC-2500-KIT-XL has the same AWG #2\/0 cable and 300 A MRBF fuse as the DC-2500-KIT, with 15 ft cables instead of 10 ft for installations where the inverter sits farther from the battery.\u003c\/p\u003e","brand":"Samlex America","offers":[{"title":"Default Title","offer_id":46387054936226,"sku":"92086","price":538.7,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/92086XL.jpg?v=1765333782"},{"product_id":"heise-atp-wiring-harness-switch-kit-1-lamp-universal-92823","title":"HEISE ATP Wiring Harness \u0026 Switch Kit - 1 Lamp Universal MPN - HE-SLWH2","description":"\u003cp\u003eThe HEISE HE-SLWH2 is a universal plug-and-play wiring harness for a single HEISE light with an ATP connector. It includes an on\/off rocker switch, a 12 V DC relay, a 30 A fuse and a 9 ft lead to the light.\u003c\/p\u003e\u003cp\u003eHEISE lists it for use with one HEISE light of 160 W or more, which makes it the harness for larger light bars that exceed the 150 W limit of the HEISE DT harnesses. The switch triggers the relay, which carries the light current from the battery through the fuse.\u003c\/p\u003e\u003cp\u003eHEISE does not publish an upper wattage limit in its feature list, the wire gauge or the relay contact rating. Contact us if your light is very large. Connect it only to a 12 V system.\u003c\/p\u003e","brand":"HEISE LED Lighting Systems","offers":[{"title":"Default Title","offer_id":46387079250082,"sku":"92823","price":71.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/92823XL.jpg?v=1765334166"},{"product_id":"t-h-marine-led-battery-tester-93429","title":"T-H Marine LED Battery Tester MPN - BE-EL-51004-DP","description":"\u003cp\u003eThe T-H Marine LED Battery Tester, MPN BE-EL-51004-DP, gives a quick check of a 12 V DC battery system. T-H Marine describes it as suitable for all 12 V DC battery systems, with easy-to-read LED lights.\u003c\/p\u003e\u003cp\u003eT-H Marine says the tester helps assess both battery state and alternator output, so it can be used at rest to check charge level and with the engine running to see whether the charging system is working.\u003c\/p\u003e\u003cp\u003eT-H Marine does not publish the voltage each LED represents, the connection method or dimensions in the sources we checked. Use it as a quick indicator, and confirm any suspected battery fault with a full load test.\u003c\/p\u003e","brand":"T-H Marine Supplies","offers":[{"title":"Default Title","offer_id":46387112902818,"sku":"93429","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/93429XL.jpg?v=1765334645"},{"product_id":"rigid-industries-2021-bronco-mod-bumper-triple-sr-m-fog-light-kit-97162","title":"RIGID Industries 2021+ Bronco MOD Bumper Triple SR-M Fog Light Kit MPN - 46731","description":"\u003cp\u003eThe RIGID 2021+ Bronco MOD Bumper Triple SR-M Fog Light Kit, part number 46731, fits three SR-M lights on each side of the Ford Performance Heavy Duty Modular Bumper for 2021 and newer Ford Bronco. It is made for that bumper and is not a universal fog light kit.\u003c\/p\u003e\u003cp\u003eThe kit includes six SR-M lights: two SAE fog, two drive and two spot. RIGID rates the SAE fog lights at 15 W and 1179 raw lumens, the drive lights at 23 W and 2376 raw lumens, and the spot lights at 15 W and 1584 raw lumens. All operate from 9 to 36 V, and six yellow covers are included to change the light color.\u003c\/p\u003e\u003cp\u003eRIGID lists vehicle-specific brackets and hardware, vibration isolators, four Deutsch-to-flying-lead connectors and two harnesses with switches and relays. Our store listing describes the brackets as stainless steel with a UV- and abrasion-resistant powder coat. RIGID's wiring instructions call for a 3\/4 in hole for each switch.\u003c\/p\u003e","brand":"RIGID Industries","offers":[{"title":"Default Title","offer_id":46387284115618,"sku":"97162","price":1039.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/97162XL.jpg?v=1765337462"},{"product_id":"samlex-bgw-40-waterproof-battery-guard-40-amps-97822","title":"Samlex BGW-40 Waterproof Battery Guard - 40 Amps MPN - BGW-40","description":"\u003cp\u003eThe Samlex BGW-40 is a battery guard: a switch placed between the battery and its loads that disconnects them when the battery voltage falls too low, protecting the battery from deep discharge. It carries 40 A continuously and also disconnects on overvoltage, overcurrent and over-temperature. It auto-detects 12 V or 24 V systems.\u003c\/p\u003e\u003cp\u003eTen programs set the disconnect and reconnect voltages. The default disconnects at 10.5 V and reconnects at 12 V on a 12 V system (21 V and 24 V on 24 V), and other programs range from 9.5 V up to 12 V disconnect for different battery types. When the voltage stays low for 15 seconds the alarm output and LED come on, and the unit disconnects one minute later; it reconnects 5 seconds after the voltage recovers.\u003c\/p\u003e\u003cp\u003eThe housing is IP66 rated, and self-consumption is 3.2 mA. Main connections are M6 threaded studs, and a remote off input and a 100 mA status\/alarm output allow a switch, buzzer or relay to be added. Programs are set by briefly connecting the CONFIG wire to negative, and settings are kept when the battery is disconnected. Samlex lists a two-year limited warranty.\u003c\/p\u003e","brand":"Samlex America","offers":[{"title":"Default Title","offer_id":46387308953762,"sku":"97822","price":144.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/97822XL.jpg?v=1765337903"},{"product_id":"samlex-bgw-60-waterproof-battery-guard-60-amps-97823","title":"Samlex BGW-60 Waterproof Battery Guard - 60 Amps MPN - BGW-60","description":"\u003cp\u003eThe Samlex BGW-60 is a battery guard: a switch placed between the battery and its loads that disconnects them when the battery voltage falls too low, protecting the battery from deep discharge. It carries 60 A continuously and also disconnects on overvoltage, overcurrent and over-temperature. It auto-detects 12 V or 24 V systems.\u003c\/p\u003e\u003cp\u003eTen programs set the disconnect and reconnect voltages. The default disconnects at 10.5 V and reconnects at 12 V on a 12 V system (21 V and 24 V on 24 V), and other programs range from 9.5 V up to 12 V disconnect for different battery types. When the voltage stays low for 15 seconds the alarm output and LED come on, and the unit disconnects one minute later; it reconnects 5 seconds after the voltage recovers.\u003c\/p\u003e\u003cp\u003eThe housing is IP66 rated, and self-consumption is 3.2 mA. Main connections are M6 threaded studs, and a remote off input and a 100 mA status\/alarm output allow a switch, buzzer or relay to be added. Programs are set by briefly connecting the CONFIG wire to negative, and settings are kept when the battery is disconnected. Samlex lists a two-year limited warranty.\u003c\/p\u003e","brand":"Samlex America","offers":[{"title":"Default Title","offer_id":46387308986530,"sku":"97823","price":192.1,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/97823XL.jpg?v=1765337903"},{"product_id":"samlex-waterproof-battery-guard-200-amps-99444","title":"Samlex Waterproof Battery Guard - 200 Amps MPN - BGW-200","description":"\u003cp\u003eThe Samlex BGW-200 is a battery guard: a switch placed between the battery and its loads that disconnects them when the battery voltage falls too low, protecting the battery from deep discharge. It carries 200 A continuously and also disconnects on overvoltage, overcurrent and over-temperature. It auto-detects 12 V or 24 V systems.\u003c\/p\u003e\u003cp\u003eTen programs set the disconnect and reconnect voltages. The default disconnects at 10.5 V and reconnects at 12 V on a 12 V system (21 V and 24 V on 24 V), and other programs range from 9.5 V up to 12 V disconnect for different battery types. When the voltage stays low for 15 seconds the alarm output and LED come on, and the unit disconnects one minute later; it reconnects 5 seconds after the voltage recovers.\u003c\/p\u003e\u003cp\u003eThe housing is IP66 rated, and self-consumption is 3.2 mA. Main connections are M8 threaded studs, and a remote off input and a 100 mA status\/alarm output allow a switch, buzzer or relay to be added. Programs are set by briefly connecting the CONFIG wire to negative, and settings are kept when the battery is disconnected. Samlex lists a two-year limited warranty.\u003c\/p\u003e","brand":"Samlex America","offers":[{"title":"Default Title","offer_id":46387382059170,"sku":"99444","price":381.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/99444XL.jpg?v=1765339049"},{"product_id":"connect-ease-3-12v-battery-parallel-quick-connect-system-104733","title":"Connect-Ease 3 12V Battery Parallel Quick Connect System MPN - RCE312VRV","description":"\u003cp\u003eThe Connect-Ease 3 12V Battery Parallel Quick Connect System, MPN RCE312VRV, connects three 12 V batteries in parallel so they work as one larger 12 V bank. Parallel wiring keeps the system at 12 V while adding the capacity of each battery, which extends runtime for RVs, off-grid setups and boondocking away from shore power.\u003c\/p\u003e\u003cp\u003eConnect-Ease describes plug-and-play connections and lists the system as compatible with lead-acid, AGM and lithium batteries. Connect-Ease does not publish the cable gauge for this kit. Connect-Ease states the system handles 60 to 240 A of DC power.\u003c\/p\u003e\u003cp\u003eThis version does not include the solar splice connection; that is on the RCE312SLR. Connect-Ease does not publish the cable lengths, terminal sizes or fusing in the sources we checked, so measure your battery layout and contact us before ordering.\u003c\/p\u003e","brand":"Connect-Ease","offers":[{"title":"Default Title","offer_id":46387579814050,"sku":"104733","price":189.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/104733XL.jpg?v=1765342544"},{"product_id":"connect-ease-4-12v-battery-parallel-quick-connect-system-104734","title":"Connect-Ease 4 12V Battery Parallel Quick Connect System MPN - RCE412VRV","description":"\u003cp\u003eThe Connect-Ease 4 12V Battery Parallel Quick Connect System, MPN RCE412VRV, connects four 12 V batteries in parallel so they work as one larger 12 V bank. Parallel wiring keeps the system at 12 V while adding the capacity of each battery, which extends runtime for RVs, off-grid setups and boondocking away from shore power.\u003c\/p\u003e\u003cp\u003eConnect-Ease describes plug-and-play connections and lists the system as compatible with lead-acid, AGM and lithium batteries. Connect-Ease lists 6 gauge marine-grade tinned wire with a 60 to 110 A capability. Connect-Ease states the system handles 60 to 240 A of DC power.\u003c\/p\u003e\u003cp\u003eThis version does not include the solar splice connection; that is on the RCE312SLR. Connect-Ease does not publish the cable lengths, terminal sizes or fusing in the sources we checked, so measure your battery layout and contact us before ordering.\u003c\/p\u003e","brand":"Connect-Ease","offers":[{"title":"Default Title","offer_id":46387579846818,"sku":"104734","price":265.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/104734XL.jpg?v=1765342544"},{"product_id":"connect-ease-3-12v-battery-parallel-system-w-solar-104735","title":"Connect-Ease 3 12V Battery Parallel System with Solar MPN - RCE312SLR","description":"\u003cp\u003eThe Connect-Ease 3 12V Battery Parallel System with Solar, MPN RCE312SLR, connects three 12 V batteries in parallel so they work as one larger 12 V bank. Parallel wiring keeps the system at 12 V while adding the capacity of each battery, which extends runtime for RVs, off-grid setups and boondocking away from shore power.\u003c\/p\u003e\u003cp\u003eConnect-Ease describes plug-and-play connections and lists the system as compatible with lead-acid, AGM and lithium batteries. Connect-Ease does not publish the cable gauge for this kit. Connect-Ease states the system handles 60 to 240 A of DC power.\u003c\/p\u003e\u003cp\u003eIt also has a heat-shrinkable accessory splice connection that Connect-Ease describes for a solar panel input. Connect-Ease's feature list also says third-party accessories are needed, so the splice is a connection point rather than a complete solar hookup. Connect-Ease does not publish the cable lengths, terminal sizes or fusing in the sources we checked, so measure your battery layout and contact us before ordering.\u003c\/p\u003e","brand":"Connect-Ease","offers":[{"title":"Default Title","offer_id":46387579945122,"sku":"104735","price":199.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/104735XL.jpg?v=1765342546"},{"product_id":"camco-power-grip-rv-12-30amp-circuit-analyzer-dogbone-integrated-surge-protection-108601","title":"Camco Power Grip RV 12\" 30Amp Circuit Analyzer Dogbone - Integrated Surge Protection MPN - 55461","description":"\u003cp\u003eThe Camco Power Grip 12 in Circuit Analyzer Dogbone, MPN 55461, is a short adapter cord for RV shore power that adds diagnostic LEDs and surge protection at the connection. Our store listing says the LEDs quickly identify issues, alerting you if the power-supply wiring is incorrect, and that it acts as an RV surge protector.\u003c\/p\u003e\u003cp\u003eThe Power Grip handles give a firm hold for plugging in and unplugging. Our catalog title describes it as a 30 A dogbone, but the connector configuration in our store description is inconsistent and Camco's own page was not available to confirm it.\u003c\/p\u003e\u003cp\u003eConfirm both connector ends against your pedestal and RV cord before ordering. An adapter never increases the power available from the pedestal, and the surge joule rating and LED meanings are not published in the sources we checked.\u003c\/p\u003e","brand":"Camco","offers":[{"title":"Default Title","offer_id":47479412162722,"sku":"108601","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/108601XL.jpg?v=1785230766"},{"product_id":"camco-power-grip-rv-18-30amp-circuit-analyzer-dogbone-integrated-surge-protection-108600","title":"Camco Power Grip RV 18\" 30Amp Circuit Analyzer Dogbone - Integrated Surge Protection MPN - 55460","description":"\u003cp\u003eThe Camco Power Grip 18 in Circuit Analyzer Dogbone, MPN 55460, is a short adapter cord for RV shore power that adds diagnostic LEDs and surge protection at the connection. Our store listing says the LEDs quickly identify issues, alerting you if the power-supply wiring is incorrect, and that it acts as an RV surge protector.\u003c\/p\u003e\u003cp\u003eThe Power Grip handles give a firm hold for plugging in and unplugging. Our catalog title describes it as a 30 A dogbone, but the connector configuration in our store description is inconsistent and Camco's own page was not available to confirm it.\u003c\/p\u003e\u003cp\u003eConfirm both connector ends against your pedestal and RV cord before ordering. An adapter never increases the power available from the pedestal, and the surge joule rating and LED meanings are not published in the sources we checked.\u003c\/p\u003e","brand":"Camco","offers":[{"title":"Default Title","offer_id":47479410852002,"sku":"108600","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/108600XL.jpg?v=1785230766"},{"product_id":"camco-power-grip-rv-adapter-15amp-male-30amp-female-108603","title":"Camco Power Grip RV Adapter - 15Amp Male\/30Amp Female MPN - 55223","description":"\u003cp\u003eThe Camco Power Grip RV Adapter, 15 A Male to 30 A Female, MPN 55223, connects a 30 A RV power cord to a standard 15 A household outlet. It has a 15 A male (NEMA 5-15P) plug and a 30 A female (NEMA TT-30R) receptacle, with Power Grip handles for a firmer hold when plugging in and unplugging.\u003c\/p\u003e\u003cp\u003eThe connection is limited to 15 A, 125 V \/ 1875 W, by the smaller 15 A end, so it lets a 30 A RV plug into a household outlet for light loads only. An adapter changes the plug shape; it never increases the power the outlet can supply.\u003c\/p\u003e\u003cp\u003eCamco lists the plug-style adapter with Power Grip handles. Our store listing gives the wire as 14\/3. Keep the plug and receptacle dry and fully seated.\u003c\/p\u003e","brand":"Camco","offers":[{"title":"Default Title","offer_id":47479413571746,"sku":"108603","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/108603XL.jpg?v=1785230771"},{"product_id":"camco-power-grip-18-dogbone-adapter-50-amp-male-30-amp-female-108604","title":"Camco Power Grip 18\" Dogbone Adapter - 50 Amp Male\/30 Amp Female MPN - 55173","description":"\u003cp\u003eThe Camco Power Grip 18 in Dogbone Adapter, 50 A Male to 30 A Female, MPN 55173, connects a 30 A RV power cord to a 50 A pedestal outlet. It has a 50 A male (NEMA 14-50P) plug and a 30 A female (NEMA TT-30R) receptacle, with Power Grip handles for a firmer hold when plugging in and unplugging.\u003c\/p\u003e\u003cp\u003eThe adapter is rated 125 V \/ 3750 W, so the RV still draws no more than 30 A even though the pedestal outlet is 50 A. An adapter changes the plug shape; it never increases the power the outlet can supply.\u003c\/p\u003e\u003cp\u003eCamco lists the 18 in dogbone with Power Grip handles. Our store listing gives the wire as 10\/3, 100% copper, flame-retardant heat-resistant PVC sheath. Our store listing states a limited 12-month warranty. Keep the plug and receptacle dry and fully seated.\u003c\/p\u003e","brand":"Camco","offers":[{"title":"Default Title","offer_id":47479413866658,"sku":"108604","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/108604XL.jpg?v=1785230774"},{"product_id":"camco-power-grip-12-u0022-dogbone-12-u0022-15am-30af-125v-1875w-cetl-108605","title":"Camco Power Grip 12\\\\u0022 Dogbone 12\\\\u0022, 15AM\/30AF, 125V\/1875W, cETL MPN - 55183","description":"\u003cp\u003eThe Camco Power Grip 12 in Dogbone, 15 A Male to 30 A Female, MPN 55183, connects a 30 A RV power cord to a standard 15 A household outlet. It has a 15 A male plug and a 30 A female receptacle, with Power Grip handles for a firmer hold when plugging in and unplugging.\u003c\/p\u003e\u003cp\u003eThe connection is limited to 15 A, 125 V \/ 1875 W, by the smaller 15 A end, so it lets a 30 A RV plug into a household outlet for light loads only. An adapter changes the plug shape; it never increases the power the outlet can supply.\u003c\/p\u003e\u003cp\u003eCamco lists the 12 in dogbone with Power Grip handles. Keep the plug and receptacle dry and fully seated. The Camco 55165 is a similar 12 in 15 A male to 30 A female dogbone with the same rating and 90° heads.\u003c\/p\u003e","brand":"Camco","offers":[{"title":"Default Title","offer_id":47479413899426,"sku":"108605","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/108605XL.jpg?v=1785230775"},{"product_id":"camco-power-grip-dogbone-15-amp-male-30-amp-female-adapter-12-108606","title":"Camco Power Grip Dogbone 15 Amp Male \/ 30 Amp Female Adapter - 12\" MPN - 55165","description":"\u003cp\u003eThe Camco Power Grip 12 in Dogbone, 15 A Male to 30 A Female, MPN 55165, connects a 30 A RV power cord to a standard 15 A household outlet. It has a 15 A male (NEMA 5-15P) plug and a 30 A female (NEMA TT-30R) receptacle, with Power Grip handles for a firmer hold when plugging in and unplugging.\u003c\/p\u003e\u003cp\u003eThe connection is limited to 15 A, 125 V \/ 1875 W, by the smaller 15 A end, so it lets a 30 A RV plug into a household outlet for light loads only. An adapter changes the plug shape; it never increases the power the outlet can supply.\u003c\/p\u003e\u003cp\u003eCamco lists the 12 in dogbone with Power Grip handles. Our store listing gives the wire as 10\/3, 100% copper, flame-retardant heat-resistant PVC sheath. Our store listing states a limited 12-month warranty. Keep the plug and receptacle dry and fully seated. The Camco 55183 is a similar 12 in 15 A male to 30 A female dogbone with the same rating.\u003c\/p\u003e","brand":"Camco","offers":[{"title":"Default Title","offer_id":47479414161570,"sku":"108606","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/108606XL.jpg?v=1785230778"},{"product_id":"smartplug-50-amp-angled-rv-dual-configuration-cordset-30-109253","title":"SmartPlug 50 AMP Angled RV Dual Configuration Cordset - 30' MPN - R50304A","description":"\u003cp\u003eThe SmartPlug 50 A Angled RV Cordset, MPN R50304A, is a 30 ft shore power cord rated 50 A, 125\/250 V. The vehicle end is an angled SmartPlug connector that locks into a SmartPlug 50 A inlet, and the park end is a 50 A, 125\/250 V, 4-pin push-type park plug for a standard RV pedestal.\u003c\/p\u003e\u003cp\u003eThe SmartPlug connector engages with one hand and has a one-piece PVC overmolded cord seal; SmartPlug lists it as IP56 rated. The angled head keeps the cord close to the side of the RV, and the strain relief and flexible cable make it easier to coil and store.\u003c\/p\u003e\u003cp\u003eThis cordset needs a SmartPlug 50 A inlet on the RV, such as the BM50S, BM50PW, BM50PG or BM50PB, which are sold separately; it is not a replacement for a standard twist-lock RV cord unless that inlet is fitted. SmartPlug lists a seven-year warranty against defects.\u003c\/p\u003e","brand":"SmartPlug","offers":[{"title":"Default Title","offer_id":47479470588066,"sku":"109253","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/109253XL.jpg?v=1785231513"},{"product_id":"smartplug-30-amp-angled-rv-dual-configuration-cordset-30-109252","title":"SmartPlug 30 AMP Angled RV Dual Configuration Cordset - 30' MPN - R30303A","description":"\u003cp\u003eThe SmartPlug 30 A Angled RV Cordset, MPN R30303A, is a 30 ft shore power cord rated 30 A, 125 V. The vehicle end is an angled SmartPlug connector that locks into a SmartPlug 30 A inlet, and the park end is a TT-30P, 30 A, 125 V, 3-pin push-type park plug for a standard RV pedestal.\u003c\/p\u003e\u003cp\u003eThe SmartPlug connector engages with one hand and has a one-piece PVC overmolded cord seal; SmartPlug lists it as IP56 rated. The angled head keeps the cord close to the side of the RV, and the strain relief and flexible cable make it easier to coil and store.\u003c\/p\u003e\u003cp\u003eThis cordset needs a SmartPlug 30 A inlet on the RV, such as the BM30PG, BM30PW, BM30PB or BM30NT, which are sold separately; it is not a replacement for a standard twist-lock RV cord unless that inlet is fitted. SmartPlug lists a seven-year warranty against defects.\u003c\/p\u003e","brand":"SmartPlug","offers":[{"title":"Default Title","offer_id":47479470620834,"sku":"109252","price":358.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/3170\/5250\/files\/109252XL.jpg?v=1785231512"}],"url":"https:\/\/marinerswarehouse.com\/collections\/automotive-rv-electrical-power-accessories.oembed?page=3","provider":"Mariners Warehouse Shop","version":"1.0","type":"link"}